E 4200 and not possible to view IPTV on computer

Hello!
Maybe someone could help me with my problem.
I have bought Linksys E 4200. I'm connected up by protocol PPPoE by my provider, but IPTV doesn't work on my computer.
I use the program IP-TV Player and/or VLC Player and both don't work. I only see the list of channel, but any channel doesn't load. Before I used the router DLink Dir 300, and everything was Ok. 
Could you give me some advise how I can tune my router. 

Two ways to check the IP address for IPTV.
a) On the TV, go to network settings
b) From your router, check the DHCP table of the clients, if your TV is connected to your network, its IP should be listed.

Similar Messages

  • Muse lost and not possible to install it again

    Hi,
    After installing Creative Cload on my laptop I also installed Creatiev Cloud Muse cc, But I dont find this program on my compueter and I can't install it again. When I open the window of Creative Cload on mu computer, Lightroom 5 and Muse CC are on the top with a green checkmark. But I can't find Muse CC on my computer. Also the church egine can't find this program.
    Hope someone can help me.
    FransvG

    Hi Romit,
    To answer your question, i,m using Windows 7
    I realy hope you can help me. But, if not., do you who can?
    Kindly regards
    Frans
    Op dinsdag 12 november 2013 schreef Romsinha ([email protected]):
        Re: Muse lost and not possible to install it again  created by
    Romsinha <http://forums.adobe.com/people/Romsinha> in *Creative Cloud
    Download & Install* - View the full discussion<http://forums.adobe.com/message/5835693#5835693

  • I have got an IPhone 5. It has been locking itself  and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any suggestion ?

    I have got an IPhone 5. It has been locking itself  and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any recomandation ?

    Sorry, but the warranty for the phone is only valid in the country where you bought the device, and you can't send it in, Apple does not ship internationally.
    Has the phone been officially unlocked? Only the carrier can unlock an iPhone.
    iPhone: About unlocking

  • I started download iOS 6 to New iPad, but it's stopped and not possible to re-start again

    I started download iOS 6 to New iPad, but after some time it's stopped and not possible to re-start it.
    Thank You very much for Yrs help

    Are you doing this OTA or via iTunes on your computer?
    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • Missing comments and notes fields for view columns

    Hello,
    I am missing the comments and notes fields for view columns in the relational model of DM. For the table columns these fields are present, so it would be nice to make this available for views too. The Designer import should be adapted too to import those fields.
    Joop

    Hi Joop,
    My question is about the import of Designer for those fields. This is still not solved, even not in rel 4.0
    In fact even DM 3.3 imports comments, notes and comments in RDBMS from Designer repository.  Though comments and notes are not accessible through UI they are there and you can include them in custom report.
    Comments and notes are accessible through UI in DM 4.0
    Philip

  • I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife now wants to change the Apple ID on the 13" to her Apple ID.  How do I do this and not loose the information on that computer?

    I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife uses the 13" and now wants to change the Apple ID on the 13" to her Apple ID.  How do I do this and not loose the information on that computer?

    Hello Teddy53149 and welcome to Apple Support Communities,
    Follow this procedure:
    Change your OS X account name and home directory name - Apple Support
    As they recommend and as always when you're messing with administrator accounts back everything up first.

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • My ipod is synced with my old computer, how do i put all my songs(purchased and not purchased) on to my new computer?

    my ipod is synced with my old computer, how do i put all of my songs (purchased and not purchased) on to my new computer?

    Copy the entire iTunes folder from the old computer to the new computer.

  • Iphone loads negative messages (-5, eg) and not able to view mail

    My mail is acting so weird - my red circle on the mail icon always shows negative new messages (-4 or -8, etc.).
    I deleted the account and re-input my info and saw it load all the messages, but after loading, none can be viewed.. it actually seems locked up. It only displays ONE message - the most recent, but I can't even open that.
    I was running 2.0.1. Same result after I updated to 2.0.2
    I have restarted the iphone, reset network settings, reset the phone - all to no avail! Is it just broken?

    I'm in the same boat and currently on hold with Apple - aaarrrgggghhh! My email is a Verizon account (POP). Connection doctor tells me everything is connecting, I've downloaded the most recent mail update, and I've tried many solutions posted on forums that have not worked. The mail icon is in the dock but does nothing when selected. When I manually open up the mailbox through File>New Viewer Window, all mailboxes are there but are empty. Any ideas? Am I looking at an archive and install? Thanks!

  • Overwrite-exit not possible in view controller

    Hi all,
    Within a standard abap webdynpro application I see two columns for pre-exit and post-exit within the methods tab. I can't see a column for the overwrite-exit. Within transaction SE24 I can see all three columns.
    Does someone have an idea why the overwrite-exit is not visible within the webdynpro component?
    Thanks,
    Richard

    I found it myself. The overwrite-exit is only possible in enhancement pack 1 (7.01). We are still on 7.0.
    Kind regards,
    Richard

  • Latest update of iWork is bugged - spanish language and not working Charts view in Inspector in Numbers

    Latest iWork update ("iWork Update 6", version 9.1) got my Numbers broken. I'm Polish user and I use Numbers in Polish language. After latest iWork Update I can't use Numbers - everything is fine, everything works, everything is in Polish, but...
    When I select Charts in Numbers' Inspector it is in Spanish and it does not work at all - looks like broken view/nib/whatever. It is not random - I mean I've installed the update on one Mac (10.6.8) and it is in Spanish, I've installed it on my MacBook and it is in Spanish and I did not installed it on my iMac and it is working! That implicites that the "iWork Update 6" makes Numbers broken (again, not working Charts inpsector pane and Spanish instead of Polish).
    However - when I change user language from Polish to English, log out and log in, than run Numbers, everything looks ok - Charts inpector pane is in English and it does work. That is kinda workaround, however this is not a solution!
    I tried to install iWork from the CD (so not updated), however it doesn't work either - update must be somewhere hidden in system. I need this repaired, because it makes Numbers unusable and makes my work harder :|
    Amadeusz
    BTW This report bug is probably for Apple Developers/Apple Staff, however even as I'm registered developer, I can't find a way to contact them/you

    This problem was already described (2011/08/11) here and I reported it as Bug #  9937633
    Yvan KOENIG (VALLAURIS, France) mardi 13 septembre 2011 10:26:23
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Saving and not able to view

    Hey looking for any sort of help or info someone has to help me out. I saved a bunch of jpg's png's gif's pdf's and html's all those files with those endings won't let me open or view them I saved them on a flash drive. If it helps at all there a little more. Other files like fla's psd's and ai's files can be loaded and used. And I almost forgot, when I tried to open and view one of the html files i have on Safari this is what I got to pop up instead of the page I designed "¥ÒgOçiƒ‰ ç}Á#Ÿ03³-¤Â\¤ƒ°wð ¥s0¼Ì*&#127;       ‘ò=‰õs.lPY„Œ{ôõfò&#129;iÐ0œø Á…" One more thing to add if it helps. I can't delete any of the jpg's png's gif's pdf's and html's files out of the trash of the flash drive and the trash is taking up over a GB of memory
    Any thoughts...
    Or ideas??

    Ok well things just worse now its saying when I'm trying to open up the other files that worked. Its now saying that the psd file can't be read in Photoshop along with fla's in Flash and finally ai with Illustrator.

  • Why can I only get 20 pages and not more when viewing images on my ipad2

    How do I go to additional pages after 20 on my ipad2

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
    Do a malware check with some malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • TS3367 My wife just activated her Iphone5 and when we received a FaceTime call today both her phone and the IPad rang. When we answered on the IPad we could only see the calling party in a portrait view and not a landscape view. When we turned the IPad to

    My wife just activated her IPhone5 today and when we received a call to FaceTime both her phone and IPad rang. When we answered the call on the IPad the callers image only appeared in the portrait mode and any attempt to rotate the Ipad to the landscape mode did not change anything. Any suggestions?

    Ortho25 wrote:
    ...  when we received a call to FaceTime both her phone and IPad rang. ...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    Ortho25 wrote:
    ... any attempt to rotate the Ipad to the landscape mode did not change anything. ..
    Settings > General > Lock Rotation..
    Understanding the Side Switch
    http://support.apple.com/kb/HT4085
    Orientation Lock
    Not all Apps offer this feature..

  • Is there a way to make the folder invisible to some user and others possible to view it, but on the same network ?

    We share files from a Mac os x server, leopard version 10.6.8, Local. We are using mac and windows users on that server. We would like a specific users to have access to the server. For now, all people connected on our network have access to the mac os x server.
    Thanks alot Allan
    Best regards.
    Elias Daou

    What you need to do is, in Server Admin, navigate to your Share Points and set ACE's in the Access Control List.

Maybe you are looking for

  • Cisco Anyconnect "Login Failed"

    in debug ldap 255, i see this message: memberOf: value = CN=L-NOUSA-VPN_Access,OU=Security Groups,OU=NOUSA,OU=PROD,DC=wmh-ag,DC=org [378534]                mapped to Group-Policy: value = GroupPolicy_WM-Wisconsin [378534]                mapped to LDA

  • 10.6.7 iTunes and Maybe General Sound Issue

    I updated to 10.6.7 today and now iTunes will not open and I am getting a (-200) error. Also, when I adjust the volume, I am no longer getting that 'doink doink' sound, so I don't know if they're both related. I still have functioning sound through o

  • Getting list of used fonts in TextFlow

    Hi! I'm wondering how i can get a list of fonts used in a TextFlow - especially usefull, when working with embedded fonts loaded at runtime. The idea is to be able when loading new content into textflow, to preload the used fonts before the text is s

  • JSP xml to html

    I keep getting this error when I try to transform an xml file into html. org.apache.jasper.JasperException: Unable to open taglibrary http://jakarta.apache.org/taglibs/xsl-1.0 : null Here is the jsp file <%@taglib uri="http://jakarta.apache.org/tagli

  • Why did column host display red  in list of Tcode st22

    dear expert,   Suddenly i found a question. It was why in some dump column host displayed  red  when i excecuted st22 . But some did not displayed red host.   Hope to answer.