E-51. How to configure mail button to a "new txt m...

Hi Guys, I have two Nokia E-51. In one phone the programable mail button was preset to "new txt message" on short press. I cannot program the same on my second set, because it does not give me option of "new text message" or "new mms" or "new e-mail". HHHeeeellllpppp please!

Sounds like you are using different firmware versions. Firstly try *#0000# and check the numbers are the same. If they are, remove the battery and check the Product code, it will look something like 05#####. If these numbers are different, then you have got the phones from different sources and these may have restricted the firmware functionality. If they are the same, backup the phones first, then type *#7370# and then enter the Lock Key (probably 12345). This will reformat the phone to factory settings. Then try the messaging button. You will then need to restore your backup. K.

Similar Messages

  • How to configure Mail Services in B1

    Hi All,
    I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
    Thanks & Regards
    pankaj Sharma.

    Hi Pankaj Sharma,
    The suggestion above would be a good solution to you.  However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
    Thanks,
    Gordon

  • How to configure mail using portal collaboration

    hi Guys..,
    pls tel me
    how to configure mail using portal collaboration and its uses..
    thanks
    regards
    kamal

    Hi,
    Two Configure Email, first
    You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
    Then create a Groupwaretransport
    implement SSO between your Mail server and your EP...
    and finally
    Create a Mail service...
    More Info is available at below link..
    http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
    and have a look at the thread raised by be on Calender Configuration...
    Collaboration calendar : No transport has been configured for the calendar
    Regards,
    Srinivas

  • How to Configure Mail in ECC5.0

    Dear All,
    Please guide how to configure Mail in ECC5.0
    i have Activate / enabled  SMPT  using  the T-code :  SICF
    using Transaction : SCOT
    for SMTP Connection :
    mail host :  localhost
    mail port : 25
    Code Page :  ????????????  what should i give  i have given 1100 SAP  internal  (correct or wrong) Please guide
    Supported Address Type:
    Selected Internet
    what should i give in "Address Area"  and "output format for SAP documents"
    when i am sending a mail using : SWBP  and checking in SOST message error 272 i am getting.
    Regards
    Shankar

    Dear all,
    we are not using Exchange Server.
    we enabled the Port 25 . we are able to telnet to the mail server.
    Using SICF activate SMTP port.
    when i am trying to send  using SBWP t-code : getting
    "error during send process " when we check further  " you do not have a sender address in the  choosen communication method".
    Regards
    Shankar.

  • How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

  • How to configure mail service in DRM 11.1.2.3.500

    How to configure mail service in DRM 11.1.2.3.500.
    There is a feature in Workflow Models to Notify users by sending mail.
    Can anyone help me find from where to configure mail service.

    Hi,
    If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
    From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows...

  • TS3276 how to configure Mail ?

    Hi !
    How to configure Mail only to fetch a specific amount of messages on its first use?
    I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
    Thanks a lot!

    Hi !
    How to configure Mail only to fetch a specific amount of messages on its first use?
    I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
    Thanks a lot!

  • How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

    Hi,
    I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
    Thanks,
    Sagar Pawar.

    Hi Sagar Pawar ,
    First you need to set the email notification :
    Kindly review :
    12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
    Manage Events / Incidents / Problems (Doc ID 1368036.1)
    12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
    Regards
    Ansari

  • How do i mail merge with the new Pages and Numbers?

    How do I mail merge with the new Pages and Numbers?
    On Pages 09 I have a document that draws variable data from a spreadsheet created in Numbers.
    With the new Pages and Numbers program update, my links are lost and I am unable to see how to correct this.

    Thanks Peter,
    very disappointing.
    My Pages 09 keeps opening in the new one.
    I dont think they want me to be a loyal customer anymore.
    They changed Final Cut Pro, so now I use Premier Pro
    Aperture 3 has been left behind so now I moved to Lightroom 4.
    And now Pages 5 does not have a vital component, so back to Word.
    Sad day
    Thanks again

  • When we click turminate button in eclipse new txt file has to be created ?

    when we click turminate button in eclipse new ,txt file has to be created ?
    how can we do this............??

    abenstex wrote:
    That really would be a pity, because the final answer might be interesting...;-)Pending a definition of "turminate button", it wouldn't be too difficult to generate a new txt file on pressing it. No idea why you'd want to, though

  • How to write a code for  open new txt file in swing

    hai all,
    now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
    plz give me that code ! very urgent
    Advance Thanks !
    RSK

    Swing Tutorial:
    http://java.sun.com/docs/books/tutorial/uiswing/index.html
    Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
    If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
    note: don't use the word urgent because it implies that your problem is more important than others.

  • How to configure Share Button in Mountain Lion?

    I have just updated my MBP to Mountain Lion. Going to give Safari a bash as I liked the look of some of the new features, for one the Share Button.
    However, when I try to share something by email it opens Chrome and shares it using a Gmail account I use for work stuff that I don't remember specifying on any of my Apple devices so have no idea why it has defaulted to using this one. I use an @me.com account for the mac mail client and want to share emails using this.
    Any ideas how can configure the new Share Button on Mountain Lion to do this would be appreciated.
    Thanks,
    Chris

    Hi you all,
    I´ve been trying to acomplish the opposite without success. I just updated from snow leopard to mountain lion. I only use web based gmail since I find it more usefull. I used to have a small program called gmail notification on SL that among other things poped out a small safari page to send an email every time I choosed to email something from the options on an item. In other words it used web based gmail to send attachments. eg. I would select a word document, hit sec button, select send email... and a safari web page with my attachment on it apeared that would let me include address and text to it.
    Gmail notification does not work on ML. I tried to download it without success. I´d love to have web based gmail open ready to write the email when I hit share button on ML but apple Mail app shows up every time I do this. If I select chrome as my email reader from options in Mail then chome would pop up but only on the default starting page.
    Any ideas?
    Thanks

  • How to configure Mail Alerts in SAP R/3 System.

    Hi,
      I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
    Regards,
    Kiran.

    HI
    I think there is no standard functionality in sap u need to develop with abaper help with proper logic
    if it is for venijula s_alr_87009936  try this t.code
    Thanks & Regards
    Phaneendra
    Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

  • How to configure mail connection

    Dear Experts,
    I received an application and I want to set a automatic email system to send feedback to applicant . When I create a planned activity that its type is 001 (mail confirmation of receipt). Then I click on Email-letter button, an error "No entry made for type of communication" appeared. I created 1 entry (is email address) in infotype 0105 (Comunication) for this applicant.I have adready set Mail Connection (through IMG->..->Recruitment...->Applicant Activities-> Mail Connection).
    Can You tell me Where are my mistakes and the rule to run an automatic email system.
    Thanks for your help
    Best regards,
    Edited by: Sushi300509 on Oct 27, 2009 4:23 AM

    Does it matter if I have to access the OWA url using a trailing folder name? I access OWA like so, https://owa.example.com/owa, I know it's a bit redundant, but I don't know how to make mail aware of that, or even if it's a problem? If I leave off the URL I can connect but not authenticate, with the URL it's obviously an invalid hostname. Anyone familiar with this issue?

  • How to configure mail server

    Hi All,
    we are in a process of configure mail server in one of our sap instance.
    i have done the following settings,
    1. In t-code sicf      under virtual host SAPCONNECT, 
    2.   I  have added  in host data * : *
    3.under handler list CL_SMTP_EXT_SAPCONNECT.
    4. now in scot i have added my deault domain under "settings -> default domain " <company name.com>
    5.on double clicking on SMTP i have added the following entries
      SMTP CONNECTIONS : mail host :  smtp.gmail.com
                                               port : 465
                                           code page : 0
    SUPPORT ADDRESS TYPE : i have set internet address to *
    did i miss any of the steps in configuring the SMTP mail server.
    after sending the mail when i look in to t code  sost the message number displays "672"
    please advice how can i  configure mail server for incoming and outgoing
    Thanks in advance,
    Vardhan

    Hello Vardhan,
    I suggest you to go through the below links and cross check the configuration.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Jan 19, 2012 3:16 AM

Maybe you are looking for