E-520 images still not showing up after latest RAW update.

Hi,
I did the new RAW update today, but still just blank boxes when I try to import images from my Olympus E-520. Anyone else having this problem?
I'm running 10.4.11

Hi,
I'd like to update this post. Seems the RAW files ARE importing to Aperture, however prior to import they just show up as blank boxes.
In other words, when I select the import arrow and then select my CF card, then select the project I want to import to, the screen fills with blank preview boxes. I hit "Import All" anyway and then the actual images do import to the Aperture library.
Also, I am still unable to see the the previews in the desktop finder window or in the Preview program.
Again, is anyone else having this problem or know what may be causing it?
Thanks very much
Was very excited that Aperture was finally supporting the E520, now I'm a bit frustrated.
Christian

Similar Messages

  • Mail not showing accounts after ios 7 update on iPhone 5

    After the ios 7 update to my iPhone 5 mail does not show my accounts. Specifically there is nothing below the word Accounts. The rest is working fine and still connected to my three accounts. However it no longer shows accounts.

    thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works.  i did all the steps but no luck.
    So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net. 
    With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera,  they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money.  im glad they didnt charge me for the new camera though as it still didnt work.
    anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware.  i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release.  not overly impressed with the whole process.
    i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2.  anyway will update if i get any further progress.

  • Start Menu not showing up after 8.1 Update

    I am a MSDN subscriber and after applying the Windows 8.1 Update (release April 2nd to MSDN) the Start Menu is not showing up as described in the Key Note.
    Is anyone else having this issue?  Its as if the updates were never applied.
    Thanks

    Hi,
    Would you please help to provide more detailed description of your concern?
    I suppose that once the computer restart, the desktop show up instead of Start screen by default.
    One settings can change this behavior which is newly added in Windows 8.1 update 1: Show store app in taskbar
    Kate Li
    TechNet Community Support

  • Attachments still not opening even after new September Update??

    I hope someone might be able to shed some light on this. After the new update I sent myself some word, excel, pdf attachments thinking to try the tilt/landscape feature in viewing attachments, but nothing. The attachment still shows up as a bar with the file name, but nothing happens when I click on it, as the intro video on Apple said to click on it and the attachment should open and you can see them in landscape mode?? Anyone else having this problem, all the other updates were succefully downloaded.
    SK

    I hope someone might be able to shed some light on this. After the new update I sent myself some word, excel, pdf attachments thinking to try the tilt/landscape feature in viewing attachments, but nothing. The attachment still shows up as a bar with the file name, but nothing happens when I click on it, as the intro video on Apple said to click on it and the attachment should open and you can see them in landscape mode?? Anyone else having this problem, all the other updates were succefully downloaded.
    SK

  • Buttons not showing up after graphics card update

    I updated my Nvidia GeForce 460 to version 347.88. I also had a Firefox update on March 13, 2015. Now my Back, Reload, Bookmark, Home, Hello, and Menu buttons will not show up. My tabs are blocked out, and I don't have an New Tab nor Exit button on them. My Exit button for Firefox is about half normal, can still see the Min/Max and other half of the Exit button, but it seems shaded.

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Separate Issue;
    Your System Details shows;
    Installed Plug-ins
    Shockwave Flash 17.0 r0
    Shockwave Flash 16.0 r0
    Having more than one version of a program may cause issues.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Flash Player '''Version 17.0.0.134<br>https://www.adobe.com/products/flashplayer/distribution3.html'''

  • Airport card not showing up after new Security Update

    Just did the new Security Update and lost all internet with my Tibook. Getting message that no Airport card is installed. Not showing up in the System Profiler. Update has apparently killed my Airport card. Any solutions?
    Message was edited by: Michael Sastre

    I know that fella User — he's always messing things up! I'm glad you got the better of him this time.

  • Sms not showing even after ios8.1 update

    I been having problem as sms keep disappearing. Always need to restart iphone 6  to show back my sms. I cant reset phone as new as alot of my sms are very important. Please resolve this issue asap.

    Everything is turn on (Unless you have the proper guide)
    The problem is after restarting all my sms will show. But after i start using other apps on the phone and or after received sms. The rest of the sms just cannot be found (not always but happen frequently). Always gotta reboot.
    I had even went to the svc centre located at plaza singapura last week and ask the staff. She ran a check and told me is a common problem (apple is aware) and the next ios update will resolve the issue as i told her i cant erase all contents for my phone and set as a new phone. She did a check and told me that my sms apps keep crashing.
    I updated my iphone6+ to ios 8.1 and my sms still disappearing this morning. This is really annoying as i need to restart or reboot my iphone 6+ afew time every single day.

  • DVI port not working anymore after latest BIOS update on T410s

    Hi all,
    after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
    Thanks and cheers!

    Do you mean the DVI port on the docking station?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Mac Pro 2nd Gen not shutting down after latest leopard update 10.5.3

    I have a mac pro 8 core 2nd gen machine (August 2007) just updated from 10.5.2 to 10.5.3 and immediately after doing so the machine usually will not shut down by it self. It goes through the shut down process, exits finder but then the grey spinning dial just keeps going. I left it for 30 minutes like that, and then realised I had to manually force power down by holding the power button. It does that now all the time, except once. I don't know what could be causing this, works fine otherwise, but really annoying as the machine is located in a difficult to reach spot- so when I finish work I have to reach around and hold down the power button to get it to turn off - wouldnt' mind to fix that.

    try these steps
    Mac Pro SMC reset
    http://docs.info.apple.com/article.html?artnum=304123
    PRAM Reset
    http://support.apple.com/kb/HT1379

  • Photo/Edit-In CS6. psd image does not show in LR after save/close.

    Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

    This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
    If the behavior you describe follows a <save> in CS6 it is not normal.
    This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
    BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • My iphone 4 screen has gone blank and its still on it vibrates when i put it on charge ive tried turning it off and the screen is still not showing anything please help

    my iphone 4 screen has gone blank and its still on it vibrates when i put it on charge ive tried turning it off and the screen is still not showing anything please help

    Hi Ellen,
    Welcome to Apple Support Communities.
    It sounds like your iPhone 4 has a dim or blank black screen but responds to some commands like enabling vibrate. I understand this may be a frustrating situation, but the troubleshooting suggestions in the article below will help you solve the issue.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If your screen is too dim, too bright, or you see only faint images
    Try to adjust the brightness. If the screen doesn’t respond when you adjust the brightness, open several apps to make sure it’s not an issue with only one app.
    If you have a screen protector, try removing it. Try removing your case if it includes a screen protector.
    If you see the issue in multiple apps, restart your device.
    If restarting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Take care,
    -Jason

  • Images do not show up

    I can get some .gif images to show up in my Dreamweaver HTML
    page and can see them when I upload the document.
    Other images are not showing up.
    The images that show up and do not show up are in the same
    "images" folder. All of them have been uploaded.
    The images that show up were created by a software program
    that made them be .gif images.
    The images that do not show up were made in Adobe
    Illustrator. I then imported them into Adobe Photoshop and saved
    them as .gif, .jpg. png. and even used the "save for web" feature.
    I also imported the image into Fireworks and saved it as .gif and
    .jpg.
    None of the copies of the image that I created are showing up
    in a webpage.
    I have used the image icon to place the image. I also went to
    Insert | Image and put the image in that way. Plus I tried the drag
    and drop method to get the image onto the page. In many cases I can
    see the image on the page in Dreamweaver, but not when I upload the
    page. Not even the alt tags with the red X show up online. Each
    image does have an alt tag.
    I have no clue what to do because other .jpg and .gif files
    are showing up as images. Oh, and when I used a .gif version as the
    background, it worked as a background.
    If you know why an image I made will not appear after being
    linked to a webpage and uploaded, please tell what you know. I am
    stumped on this one.
    Thank you for any assistance you can give me.
    Baffled,
    Ntropi

    quote:
    Originally posted by:
    bregent
    Always include a url when you have questions about your web
    pages.
    Sorry, newbie to these forums here.
    here's a link to one of them:
    http://www.onlineschoolsurveys.com/banner_trial_2.html
    With this page I tried using a table and put the images in
    spots in the table. The empty spots are where there should be
    images. The two images that are there were made by other people.
    This link is actually quite obnoxious.
    http://www.onlineschoolsurveys.com/oss_banner.html.
    With this one, again the only image that shows up is one that I
    made originally as a bmp export out of Snap Surveys, turned into a
    gif in Photoshop (I think). In the table toward the bottom with the
    pink squares there should actually be two pink squares, one should
    have an image in it. Being a practice page that I did not expect
    others to look at I left the obnoxious background. If this is too
    annoying, I can remove the background and repost.
    Did you define a site in the site manager?
    I'm sorry but I do not know what this means. I regularly have
    a site at www.onlineschoolsurveys.com. The first link goes to a
    page that is actually a part of the website- I tried using a
    template I know works thinking that maybe the non-templated page
    was flawed. So if you are asking if these were loaded to an active
    website: yes, I regularly have pages at that website, but no, these
    pages are not intended to be a part of my regular website. I was
    just using that space to practice.
    Do the linked images exist within the defined site?
    Yes, the images were uploaded. They should exist in an image
    folder. Although it may be really stupid for me to make a link to
    an unprotected list of files, here is the list of images in my
    images folder:
    http://www.onlineschoolsurveys.com/images/
    Since I am new to using a message board for help, please advise me
    if I should not post such directories in the future.
    Thanks for your quick response.
    Mel

  • I am trying to create an responsive HTML5 output, but images are not showing up.

    When I preview my output, the images are note showing up. It is simply the blank outline of the image with the little image icon in the top left corner.
    As it is compiling I see the message "Warning: Image maps are not converted to relative size". Is there something in the setting that I need to change, or is that even the problem?

    Can you check your output folder: are the images copied to your output? If they are missing, are the images listed in the Project Manager pod in RoboHelp?
    The warning is unrelated. Since image maps work with pixel coordinates, you can't simply make them responsive. You are probably using an image map in your project. This is causing the warning. It is not a problem since the image map will still work. But if the image map is very large, it may give a bad experience on smaller screens. You may have to decide whether to change or remove the image map if you want to support mobile.

  • HT4623 itune is not showing iphone after updateing to IOS6

    itune is not showing iphone after updateing to IOS6

    Have you tried the Basic Troubleshooting Steps...
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Pasted image does not show when imported to AI

    Mac OS 10.4.11 - Acrobat CS4. I made a contact sheet of images in Bridge which was saved as a PDF. In Acrobat I pasted another image (different size ratio) and saved again. However, when I placed the image in Illustrator the pasted image did not show, only the original contact images. It does not show at preview level either, but when the PDF is opened it is definitely there. I tried to 'flatten' it but cannot find a option that works.See attached file.

    I would love to help you, but I'm totally lost as to what you are trying to do.
    Here are my questions:
    Mac OS 10.4.11 - Acrobat CS4.
    There really isn't an Acrobat CS4. There is Acrobat 9 that shipped with CS4. But let's go one.
    I made a contact sheet of images in Bridge which was saved as a PDF.
    OK, that's good, I understand what you're doing.
    In Acrobat I pasted another image (different size ratio) and saved again.
    OK, this is where you lost me. Acrobat does not have a paste image ability. Exactly how did you get that image onto the Acrobat page? You copied from where? You pasted how? This is totally screwey.
    However, when I placed the image in Illustrator the pasted image did not show, only the original contact images.
    Placed what image? The original PDF contact sheet? Why are you trying to put it into Illustrator? There's no reason I can think of to do such a thing.
    PDF is usually the final output form. It isn't a page layout tool to place into other programs.
    It does not show at preview level either, but when the PDF is opened it is definitely there.
    Still trying to figure out what you talking about.
    I tried to 'flatten' it but cannot find a option that works.See attached file.
    You have totally lost me. There is no "flatten" in PDF? That's in Photoshop? What are you doing???

Maybe you are looking for