E 63 Youtube viewing problem

E 63 Youtube viewing problem.
When i click on the youtube movie clips first Real Player opens for a second and then it shows
First tries to connect.
"Unable to connect" after that it shows
"Rtsp Temp" not saved. Save now? and gives a Yes and No option.
If you press Yes , it shows saves to Galary
If you open the Galary u will find the file is saved in Galary Stream links.
When u try to open it, it says Define defaulat access point and stops.
Please let me know how to solve this.
Regards,
Chritopher

i had this on my phone
try this
go to menu > media > real player > options > settings > streaming > network > default access point
change it to the access point u would use to connect to the internet
u will have to keep changing this option if u plan to use different wlan connections
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Similar Messages

Youtube view problem in p990i

hii. sir i cant view youtube & vuclip video when i click watch video.....it says Buffering it goes 0 to 100% and nothing happens........i put till 15 min same no video plz help me
Thanks
Muqeet

yes iam having stable wifi conection.......in india 3g is just now launch......but not started.....in my home iam having wifi....

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

I have received the alert that my version of Safari no longer supports Youtube viewing. I am running version 5.1.10 on OS 10.6.8. Is there an update or a newer Safari version that is compatible with my OS?

No, not without upgrading to a higher version of the Mac OS. However, the easiest thing to do is get another browser for use with sites that don't like older versions of Saari. I always have a secondary browser on any computer, Mac or PC. For our Macs, I install FireFiox alongside Safari when setting up a new computer.
As FireFox is updated sometimes weekly, YouTube should not have a problem with it.
https://www.mozilla.org/en-US/firefox/all/

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Maintenance view problem "No data maintenance Authorization; Display only"

Maintenance view problem
Question 1>>>>
> I have created a table with Display/maintenance allowed and technical setting Data class - APPL0 (master data, transparent tables).
>> Then I have created a maintenance view thought utilities->table maintenance generator where i have specified the Authorization group as &NC& (w/o auth. group)
->and also created a function group and specified in the maintenance screen-> I have selected maintenance type as one step-> i have given the overview screen number->and in Recording routine i have selected - no, or user ,recording routine.
>>> Now when i go to transaction SM30 and put the table name and press on maintain button I get a information box saying "No data maintenance Authorization; Display only".... and it only displays the data.
my problem is I want to enter data through maintenance view (SM30).
2nd Question >>>> once i create a function group for maintenance view how can i assign a transaction for this. (as if i do it as we do for a module pool program it gives me error)Thank you.
kailash

SE93. Enter a transaction name. Create. In the pop up enter a title and select 'Transaction with parameters'.
Next screen fill the following;
Transaction 'SM30'
Check 'Skip first screen'
In the table control at the bottom of the screen
Name of screen field 'VIEWNAME'
Value <your table name>
Name of screen field 'SHOW'
Value 'X'
Save.
Job done.

Adobe Content Viewer problem. Please Help me...

Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
thanks

Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
Thank you for your patience.
Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
Re: Adobe Content Viewer problem. Please Help me...
created by Bob Levine in Digital Publishing Suite - View the full discussion
As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
Bob
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Flash Player viewing problems

I'm having full screen video viewing problems on facebook which I hope to get resolved.When selecting a video to view on Facebook the video goes to about a 2" high strip across the bottom of the player. When this happens I have to click the full screen icon on the bottom right corner of player to view the video, so far this problem is only happening on FB. I would like to know what's causing this problem and how to get it resolved. I've got the current player version and all my Computer Software and Drivers are up to date
My System Info
Gateway Laptop
Windows 7 HP w/SP1
IE11
Flash player current 15.0.0.233
Norton 360

Yes, it says it is enabled:
Name:
Shockwave Flash Object
Publisher:
Adobe Systems Incorporated
Type:
ActiveX Control
Version:
10.1.82.76
File date:
Date last accessed:
Today, March 08, 2012, 20 minutes ago
Class ID:
{D27CDB6E-AE6D-11CF-96B8-444553540000}
Use count:
24711
Block count:
0
File:
Flash11e.ocx
Folder:
C:\WINDOWS\system32\Macromed\Flash

My illustrator CS6 is having screen viewing problems. Everything is blurry

My illustrator CS6 is having screen viewing problems. Everything is blurry

All files look almost as if they are in a draft mode. Doesn't matter witch file I open they all look the same. but very thing is printing out fine. Also I tried creating a test user and down loaded the trial version and it works fine.

Cover Flow view problems

Hello Everyone and congratulations for the Support Forum!
I am experiencing Cover Flow view problems since I installed iTunes 10 on my windows based laptop.
I here enclose address of a picture to let you better understand which the problem is.
http://img684.imageshack.us/i/itunescoverflow.jpg/
I kindly ask you for providing a solution on the issue.
Thanks and Regards,
Antonio

Hi,
I found the solution here : http://discussions.apple.com/thread.jspa?messageID=12623727&#12623727
I rebuilt my library...
Enjoy :-D

Design View - problems, but does it matter?

Another design view question - I've looked through other
posts but not seen anything that's similar.
(Firstly, can't give a URL as I'm sensibly(?) doing a site
redesign offline...)
I've got a page that consists of three columns - each floated
left, each with nested divs (the nested divs are fixed width).
In design view, everything was fine with this structure - as
was preview in browser, and the page validates with DWCS3's
checker. But adding content to the first of the columns (within a
nested div) made the next two columns drop below the first in
design view - although DWCS3 validation and previewing is still
fine.
Through judicious deleting etc., I've found that it was a
floated element in a nested div within the first column, that
caused the subsequent elements to drop below the first column.
So my main question is - should I be worried by the design
view problems, or is It just an inconvenience?
(And if there's any other obvious problems I'm inviting by
structuring the page this way, please feel free to (gently) point
it out...!).
Thanks, Matt.

> So my main question is - should I be worried by the
design view problems
Yes. I'd say more, but I cannot see your page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"theboyfromthefens" <[email protected]>
wrote in message
news:fgaou7$hgv$[email protected]..
> Another design view question - I've looked through other
posts but not
> seen
> anything that's similar.
>
> (Firstly, can't give a URL as I'm sensibly(?) doing a
site redesign
> offline...)
>
> I've got a page that consists of three columns - each
floated left, each
> with
> nested divs (the nested divs are fixed width).
>
> In design view, everything was fine with this structure
- as was preview
> in
> browser, and the page validates with DWCS3's checker.
But adding content
> to
> the first of the columns (within a nested div) made the
next two columns
> drop
> below the first in design view - although DWCS3
validation and previewing
> is
> still fine.
>
> Through judicious deleting etc., I've found that it was
a floated element
> in a
> nested div within the first column, that caused the
subsequent elements to
> drop
> below the first column.
>
> So my main question is - should I be worried by the
design view problems,
> or
> is It just an inconvenience?
>
> (And if there's any other obvious problems I'm inviting
by structuring the
> page this way, please feel free to (gently) point it
out...!).
>
> Thanks, Matt.
>

Aperture 2 black viewer problem

Are there still other users out there having the black viewer problem??
I'll first describe my problem as follows:
On one image when making the basic exposure, brightness and saturation adjustments there were no problems with the viewer. Also when adjusting with highlights and shadows again no problem. But as soon as I started making adjustments in Levels using luminance the viewer went completely black. If I unchecked the box in Levels the picture would come back, but as soon as it was checked again the dreaded black viewer. The adjustments were done in the browser/viewer mode. Too my surprise when I switched to full screen mode the full viewed image with the the adjustments was perfectly fine. But when going back to the browser/viewer the viewer was black again. One more curious note is that after leaving this image for about a half an hour and coming back to it there was no black viewer to be found. Usually I would quit Aperture to get rid of the black viewer, but in this case I did not have to.
By the way I have an ATI Radeon X800 XT graphics card in my dual 2.0 Power Mac G5 and 4.5 Gigs Ram

I very rarely have this problem on my old Powerbook 1.33 GHz 17". Since 2.1 I haven't encountered it. However, the simplest way to overcome it is to go into Full Screen (press F), do 1 simple adjustment (such as increase brightness by .1), go back to Window View (press F again), undo the adjustment (decrease brightness by .1) - et voilà. Takes around 20 secs on my Mac.
For me, it's annoying but no deal-breaker.
Cheers,
k.

Windows Explorer Viewing Problem

Hi,
I would definitely appreciate some help. I am probably doing something wrong. I installed the DNG Codec so I could view my DNG files in Windows Explorer. I am running Windows 7.
Unfortunately after installing, I still cannot view the DNG files in Windows Explorer.    Instead all I see in Windows Explorer are the icons of the water, mountains, and clouds each file.
I'm sure I have done something wrong but can't figure out what.   Thank you for any information or advice you can share.

Sorry to hear about your viewing problems as well.   I can now see DNG files in Windows Explorer from files are are on my pc, but Windows Explorer will not let me view them from DNG files I have saved to a DVD.   Now that seems really strange.   Hopefully our viewing problems will be solved soon. Thanks.

Regarding bdc(views problem in mm01 while uploading the data)

hi experts,
i have coded a bdc in which i m using mm01 and extending the material to the different plant ,but here in some cases depending upon the material the views get changed for solving this i have to deselect and again select the views which i want and also i have to provide the valuation type for this material, so plz suggest me how to rectifie the views problem.......

Ravi,
Do one thing.Develop some temporary BDC programs for different material with required views.
Finally develop a final program.In that internal table loop ,put case statement on material
when 'mat1' .
take the relevant code from above temporary progarms and copy here.
when '2'.
endcase.
At last delete all temporary programs.
Hope your problem will get solved
Don't forget to reward if useful.

SharePoint 2010 Datasheet view problem - Office 2007 database engine download not fixing the issue

We rolled out new laptops (Dell Latitude E7440)/desktops with 64-bit Windows 7 and 64-bit Office 2013 a couple of weeks ago. We installed the 2007 Access Database Engine to enable Datasheet views on our SharePoint 2010 site for our employees, and it worked
before Thanksgiving. However, after the holiday, datasheet view is not working for anyone. I have my old 64-bit Dell laptop with 64-bit Office 2010/2007 Access Database Engine, and it still works there.
I have tried the x86 2007 Access Database Engine, the 2010 Access Database Engine, the Office 2013 Access Runtime, with 32-bit and 64-bit IE (trying any combinations to see if I can get datasheet views to work).
The one obvious difference is the new laptops have Office 2013. Has anyone run into this before, and is there a solution when the standard 2007 Access Database Engine download does not fix the datasheet view problem?

Coworker figured it out. After the 2007 Access Database Engine is installed, go to Internet Explorer, Tools menu --> Compatibility View Settings, and add your SharePoint website to the list. Your SharePoint datasheet list views should start working
after that. Might be something particular to Internet Explorer 11.

Flash Player 11.7.700.169 and Youtube videos viewing problem

I have just updated to the latest version of Flash Player 11.7.700.169 I cannot view many of my favorite YouTube as it ask me over and over again to update to the latest version . This is the latest version and I did it 4 times in arow. Always unable to watch many Youtube videos now. Anyone had encounter the same problem? I have Vista and Explorer 9. This just happen this morning. Didn't have any problem yesterday before this morning.Can someone tell me what is wrong and help me fix this annoying issue? Thank you

I'm having the same issue; non-HTML5 videos won't play. Specifically they start for a couple seconds and then freeze. I'm running Windows XP and Firefox.. I tried de-selecting hardware acceleration, increased the local storage, and I don't know what else to do. XP, Firefox, and Flash are all the latest versions.
This has only been for the last 2-3 weeks, and the only things that have changed are updated Flash, updated Firefox, and supervisor installed Norton while I was on vacation.
Please, any suggestions?
ETA: And just like that, it's working! I think that I probably should have restarted the computer after changing my settings yesterday. Or not; still confused but relieved.

E 63 Youtube viewing problem

Similar Messages

Maybe you are looking for