E 71 turkey languange fixed problems new software

e 71 new software fixed problems turkey languange HELP ME ? 
501.21.001
10-08-2010
RM-346
Nokia E71-1  (344.09)

That might occur sometimes with firmware update.
You can do one of 2 things:
1) to wait , and reinstall the firmware again, because sometimes Nokia add language packs according to country you are using the phone from.
2) to go to the nearest Nokia Care Center ,and ask them to install the turkey language pack.
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Similar Messages

  • Can these problems be fixed by new software?

    Are the problems we're all having something that new firmware could fix or some update? Or is the whole "iPod Classic" a pipe dream/lost cause?

    What exactly is your problem?

  • I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

    I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

    Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router.  For more information on Time Machine, check these Web pages:
    Time Machine FAQs
    Time Machine Troubleshooting

  • I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

    I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1"  When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list.  If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application".  I checked and there is nothing under the "purchases" in my App store.  Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store.  Please try again".  Just want to know how do to fix.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • Problems with ipod battery life AND new software

    First of all, I'm not 100% sure if my ipod is fifth generation... it's a 30 GB and I've had it since December 2006. This just seemed to be the only category it fit into.
    But here we go: I have two major problems with my ipod that have arisen in only a period of a couple days.
    First of all, my battery life suddenly got REALLY REALLY bad. I know there are already a bunch of threads with people complaining about their battery life, but mine is much worse. The battery life did progressively get a little worse over the past few weeks, but it was nothing major. But I turned my ipod on the other day, RIGHT after fully charging it, mind you, and within 2-3 minutes the battery was halfway discharged and in about 5 minutes it was almost dead.
    And a couple of times, I had my ipod plugged into my iBook to charge, and the iBook went into sleep mode because I left it alone for a while. But after a couple hours I came back and the battery level was LOWER than when I plugged it in!!!! What's going on with this thing?
    And then to make matters worse, I finally broke down and downloaded the new ipod software the other day (sorry I can't remember the version, but it's the most recent). Everything seemed OK until I turned on my ipod the next day. With the old software, when I would select "Music>" and then "Artists>" it would go to the list of artists like it's SUPPOSED to.
    But now, when I select "Artists>" it then goes to a list entitled "Artists" and my ONLY option is "All>". If I click "All>" then it takes me to a second list called "All Albums" and my only option again is "All>". When I click it again, it takes me to a list called "All Songs" with NOTHING in it. At first, I was afraid the update had deleted all the music off my ipod, but I plugged it back into my computer and according to iTunes, everything was still there as if nothing had happened.
    Is there anything I can do to remedy either of these problems? I am so frustrated with this thing, considering both of these things happened rather suddenly and the fact that my ipod is not even a year old and it's not like I've been abusing it or anything.
    Message was edited by: tyty415

    I've had both exact problems (listed below) within days of each other just like you. This is extremely effing frustrating and it appears Apple isn't doing sh|t about it.
    Problem 1: Battery constantly discharges even when ipod is turned off.
    Problem 2: After upgrading firmware to 1.2.2, all my content (songs, podcasts, everything) was gone.
    I'm glad to say I was able to fix problem 2 after reading about reverting back to version 1.2.1. There are instructions in this forum on how to do it. If you are like me, you'll have to download the 1.2.1 files from Apple's website because they were no longer on my computer.
    This dieing/dead battery problem is a major effing pain in the a$$. Like you say, the effing thing is dead after minutes. The only way it can be used for any length of time is to leave it plugged in to a charger.
    No one seems to have a solution which is even more upsetting than the problem. Hey Apple, I want my money back!
    DM

  • 4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

    4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

    Let me try again, Chenks. I'm a technical person by profession, and so can get deeper into things like this, but I have not attempted to use these methods of communication in the past. I'm trying to get some feedback to Apple on their worsening a product and really messing with existing customer configurations. I'll try to break things up below.
    1. Configuration:
    Existing Apple TV and Mac Mini configuration in place since December 2010.
    Three Apple TVs, one in Family Room for music and movies, one in Master Bedroom for music and movies, the third one in the Living Room for music only.
    I'm using iTunes as library. (Probably an obvious statement, but wanted to mention that.)
    2. Pre 4.2.1
    No problems at any location since configuration finalized and all equipment installed in December.
    Since December, Family Room entertainment equipment was updraded to a new Sony Bravia 3D, and a new Pioneer receiver. The Master Bedroom still has the original Toshiba 32HLC56 TV. That unit has only one HDMI input. I'm using the built-in speakers. This TV/Monitor is about fives years old.
    3. Problem
    I updated the software in two of the Apple TVs to 4.2.1. I updated the Family Room device and the Master Bedroom device. I had not updated the Living Room device.
    After updating to 4.2.1, the Family Room equipment works fine. That's the location with the newer TV and receiver.
    The Master Bedroom has different problems with different movies: e.g. "The Little Mermaid:" video, no audio. "The Lion King:" movie wont start at all.
    Additionally, in the Master Bedroom some movies work fine, other movies start but immediately go into pause mode. Pressing pause button on Apple remote will not initiate start of movie, screen does "flicker" for a moment but movie does not start to play, showing only the last frame that had been streamed.
    4. Not really a problem for me.
    Fortunately for me, I had not updated the Apple TV in the living room so I used it to troubleshoot the problem. Initially I thought it was a defective Apple TV in the Master Bedroom. I took the unit to the Apple Store in town and they exchanged it for me. I brought the replacement Apple TV home but I did not install it immediately.
    While testing the Master Bedroom set up once again to make it was working for our afternoon movie watching, I was again reminded that a software update was available. That message came up because it was the unit I had brought over from the Living Room. I proceeded to update the Apple TV to the new software version (4.2.1).
    As soon as I "updated" the software in the Apple TV to the new 4.2.1, the same problems manifested themselves. At that point I suspected that the problem was with 4.2.1, and not with the hardware.
    I called Apple Support and went through a series of troubleshooting techniques. We tested the Apple TV with the new 4.2.1 installed in it. This is the unit which originially in the Living Room. Under the direction of the Apple TV support technician, I used the Family Room gear and the Master Bedroom gear to try and isolate the problem to hardware or software.
    We eliminated the following as potential problems:
    a. TV speakers in the Master Bedroom
    b. HDMI cable
    c. Ethernet connection
    5: Conclusion:
    Fortunately for me, again, the Apple TV that the Apple Store had given me that morning still had 4.1.1. So I installed that unit in the Master Bedroom and everything started working normal again.
    6. Side note:
    An interesting observation: In early March I copied several movies from the Mac Mini to my iPad and some to my wife's iPad. All movies worked fine on our flight out and while we were away.
    My wife recently (about a week ago) updated the software in her iPad. and now some of the movies that played just fine on her iPad are exhibiting the same problems as the Master Bedroom TV when it is connected to an Apple TV with software 4.2.1.
    Apple has been trying to fix some problems in 4.2 when it released 4.2.1. I make that observation based on recent articles I found on the web. Most likely the Apple engineers were trying to fix things in one place and broke them in another.
    Clear as mud, isn't it?
    7. In closing:
    I'm good to go, I just need to remember not to update the software in the Master Bedroom Apple TV. I want to keep that unit at 4.1.1. It's possible that Apple might come to the realization that they hosed things for some of us. Because I do have three units in my home, I can experiement with the other two units should a "fix" come out. I can then update one of the two devices, connect it to the Master Bedroom TV, and see if the problem was corrected. If not, I stay with 4.1.1. But I'm not convinced that Apple will see this as their problem, it's always easier to point elsewhere.
    Regards,

  • Another volume control problem after installing new software

    I'm having a different volume control problem than the previous poster.
    When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

    Friend should do an update again your team blackberry.
    Remember to make a backup with Desktop Manager and the BlackBerry protect
    Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
    Software For BlackBerry® Torch™ 9800 smartphone
    BlackBerry Handheld Software v6.0.0.3170 (Multilanguage) 
    Package Version: 6.0.0.3170
    Consisting of:
    Applications: 6.0.0.756
    Software Platform: 6.6.0.252
    File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
    File size: 171.22MB
    https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
    Regards.
    Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
    Accept as Solution to ** Comments **
    @gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • I just updated to new software and now I need a password to access VM, how can I fix this?

    I just updated to new software and now am pinged for a password to access voice messages?  I have never had to do that! How do I fix this?

    Not a problem with the name change, I posted the link in your other post, here it is again:
    http://www.apple.com/feedback/iphone.html
    Try the reset first, or Restore your iPhone from backup.
    Also, the keynote of the World Wide Developers Conference (WWDC) will be 10:00AM PDT on Monday, June 6, 2011. Supposedly it will include a whole new system of push notifications.

  • How do i download the new software onto my computer so then i can install the new itunes? i dont have the mac app thing either and it wont let me do it from the itunes because my server is not working. how do i fix it?

    Hey so i have a version of a mac i think it is kinda old, it is the all white one i got it like 4 years ago maybe. I got a new ipod recently and i cannot downloade any music onto it. this is because i tried to download the new itunes which it said i needed and now when i try to install it. It says i need a new software so i try to download that and is says i need the mac app or something. but it says i need the new software to get that. so i went onto itunes and clicked the apple and pressed new software and it goes onto this little thing that says my internet is alright but my server has not been connecting. My computer is connected to my school and they updated the server thing and now it wont connect, so i can't win. how do i fix this and download everything i neew?

    First things first: Pull down the Apple Menu and select "about this Mac" and tell us what version of OS X is currently on your computer.

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • I've got a problems with my Iphone 4, I've recently upgraded to the new software (5.1), since then the iTunes doesn't recognize my iphone, as the error comes up:' iTunes could not connect to this iPhone because an unknown error (ex8000022)

    I've recently upgraded to the new software (5.1), since then the iTunes doesn't recognize my iphone, as the error comes up:' iTunes could not connect to this iPhone because an unknown error (ex8000022).
    Are you guys facing the same problem?
    Let me know your opinions, solutions and even problems.
    Thank You !

    http://support.apple.com/kb/HT4137
    How to restore as new.
    and this for itunes message
    http://support.apple.com/kb/HT1808

  • I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • HT1688 I tried to update my iPhone 5 this morning with the new software update and now it won't turn on. When I plug into my itunes account, it says my phone is in recovery mode. Was working perfectly prior to the attempt to update. How do I fix this?

    I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?

    Zach Doody wrote:
    itunes says i cannot update the phone as it is in recovery mode.
    That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
    Restore it. You don't have a choice at this point.

  • Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Maybe you are looking for

  • How to Get Input From User and Display Result

    Hi , I need to get 2 inputs from user and to display it's Mutilple Value. The Below Code is working fine to get 2 Input's from user,but it display a Junk value as a Result .How to overcome this Problem. I need to display it's Mutilple(a*b) value of "

  • Sequence settings to avoid re-rendering

    After importing AVCHD files from my Panasonic SD1 and placing them in the timeline, a full time-consuming render is required. Plus, every cut or change I make requires re-rendering. This implies that the clip and sequence settings are incompatible. I

  • HT201321 Does anyone have information on MacKeeper?

    Both my MacBook Pro and IMac seem to be running really slow...starting up the computer changing applications...pulling things up.  It's just slow.  Is there anything I can do?  This MacKeeper keeps popping up and it says I have a lot of stuff on comp

  • ABAP Webdynpro passing parameter

    I am trying to pass a parameter to an ABAP webdynpro. i have a parameter defined in the application "PLANNING_SEQUENCE" if i run the webdynpro via a direct url and pass the parameter ?PLANNING_SEQUENCE=<sequence> it seems to receive the parameter ok.

  • Backup full with DataPump without sys o system password

    Hi I am into the OS connected as oracle user which is the owner of the Oracle Software. I can connect to the database so : sqlplus / as sysdba without problems. Now I want backup full with DataPump and export utility without sys o system password. Ho