E 72 crash and stuck on white blank screen

i just saved mms settings and rebooted my E 72 and then it would not start. it gets stuck on a white blank screen. what to do?

Try doing the following as well:
1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
 - Make sure you back up your data first as you will lose all of it when you perform. The default code for ALL operations listed here is 12345.
2.*#7370# - Reformat your phone. ALL data may be lost. still it is a good idea to always do a back up of your stuff.
This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.

Similar Messages

  • Please help! Blackberry Torch 8610 stuck in white blank screen!

    sorry for my bad english..
    i'm indonesian ^^
    before this problem happends, about 3 days ago i've got an error message saying built in media got an error so must repair it or wipe it.. i tried to repair it, but it keeps saying built in media repair failed. so i wipe it..
    but, a couple of seconds after i click wipe built in media, my blackberry reboots by itself..
    after it finished rebooting, my blackberry tells me built in media got an error again.
    and i tried to wipe it again but my blackberry still rebooting it self again.
    this happends  4 times in a row.
    and then, when the fourth reboot finished, i tried to wipe it again..
    and yes, the blackberry still rebooting itself again.
    but, this time, my blackberry didn't finish rebooting, the loading bar stuck in 3/4 of the bar.
    its stuck like that for 3 half days.
    i tried to fix it with app updater, but its still stuck in 3/4 of the bar.
    so today i tried to fix it with JL_cmder
    i tried to restore it to factory default.. but it keeps failed connecting to the device..
    the third time i tried, it got a white blank screen when reaching the 3/4 loading bar..
    please help..
    i would really appreciate your help.

    Download BBSAK onto your computer. Connect your phone to the computer and close out BlackBerry Desktop Software as soon as it opens. Then start BBSAK and do the wipe from there. You should get a screen saying there is no OS. At this point you should be able to install the OS either from BBSAK or from the BlackBerry Desktop Software. Try it and report back.

  • My ipod was opening an app, and stuck - now have blank screen, i cannot even turn the ipod off - it is not responding?! now what???

    I was opening up an app, and the ipod changed to a black screen, with a line of white on the bottom. It is backlit. It is also 'stuck' like this. It will not respond to pressing any buttons - it won't even turn off!!! What really *****, is that it's only 2mths old!! (8GB touch)
    HHEEELLLPPPP!!!!!!!!!

    Thankyou ckuan - but the laptop that this particular iPod is attached to - is currently in the fix it shop after being stood on!!
    After much frustration, the battery finally died - I left it to recharge for 20hrs, and it now works fine - thanks for your quick responses!

  • I accidently downloaded a virus on my iphone which means i cannot open my safari because it just crashes and goes to a blank screen. please help

    i accidently downloaded something as i opened a site. it now means i cannot use safari because everytime i try to open it, it just goes to a blank black page and wont let me do anything. what can i do? please help! my iphone is either a 3G or 3GS?

    You cannot get a virus on an iPhone unless it is jailbroken. The site you displayed may be corrupt, however. Press the HOME button if not on the HOME screen, then press it again. Hold your finger on the Safari app that appears in the recently used ribbon, then tap the "-" to close it. Next go to Settings/Safari and tap Clear History, then Clear Cookies and Data.

  • Itunes cannot open and displays a white,blank screen

    this is what happen when i open itunes... please help! i have tried reinstalling the app many times and even deleted my whole itunes library! please help because i need to add songs into my phone

    YEs I have the same & it's driving me insane with frustration

  • In iphone 4 ios6.1 apps are not updated the white blank screen is coming

    Hi team,,
    I am using iphne 4 ios6.1, but i am not able to apps.. when i got to the aApps option and click the white blank screen is coming
    Plz suggest
    Regards,
    luv Sharma

    I do not think that is possible in SSRS, if you are lucky someone from  the MS  will jump in and provide a solution if exists one.
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Help I just get stuck with the blank screen and the white circle

    help I just get stuck with the blank screen and the white circle after i erase all content and setting
    i dont know how to do pls help.

    Try connecting the device to your iTunes library and restoring it.  If necessary place the iPod into recovery mode using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

    Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

    Hi Claire, sounds dire, but some things to try...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • N73 gets stuck on a white blank screen. what to do...

    my N73 Media gets stuck on a white blank screen. what to do?
    it starts and then goes immediately to white bright screen. It is stuck and nothing at all, not even being able to shut it down. I have to remove the battery to shut it down.
    Please Help

    try to remove memory card.
    if removing memory card doesnt work, you have to format the phone;
    Hard reset. Switch the phone off. Press and hold three keys together, the green key, the * key and the number '3'. While you are holding these keys, switch the phone on. Don't release these three keys before you see the NOKIA logo.
    Warning! Hard reset wipes the C (phone memory) drive.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • HT1212 My daughter's iPod touch is stuck on a blank screen with the loading circle just going around and around. I tried to restore it, but it says I have to enter the passcode. I have the passcode, but as I said, there's nothing on the screen. How do I f

    My daughter's iPod Touch is stuck on a blank screen with that loading circle thing just going around and around. She said she was trying to duplicate an app or something, and all the the apps started shaking like when you delete them. I turned the iPod off, but it never turned back on completely. I tried to restore it, but it's saying that I have to enter the passcode. But, as I said, there's nothing on the sceen excect the circle thing. Please help!!!!!

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Syncronizing my 3gs with itunes the sync does not finish because itunes allways crash and stuck i made some troubleshoots like reinstall again but nothing and my itunes is update and the system is windows vista home premium.Please help me...

    Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not  acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
    My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
    Please help me.

    I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
    You asked what I meant about saving the installer on your PC.
    When you go to the iTunes download page:
    http://www.apple.com/itunes/download/
    And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
    After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
    It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
    I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
    The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
    The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

  • I open my iBooks and it has a white blank screen. I cannot get to my books.

    I open my iBooks and it has a white blank screen. I cannot get to my books.

    My device is iPad mini

  • My i pod touch crashed and is displaying a blank yellow screen and won't turn off what can i do?

    My I pod crashed and now displays a blank yellow screen i can't switch it off what can I do.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Pavilion DV4-1070ee got stuck on a blank screen and numlock and caps lock LED are blinking..

    My pavilion dv4-1070 got stuck on a blank screen and numlock and caps lock LED are blinking... it happens when i update the BIOS.. please help... thanks

    Hello, 
    I see that you're having an issue with the notebook giving you a black screen. I also noticed you said only the NumLock and Caps lock is blinking. 
    Now, the BIOS update could have because this but we won't know until you let me know how many times the LED blinks. 
    Here is a chart which will tell us what's causing the issue. 
    Please let me know the outcome. 
    THX

  • IPOD Help~(cannot view anything except a white blank screen)

    Alright...I never expected to post up something in this discussion thread this soon...since I got my 30gig iPOD just three days ago...and curious as I am to things...I think I broke it, hah~
    Anyways...I need some help.
    Here's the story.
    I was updating my iPOD to a newer version, I'm assuming...and during the updating process...I accidently 'x'ed out of the box...and now my iPOD screen does not show anything except for a white blank screen. If I hold down the menu and center button for six seconds...It shuts down...but when I release/let go of the buttons...it makes a ring sound and goes back to the white blank screen.
    And also...when I go to the start menu and look under the iPOD folder...it has an update your ipod thing...I clicked it...and it pops up with a screen, saying stuff like it's 'initializing'...and tells me to plug in my iPOD with the usb chord...but I get a message saying 'can't mount iPOD' or 'internal error'
    I think I've tried anything there is to solve this problem...like the five R's...etc.
    I do not want to think that I broke my iPOD already. So if anyone knows, please reply back.
    Thanks in Advance

    Hi Sky,
    Hmm - I see the shapes, I'm not sure why they're disappearing when you draw them - too simple of a file to point at some other issue. It seems like something with the installation went wrong or is missing (the player that renders the Stage for AS3 documents). I think the first thing will be to get the update. Can you try downloading from this page instead of through the update manager? http://www.adobe.com/support/flash/downloads.html Then try running the executable that you download.  If this doesn't fix it, Flash may need to be fully removed and reinstalled.
    Jen.

Maybe you are looking for

  • Unattended Install - Lightroom 5.7.1 (Creative Cloud)

    Hi all, I might have missed something here but after creating a Creative Cloud package, I install the MSI that was created inside the "Build" folder followed by running the ExceptionDeployer in the Exceptions folder. However, the issues are: Public d

  • Genius Bar Guy Re-established Software to Solve Battery Problem 4S ???

    iPhone 4S is  2-years-old and running iOS 7.1  was suddenly losing battery charge after a few hours in Standby mode. I took it to the Apple Store and a guy from the Genius Bar took the phone into the back for 15 minutes and gave it back to me. He sai

  • G5 Dual 1.8 GHz fans gradually go to full speed and stay there

    My G5 Dual 1.8 GHz boots normally and quietly, with no freezes or panics. However, within a minute or so, I hear the fans begin to gradually gain speed. This continues for a couple of minutes until the fans reach maximum speed, making my room sound l

  • Passing T into a method

    I did these methods twice, and I'd like to change the signature to something like: private void removeAllArticles(<T>) Is that possible, and, what's the terminology? public class DatabaseOps {     private EntityManagerFactory factory = Persistence.cr

  • Identity plate printing issue - not ALWAYS printing

    I use Lightroom heavily for printing onsite at events.  Specifically, I have a template set up for printing 16 shots per 8.5x11  so that I can cut them up into 4 vertical strips (ie.  Photobooth strips).  I have an identity plate set up so that each