E-ACT_TOO_MANY_ACTIVATIONS how to activering reset
E-ACT_TOO_MANY_ACTIVATIONS how to activering reset
to my account is [email protected]
"E_ACT_TOO_MANY_ACTIVATIONS or Adobe Activation Request Error 2004," contact us to have the activation count reset. Can someone help please
Similar Messages
-
I just installed Visio 2003 on a PC, and got the "we can't activate this app via the internet because you've installed it too many times" message. I went back to phone activation, but, of course, that's no longer available for this product.
How do I get the number of activations reset? Apparently you used to be able to do this by calling Microsoft, but what's the number to call? Or is there another way to do it?
I'm probably going to need to do it for my copy of Office 2003 also.Hi,
Microsoft has ended support for Office 2003 on April 8, 2014. This change will affect your software updates and security options.
Please contact your local customer service. Explain to the service (Human being) that you can’t activate Visio 2003 and the error message is “we can't
activate this app via the internet because you've installed it too many times”.
You can find
your local custom support number on the link below.http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Hope it can be helpful. -
How do I reset my iCloud user name when my email used before is no longer active? Also my iCloud was never verified with my old email on my iPad is I am stuck.
Hey Dorekelly,
Thanks for the question. It sounds like you wish to change the email address associated with your Apple ID and iCloud account. The following resource should guide you through this process:
Change your Apple ID
http://support.apple.com/kb/HT5621
Afterwards, be sure to read about updating the features and services that you use with Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M. -
How do I reset a used ipad given to me as a gift? I am unable to finish activation because I have no previous owner's information?
Settings, general, erase all content and settings.
if the person has iOS7 on that device and it's activation locked then you'll need the apple ID of the previous owner to fully wipe it. So if you can't wipe it you'll need that previous owner to give you their apple ID or to unlock it for you.
If you can't contact them or if they can't unlock it, try to get your money back because without that info you can't fully erase that ipad, and it's unfortunately possible that the device they sold you wasn't theirs to sell. -
I can't remember my answers to security questions and dont recall password. Also my recovery email is no longer active. How can I reset password?
You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
(85489) -
How do you reset activation lock when original owner is not reachable?w
How do you reset activation lock when original owner is not reachable?
You don't. If you cannot locate the original owner, then the device is useless to you. If you purchased it from someone, try returning it for a refund, otherwise it is an expensive paperweight. Find My iPhone Activation Lock - Apple Support
-
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I'm going to be completely honest here, a while ago I spammed a friend to the point where I froze my own messages app on my mac and now when I try to re-open it the spinning colorful pinwheel just pops up and never stops. Yes I learned a lesson but I'd like to obviously use the app again so I was wondering how I can reset the app. Thanks for everyones support!
HI,
I have never come across a situation like this.
If you try to send a Super IM over the AIM service it normally will take a few minutes (literally) to come back with a response that it has messed up
I have not tried it with a Jabber service.
There are ways of deleting one or some of the .plists involved that can cause a reset of sorts but these are normally used for other things.
I have never had a Message "Stuck" in such a way that the App Hangs so that a .plist might have details of the IM it is sending.
With Messages shut down open the Console app (In Applications/Utilities)
In the System Diagnostic Reports do you have anything for Messages
It may look like this
Date/Time:
2012-08-09 22:56:48 +0100
OS Version:
10.8 (Build 12A269)
Architecture:
x86_64
Report Version: 11
Command:
Messages
Path:
/Applications/Messages.app/Contents/MacOS/Messages
Version:
7.0 (3103)
Build Version: 2
Project Name:
iChat
Source Version: 3158000000000000
Parent:
launchd [139]
PID:
8786
Event:
hang
Duration:
3.14s
Steps:
32 (100ms sampling interval)
Hardware model: iMac12,1
Active cpus:
4
Free pages:
34044 pages (-990)
Pageins:
11 pages
Pageouts:
0 pages
Process:
Messages [8786]
Path:
/Applications/Messages.app/Contents/MacOS/Messages
Architecture:
x86_64
Parent:
launchd [139]
UID:
503
Task size:
63716 pages
CPU Time:
1.925s
This Hang was for only 3 and a bit secs (yours will probably list a longer period).
Now go to the All Messages section of Console and try starting Messages.
Do you get additional info (there may be a reveal triangle to open) ?
Things to try. (one at a time)
Use the Finder > Go Menu > Hold ALT key > Select Library method to open the Home Folder/Library (That is normally invisible)
Open Preferences.
In here find the following .plists
com.apple.ichat.AIM.plist
com.apple.ichat.Jabber.plist
com.apple.imagent.plist
If it was an AIM Message try deleting (Drag to Trash) the AIM one.
If Jabber (GoogleTalk or Facebook or other) they try the Jabber one.
After the deletion restart Messages.
If deleting the service .plist did not work try deleting com.apple.imagent.plist
If it happens to be an iMessages IM then delete both of these
com.apple.imessage.bag.plist
com.apple.imservice.iMessage.plist
You will need to restart Messages again. The second of these is likely to need you to re-enter your Apple ID.
To be clear.
Qith Messages shut down then Delete one .plist (AIM or Jabber)
Restart Messages.
If it does not work shut down (force Quit) Mesages
Remove the imagent .plist
Restart Messages.
If a iMessages conversation then delete both .plists and restart Messages (you may need to re-enter your Apple ID)
7:38 PM Sunday; September 16, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
How do I reset Apple Mail to Factory Settings?
How do I reset Apple Mail to factory settings? I had 7 emails accounts on there and was about to add my school email address. It wasn't going through though, so I went to the school's IT department to ask them to do it. Unfortunately, the IT guy couldn't fix the school email and worse, now ALL my emails accounts won't go online. They all have exclamation points to their right, and are constantly asking for passwords. No matter how many times I put in the right password, it still keeps asking for it. I tried fixing it from Mail Preferences and System Preferences but nothing works. It keeps saying Connection Error. I don't know what the IT guy tweaked but it messed up everything.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. -
How do I reset an icloud email password on my iphone? It is not my apple id password. I cannot see anything in the online support at Apple.
Go to http://appleid.apple.com to manage your iCloud ID and check to see if your @me.com address is associated with your ID. If it isn't you'll have to contact iCloud support to see if it is still active, and if so, how to associate it with your account.
-
How can i reset an ipad if if dont have the apple id
i just wanna find out how can i reset this ipad i just bought it from a guy and it ask for a password and he doesnt knoe it and i am not able to do it
With iOS 7, Find My iPhone includes a new feature called Activation Lock, which makes it difficult for anyone to use or sell stolen iPad.
With Activation Lock, the Apple ID and password of original owner will be required to:
1. Turn off Find My iPhone on your device
2. Erase your device
3. Reactivate and use your device
http://support.apple.com/kb/ht5818 -
I am trying to restore my Mac OS after a hard drive failure and my password is no longer recognized, however I can log in by double clicking on the Lion Icon? How can I reset my password
First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combinationcommand-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions. -
How to factory reset my hp dv4-2169nr after i manually format the hard drive?????
after i format my hard drive, there are some problems. i have recovery partitions still untouched. so, how to factory reset from the recovery partition. helppppp
Boot from a Windows 7 system repair disc, load command prompt and use diskpart to mark the recovery partition as "active", then restart the PC, it should boot into the recovery partition and load recovery manager.
-
I can't remember my iphone password and it's closed me out. How do I reset?
i can't remember my iphone password and it's closed me out. How do I reset?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
How do i reset/restore computer to factory settings???
how do i reset/restore computer to factory settings???
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.
Maybe you are looking for
-
Developer 6.0 web deployment /FRM-99999
Hi all, we are getting following error message, when we try to start forms in a WEB Browser (IE5). FRM-99999: A network error occured the client will not be able to continue Details Java Exception java.net.SocketException:Connection Reset by peer at
-
ISG Debug - IP configuration missing for radius proxy session initiation
Folks, We are trying to configure the ISG as a Radius-Proxy for EAP Authentication. I have configured aaa server radius proxy, clients and aaa auth radius-proxy group as per the guide. I have my interface config as follows: interface TenGigabitEthern
-
I am looking for a solid example of a servlet that starts a task and then responds/forwards before the task completes (the task continues to run in another thread and may run for seconds or minutes). Then the servlet can be called again to check on t
-
I have an E250 with Veritas Volume Manager 3.0.2 installed. Since E250 can have only internal 6 disks and I've mirrored first two disks (encapsulated), that leaves me 4 18G disks to do a RAID 5 for Oracle databases. However, I also want to use Vxvm's
-
BUG? Keynote media browser can't see edited photos.
Can anyone tell me how to fix this? After cropping a photo in Camera Roll within "Photos" I am unable to insert the edited photo in Keynote or Pages via the Media Browser. The built-in MEDIA browser, inserts the unedited photos in Keynote or Pages fo