E-bay macbook white battery: when listed as "new" does that mean "new and "unopened"?
I'm buying on e-bay a "new" macbook white battery. How safe a bet? Especially not knowing if new also means unopened!
contact the seller on ebay directly and ask them. No one here has anyway of knowing.
Similar Messages
-
My macbook air was purchased late 2010. Does that mean it will not support mirroring? Can I purchase anything to enable mirroring?
Your computer is too old to support native mirroring. You can use 3rd party software like Airparrot, though results will vary so try it first.
-
i just recently bought a phone off craigs list from someone else and they didnt restore it so i tried to plug it in and restore it and it said the "apple mobile device is not started" what does that mean? and what can i do?
You must be running Windows. AMD is a service that needs to be running in order to sync your phone. You need to start it as described here: http://support.apple.com/kb/ts1567.
-
My macbook pro will not hold life even though it is plugged in when I use it. I know the battery life is about gone, but didn't realize this effects it when plugged in or does it. It is about 7 years old. This is second battery. Am I right to think this?
You are right - a dead battery can some times play these kinds of tricks.
If this is a removable battery, I suggest you take out the battery and try running it on the power adpater alone. -
There's a cross in the battery-icon..;what does that mean?
well,everything is in the subject...thank you for every little help,i'm new in using a mac,and i'm aware that maybe this question seems completely stupid to some of you!:)
thxthank you for your answers.
well,it definitivly didn't help to put the mb to sleep and reawake,nor to shut it off,and restart.
I read about the PMU test,but i don't have the problems that my mb isn't responsive anymore!...
but I turned the mac off, disconnected the AC Adapter and removed the computer's battery.
Pressed and hold down the power button for 5 seconds(and more..) and then released the button.
I reconnected the battery and AC Adapter,pressed the Power button to restart the computer,it worked,but the cross is still there!!
...i m so scared because i fear that it shuts down one time without warning(ike yesterday because the battery was low i think,but WITHOUT WARNING...)
and that the power adapter doesnt work any more..
But now it seems to recharge the battery nontheless,the button is red,orange..
Ive got to say that i had a problem with this mac from the beginning,actually it always shut down witout warning after a few minutes,i gave it back,they had to install a new piece i think(and which came from japan,so i had to wait 3weeks!-)
I often have to do the PRAM reset before the mb turns on..
so,as long as it works,as long as it is only the icon which is strange,i m happy!
..so..i don't know ifi really need to do the pmu rese,as they say it should only be done if nothing else works!
thnak you for reading me. -
Dear Apple Support Communities,
What's wrong with my macbook white battery? it is like opened on the other side, like lack of glue.
MVBR
ViviAbout Batteries in Modern Apple Laptops
Battery University
Apple - Batteries - Notebooks
Apple - Batteries
Extending the Life of Your Laptop Battery
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count -
when Macbook pro- sudeenly stops working on wireless and says there is no hardware installed- what does that mean. I tried to click turn wirless on and it says no hardware installed.
ThanksReset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
when i go to the app store to update the one app that needs to be updated, the screen is blank. It used to list all the apps that need updating and have a button called update all. Now nothing. Just a blank screen. How can I fix this?
There's been a problem with this all day. Seems to be a server problem - wait a day and try again, or use itunes on the computer to update, that works.
-
What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When an iPad is connected to the MacBook and the option in iTunes says it will make a full back of the iPad to the computer does that mean ALL the files associated with ALL apps on the iPad? If so where is the backup located on the computer?
Yes. http://support.apple.com/kb/ht4946
-
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567 -
Hello
I just signed up to start downloading music on my ipod and when I got to the end it said can't process now. Does that mean that the system is down or will I need to do this all over again?> Thank youIf your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore. -
i plug the cable into my ipod touch then plug it to the tv, it works for a few seconds but then my ipod tell me that its not supported, what does that mean and what can i do about it?> and is tv out supported with the ipod touch? help please
runs ios 5.0
white ipod touchi am using a cable connector like this one.. it works with audio when pluged into a stereo but not a TV.i am trying to display video from ipod, also from other apps.. i also want to know why it does not work.
i use the video app on the iPod and video stored on other aps. -
If in my Hardware section of System Information, when I select Thunderbolt and the reply is:
Thunderbolt: No hardware was found,
does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached and that the computer does have thunderbolt?
I have Lion and both my Mini Server and Macbook Pro are less than a year old, however both were bought from Apple as reconditioned units so they might be older, and I expected they would have Thunderbolt but when I connect a Black Magic Intensity Extreme unit which is a thunderbolt powered and driven Device using a Thunderbolt Cable to either computer, it is not recognized.No other information in Sys Info and I guess as both units, Mini and MBPro, were reconditioned, they were pre July and February , 2011, respectively.
I don't suppose there is any way to add Thunderbolt or USB 3.0 to prior generation Mac Products or get similar performance. -
When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.
I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.
Maybe you are looking for
-
Exit CL_GUI_FRONTEND_SERVICES= FILE_OPEN_DIALOG once I get the file name
Hi I have where I have a selection screen that finds the file, you can say where to get the file. After that I need to close that window. How do I close it??? Below is an example of my program. After I choose the file and execute the program, I have
-
Hi, I have a JTable where one column is rendered by JCombobox and other column by JCheckbox. want to have this kind of functionality: I clicks several rows while ctrl is pressed (basic functionality) but when I click already selected row it becomes d
-
Hi, I've made a couple of videos using imovie. Format is 4:3. They play well in imovie (or VLC) but when I've burned a dvd using iDVD - using 4:3 format again - a big portion of the video has gone outside the visible area. How can i address this? tha
-
All text seems to have gone missing. Look at the login screen. I use xfce4, this started a few days ago. Xorg.0.log, journalctl etc looks fine. Whats going on here?
-
A new version of the unique toolkit is now available for download. As announced earlier, LabHSM makes it possible to easily create and then maintain complex event-driven applications in LabVIEW as a collection of HSM-driven active object VIs using a