E Business Suite File corrupted
Hi
I am new to E Business Suite. I am still at the learning stage.
I am downloading the E Business Suite software R12 from E Delivery Site. The version I will use is linux X86 EBS.
I am using a Windows machine to download all the files. The download speed is only 60 KB per Second.
I observe that when checked using the command "unzip -t filename.zip" for the zip files downloaded till now, It shows some of the files (but not all ) are having errors.
The errors are like *" Bad CRC and Bad Zipfile Offset"*. The errors are only of these two kinds.
Does this mean that the downloaded files are not usable for Installation and installation will fail ? Do I need to download the same files again ? Or is it possible to use
these files without any problems in Installation.
Hi,
The errors are like *" Bad CRC and Bad Zipfile Offset"*. The errors are only of these two kinds.This indicates that the files are corrupted.
Does this mean that the downloaded files are not usable for Installation and installation will fail ? Yes.
Do I need to download the same files again ? Yes.
Or is it possible to use these files without any problems in Installation.It is not possible.
Once you create the stage area directory, please run md5sum as per (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media) to verify the integrity of the stage are directory.
Thanks,
Hussein
Similar Messages
-
Is there a cure for persistent file corruptions across the suite?
i am having terrible and consistent problems with file corruptions across the suite. for example…
1: i collected for output (indesign) – corrupted over 100 small images that were linked.
2: opened an indesign job and all linked files failed to update and could not be imported (simply would not import those files and were all corrupted).
3: had a hang in photoshop followed by a 150:30 error (would not open any of my applications). this prompted a clean install of system and adobe cs4 see below
4: most recently, had a hang in photoshop (photoshop will also no "force quit") whilst indesign was open. two of my image files corrupted and, most surprisingly, all my illustrator files that i had placed also corrupted (will not even open in illustrator any more). illustrator was not even running at the time, so, get this – a hang in photoshop destroys illustrator files simply because they are placed in indesign.
this last event has made me more certain than ever that there is a fundamental problem at the cs4 core.
can anyone help?
please note the following:
i am running a macintosh imac, 2.66 GHz Intel Core 2 Duo (latest imac), with 4 GB 1067 MHz DDR3 ram.
before this last disaster, i had reloaded the system software (archive and install), and updated it all the way to version 10.5.8
i then uninstalled the creative suite, ran the cleanscript from adobe, reloaded the creative suite, downloaded all the cs4 updates
(so, latest mac, latest system, latest cs4 – all clean installs).
is there something i can do? or is this just a very unstable and disappointing upgrade – i have had nothing but problems from day one!
many thanks if anyone has any advice.Re: 150:30 error:
Please try this KB article's solutions, and report back on how it went for you. If you can provide details about any recent OS updates, backups, or migrations, that would help is nail down the root cause of the new rash of this error for Mac users recently:
http://kb2.adobe.com/cps/512/cpsid_51260.html -
Unhandled exception while opening excel file from e-business suite form
Hello,
I am getting error ORA-106561 (Unhandled errorg) when I am trying to open excel sheet which is reside in my desk top from Oracle E-business suite customized form using dde.app_begin('C:\Program Files\Microsoft Office\Office12\EXCEL.EXE'||'d:\emp.xls' ,dde.app_mode_normal)
E-BUSINESS SUITE is in Unix server and EBS version is 10.5.10.2cu and hp Unix version is 11.11
Please help me out in the above issue
My objective is to open an excel sheet which is in my local disk and read and update the excel.
Edited by: user538673 on Jul 23, 2010 2:20 AMHello,
This is the standalone Forms forum here.
Please, ask your EBS questions on the E-Business Suite forum ;-)
Francois -
E-Business Suite Database Tier cloning failure
Hi All,
We are cloning a new Oracle E-Business Suite test instance from the cold backup of our production. Production is single instance/archive log enabled. However, the target instance is single instance/no archive log. the DB version is 11.1.0.7
When i am running adcfgclone.pl on the database tier, it errors out with the following.
APPS Password : Log file located at /db1/oratrng/db/tech_st/11.1.0/appsutil/log/TRNG_oradapp/ApplyDBTier_11081226.log
| 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Mon Nov 8 12:35:16 2010
ERROR: Failed to execute /db1/oratrng/db/tech_st/11.1.0/appsutil/clone/bin/adclone.pl
The logfile shows the following errors:
ORACLE instance started.
Total System Global Area 1069252608 bytes
Fixed Size 2109352 bytes
Variable Size 427823192 bytes
Database Buffers 624951296 bytes
Redo Buffers 14368768 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/db1/oratrng/db/apps_st/data/system01.dbf'
alter tablespace TEMP1 add tempfile '/db1/oratrng/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/db1/oratrng/db/apps_st/data/temp02.dbf' REUSE
I tried by creating the controlfile manually too but it gave error when i tried to open the database:
SQL> @crctl.sql
ORACLE instance started.
Total System Global Area 1069252608 bytes
Fixed Size 2109352 bytes
Variable Size 427823192 bytes
Database Buffers 624951296 bytes
Redo Buffers 14368768 bytes
Control file created.
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/db1/oratrng/db/apps_st/data/system01.dbf'
I tried to recover the above datafile.
SQL> recover database using backup controlfile until cancel;
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [],
I tried another cold backup(we take cold backups every night) but facing the same issue with another backup also. That's why i think its not an issue with system.dbf file being corrupt.
when i searched metalink for ORA-600 with kcvhvdf_1, i found that it is a bug in 11.1.0.7. bug 9314439.
the bug says:
The problem is that when the datafiles have zero DB ID=0=0x0, the 'create controlfile set database' command is not setting the new DB ID in the datafile headers but only in the controlfile. It then causes the ORA-600 [kcvhvdf_1] to be produced in the recovery due to DB ID mismatch between datafiles (select FHDBI from x$kcvfh) and controlfile (select DBID from v$database).
I verified the above statement and found it true.
SQL> select FHDBI from x$kcvfh;
FHDBI
0
0
0
0
0
0
0
0
0
0
0
select DBID from v$database;
DBID
551459957
The bug states a work around:
If using a cold backup (after a clean shutdown - NORMAL/IMMEDIATE), one workaround is to open the database right after the create controlfile (with no previous recover):
CREATE CONTROLFILE SET DATABASE "DEV2" RESETLOGS ARCHIVELOG ...
alter database open resetlogs;
However, this workaround is not working for me.
Kindly help. Its urgent.>
We are cloning a new Oracle E-Business Suite test instance from the cold backup of our production...
>
>
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/db1/oratrng/db/apps_st/data/system01.dbf'
>
This to me indicates that the backup was not a cold backup.
HTH
Srini -
Oracle E-Business Suite 11.5.10 Error
I have installed many versions of E-Business Suite many times before with no errors. I am currently in an extreme rush to get an 11.5.10 environment up and I am receiving this error.
There was an error while running the command - c:\oracle\visdb\9.2.0\temp\VIS_vm-demo-ora11-1\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.
I have no idea why this is happening. I am using the same stage that I used last week successfully. Any help is greatly appreciated.
This is being installed on a VM machine running Windows Server 2003 Enterprise Edition R2 with 2 gigs of ram.Hi,
There was an error while running the command - c:\oracle\visdb\9.2.0\temp\VIS_vm-demo-ora11-1\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.Check the log file for details about the error.
Most probably your stage area is corrupted, so please run md5sum to verify.
Note: 390554.1 - 11.5.10.2 Failing With Unzip Problem And Invalid Ad_top
Note: 316843.1 - MD5 Checksums for 11i10.2 Rapid Install Media
Regards,
Hussein -
Tar: Unexpected EOF in archive for Oracle-E-Business-Suite-12.2.3-VISION-INSTALL
Hi All,
System = Ubuntu 14.04 LTS (64 bit)
I downloaded Oracle EBS Vision instance from Oracle eDelivery.
File Name = Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00
File Type = Archive
There are 14 others files like the same and they have been successfully extracted. This is the first file out of the 15 total files.
I am unable to extract the above file.
Steps Performed
1. Initially, I tried to extract directly. I got the error
Could not open "Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00"
Archive Type not supported
2. Then I renamed the file to "Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00.tar" and tried to do the following
$ tar xvf Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00.tar
Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ovf
Oracle-E-Business-Suite-12.2.3-VISION-INSTALL-disk1.vmdk
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
Now the above two downloaded files Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ovf and Oracle-E-Business-Suite-12.2.3-VISION-INSTALL-disk1.vmdk are of unknown file type.
Ideally I should have got a file = Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00 (File Type = Program) like all other 14 files and as per the installation steps that I see in the videos for the installation.
Can anyone help me on this?
Thanks,
NiladriSystem = Ubuntu 14.04 LTS (64 bit)
This is not a certified OS, please see (Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Linux x86-64 (Doc ID 1330701.1)) for the list of supported Linux OS.
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
This indicates that the files are corrupted and you will need to re-download the files again.
Thanks,
Hussein -
API for creating new User in Oracle E-Business Suite through BPEL
Hello,
I would like to use a BPEL process to create a new User in Oracle E-Business Suite. In the Integration Repository I was able to find an API called FND_USER_PKG/LOAD_ROW that creates/updates Application's User data. Is this the API I should be using? If so, I would like to better understand how to use this API.
I have created a simple BPEL process and added an Oracle Application Service, which uses this FND_USER_PKG/LOAD_ROW API. I set the following parameter before Invoking the Oracle Application Service: X_USER_NAME, X_ENCRYPTED_USER_PASSWORD and X_START_DATE. When I run the BPEL process I get the following error. I suspect that I am not passing all the required input parameters. Does anyone have any sample data I can use to get this API to load correctly? If I am using the wrong API, please let me know.
Please note, I have also posted this question to the SOA Suite and BPEL discussion forums...
Thank you kindly!
Christine
- <input>
- <Invoke_OracleEBS_SecurityUser_InputVariable>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
- <InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/">
<db:X_USER_NAME>
CRILEY
</db:X_USER_NAME>
<db:X_ENCRYPTED_USER_PASSWORD>
CRILEY
</db:X_ENCRYPTED_USER_PASSWORD>
<db:X_START_DATE>
2009-01-01
</db:X_START_DATE>
</InputParameters>
</part>
</Invoke_OracleEBS_SecurityUser_InputVariable>
</input>
- <fault>
- <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="code">
<code>
20001
</code>
</part>
- <part name="summary">
<summary>
file:/E:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_SecurityUser.wsdl OracleEBS_SecurityUser_ptt::OracleEBS_SecurityUser(InputParameters) - WSIF JCA Execute of operation 'OracleEBS_SecurityUser' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.FND_USER_PKG.LOAD_ROW API. Cause: java.sql.SQLException: ORA-20001: APP-FND-02600: Unable to create user CRILEY due to the following reason(s):
Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
An unexpected error occurred. Please contact your System Administrator...
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.FND_USER_PKG", line 783
ORA-06512: at "APPS.FND_USER_PKG", line 916
ORA-06512: at "APPS.FND_USER_PKG", line 1035
ORA-06512: at "APPS.FND_USER_PKG", line 645
ORA-06512: at line 1Hello and thank you for your response. I am new to using APIs so please excuse my inexperience... I am not sure how to run the API outside of BPEL... Is that something you could easily walk me through?
I have made the following changes in BPEL based on your recommendation: 1) Added Oracle Application Service and used the API, LDAP_WRAPPER_CREATE_USER, found in the Oracle Application Module Browser* under: Applications Technology (ATG_PF)> User Management (UMX)> User (FND_USER)> PLSQL> User (FND_USER_PKG)> LDAP_WRAPPER_CREATE_USER
2) Set the following parameter prior to Invoking the Oracle App Service: X_USER_NAME, X_UNENCRYPTED_PASSWORD,X_START_DATE, X_END_DATE, X_DESCRIPTION, X_EMAIL_ADDRESS, X_FAX, X_EXPIRE_PWD.
3) Deploy and run BPEL through BPEL Control.
I get the following {color:#ff0000}error on the Invoke{color}. {color:#339966}Do you see any issues with the values I am passing in the input{color}? Any idea why I am getting this error? Is there anything that I need to have configured for the API to work correctly, other than adding an Oracle Application Service in the BPEL?
Thank you for your time,
Christine
bq. Faulted while invoking operation "OracleEBS_LDAP_Create_User" on provider "OracleEBS_LDAP_Create_User". \\ - <messages> \\ - <input> \\ - <Invoke_OracleEBS_LDAP_Create_User_InputVariable> \\ - <part xmlns:xsi="[http://www.w3.org/2001/XMLSchema-instance]" name="InputParameters"> \\ - <{color:#339966}InputParameters{color} xmlns:db="[http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LDAP_WRAPPER_CREATE_USER/]" xmlns="[http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LDAP_WRAPPER_CREATE_USER/]"> \\ <db:X_USER_NAME> \\ CRILEY \\ </db:X_USER_NAME> \\ <db:X_UNENCRYPTED_PASSWORD> \\ CRILEY \\ </db:X_UNENCRYPTED_PASSWORD> \\ <db:X_START_DATE> \\ 2009-01-01 \\ </db:X_START_DATE> \\ <db:X_END_DATE> \\ 2010-01-01 \\ </db:X_END_DATE> \\ <db:X_DESCRIPTION> \\ CRILEY \\ </db:X_DESCRIPTION> \\ <db:X_EMAIL_ADDRESS> \\[[email protected]|mailto:[email protected]] \\ </db:X_EMAIL_ADDRESS> \\ <db:X_FAX> \\ 999-888-7777 \\ </db:X_FAX> \\ <db:X_EXPIRE_PWD> \\ 0 \\ </db:X_EXPIRE_PWD> \\ </InputParameters> \\ </part> \\ </Invoke_OracleEBS_LDAP_Create_User_InputVariable> \\ </input> \\ - <fault> \\ - <bindingFault xmlns="[http://schemas.oracle.com/bpel/extension]"> \\ - <part name="code"> \\ <code> \\ 20001 \\ </code> \\ </part> \\ - <part name="summary"> \\ <summary> \\ file:/D:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_LDAP_Create_User.wsdl [OracleEBS_LDAP_Create_User_ptt::OracleEBS_LDAP_Create_User(InputParameters) |http://forums.oracle.com/forums/]- WSIF JCA Execute of operation 'OracleEBS_LDAP_Create_User' failed due to: Error while trying to prepare and execute an API. \\ An error occurred while preparing and executing the APPS.FND_USER_PKG.LDAP_WRAPPER_CREATE_USER API. Cause: java.sql.SQLException: ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason: \\ ORA-20001: {color:#ff0000}Unabled to call fnd_ldap_wrapper.create_user due to the following reason: \\ An unexpected error occurred. Please contact your System Administrator.. \\ {color}ORA-06512: at "APPS.APP_EXCEPTION", line 72 \\ ORA-06512: at "APPS.FND_USER_PKG", line 3877 \\ ORA-06512: at line 1 \\\\ ;
Edited by: Christine Riley on Jan 28, 2009 1:22 PM
Edited by: Christine Riley on Jan 28, 2009 1:26 PM -
Unable to open E-business suite login page after database upgrade
I have successfully upgraded the 11i E-business suite database 10.2.0.3 to 11.1.0.7. After upgradation i have all services running on apps tier and database, but i cannot open the login page.
The below are the errors from error log file
[Wed Nov 25 11:21:38 2009] [notice] FastCGI: process manager initialized (pid 22989)
[Wed Nov 25 11:21:39 2009] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Wed Nov 25 11:36:41 2009] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that yo
ur configuration file is not correct.
[Wed Nov 25 11:36:41 2009] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that y
our configuration file is not correct.
[Wed Nov 25 11:36:41 2009] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that yo
ur configuration file is not correct.
[Wed Nov 25 11:49:41 2009] [warn] pid file /u02/prodora/iAS/Apache/Apache/logs/httpd.pid overwritten -- Unc
lean shutdown of previous Apache run?
[Wed Nov 25 11:49:41 2009] [notice] FastCGI: process manager initialized (pid 17194)
[Wed Nov 25 11:49:42 2009] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
[Wed Nov 25 11:52:49 2009] [error] [client 10.65.4.69] File does not exist: /u02prodcomn/portal/DBAS_ed
bs12/
[Wed Nov 25 11:54:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:54:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:55:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 11:57:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
Edited by: user12196525 on 25-Nov-2009 06:28Hi,
Autoconfig was successfull, All the services are up and running on apps and db tier.
from error.log
[Wed Nov 25 15:46:21 2009] [error] [client 10.65.4.69] File does not exist: /u02/prodcomn/portal/DBAS_ed
bs12/
[Wed Nov 25 15:46:25 2009] [error] [client 10.65.4.69] File does not exist: /u02/prodcomn/portal/DBAS_ed
bs12/
[Wed Nov 25 15:47:01 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:47:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:47:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:49:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:49:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:49:06 2009] [error] [client 10.65.4.69] File does not exist: /u02/prodcomn/html/US/ICXINDEX_
DBAS_edbs12.html
[Wed Nov 25 15:50:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:50:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:52:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:52:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:52:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:54:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:54:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:55:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:57:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:57:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:57:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 15:59:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 15:59:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:04 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:05 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:06 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:00:07 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/Spy
[Wed Nov 25 16:02:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 16:02:02 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
[Wed Nov 25 16:02:03 2009] [error] [client 192.168.2.79] client denied by server configuration: /servlet/AggreSpy
Regards -
OEM 12c E-Business Suite Plugin Issue
Hello All,
I am currently new to OEM 12c, and I have the latest version installed and running, Version 12.1.0.2.0. So far everything has been running great, and agents have been downloaded and deployed with little to no issues. However, I am now trying to deploy the E-Business Suite Plug-in to the Management Server first, and I receive an error:
Stop management server
Failed
November 1, 2012 2:28:25 PM CDT November 1, 2012 2:28:40 PM CDT DeployPluginOnPrimaryOMS emctl.log
When I look further, I see this in the logs:
Starting Prereq check..
Performing Pre config module
Performing Check required patch
Checking mandatory patches for plugin : oracle.apps.ebs:12.1.0.1.0:0
Performing Pre metadata registration
Performing Pre SQL registration
Registering plugin SQLs. Reg file is /u01/software/Middleware/oms/sysman/admin/emdrep/plugininfo/pluginDepList
Completed Prereq check
Starting Deployment
Invoking pre deploy callbacks.
OMS state could be found. It is up
Stopping OMS.
EM-04001: Server side Plug-in deployment failed with message Error while stopping Management Server on host <company.com>: Unable to stop OMS.. Contact Oracle Support*
EM-04026: Server side Plug-in deployment failed due to previous errors. Check log file /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugindeployment_33/configplugin_all_2012-11-01_14-28-12.log on host <company.com> for more details_*
Performing Opss deconfig
Performing Midtier deconfig
Removing synonyms from EMRUNTIME schema
Removing Plugin's DB objects.
Stopping OMS
Starting OMS
OMS Started successfullyDiagnostic log file: /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugin_deployment_33/configplugin_all_2012-11-01_14-28-12.log
For help type emctl plugin deploy -help
I can't seem to find any helpful info on the errors concerning EM-04001 and EM-04026. I did see that there was a bug fix which was required, bug number 13242773. But reading the ReadMe says this is only for OEM version 12.1.0.1.0.
So, my question is, has anyone run into this problem, or have any suggestions on how to get this plug-in deployed successfully?
Thanks in advance for your help.
Edited by: 969006 on Dec 13, 2012 12:25 PMHello,
I haven’t run into the same errors you have reported but, let me share with you our recommended way of installing E-Business Suite Plug-in. Start by referencing our “Getting Start” MOS note 1434392.1it contains all the required patches, certification details, and related documentation. Once you are ready to perform the install start out by reviewing Chapter 2 - Installing the Oracle Application Management Pack for Oracle E-Business Suite of our Oracle Application Management Pack for Oracle E-Business Suite Guide Release 12.1.0.1.0. Here is a direct link -http://docs.oracle.com/cd/E24628_01/doc.121/e28715.pdf
If after following the above steps you are still encountering errors then open a Service Request with Oracle Support.
Regards,
Product Management -
Logon to E-Business Suite Home E-Business Home Page
Hi,
I am able to open raouf.oracle.com:8000 as well 127.0.0.1:8000.
When i click Logon to E-Business Suite Home E-Business Home Page
Following error is coming up
Unable to connect
Firefox can't establish a connection to the server at raouf.oracle.com.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
And if try the same from IE, its not opening any page.
2. And when clicked Logon to Oracle Applications Manager Oracle Applications Manager
got following error
Not Found
The requested URL /servlets/weboam/oam/oamLogin was not found on this server.
Regards
Raouf
Edited by: user9927062 on Apr 6, 2010 11:41 PMHi,
What is the application release?
What is the client OS? IE and Firefox version?
Do you have proper entry in the hosts file?
Can you ping the application hostname.domainname as well as the IP Addess from that client machine?
Regards,
Hussein -
Installation of E-Business Suite x86 on Redhat Linux 4 64 bits
Dear Sir/Madam,
I am installing E-Business suite on a 64 bits platform however the environment file has not been created. The following error is appearing. Could you please be of a help.
W-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3
command: su applprd -c "/data/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env APPS/APPS"
While checking the environment file on the folder there are other env files not been created.
Database ORACLE_HOME environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/db/tech_st/10.2.0/VIS_oracle3.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.3/VIS_oracle3.env
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env
RW-50016: Error: - APPL_TOP environment file was not created:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/VIS_oracle3.env
ADOVARS environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adconfig.txt
Regards
StéphaneHi,
How did you resolve this error:
W-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3
command: su applprd -c "/data/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env APPS/APPS"
While checking the environment file on the folder there are other env files not been created.
Database ORACLE_HOME environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/db/tech_st/10.2.0/VIS_oracle3.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.3/VIS_oracle3.env
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env
RW-50016: Error: - APPL_TOP environment file was not created:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/VIS_oracle3.env
ADOVARS environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adconfig.txt
Thanks,
Naveen
[email protected] -
Login issue to E-business suite from desktop
Hi All,
I have installed oracle ebs 11.5.10.2 on a linux x86 machine and started the application. I tested the application by entering the url http://apps.test.com:8005
and I am able to login using my user id and password.
While the above is working good, I went to my laptop and tried the same url, but the browser doesn't open the login page. How can I fix this issue?
my desktop domain is cfl.rr.com. Does this cause any issue?
Thanks and Regards,
Badri.Hi Badri;
I have installed oracle ebs 11.5.10.2 on a linux x86 machine and started the application. I tested the application by entering the url http://apps.test.com:8005
and I am able to login using my user id and password.
While the above is working good, I went to my laptop and tried the same url, but the browser doesn't open the login page. How can I fix this issue?
my desktop domain is cfl.rr.com. Does this cause any issue?You try to login from windows client right? If answer yes what is your windows OS?(xp-vista etc) I assume you are using Xp then, you have to follow those steps:
1. Add your http://apps.test.com:8005 to your trusted site
2. Go to C:\WINDOWS\system32\drivers\etc and edit your hosts file , add your site information there like:
10.x.x.x apps.test.com
3. Be sure you use certifed browser, please check:
Recommended Browsers for Oracle E-Business Suite 11i Doc ID: 285218.1
4. If possible close windows firewall
And retest issue
Hope it helps
Regard
Helios -
Help with 11i E-Business Suite Install on Windows XP
I've tried unsuccessfully to install the E-Business Suite on Windows XP machine. I repeatedly get the following message during the install (I start from a clean restored environment each time) " RW-20001 Error: Unzip failed: Insufficient disk space: Please create enough space for the intstall". I get this message even though I have only used 100GB of a total of 500GB. I'm installing from DVDs provided by Oracle.
I also get an error message related to the "Listener". The detail of this message is included below.
Any suggestions to get past this would be appreciated.
Question on the Domain Name Configuration:
When i follow the instructions from a previous thread and do
C:\ipconfig I get the following:
Connection-specific DNS Suffix: PMSC.COM
IP Address : 192.168.0.103
I added PMSC.COM per the instructions in the thread.
The original entry in the host file was:
127.0.0.01 localhost
It is now:
127.0.0.01 localhost
127.0.0.01 localhost.PMSC.COM
I'm trying to set this up as a standalone installation with everything on the harddrive of this computer. I'm confused as to what the correct host entry should be and if this is the cause of my intallation failures. I can provide as much information as possible to help diagnose my probelms. Thanks.
The only error messages I can find in the log files show a problem with the Listener. The error message is as follows:
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 05-JAN-2007 17:30:43
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPMSCDEV))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=pmsc_main.pmsc.com)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 05-JAN-2007 17:30:44
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is C:\oracle\pmscdevdb\9.2.0\network\admin\PMSCDEV_pmsc_main\listener.ora
Log messages written to c:\oracle\pmscdevdb\9.2.0/network/admin\pmscdev.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPMSCDEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PMSC_Main.PMSC.COM)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPMSCDEV))
STATUS of the LISTENER
Alias PMSCDEV
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 05-JAN-2007 17:30:44
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File C:\oracle\pmscdevdb\9.2.0\network\admin\PMSCDEV_pmsc_main\listener.ora
Listener Log File c:\oracle\pmscdevdb\9.2.0/network/admin\pmscdev.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPMSCDEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PMSC_Main.PMSC.COM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PMSCDEV" has 1 instance(s).
Instance "PMSCDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
Please refer to the remaining logs on middle tier at - c:\oracle\pmscdevappl\admin\PMSCDEV_pmsc_main\log\01050527.log
Any suggestions to get past this would be appreciated.1. Make sure the user installing the apps has admin priviledges
2. Create a staging area from the DVD if you can - since you have so much space on your system, then attempt the installation from the staging area. The perl script to use is already on the DVD - adautostg.pl
3. > Connection-specific DNS Suffix: PMSC.COM
IP Address : 192.168.0.103
and you added
127.0.0.01 localhost.PMSC.COM, I feel it should have been
192.168.0.103 localhost.PMSC.COM ( if localhost is your server name. Adding this will nto affect anything)
although I can see from your log file, that the server name is pmsc_main, if so you have to add the servername.domainname.com to the host file too, such as
192.168.0.103 pmsc_main.pmsc.com.
Essentially, when you ipconfig, it has to return pmsc_main.pmsc.com against the IP address of your server - i.e. 192.168.0.103 and / or 127.0.0.01
Basically, see the following threads:
a. How to Install 11.5.10 on Win XP
b. Oracle EBS 11.5.10.2 Installation Steps
c. http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=0
Note: To clean your system of previous installations, see the following if you have metalink -
Note 107961.1 How To Clean Out A Previous Oracle Applications Installation On Windows NT,
however, if you dont have access to metalink, do the labour of deleting every reference to the failed installations on your system and the registry (CAREFUL! if you are up to it) -
EXCEPTION RAISED WHILE OPENING EXCEL SHEET FROM E-BUSINESS SUITE FORM
Hi,
I got error message ORA-10656I when was trying to open excel sheet which is in my local drive from e-business suite form. the following is the code where it is raising error.
Appid := dde.app_begin('C:\Program Files\Microsoft Office\Office12\EXCEL.EXE '||'D:\emp.xls' ,dde.app_mode_normal);
Oracle EBS version : 11.5.10.2cu
Server : HP
OS : HP Unix 11.11
Could anyone help me out
ThanksTwo different forum users, exactly the same question? Hardly possible. So I guess this is just a double post.
-
Error "REP-0788: Warning" on registering custom report to e-Business Suite
Hi
I done the register of custom report to Oracle e-Business Suite 11i got the below error
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Spawned Process 4579
REP-3000: Internal error starting Oracle Toolkit.
REP-0788: Warning: The value of restricted LOV parameter P_1 is not among the selectable values.
Report Builder: Release 6.0.8.24.0 - Production on Tue Apr 14 10:25:34 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 715975.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
please anyone help on this.
regards,
svaHi,
What is the type of the report? Is it bitmap? If yes, please make sure that the DISPLAY is set properly. Also, change the report type to text and see if you can submit the request successfully.
Here are some additional troubleshooting documents to look at:
Note: 200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200474.1
Note: 364838.1 - Quick Checks for REP-3000: Internal Error Starting Oracle Toolkit.
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364838.1
Regards,
Hussein
Maybe you are looking for
-
HT1229 How can you transfer the photo library from an iphone to a mac.
I have a photo library on my iphone which was synced to the iphone from my pc. Now I have a mac laptop and I cannot figure out how to get the photo library onto my mac from the phone. The photo stream has transferred over but none of my other album
-
Saving Animated .GIF Incorrectly?
Please help! I am trying to save an animated .gif with images that will rotate through every 1 second. Here is what I am doing...what am I doing wrong???!!!! Step 1: I create two frames Step 2: I add one image to each frame Step 3: I change the frame
-
How do i access my mac email account from another computer?
How do I access my mac email account from another computer?
-
Error Add Item using DI API 2007 B
Sirs, I gettin a error on add a item using a follow code: If m_Item.GetByKey('100') = True Then m_Item.ItemType = ItemTypeEnum.itItems m_Item.ItemsGroupCode = 1
-
I'm having this problem on an HP PC running Windows XP SP2. Never had a problem until I upgraded to 7.6.029. I open itunes. Sometimes the program is frozen upon opening, sometimes I can scroll and select a tune. 8 seconds into the tune I can no longe