E-business suite11i ASM database upgrade

Hi all,
In our environment we have E-business suite 11i (11.5.10.2) with ASM instance 10.2.03 on solaris 10. I need to upgrade just database ASM instance 10.2.0.3 to ASM instance 11gR1, Plz anyone provide me a right document.
Regards & Thanks

Hi,
Please refer to:
Note: 736127.1 - How To Upgrade ASM from 10.2 to 11.1 (RAC)?
Note: 455398.1 - Using Oracle Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 11i and Oracle Database 11g
Regards,
Hussein

Similar Messages

E-Business suite 11i database upgrade

Hi,
Iam in middle of 11i E-Business database upgradation (10.2.0.3 to 11.1.0.7) on solaris, Iam following the steps as per document [ID 452783.1]. In point no 13, I got stuck with in applying patch 7486407 on 11.1.0 oracle home, After applying opatch the post-install steps of this patch in readme are
Startup the Oracle Services.
> sqlplus '/ as sysdba'
> spool post_install.log
> @?/rdbms/admin/prvtaw.plb
> @?/rdbms/admin/prvtawex.plb
> spool off
My question is i have no instance yet to 11g Oracle home, as i have installed 11.1.0.6 base release and installed 11.1.0.7 patch set release in 11.1.0.6 oracle home. All I have ready for now is old database 10.2.0.3(needed to be upgraded) and just 11g oracle home (just software).
From the above patch post install steps how could i run above scripts without any instance connected to 11g?
Please help me out as very urgent!
thanks in advance

Hi,
I cannot start the database in 11g oracle home inorder to run the scripts for this particuar patch as no database is created, its just the software i have installed yet.
I got stuck with step no 13 as per the document http://ID 452783.1.
In step 13, Applying the following 11.1.0.7 patches in 11g oracle home. I have applied all the patches except patch 7486407. In this patch readme it says after applying with opatch i need to run the scripts by starting the database of 11g (how could it be possible to run the scripts without a database which i have not created a database yet as per the document i have followed all the steps from 1 to 12 and all i have done is installation of 11.1.0.6 base release(JUST SOFTWARE) and installed patchset 11.1.0.7 on top of 11.1.0.6 oracle home. please help me out from this point.
Regards
Edited by: rakhi on Nov 22, 2009 7:20 AM
Edited by: rakhi on Nov 22, 2009 7:33 AM

Business Objects Planning Database Upgrade

I have attempting to upgrade Business Objects Planning from version 11.2 to 11.6. The upgrade appears to run successfully, however, when I attempt to start the Planning Application Services, the service fails to start up, stating the current DB version is less than the working version. I have spoken to our consultant, who stated he knew nothing of any changes that must be made to the database. The first portion of the error log is copied below. I have tried an incremental step of upgrading from 11.2 to 11.5 and have received the same error. What must I do to configure the database either before or after the upgrade?
Application is set up as single server.
OS is windows server 2003
Database is Oracle 10.2.0.4.
Database user is SRCAdmin, and is an owner of the db.
FATAL|04/08/2009 13:52|General|Server startup...
INFO|04/08/2009 13:52|Sql|Current DB Version 11.2 is less than the working version 11.6. Requesting upgrade lock
ERROR|04/08/2009 13:52|Sql|ORA-06550: line 1, column 77:
PLS-00201: identifier 'DBMS_LOCK' must be declared
ORA-06550: line 1, column 77:
PL/SQL: Statement ignored
ORA-06550: line 1, column 147:
PLS-00201: identifier 'DBMS_LOCK' must be declared
ORA-06550: line 1, column 137:
PL/SQL: Statement ignored

hi Santhosh,
you may be able to use the query builder tool to do this.
BusinessObjects Query builder - Basics
if you need further info on using this particular tool let me know & i'll move your question to the bi platform space.
you can also look into 3rd party tools such as rpt inspector which may be able to do this.
-jamie

Oracle Database upgrade to 11G (Host_Command Issues)

Sorry I'm posting this again. Original post in Database - Upgrade. I'm not getting a lot of clicks in that category
We recently upgraded to Oracle 11g (Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production). Our PL/SQL release: (PL/SQL Release 11.2.0.2.0 - Production). We use a lot of host commands inside our PL/SQL stored procedures. One of these included fetching data from an external server and pushing the data into Oracle Tables.
Most of this process is running fine, except the execution never completes. There is no issue data wise. It's just that the Host_command doesn't receive the completion status and seems to be running even though there's nothing going on in the background.
The Oracle e-business suite's concurrent program based on this stored proc also never completes, though it doesn't do anything in the background. For testing purpose, our DBA used 2 insert statements one before and one after the host_command. The insert before the host_command worked but not the one after. Please help! This is happening after we upgraded to 11g 3 weeks ago!
Thanks, Naveen Gagadam.

Pl do not post duplicates - Upgrade to 11g, Host Command Inside Stored Proc doesn't end.
I have moved your duplicate post to the EBS forums
Srini

11.5.10.2 12.1.1 and 10g 11g database upgrade at same time

I have just started an 11.5.10.2 > 12.1.1 upgrade and have created a project in MWIZ 2.15 for it.
I would also like to upgrade the 10.2.0.2 database to 11.1.0.7 as part of the same upgrade and create an MWIZ project for that.
I have a couple of questions that the MWIZ FAQ does not address:
1. At what point in the 11.5.10.2 > 12.1.1 upgrade should I do the database upgrade?
MWIZ has two points when it can be done based on apps/database versions. One is at the end of the 'Prep for Upgrade' category and the other is during the 'Upg to Rel 12.1.1' category. The MWIZ step notes cover upgrading to the latest 10g or 11g patch version but not upgrading from 10g to 11g so I am unsure which category to go for.
2. When I create the database upgrade project which 'Destination Version' should I choose?
The two options are 'RDBMS 11.1 and E-Business Suite 11.5' and 'RDBMS 11.1 and E-Business Suite 12'.
As I haven't upgraded to R12 yet and am still at the pre-upgrade stage should I pick 11.5? Or should I go with R12 because I am upgrading Apps and the database at the same time?
Any help and advice gratefully received.
Thanks

Answer to above question not required now as:
Having read the 24th December update of note 761570.1 - 'Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade' I have decided to upgrade the database to 11.2.0.x by following the Path C option.
Unfortunately as the 11.2.0.x upgrade isn't covered by MWIZ yet I will have to follow the manual steps.

Oracle 11g R1(11.1) Database Upgrade Guide.

Where can I find the SAP documentation for:
Database Upgrade guide > Upgrade to Oracle Database 11g Release 1(11.1):UNIX.
I am able to find Upgrade to Oracle Database 11g Release 2(11.2). We are planning to upgrade to 11g Release 1(11.1) and I am not able to find any SAP documentation for 11g Release 1(11.1):
Does SAP support 11g Release 1(11.1)?
We are using Business Object XIR3 and want to upgrade from Oracle 9i to Oracle 11g R1.
Thanks
Edited by: Sherry Barkodar on Jan 7, 2011 1:52 AM

We are using Oracle 9i for our Business Object repository for CMS / Audit repository purpose and we want to upgrade to Oracle 11g. What is the impact of this upgrade (from Oracle 9i to Oracle 11g) on Business Object repository?
Can you please provide some information for upgrade to Oracle 11g R2 and impact on business Object Repository?
Bellow is information about our platform:
-          The BOE XI 3.1 installation is on Sun Solaris.
-          Upgrading from Oracle 9i to Oracle 11g to be used for CMS / Audit repository purpose.
-          We want to use Oracle 11g for CMS repository and reporting purposes.
Thanks,
Sherry

PASTA Printers Stop printing after OS upgrade and Database Upgrade

Problem Description: We recently upgraded our Development and DR environments from 10G Database to 11G version. In order to perform the Database upgrade we have also upgraded the Operating System from version 5.9 to 5.10 Solaris Sparc.
Soon After the upgrade PASTA printers which we are trying to configure are not printing at all. Even the printers which were printing fine earlier are not working now.
System Details are:
Database Version: 11.2.0.2.0.
E-Biz Version: 11.5.10.2.
OS: Sun Sparc 5.10.
applmgr:GFSDEV_gfsdev> FNDPSTAX -v
Pasta version 3.0.4.0(patch 3) - unicode/bidi printing utility.
Copyright (c) Oracle Corporation 1999-2003.
applmgr:GFSDEV_gfsdev>

Problem Description: We recently upgraded our Development and DR environments from 10G Database to 11G version. In order to perform the Database upgrade we have also upgraded the Operating System from version 5.9 to 5.10 Solaris Sparc.Have you relinked all the application executable files as per the docs referenced in this thread? -- Need clarification on Solaris 10 upgrade for E Business suite application
Soon After the upgrade PASTA printers which we are trying to configure are not printing at all. Even the printers which were printing fine earlier are not working now.Can you print to the same printers from the OS using the lp command?
How to investigate printing issues and work towards its resolution ? [ID 297522.1]
Thanks,
Hussein

Oracle Database Upgradation 10g to 11g in HP unix

Oracle Database Upgradation 10g to 11g (standalone DB & ASM is implemented) in HP unix ?
Kindly furnish the good links and screen shot documents.
Edited by: user11937849 on Apr 9, 2012 4:04 AM

As part of the upgrade, you might research how new Oracle 11g features can help your system run better.
Your upgraded system can effectively start using extended statistics, a very powerful new 11g feature, immediately after the upgrade. I have a detailed blog post on how to do this with OEM - http://iiotzov.wordpress.com/2011/11/01/get-the-max-of-oracle-11gr2-right-from-the-start-create-relevant-extended-statistics-as-a-part-of-the-upgrade
Iordan Iotzov
http://iiotzov.wordpress.com/

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

Database Upgradation from oracle 9.2.0.8 to oracle11gR2

Hi
we are using AIX 5.3 TL 10 SP4 and we are upgrading DB from oracle9.2.0.8 to oracle 11.2.0.2
i am having some doubt from below pre-upgrade scripts out put.
oratst@ebsdevdb on /tmp # sqlplus "/as sysdba"
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Jul 4 10:11:48 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> spool 11202_upgrade.txt
SQL> @utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 07-04-2011 10:17:06
Script Version: 11.2.0.2.0 Build: 001
Database:
--> name: EBSTEST
--> version: 9.2.0.8.0
--> compatible: 9.2.0
--> blocksize: 8192
--> timezone file: V1
Logfiles: [make adjustments in the current environment]
--> The existing log files are adequate. No changes are required.
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
--> TOOLS tablespace is adequate for the upgrade.
.... minimum required size: 8 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
--> AR_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 33497 MB
--> FND_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 45447 MB
--> AMVD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> ASOD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> CCTD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> IBUD tablespace is adequate for the upgrade.
.... minimum required size: 1 MB
--> IEMD tablespace is adequate for the upgrade.
.... minimum required size: 5 MB
--> IEOD tablespace is adequate for the upgrade.
.... minimum required size: 4 MB
--> JTFD tablespace is adequate for the upgrade.
.... minimum required size: 135 MB
--> OKCD tablespace is adequate for the upgrade.
.... minimum required size: 34 MB
--> XDPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> XNPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> APPS_UNDOTS1 tablespace is adequate for the upgrade.
.... minimum required size: 849 MB
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
WARNING: --> "shared_pool_size" needs to be increased to at least 532 MB
WARNING: --> "java_pool_size" needs to be increased to at least 128 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> optimizer_max_permutations 10.1 OBSOLETE
--> row_locking 10.1 OBSOLETE
--> undo_suppress_errors 10.1 OBSOLETE
--> max_enabled_roles 10.1 DEPRECATED
--> enqueue_resources 10.2 OBSOLETE
--> sql_trace 10.2 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Real Application Clusters [upgrade] INVALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [install]
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Passwords exist in some database links.
.... Passwords will be encrypted during the upgrade.
.... Downgrade of database links with passwords is not supported.
WARNING: --> Deprecated CONNECT role granted to some user/roles.
.... CONNECT role after upgrade has only CREATE SESSION privilege.
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 9.2.0.8.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER ADWANIAH has 1 INVALID objects.
.... USER APPS has 34 INVALID objects.
.... USER CHAKKACHANSA has 1 INVALID objects.
.... USER FA_USER has 9 INVALID objects.
.... USER SYSSEL has 2 INVALID objects.
.... USER SYSTEM has 30 INVALID objects.
.... USER XXITDFINAD has 7 INVALID objects.
WARNING: --> SYSTEM schema default tablespace has been altered.
.... The SYSTEM schema default tablespace is currently set to TOOLS.
.... Prior to upgrading your database please reset the
.... SYSTEM schema default tablespace to SYSTEM using the command:
.... ALTER USER SYSTEM DEFAULT TABLESPACE SYSTEM;
WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following commands
while connected as SYSDBA:
EXECUTE dbms_stats.gather_schema_stats('CTXSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('DBSNMP',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('MDSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDPLUGINS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDSYS',options=>'GATHER'
estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('OUTLN',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYSTEM',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SYSAUX Tablespace:
[Create tablespace in the Oracle Database 11.2 environment]
--> New "SYSAUX" tablespace
.... minimum required size for database upgrade: 500 MB
From above output script
1)SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
From system tablespace minimum required size means free space from system tablespace or total size of system tablespace?
i am going to use dbua utility for upgrade means does it alter tablespace as per output of scripts or we need to manually alter tablespace size as per requirement?
2)WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
what is above warning and how can i configure ACL's for APPS User?
Thanks
With Regards
A-Z

Hi
oratst@ebsdevdb on /ebdbh/11g/data/cfgtoollogs/dbua/ebstest/upgrade1 # more Upgrade_Directive.log
Connected.
ODMA_DIRECTIVE:VERSION:9.2.0.8
ODMA_DIRECTIVE:MIGRATE_SID:
ODMA_DIRECTIVE:ORA:IGNORE:06512:
ODMA_DIRECTIVE:ORA:FATAL:00600:
ODMA_DIRECTIVE:ORA:FATAL:01012:
ODMA_DIRECTIVE:ORA:FATAL:01031:
ODMA_DIRECTIVE:ORA:FATAL:01034:
ODMA_DIRECTIVE:ORA:FATAL:01078:
ODMA_DIRECTIVE:ORA:FATAL:01092:
ODMA_DIRECTIVE:ORA:FATAL:01109:
ODMA_DIRECTIVE:ORA:FATAL:01119:
ODMA_DIRECTIVE:ORA:FATAL:01507:
ODMA_DIRECTIVE:ORA:FATAL:01722:
ODMA_DIRECTIVE:ORA:FATAL:03113:
ODMA_DIRECTIVE:ORA:FATAL:03114:
ODMA_DIRECTIVE:ORA:FATAL:07445:
ODMA_DIRECTIVE:ORA:FATAL:12560:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01650:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01651:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01652:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01653:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01654:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01655:
ODMA_DIRECTIVE:ORA:RECOVER_ROLL:01562:
ODMA_DIRECTIVE:ORA:RECOVER_INIT:04031:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catupgrd.sql:
ODMA_DIRECTIVE:BOUNCE_DATABASE:UPGRADE:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catuppst.sql:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:sqlplus/admin/help/hlpbld.sql helpus.sql:
Thanks
With Regards
A-Z

Help needed in 10gR2 to 11gR2 EBS Database Upgrade

Hi,
I am upgrading EBS Database from 10gR2 (10.2.0.3) to 11gR2 11.2.0.3. While going through Oracle Note Complete Checklist for Manual Upgrades to 11gR2 [ID 837570.1], under the point 3 of "Recommendations from Source database" it says:
"Disable the custom triggers that would fire before/after DDL and enable them after the upgrade is complete."
I want to know is it compulsory to disable the custom triggers? If yes then how can I get the list of those custom triggers and disable/enable them before and after the database upgrade?
Please let me know the commands. My operating system is Oracle Enterprise Linux 5.8.
Thanks,
Abdul

Hi Srini,
Thanks for the docs.
EBS version is R12 (12.0.6) and 10gR2 (10.2.0.3).
Currently I am only upgrading EBS Database from 10gR2 (10.2.0.3) to 11gR2 (11.2.0.3) and want to use it with my current R12 version.
Currently I am following these Oracle notes:
- Complete Checklist for Manual Upgrades to 11gR2 [ID 837570.1]
- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 [ID 1058763.1]
I hope I am on the right track?
Regards,
Abdul

Testing while doing the database upgrade from 9.2.0.6 to 11.2.0.2 apps ?

Dear Experts,
Please note that we are in process of doing database upgrade from 9.2.0.6 to 11.2.0.2 ?
We have gone through the interoperablity note id for 11i 11gr2 ?
Step 1
upgrading the database from 9.2.0.6 to 9.2.0.8 ?
Step 2-
Upgrading the Forms patchset to 19 ?
Step-3
Applying the Rollup-6 patch ?
Step -4
Upgrading the database from 9.2.0.8 to 11.2.0.2 ?
We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?
Please advise.
Regards
Mohammed.

We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?There is no such a list. However, you can refer to the documents referenced in each task above and it should cover if any testing need to be done or not (for example, the Developer Patchset doc). For the rest of the docs you will have to do your regular testing (test the application/database and make sure it is working properly).
Also, make sure you review (Known issues on Top of 11i.ATG_PF.H. delta.6 (RUP6) - 5903765 [ID 459353.1]).
ATG RUP 7 is the latest 11i.ATG_PF patch.
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631 [ID 858801.1]
Thanks,
Hussein

SCCM 2012 R2 SQL Database Upgrade Fails : Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.

Hi Friends,
We have planned to upgrade our SCCM 2012 SP1 infrastructure to SCCM 2012 R2 so we have setup test environment to test SQL database upgrade before doing same in production.
But while testing SQL database upgrade on test machine, it is getting failed with below error.
ConfigMgrSetupWizard.log
ConfigMgrSetupWizard Verbose: 1 : Scripted setup failure handling callback called. Failure: 29.
ConfigMgrSetupWizard Verbose: 1 : Received error [Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.] from native code.
ConfigMgrSetup.log
ERROR: SQL Server error: [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of PRIMARY KEY constraint 'ContentDistribution_PK'. Cannot insert duplicate key in object 'dbo.ContentDistribution'. The duplicate key value is (921). :
tr_ContentDistributionNotification_insert
ERROR: Failed to execute SQL Server command: ~-- ~-- Rebuild ContentDistribution tables ~-- ~IF (EXISTS(SELECT TOP 1 1 FROM dbo.SMSData WHERE SMSBuildNumber <= 7900) AND dbo.fnIsSecondary() != 1) ~BEGIN ~ exec spRebuildContentDistribution
@TruncateTables=0 ~END
Failed to create process of SetupWpf.exe.
Can anyone please help to get this resolved.
Thanks.

We found out that there were duplicate entries in the PkgStatus_G and the PkgServers_G tables in the SCCM DB. We identified them, deleted them , and then we were able to run the /TESTDBUPGRADE command and it went through fine. We performed
all of this on a COPY of the PROD DB and then moved the changes in PROD. Hope this helps someone.
- Dave

How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
common system crashes in SAP Business One

Hi,
Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
Thanks & Regards,
Nagarajan

How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?

Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

E-business suite11i ASM database upgrade

Similar Messages

Maybe you are looking for