E-CATT documentation and I-Tutors for Test Workbench in SOLMAN

Hi!
I looking for suitable documentation for e-CATT (e.g. how to build and integrate automatic e-CATT scenarios).
I need this functionality in connection with SAP Solution Manager's Test Workbench.
Any helpful information will be appreciated.
Thank you!
regards
Thom

Hi,
Please follow my and sapna blogs which will help you to integrate ECATT scripts with solman.
creating ecatt scripts -series by sapna
eCATT Articles On SAP SDN - Series Of 8 Weblogs
Migrating catt to ecatt
/people/community.user/blog/2007/02/05/create-and-migrate-catt-to-ecatt-part-1
Perform Testing with Solution manager
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
Go through above blogs which will show how to integrate any script with solman and generate test plans to manage testing.
Please reward points for thes same.

Similar Messages

How to simulate a DAQ device and use it for testing applications without hardware???

how do i simulate a DAQ device
in MAX and use it for testing applications without hardware???
If my application requires inputs
from external hardware to proceed how can I simulate a DAQ device in LabVEIW?
i need to simulate several Digital inputs and Outputs to test the software. currently i dont have the hardware and DAQ device here.
please reply with your valuable suggestions.
many thanks in advance
RENN
Kudos always welcome for helpful posts
Solved!
Go to Solution.

Hi,
There is no option to simulate traditional device.You need hardware for that so i would suggest to simulate a PXI device which has similar configuration to PCI-6014 and to do a small modification to your application..

Email setup for Test Workbench

Hi
I am looking to setup Email notifications for Test Workbench.
Such as, automatically emailing testers when Test packages are assigned
Emailing Developers when a Test Problem Report is created.
How do i do this? Does anyone have any documentation they can share?
Really need some help.
Many thanks

Yes Ramesh,
By setting up ChaRM the following actions can be triggered automatically,
1) When a requestor creates support message based on an error, service desk employee will be notified automatically
2) A developer will be notified when a change manager in the service desk assigns a developement task assigns.
3) When the developer completes the task, change manager will be notified again.
4) Then, a tester will be notified when change manager assigns a tester.
and many other things also there in the sequence.
Regards,
Satish.

I have purchased and downloaded Tutor for Lion but I am unable to play the videos

I have been unable to run the App. Tutor for Lion after purchasing form App store. I have the .iap file om y computer under I Tunes, but when I click on purchases my purchase has not been registered.In addition I am unable to verify my Apple ID and Email as I receive a message telling me the name has been used on another computer. I use only one compuetr and the system is up to date with the 7.3 upgrade.
At one time I tried Cloud but decided against using it and deleted the programme from my System preferences, Could there be data left behind after the deletion
Any assitance to help me clear up my mess would be gratefully appreciated
BJM

Are you trying to run it on your Mac? Any app downloaded from iTunes will only run on an iOS device such as an iPad or iPhone. If you need to run an app on your Mac, you need to go to the App Store in your Applications folder and purchase the app from there.
If you did purchase the wrong app, go to the our website and let me know (I am the developer of Tutor for Lion). http://www.noteboomproductions.com/contact-us/feedback/
Dan

Avinaptic,a powerful video file (and DRF) analyzer for testing

AVInaptic is a program with a simple GUI that analyzes file type AVI, ASF / WMV, MP4/MOV, Matroska (MKV), OGG, GMOs and FLV, and shows a lot of information on the technical characteristics (useful in predicting whether the movie will be read by their player stand-alone). It also allows you to make simple changes on the fly, set delays (or advance) on all audio tracks and edit the FourCC allows you to remove any trace in the files (video, audio, subtitles, attachments);. Italian author site but you can choose english in the program. Site translated here.
http://fsinapsi.altervista.org/ (italian)
http://forum.doom9.org/showthread.php?s … c&t=123076
# Contributor:Xemertix <arch88(at)katamail(dot)com>
pkgname=avinaptic
pkgver=20071118
pkgrel=1
pkgdesc="a powerful video files analyzer"
arch=('i686' 'x86_64')
license=('GPL')
depends=('sqlite3' 'gmp' 'gtk' 'libjpeg' 'libpng' 'file')
[ "$CARCH" = "x86_64" ] && depends=('lib32-sqlite3' 'lib32-gmp' 'lib32-gtk' 'lib32-libjpeg' 'lib32-libpng' 'lib32-file')
url="http://fsinapsi.altervista.org/"
source=(http://fsinapsi.altervista.org/code/${pkgname}/${pkgname}-fixed.tar.gz
avinaptic.desktop)
md5sums=('d5f3ba28fe0e005ebb38bd8725f89932'
'64e5d6855e5957e7cd266198abcd5324')
build() {
cd $srcdir
# Program
install -D -m 755 ${pkgname}/avinaptic $pkgdir/usr/bin/avinaptic
# Freedesktop compatibility
install -D -m 664 ${pkgname}/icone/avinaptic.png ${pkgdir}/usr/share/icons/avinaptic.png
install -D -m 664 avinaptic.desktop ${pkgdir}/usr/share/applications/avinaptic.desktop
# Documentation
install -d -m 775 ${pkgdir}/usr/share/doc/avinaptic/
install -D -m 664 ${pkgname}/testi/* ${pkgdir}/usr/share/doc/avinaptic/
Screenshot
Note:Avinaptic is a 32-bit program.For 64bit installations i've included lib32-file in the archive.The program is available in both english and italian.
Current Issues:
Only the analysis of .mkv files is not working properly on my 64 bit installation..avinaptic shows garbaged hex output data.Maybe an incompatibility with something..other video files are analyzed correctly.
http://www.datafilehost.com/download-3a701c57.html
Last edited by Xemertix (2009-05-22 19:44:15)

s3kt0r wrote:Question: Since I don't actually use any icons (ratpoison user), I can just comment out the line which calls for avinaptic.desktop, right?
Yes.
edit: Installed ok, no problems with matroska, no problems with output, im on 32b though.
thanks
The output with mkv files looks like that for me:
[ About file ]
Name: trailer2.mkv
Date: 16/05/2009 12:39:32
Size: 6,337,145 bytes (6.044 MB)
[ Generic infos ]
File type: data
[ Hex dump ]
00000000: 1a 45 df a3 01 00 00 00 00 00 00 23 42 86 81 01 |.Eß£.......#B...|
00000010: 42 f7 81 01 42 f2 81 04 42 f3 81 08 42 82 88 6d |B÷..Bò..Bó..B..m|
00000020: 61 74 72 6f 73 6b 61 42 87 81 02 42 85 81 02 18 |atroskaB...B....|
00000030: 53 80 67 01 00 00 00 00 60 b2 3e 11 4d 9b 74 40 |S.g.....`²>.M.t@|
00000040: 3d 4d bb 8b 53 ab 84 15 49 a9 66 53 ac 81 df 4d |=M».S«..I©fS¬.ßM|
00000050: bb 8c 53 ab 84 16 54 ae 6b 53 ac 82 01 37 4d bb |».S«..T®kS¬..7M»|
00000060: 8d 53 ab 84 1c 53 bb 6b 53 ac 83 60 af 41 4d bb |.S«..S»kS¬.`¯AM»|
00000070: 8d 53 ab 84 11 4d 9b 74 53 ac 83 60 b0 f3 ec 01 |.S«..M.tS¬.`°óì.|
00000080: 00 00 00 00 00 00 93 00 00 00 00 00 00 00 00 00 |................|
00000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
This report was created by AVInaptic (18-11-2007) on 21 mag 2009, h 09:41:13
I need some arch64 tester

Documentation and Final Version for CS3 SDK?

Hello,
I'm new to developing plug-ins for photoshop. I'd like to know when the final version of Photoshop CS3 SDK including a documentation will be released. Thanks for your time and help!
Michael

Finally. The CS3 SDK is now available on http://www.adobe.com/devnet/photoshop You might have to make a new request for the CS3 SDK. Remember you DO NOT need to purchase anything. Just be a registered user and make the request. Sorry for the hoops but.... "Pawan" <[email protected]> wrote in message news:[email protected].. > Is there going to be a full release of the Photoshop CS3 SDK anytime soon. > The partners area of the website lets you download only the Beta SDK which > has only one sample and some headers missing from the CS2 SDK. The > documentation links are also broken. Does anyone have any info on this. > > thanks in advance, > Pawan

Where I can find documentation and updated drivers for Labview 3.1.1?

I'm running LabView 3.1.1 on a PowerMac 7600 and I have run into some difficulties geting it to work properly. The documentation has been lost and I cannot find it online anywhere. Any help with this and updated drivers would be greatly appreciated.

I have LV manuals going back to version 1. I still have a couple of systems operating in version 3 so I will not give up my manuals, but I may be able to help in some way. They are a set of eight books totalling about 6 inches thick. Is there something specific I may be able to help with?
A recent posting on this forum was from a museum of old computers and early LV systems. They were looking for stuff older than yours. I don't know if they could help or not.
Lynn

Function modules (and the like) for testing Object Dependencies in PLM

Hi all,
I've created an upload program for characteristic values to AUSP, but I need to check the object dependencies (as shown in transaction CU03) before saving the data.
I have the list of the dependencies for the characteristic in question, but how can I perform a dependency check in program code? Is there any function modules (and the like) which I can use?
All helpful answers will be rewarded!
- Mari Virik

Thanks!
I'm not that familiar with BAPIs, which transactions can I use to check it out? Transaction BAPI? And how do I locate it in the BAPI Explorer? How do I perform the method call?
More points will be rewarded
- Mari

Function modules (and the like) for testing Object Dependencies

Hi all,
I've created an upload program for characteristic values to AUSP, but I need to check the object dependencies (as shown in transaction CU03) before saving the data.
I have the list of the dependencies for the characteristic in question, but how can I perform a dependency check in program code? Is there any function modules (and the like) which I can use?
All helpful answers will be rewarded!
- Mari Virik

Hi,
How did you solve this problem?
I have the same.
Thanks.

License for testing and production systems

Hi Experts
Can any one help me out on implementing license in my B1 System.
According to our contract we have licensed following user types:
User Type
Licensed
AddOn Access License 25
Professional User 5
Software Development Kit - Development Version 20
We have Test/development system in one hardware and Production system on different hardware. Please advice me how to request/allocate license for my test/development system and production system.
We tried creating a Test System in SAP Market place and requested license for test system. While requesting license for production system, it is found that the license is exceeded. In other words, developent system license also counted.
Please advice me on the best practices of B1 license implementation.
Thanks and regards
Ajith G

Hi,
Our customer wants to Keep the production data secure. Developers and consultants should not have the access to it.
Then you have only two options:
1.Either you should maintain a standalone b1 server for the developers and consultants to test their solutions and scenarios.
2.Otherwise you can create users in sql studio for accessing only the test database.
So that as per your requirement
All configurations and sample data will be kept in a test environment where developers and consultants can do their work.Once everything is correct Admin will do the transfer to production.
Note:New users can be created in the sql studio under Databases-><Company Db>->Security->Users, Rt.click new user

Documentation and Installer for "Oracle VM Management Pack" for EMGC?

Hi,
Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.
Thanks in advance,
Ranganath

>
Can you please provide locations/links to download the Documentation and the Installer for "*Oracle VM Management Pack"* for EMGC? I need to install the virtualization pack for provisioning OVM templates on Virtual machines.Hi Ranganath,
This feature is present in EM Grid Control 10.2.0.5 and you need to enable it..
Please refer to
How to Enable Oracle VM Management Pack in EM Grid Control 10.2.0.5 [ID 781879.1]
http://www.oracle.com/us/corporate/press/017955_EN
Regards
Rajesh

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

Documentation and configuration settings

Hi Experts,
Can any one provide documentation and configuration settings for the following areas.
Planning and budget,
PC Industrial,
Standard Cost Calculation,
Production Variance Analysis
Regards
Balu

HI Madhu
I have sent you the Io & Pctr documents to ur mail id. Plz assign points if its helpful.
Regards
Rajaram

Flash CC keyboard shortcuts for test/debug movie not working

My keyboard shortcuts all work exept for the various test / debug options, like debug on device,test on desktop. None of these options work.
I tried different keys combinations, so it's not the problem.
I'm tired of going trough the menu + submenu each time because I frequently switch (desktop is faster for quick testing).
I mean, I do this a hundred times a day. Please check this! thanks.

Hi, thanks for taking the time to answer.
Flash CC, Win7 64bit, I use sublime text, nothing else is running...
Absolutly nothing is happening if I try.
Correction: ctrl+enter has been successfully assigned (I see the text in the menu) and is recongnize for "test movie ...air debug desktop"
Others don't appear in the sub-sub-menu for testing or debugging over usb.
I've assigned them to ctrl+alt+enter/return and ctrl-shift-enter/return. (I've tried other keys as well...)
So it appear the problem is with test/debug USB...
EDIT: Just to be clear, I try to set custom shortcuts, to avoid the default behaviour (one shortcut to launch the last choice). this weird behaviour is probably the cause of the problem in the first place.

Change Management and Test Workbench for documentation

Hi,
I would like some clarification on the association between change requests and test workbench.
I'm going through scenarios such as creating a maintenance project, creating a task list and service message and then creating a transport request.
During these steps, I want to document the test results prior to migrating these transports into the production system.
My questions are - how do you link the maintenance project and also urgent corrections to a test procedure and documentation. It appears that by using solar01/solar02 and stwb_2/stwb_work, these tests are linked to a project and not necessarily a "change request"
I greatly appreciate if you can elaborate the association between the various areas a bit clearer for me.
Thanks!!!

You need to look for information on usage type "DI", "Development Infrastructure" or "NWDI" (all common abbreviations for the same thing). There were some very good presentations on NWDI at TechEd this year.
Here are some links to help documentation:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm">Administration of the Development Infrastructure</a>
<a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developersguide">SDN NetWeaver Developers Guide</a>
Rich

E-CATT documentation and I-Tutors for Test Workbench in SOLMAN

Similar Messages

Maybe you are looking for