E-Filing GB using XI

Hi All,
I am looking for a document which will explain more details about the integration scenario for e-Filing GB with SAP XI.
Is there any architecture document which will explain the XI scenarios for e-Filing inbound & outbound interface for GB ?
Please let me know what are the things need to keep in mind while implementing this.
Regards,
Reddy

Hi Barry ,
It is refereing the steps need to be done. I am more specific about the adapters it is going to use ( mentioned looking for communication channels in my last post ).
To my knowledge it uses ABAP proxy at one SAP R/3 end and HTTP adapter at other end . Looking for some confirmation on this.
Regards
Reddy

Similar Messages

Court filing requires use of firefox 3.6--how do I get rid of 5 and load 3.6 on a MAC

I'm a lawyer and Mac user. When unsuccessfully trying to use the electronic filing system for federal court, I was provided this pop up after recently upgrading my firefox:
"Important News Regarding Firefox 4/5 and CM/ECF
The current version of CM/ECF used in the District of Oregon does not support Firefox version 4 or version 5 (released on June 21). Users have reported a variety of problems when attempting to use CM/ECF with Firefox v. 4 and v. 5. Firefox versions 3.5 and 3.6 have both been extensively tested and are supported by CM/ECF. CM/ECF version 6 (anticipated for release in winter 2011) is expected to support later versions of Firefox.
As of June 21, 2011, the Mozilla Foundation will no longer issue patches or security updates for Firefox 3.5.x or Firefox 4. Users of older versions are prompted to upgrade to version 5. It is our understanding that version 3.6 will continue to receive patches and updates.
CM/ECF users have two options regarding this change. They can choose not to upgrade Firefox and continue to use version 3.6.x for the time being. Users who have already upgraded may uninstall Firefox and download the latest version of 3.6 from Mozilla:
http://www.mozilla.com/en-US/firefox/all-older.html
Alternatively, filers may use Internet Explorer versions 7 or 8 to access case information and file documents in CM/ECF.
CM/ECF development timelines are not certain and the release date for CM/ECF version 6 may change. In addition, this Court's adoption of version 6 will also involve some time as we prepare our database for the upgrade. We do not currently foresee the problem being resolved before the release of version 6."
I clicked on the link provided, but could not find a way to download 3.6. I'm disappointed that I will need to use an outdated version of firefox, but I file court documents through this website as my job so I don't see any way around it. Could someone please tell me how I can unload 5 and reload 3.6 so I can file things again? Thank you very much!
Lauren

You can look at the portable version of Firefox.
http://portableapps.com/apps/internet/browsers/portable_firefox

E-Filing GB using SAP XI with ECC 6.0

Hi,
Has any one come across the e-Filing GB Implementing the scenario using XI?
I have downloaded the Content(e-Filing GB.tpz & SAP HR 6.0.tpz) from SMP which is mentioned in the document.
Successfully imported the content in IR, i can able to see the all the objects for corresponding SWC,But the problem is when i'm clicking on NEWHIRE Integration Scenario from SAP HR Component it throws an error
" Error in accessing action" .
In ID i have imported the Integration scenario, Configuring through the wizard base configuration. While configuring in Step 2 Assigning service for Role 'SAP HR Component' , Product displays as TEMPLATE but it has to show the SAP ERP.
Step 3 Configure Connections i'm not able to see any communication channel.
SAP ERP : ECC 6.0
SAP XI     : PI 7.0 - SP09
If anyone come across the scenario, pls share your experiences.
Appreciate your help in advance.
Regards,
vasanth
Edited by: Vasanth Kumar.S on Feb 13, 2008 4:35 PM

Hi,
I have imported the content from Service market place as mentioned in the SAP Standard Document.
Downloaded Content: XI Content SAP HR 6.0 SP27, XI Content E-Filing GB SP12
When i'm accessing the Integration Scenario for SAP Hr 6.0 SWC, getting the follwing error
#7 06:35:32 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.BaseException
com.sap.aii.utilxi.misc.api.BaseException: Unable to access action
     at com.sap.aii.ib.client.scenario.manager.ProcessStep.loadProcessStepFromDatabase(ProcessStep.java:127)
     at com.sap.aii.ibrep.gui.scenario.ProcessView.fillModelForCurrentComponentView(ProcessView.java:452)
     at com.sap.aii.ibrep.gui.scenario.ProcessView.refreshTable(ProcessView.java:516)
     at com.sap.aii.ibrep.gui.scenario.ProcessDocument.afterLoad(ProcessDocument.java:79)
     at com.sap.aii.ib.gui.editor.XiDocument.load(XiDocument.java:315)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.execute(OpenCommand.java:208)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.ib.gui.operations.OperationsServiceProvider.executeDefaultOperation(OperationsServiceProvider.java:206)
     at com.sap.aii.ib.gui.nav.HierarchyNode.executeDefaultOperation(HierarchyNode.java:59)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.DefaultTreeCard.handleHierarchyEvent(DefaultTreeCard.java:123)
     at com.sap.aii.utilxi.swing.framework.navigation.impl.ThreadedTree.fireHierarchyActionEvent(ThreadedTree.java:472)
     at com.sap.aii.utilxi.swing.framework.navigation.impl.ThreadedTree.executeStandardOperation(ThreadedTree.java:1805)
     at com.sap.aii.utilxi.swing.framework.navigation.impl.ThreadedTree$DblClickHandler.mouseReleased(ThreadedTree.java:1770)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Root cause:
MESSAGE ID: com.sap.aii.ibrep.server.persist.swc.rb_texts.SWC_NOT_EXIST
com.sap.aii.ib.core.oa.ObjectAccessException: Software component version with GUID 169b6c50-15ec-11d9-a0ee-c0140a114c15 does not exist
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getObject(ServerObjectAccess.java:636)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.read(ServerObjectAccess.java:259)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessBean.read(ObjectAccessBean.java:88)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10.read(ObjectAccessRemoteObjectImpl10.java:1228)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10p4_Skel.dispatch(ObjectAccessRemoteObjectImpl10p4_Skel.java:630)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Serialized server exceptions:
MESSAGE ID: com.sap.aii.ibrep.server.persist.swc.rb_texts.SWC_NOT_EXIST (serialized)
com.sap.aii.utilxi.misc.api.ResourceException: Software component version with GUID 169b6c50-15ec-11d9-a0ee-c0140a114c15 does not exist
     at com.sap.aii.ibrep.server.link.InternalRepLinkService$LocalSwcCache.getSwcList(InternalRepLinkService.java:448)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.resolveToVersionInfoToolSpecific(InternalRepLinkService.java:507)
     at com.sap.aii.ib.server.link.InternalApplLinkService.resolveToVersionInfo(InternalApplLinkService.java:425)
     at com.sap.aii.ib.server.link.LinkServiceProvider$LinkServiceImpl.resolveToVersionInfo(LinkServiceProvider.java:201)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getVersionInformer(ServerObjectAccess.java:2262)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getObject(ServerObjectAccess.java:510)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.read(ServerObjectAccess.java:259)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessBean.read(ObjectAccessBean.java:88)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10.read(ObjectAccessRemoteObjectImpl10.java:1228)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10p4_Skel.dispatch(ObjectAccessRemoteObjectImpl10p4_Skel.java:630)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
MESSAGE ID: com.sap.aii.ibrep.server.persist.swc.rb_texts.SWC_NOT_EXIST (serialized)
com.sap.aii.ib.core.oa.NotFoundException: Software component version with GUID 169b6c50-15ec-11d9-a0ee-c0140a114c15 does not exist
     at com.sap.aii.ibrep.server.persist.swc.SwcCachedAccess.internalGet(SwcCachedAccess.java:162)
     at com.sap.aii.ibrep.server.persist.swc.SwcCachedAccess.getCurrentUsersVersion(SwcCachedAccess.java:105)
     at com.sap.aii.ibrep.server.persist.swc.SwcManager.getSoftwareComponent(SwcManager.java:847)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.getSwcListForSwcv(InternalRepLinkService.java:617)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.access$100(InternalRepLinkService.java:64)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService$LocalSwcCache.getSwcList(InternalRepLinkService.java:444)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.resolveToVersionInfoToolSpecific(InternalRepLinkService.java:507)
     at com.sap.aii.ib.server.link.InternalApplLinkService.resolveToVersionInfo(InternalApplLinkService.java:425)
     at com.sap.aii.ib.server.link.LinkServiceProvider$LinkServiceImpl.resolveToVersionInfo(LinkServiceProvider.java:201)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getVersionInformer(ServerObjectAccess.java:2262)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getObject(ServerObjectAccess.java:510)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.read(ServerObjectAccess.java:259)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessBean.read(ObjectAccessBean.java:88)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10.read(ObjectAccessRemoteObjectImpl10.java:1228)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10p4_Skel.dispatch(ObjectAccessRemoteObjectImpl10p4_Skel.java:630)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#6 06:35:32 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.misc.api.BaseException: com.sap.aii.utilxi.misc.api.BaseException: Unable to access action
     at com.sap.aii.ib.client.scenario.manager.ProcessStep.loadProcessStepFromDatabase(ProcessStep.java:127)
     at com.sap.aii.ibrep.gui.scenario.ProcessView.fillModelForCurrentComponentView(ProcessView.java:452)
     at com.sap.aii.ibrep.gui.scenario.ProcessView.refreshTable(ProcessView.java:516)
     at com.sap.aii.ibrep.gui.scenario.ProcessDocument.afterLoad(ProcessDocument.java:79)
     at com.sap.aii.ib.gui.editor.XiDocument.load(XiDocument.java:315)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.execute(OpenCommand.java:208)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.ib.gui.operations.OperationsServiceProvider.executeDefaultOperation(OperationsServiceProvider.java:206)
     at com.sap.aii.ib.gui.nav.HierarchyNode.executeDefaultOperation(HierarchyNode.java:59)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.DefaultTreeCard.handleHierarchyEvent(DefaultTreeCard.java:123)
     at com.sap.aii.utilxi.swing.framework.navigation.impl.ThreadedTree.fireHierarchyActionEvent(ThreadedTree.java:472)
     at com.sap.aii.utilxi.swing.framework.navigation.impl.ThreadedTree.executeStandardOperation(ThreadedTree.java:1805)
     at com.sap.aii.utilxi.swing.framework.navigation.impl.ThreadedTree$DblClickHandler.mouseReleased(ThreadedTree.java:1770)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#5 06:35:32 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.misc.api.BaseException: Unable to access action
#4 06:35:32 [AWT-EventQueue-0] ERROR com.sap.aii.ib.client.scenario.manager.ProcessStep: object access exception, reading action
Thrown:
MESSAGE ID: com.sap.aii.ibrep.server.persist.swc.rb_texts.SWC_NOT_EXIST
com.sap.aii.ib.core.oa.ObjectAccessException: Software component version with GUID 169b6c50-15ec-11d9-a0ee-c0140a114c15 does not exist
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getObject(ServerObjectAccess.java:636)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.read(ServerObjectAccess.java:259)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessBean.read(ObjectAccessBean.java:88)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10.read(ObjectAccessRemoteObjectImpl10.java:1228)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10p4_Skel.dispatch(ObjectAccessRemoteObjectImpl10p4_Skel.java:630)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Serialized server exceptions:
MESSAGE ID: com.sap.aii.ibrep.server.persist.swc.rb_texts.SWC_NOT_EXIST (serialized)
com.sap.aii.utilxi.misc.api.ResourceException: Software component version with GUID 169b6c50-15ec-11d9-a0ee-c0140a114c15 does not exist
     at com.sap.aii.ibrep.server.link.InternalRepLinkService$LocalSwcCache.getSwcList(InternalRepLinkService.java:448)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.resolveToVersionInfoToolSpecific(InternalRepLinkService.java:507)
     at com.sap.aii.ib.server.link.InternalApplLinkService.resolveToVersionInfo(InternalApplLinkService.java:425)
     at com.sap.aii.ib.server.link.LinkServiceProvider$LinkServiceImpl.resolveToVersionInfo(LinkServiceProvider.java:201)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getVersionInformer(ServerObjectAccess.java:2262)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getObject(ServerObjectAccess.java:510)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.read(ServerObjectAccess.java:259)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessBean.read(ObjectAccessBean.java:88)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10.read(ObjectAccessRemoteObjectImpl10.java:1228)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10p4_Skel.dispatch(ObjectAccessRemoteObjectImpl10p4_Skel.java:630)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
MESSAGE ID: com.sap.aii.ibrep.server.persist.swc.rb_texts.SWC_NOT_EXIST (serialized)
com.sap.aii.ib.core.oa.NotFoundException: Software component version with GUID 169b6c50-15ec-11d9-a0ee-c0140a114c15 does not exist
     at com.sap.aii.ibrep.server.persist.swc.SwcCachedAccess.internalGet(SwcCachedAccess.java:162)
     at com.sap.aii.ibrep.server.persist.swc.SwcCachedAccess.getCurrentUsersVersion(SwcCachedAccess.java:105)
     at com.sap.aii.ibrep.server.persist.swc.SwcManager.getSoftwareComponent(SwcManager.java:847)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.getSwcListForSwcv(InternalRepLinkService.java:617)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.access$100(InternalRepLinkService.java:64)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService$LocalSwcCache.getSwcList(InternalRepLinkService.java:444)
     at com.sap.aii.ibrep.server.link.InternalRepLinkService.resolveToVersionInfoToolSpecific(InternalRepLinkService.java:507)
     at com.sap.aii.ib.server.link.InternalApplLinkService.resolveToVersionInfo(InternalApplLinkService.java:425)
     at com.sap.aii.ib.server.link.LinkServiceProvider$LinkServiceImpl.resolveToVersionInfo(LinkServiceProvider.java:201)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getVersionInformer(ServerObjectAccess.java:2262)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.getObject(ServerObjectAccess.java:510)
     at com.sap.aii.ib.server.oa.ServerObjectAccess.read(ServerObjectAccess.java:259)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessBean.read(ObjectAccessBean.java:88)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10.read(ObjectAccessRemoteObjectImpl10.java:1228)
     at com.sap.aii.ib.sbeans.oa.ObjectAccessRemoteObjectImpl10p4_Skel.dispatch(ObjectAccessRemoteObjectImpl10p4_Skel.java:630)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#3 06:31:51 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
     at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
     at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
     at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
     at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.addType(InternalXiItemServiceForNameNamespaceObjects.java:68)
     at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.<init>(InternalXiItemServiceForNameNamespaceObjects.java:55)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:151)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:108)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#2 06:31:51 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
#1 06:31:51 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
     at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
     at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:44)
     at com.sap.aii.ib.gui.xiitem.CommonInternalXiItemService$ForVersionConflictList.<init>(CommonInternalXiItemService.java:326)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:147)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:108)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#0 06:31:51 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
When i'm importing the Integration Scenario in ID,Configuring the Wizard based,Instep 2 while assigning the serverices there is no objects were found for that particular Scenario.
Apprecaite you r help in advance
Thanks,
vasanth.
Edited by: Vasanth Kumar.S on Feb 26, 2008 2:28 PM

Cannot submit web filing form using acroread version 9.4.2 02/11/2011

Hello there.
I am running Fedora14 fully updated.
If I complete the interactive pdf form supplied by Companies House in the United Kingdom I get the following error message.
SSL Error!!!. Please install the CA certificate(s) for SSL communication.
If certificate resides on local disk, try "acroread -installCertificate [-PEM|
-DER] [pathname]" on tyhe command line.
If certificate resides on the server, try "acroread -installCertificate ewf.companieshouse.gov.uk 443" on command line.
So checked I the firewall settings.
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     udp -- anywhere             anywhere            udp dpt:domain
ACCEPT     tcp -- anywhere             anywhere            tcp dpt:domain
ACCEPT     udp -- anywhere             anywhere            udp dpt:bootps
ACCEPT     tcp -- anywhere             anywhere            tcp dpt:bootps
ACCEPT     all -- anywhere             anywhere            state RELATED,ESTABLISHED
ACCEPT     icmp -- anywhere             anywhere
ACCEPT     all -- anywhere             anywhere
ACCEPT     all -- anywhere             anywhere
ACCEPT     all -- anywhere             anywhere
ACCEPT     tcp -- anywhere             anywhere            state NEW tcp dpt:ssh
ACCEPT     tcp -- anywhere             anywhere            state NEW tcp dpt:http
ACCEPT     tcp -- anywhere             anywhere            state NEW tcp dpt:https
ACCEPT     udp -- anywhere             anywhere            state NEW udp dpt:ipp
ACCEPT     udp -- anywhere             224.0.0.251         state NEW udp dpt:mdns
ACCEPT     tcp -- anywhere             anywhere            state NEW tcp dpt:ipp
ACCEPT     udp -- anywhere             anywhere            state NEW udp dpt:ipp
ACCEPT     udp -- anywhere             anywhere            state NEW udp dpts:6881:6889
ACCEPT     tcp -- anywhere             anywhere            state NEW tcp dpts:6881:6889
ACCEPT     udp -- anywhere             anywhere            state NEW udp dpt:56849
ACCEPT     tcp -- anywhere             anywhere            state NEW tcp dpt:56849
ACCEPT     udp -- anywhere             anywhere            state NEW udp dpt:snmp
REJECT     all -- anywhere             anywhere            reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
ACCEPT     all -- anywhere             192.168.122.0/24    state RELATED,ESTABLISHED
ACCEPT     all -- 192.168.122.0/24     anywhere
ACCEPT     all -- anywhere             anywhere
REJECT     all -- anywhere             anywhere            reject-with icmp-port-unreachable
REJECT     all -- anywhere             anywhere            reject-with icmp-port-unreachable
ACCEPT     all -- anywhere             anywhere            PHYSDEV match --physdev-is-bridged
ACCEPT     all -- anywhere             anywhere            state RELATED,ESTABLISHED
ACCEPT     icmp -- anywhere             anywhere
ACCEPT     all -- anywhere             anywhere
ACCEPT     all -- anywhere             anywhere
ACCEPT     all -- anywhere             anywhere
REJECT     all -- anywhere             anywhere            reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
Which looks ok to me.
[user@k8 tv]$ acroread -installCertificate ewf.companieshouse.gov.uk 443
Fetching certificate from website....
depth=2 C = US, ST = UT, L = Salt Lake City, O = The USERTRUST Network, OU = http://www.usertrust.com, CN = UTN-USERFirst-Hardware
verify return:1
depth=1 C = IE, ST = Dublin, L = Dublin, O = Digi-Sign Limited, OU = Terms and Conditions of use: http://www.digi-sign.com/repository, CN = Digi-Sign CA Digi-SSL Xp
verify return:1
depth=0 C = GB, ST = Wales, L = Cardiff, O = Companies House, OU = Web Filing, OU = Provided by Digi-Sign Limited, OU = Digi-SSL Xp, CN = ewf.companieshouse.gov.uk
verify return:1
DONE
Processing ....
The website presented the following Certificate
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            07:a4:23:f4:cc:ef:4e:e9:d5:89:76:b4:ee:2f:4c:4b
        Signature Algorithm: sha1WithRSAEncryption
        Issuer: C=IE, ST=Dublin, L=Dublin, O=Digi-Sign Limited, OU=Terms and Conditions of use: http://www.digi-sign.com/reposi
tory, CN=Digi-Sign CA Digi-SSL Xp
        Validity
            Not Before: Jul 26 00:00:00 2009 GMT
            Not After : Jul 26 23:59:59 2011 GMT
        Subject: C=GB, ST=Wales, L=Cardiff, O=Companies House, OU=Web Filing, OU=Provided by Digi-Sign Limited, OU=Digi-SSL Xp,
CN=ewf.companieshouse.gov.uk
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (1024 bit)
                Modulus:
                    00:e8:68:c9:f7:4f:c5:98:18:5f:d6:34:d0:2a:3d:
                    53:f8:40:6f:4b:0a:ad:7b:d1:5c:99:85:8a:dd:19:
                    70:9d:9a:03:95:20:1d:a1:c3:9d:a9:cf:4f:10:97:
                    dc:5e:1e:c8:c0:d7:50:09:7c:e3:a5:df:48:3d:4e:
                    09:06:49:1b:ad:dc:b9:f4:42:35:ea:fd:14:e6:c9:
                    7d:2a:ef:1e:80:3f:26:cd:8e:2f:56:be:13:3c:3e:
                    f0:62:47:e2:ca:53:f8:8d:57:e7:5d:17:81:b6:1a:
                    f1:fd:1b:4a:e6:43:83:05:8a:02:92:a4:2d:57:07:
                    b8:f8:7c:8c:93:a1:09:ad:6f
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Authority Key Identifier:
                keyid:33:5A:0B:4E:35:DA:B8:8E:87:05:64:5F:D8:EC:7D:25:98:DA:BA:3F
            X509v3 Subject Key Identifier:
                24:CB:12:A4:AA:53:7E:96:83:80:ED:48:FB:D1:6D:CD:B8:3C:1B:BA
            X509v3 Key Usage: critical
                Digital Signature, Key Encipherment
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Extended Key Usage:
                TLS Web Server Authentication, TLS Web Client Authentication
            X509v3 Certificate Policies:
                Policy: 1.3.6.1.4.1.6449.1.2.2.9
                  CPS: http://www.digi-sign.com/repository
            X509v3 CRL Distribution Points:
                Full Name:
                  URI:http://crl.digi-sign.com/DigiSignCADigiSSLXp.crl
                Full Name:
                  URI:http://crl2.digi-sign.com/DigiSignCADigiSSLXp.crl
            X509v3 Subject Alternative Name:
                DNS:ewf.companieshouse.gov.uk, DNS:www.ewf.companieshouse.gov.uk
    Signature Algorithm: sha1WithRSAEncryption
        65:4d:83:e7:fa:42:f4:b2:fa:c9:bb:bb:68:56:63:39:f1:14:
        98:a8:cb:35:42:32:40:a8:4e:54:95:cd:c9:6c:31:f3:f8:74:
        00:df:80:4f:b5:61:65:06:7e:fc:a5:30:36:da:55:10:58:21:
        c6:82:ba:f0:11:42:37:5a:6e:82:16:29:be:09:d3:a6:b9:11:
        fb:f3:24:1a:ea:bb:73:ea:79:59:67:d7:bb:c8:48:51:bd:70:
        01:6e:f2:11:bd:b7:86:13:9a:e9:22:9e:3b:c1:a6:a0:78:fc:
        eb:e0:a7:2b:48:2c:26:b3:f9:f4:5b:bd:54:2f:56:83:1f:0a:
        ee:2f:50:40:7f:c7:1a:e9:07:da:cd:23:18:14:c8:46:f5:f4:
        c3:26:fa:af:12:8e:d8:ac:7a:b7:03:5c:8e:6e:23:9c:1b:ce:
        53:03:1a:8e:74:98:47:c9:c5:3a:fa:7f:d3:f6:ca:dd:a4:0b:
        50:02:40:64:cf:77:1d:72:3e:9b:4f:f9:c5:df:50:2e:90:a3:
        3d:76:62:d8:ef:99:6e:be:1a:b4:89:5e:93:89:fd:0e:f5:47:
        0b:2a:a6:08:c5:e5:6f:15:e9:82:42:ba:6a:0b:31:76:dc:d8:
        77:70:3f:0a:87:2b:b3:21:0d:4e:09:62:9f:53:14:11:b3:ec:
        0f:fb:4a:02
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
Do you want to accept and install it (y|n)? [n] y
Certificate successfully installed.
Which looked ok to my inexperienced glance.
So I tried a resubmission.
I got the first error dialog again, followed by a second which said:
An error occurred during the submit process. Cannot process response due to unknown content type.
Can anybody here help me with this at all?
It would be a real boon to all of Britains UNIX users if anyone could suggest a way forward- as it would appear that the mandated web filing process
is preventing all UNIX and Linux users from filing their compulsory company returns online..
Thankyou.

I wish to reiterate anonym0u5 concerns for this problem, but it could be a problem with Companies House.
I did
acroread -installCertificate -PEM ewf.companieshouse.gov.uk
acroread -installCertificate -PEM UTN-USERFirst-Hardware
acroread -installCertificate -PEM Digi-Sign\ CA\ Digi-SSL\ Xp
acroread -installCertificate -PEM Builtin\ Object\ Token\:AddTrust\ External\ Root
after having clicked the padlock at the top in Chrome and downloaded the certificates. Note the slight difference in file name.
then restarting acroread I get the above (again). So I stop it and do as it says:
acroread -installCertificate xmlgw.companieshouse.gov.uk 443
Unfortunately:
The problem still persists. I have written to Companies House:
Filling in my CT600 online and taking advantage of the ability to submit accounts to Companies House, I put in my company number and authentication code but then am presented by the following:
so I save the file, close Acrobat and do as it says:
nigel@p4dx2:~/Documents/accounts/nsl/certificates$ acroread -installCertificate xmlgw.companieshouse.gov.uk443
which eventually returns
Do you want to accept and install it (y|n)? [n] y
Certificate successfully installed.
Then I reopen the CT600 with Acrobat. But unfortunately the same thing happens. What digital certificate is needed? Where can I find it?
I will let this forum know of any response.

Filing mail using the keyboard?

I have recently switched to Apple Mail, which I have to say is very fast - much faster than Thunderbird. It's very slick and I'm very happy with it.
On Thunderbird I had a really useful add-on with which I could file mail into a specific folder simply by using a keyboard shortcut. I would then be presented an auto-completing text box where I would start to type in the name of the folder where I wanted the message filed.
Is there an equivalent facility in Apple Mail? I can use the mouse of course, but it's so much slower.
Thanks in advance.

In that case, then you're going to feel better using stuff like MailTags or Act-on. I prefer smartfolders because the are... smart ?
Having Unread, Flagged, Today, Yesterday, 3 days, week, month, last month, Threads, Recently Viewed, Recently Sent, Co-Workers, Family, Friends, Attachments, 2007, 2006, ..2005, etc... I think that I make an interesting use of the smart folders. But, of course, this cannot apply to your IMAP setup and desire to replicate this on every application (Web, iPhone, etc.)
Good Luck then!
Message was edited by: Martin Marconcini

Header and filed vlues n the same row in reciver file using FCC

Hi,
I have a scenario ,where receiver file should contain only one row (the row contain all the filed values using end separator) .
and also need to display header (file should contain only one row including header and field values).
Now i am getting 2 rows , one row contain all header ( i did using name.headerfields-3) and the second row contain all the filed values.
please let me know is there a way i can combine both header and field values in one row using receiver FCC.
Regards
Surya
Edited by: SuryaPrakash Reddy on Oct 28, 2011 9:03 AM

SuryaPrakash Reddy wrote:
I thought about this (put your header in first field of your target structure.),but i want do this as last option.
this is the best option you have here since from a standard configuration you will not be able to achieve this.

Dynamic Sorting on Multiple filed in Crystal report 2008

Hi
I am using Crystal report 2008 sp3 full build with hotfix 3.3 along with ASP.NET 2.0
I have implimented the multi filed sorting using the record sort export and setting the sort order in the report designer.
Now my requirement is such that i would like to have dynamic sorting on multiple fileds while report is displayed in the UI.
Means suppose i have a report with Customer region,name,city,rating,status etc.
Now by using the sort control i would like to have the functionality in such a way that if user
a) first sorts on the region then the records should be first sorted by region
b) then sorts on the city then the records should be sorted first by region then by city
c) now sorts on the rating then the records should be sorted first by region ,second by city and then by rating
Now other user may do
a) first sorts on the rating then the records should be first sorted by rating
b) then sorts on the status then the records should be sorted first by rating then by status
c) now user sorts on the region then the records should be sorted first by rating,second by status and then by region
and so on the sorting criteria changes from user to user through the UI.
Is there any way to achieve the dynamic kind of sorting with Crytsal report 2008 where we can set the order of the fileds at sorting in UI dynamically .The sorting order of the fields are not known at the time of design of the report and its completely depends on the user's need.
Please let me know if you require any information on the same.
Regards,
smitha

Hello,
   Good Day!
   Thanks for your answer.
   Could you please explain me in detail how to achieve this functionality?
   Do i need to create a static parameter?
   I get my data set through the command option in crystal report.So i think i need to go by formula in the report.
   i am just putting down the steps to follow.Please correct me if i am wrong.
step1 :Create s static parameter with the name SORT.
step2: create the formula as you have mentioned like
    (IF {?Sort}='Vendor Number' THEN {Pr_Voucher_Status;1.Vendor_Key}& " "& {Pr_Voucher_Status;1.ap_remt_key}
    & " " & {@date}
   else
    IF {?Sort}='Invoice Number' THEN {Pr_Voucher_Status;1.ap_vchr_invno}& " " & {Pr_Voucher_Status;1.Vendor_Key}&
    " " &{@date}
   else
   IF {?Sort}='Invoice Amount' THEN {Pr_Voucher_Status;1.ap_vchr_amtc}& " " & {Pr_Voucher_Status;1.Vendor_Key}&
     " " &{@date})
    I could not understand what this formula is really doing .
    Could you please tell me what the following names indicates? :
              Pr_Voucher_Status :- Table/Command name ??
              Vendor Number,Invoice Number etc.. :- ??
             Vendor_Key,ap_vchr_invno,ap_vchr_amtc .. :- Filed names ??
             use of 1.{} :- ??
step3: place the below formula in the page header to display the sort order
    (if {?SORT}='Vendor Number' then "Vendor Number, Remit To, Invoice Date"
          else if {?SORT}='Invoice Number' then "Invoice Number, Vendor Number, Invoice Date"
          else if {?SORT}='Invoice Amount' then "Invoice Amount, Vendor Number, Invoice Date") .
Note:-My report does not have grouping.Do i need to have grouping?
in this case how the sort control will work ?
As i have mentioned in the first post the order of sorting is completely depends on the user's perspective .
The report is used by the whole organization ..
i mean the people with different roles like Manger,Team leads,modul leads,developers ,testers etc..
the usage of report varies according to the roles so the sort order also.
Regards,
smitha.
Edited by: smitha thomas on Mar 16, 2011 5:01 AM

Will Installing more RAM improve performance, IF laptop has "available memory" not being used?

My laptop has 2x 1GB of RAM.
Right now, and usually, The Physical Memory shown in Task Manager, shows that there is "available memory" (currently it's 500megs worth). (And "system cache" says 300megs.)
There is also, right now, 2.5GB of page filing being used.
If I were to replace the 2GB of RAM with 4GB (of the same Mhz), would there be a noticable increase in performance?
(windows XP 32bit OS)

A matched set of DDR2 ram will perform a lot faster one memory not matched. Its required for the double data rate to work. Hence 2+2 is the max you'd need/want in a 32bit machine. Windows 7 was built for large memory footprints. XP was built to run just barely in 64MB but really needed a min of 128MB to support a network connection and printing. It was never enable to truely go a whole lot further than a few machines built capable of 1GB. There was even a bug which was patch causing problems if a !GB or more was available. Just because it can see it does not mean it actually uses it !! The kernal by default is swapped in/out of ram even in larger memory systems. Why, it was is not aware of the extra memory and does not change its behavour from a 512MB machine.
As for the 1333Mhz ram the timing may be faster than the other memory used. Hence it flow the data faster on the bus. Fewer delays in various cycles including the RAS/CAS etc but thats all under the hood so to speak.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

How to use Optimistic Locking in Toplink

Hi!
Iam using Toplink for O/R mapping, and for each table
iam using one TimeStamp field, and i specified that
field as Locking filed, by using the Loking option, and checked the TimeStampLocking option.
Now my question is do i need to update the Timestamp filed
each time if i create a new record and while modify an existing record.
And also do i need to compare the Timestamp for the record which client as read previousley to the TimeStamp in the database for the record manullay lik
suppose t1 is the timeStamp, which i got from the client,
and t2 is the timestamp which i read from the Database.
Now my question is, is it necessary to compare the timestamp.

Once optimistic locking has been configured TopLink will manage the updating and comparing of the OptimisticLocking value. There is no requirement for you to manage this value.
--Gordon

How can I work with lightroom when I use two computers ?

I am new to Lightroom and work with a laptop at home and a PC at work. Before I started to use LR3 I simply duplicated my pic files onto both machines, edited on whichever machine I wanted and then synchronised the folders. This system provided me with a working copy at either home or work and also a backup copy on the other machine.
I would like to operate the same system with LR3 but am unable to figure it out due to the automatic filing system used by the programmme to seperate the raw files and the instructions for those files.
Can anyone provide me with simple step by step instructions on how to transfer the files/instructions by using a flash drive and "Copy and replace"system
as I am totally confused by the grammar, syntax, and terminology used by Adobe.

Hi Geoffbubbles,
if you see only 1 photo you did export only 1 photo in the catalog.
Make sure you select all (e.g. <ctrl> A or remove the tick from "export selected photos only" in the dialog box of export-as-catalog =>will pick the total folder).
What Dorin mentions are catalogs as transportation vehicles between the two LR computer catalogs.
Let's assume you start on your home-comp and transfer to the work-comp.
When you EXPORT you give a name "home-to-work" for the transport catalog. You decide if you include the pictures by ticking "exclude negative files".
You would do so only for the first time, when your work-comp would not yet have them.
These are the original files which would never be touched, but which LR needs to have available to do develop work (i.e. to write develop instructions into its database). [Or maybe only you need them in order to have LR display the effects of what you are doing, if your slider settings achieve your desired result.]
When you transfer your new settings from the work-comp to the home-comp which has the original files already you only need to transfer the DB-records for the files, i.e. the catalog parts. Then it is sufficient to export-as-catalog (name it "work-to-home") without the tick for the negative files. Which will obviously save a lot of data to transfer.
As would leaving off the tick for "include available previews", but then your receiving computer would have to render the previews itself - your choice where you spend the effort.
Depending on your ticks checked in export dialog the data on the transfer stick will show different folders:
1 wrapping folder with the name you specified as transportation catalog name (in the example above "home-to-work")
therein the catalog file *.lrcat (home-to-work.lrcat)
if "include negative files" ticked: as many subfolders as the original folder structure/names of the pictures in it had on the sending machine
if "include available previews" ticked: an *Previews.lrdata-folder ("home-to-work Previews.lrdata") with lots of subfolders labelled 0...F
On the receiving computer, when you IMPORT FROM CATALOG, you only select the *.lrcat-file.
In the dialog box you decide if you import the negative files (prereq you had included them) or if you just add them without moving (why not leave them on the stick i.o. actually copying over to the work-comp?). If there are no new photos, but just new settings, you can either overwrite your old settings (which is probably your intention) or tick "preserve old settings as virtual copies".
When you use Dorins smart collection "Touched today" the virtual copies should not show up upon re-export on the way "work-to-home", provided you have further tweaked the master versions only. Or they do because in the end you liked them better and continued tweaking on them.
Note if you do not include previews: you might need to tell LR on the receiving comp to rerender the previews if it contains the photos and earlier previews already - I am not sure, if LR starts off on its own to rerender them.

Insert fields in a report header using SortValue() function (PLD)

Hi...
I need to create a user report, based on a query, that shows the following fields.
CardCode | CardName | Phone1 | E_mail (header)
Adress | AddrType | Street | Streetno ...(repetitive area)
I have inserted only one filed sucessfully using the <Group 1> and adding the SortValue() function in the header with the cardcode field...
How can i insert the other fields in the header?
thanks...

I just put a formula in the header with the Field name...and works fine...
Thanks....

L7650 Digital Filing via WIFI

I have a proper operating L7650 All-In-One. Printing via WIFI or ethernet cable works perfectly.
I can not get the 7650 to connect to a Windows 7 laptop for "Digital Filing" when using WIFI. Pressing the Start Scan button causes the printer to try connecting but eventually it quits with "Cannot connect to \\Inspir...\Scanned Files . Make sure the remote computer is turned on. Press OK to continue". If I plug in an ethernet cable all works well so sharing, path name, security, etc. are all ok.
How can I get Digital Filing to work over WIFI?
Thanks!
Ron
This question was solved.
View Solution.

I positioned my LT 6 ft. from the wireless router so signal strength would not be a problem. It's also close enough that my ethernet cable reaches easily.
Using Internet Explorer I accessed the built-in web page in my L7650. Going to Settings - Direct Digital Filing Speed-dial I filled out the appropriate entries for the Address Book and saved them to the 7650. Looking at the screen of the 7650 I can see the network path change when I make and save the changes, thus, I'm able to access the 7650 via WIFI.
I then went to the 7650 and pressed Digital Filing and Start Scan to initiate the process. The printer tries to connect but in about 15 sec. it quits with "Cannot connect to \\Inspir...\Scanned Files . Make sure the remote computer is turned on. Press OK to continue".
If I now connect the ethernet cable, disable WIFI and allow time for the LT to get on the network step 3 works properly and the document gets scanned and saved correctly.
Pulling the cable and re-enabling WIFI returns the LT to the problem stated in step 3.
Ron

ABAP query using PSJ

Is there a way to get the company code project profile and the co amount using an Query .
something similar to CJI3 but with the comapny code and project profile.
Or if i have to use ABAP.

There are two things. ( Your question is not quite clear, post question clearly, so platform can help you better way )
1. Restrict you report selection based on project Project profile, company code etc. give * in project filed and use dynamic selection functionality
2. If after execution you wanted to display some additional filed
First check change layout option after executing CJI3, if your required field is not there in that case, your requirement can be addressed via Exit COOMEP01 (Actual EXIT_SAPLKAEP_001)
With Regards
Nitin P.

8610e digital filing network folder write permission failure

I have 8610e all-in-one. trying to activate ditial filing. used wizard. keep getting mesage at test time indicating that the folder is not set up correctly; either read only or incorrect permissions. i used the wzard to set up a new folder (digital docs), have set share permissions at every level of path (c:/jean-laptop/jean/documents/digial docs) to eliminate read only, set permissions for everyone to full etc. no maatter what i do, i get the same nessage at test time that it cannot write to the folder. help
brownierl

Hi @brownierl,
Welcome to the HP Forums!
I understand that you are trying to setup the digital filing network folder for your HP Officejet pro 8610. I am happy to help!
I would recommend to go through this guide, Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Offi.... Select How to scan directly to a network folder (network connections only), when you get to Step two: Set up the Scan to Network Folder. Make sure to select Windows, and try each of the options available.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can't drag the currency key in local currency to the pool of fields not use

Hi everyone,
Hopefully you can enlighten me with this issue coz im trying to drag the currency key in local currency to the pool of fields not used (UCWB<Data Model<Data Basis<Data Model(TAB)) but nothing happened, i can't transfer it to the pool of fields not used.
Note:I came with this decision(transferring the currency key in local currency to the pool of fields not used ) because SAP prompt me with this:
The currency key in local currency is not required in the data basis. It is merely an implicit part of the data model
I really dont have any idea why i can't drag it to the pool of filed not used, i tried to look for some sap notes but i can't find one.
thanks in advance

Hi Dan,
Actually it is not really an error, i just would like to pattern the configuration of our newly upgraded BI server to our BW server.
In our BW server, the currency key in local currency is mapped to the pool of fields not used. I can't seem to do the same in the BI server because everytime I try to drag the currency key in local currency to the pool of fields not used, nothing happens, it isn't mapped.

E-Filing GB using XI

Similar Messages

Maybe you are looking for