E&M troubleshoot
My client is using a Avaya PBX to connect to Cisco Router. I am having two sites between which calling has to be set up. I have put the dial-plan in place but the call is not working.. I suspect an E&M issue. Can someone explain me what In-seizure and out-seizure is and can u pls tell me why the out status on second router is showing as seized..
IN OUT
PORT CH SIG-TYPE OPER STATUS STATUS TIP RING
=============== == ============ ==== ====== ====== === ====
0/0/0:0 01 e&m-wnk dorm idle idle
0/0/0:0 02 e&m-wnk dorm idle idle
Voice card specific Info Follows:
Operation Type is 2-wire
E&M Type is 1
Signal Type is wink-start
Dial Out Type is dtmf
In Seizure is inactive
Out Seizure is inactive
IN OUT
PORT CH SIG-TYPE OPER STATUS STATUS TIP RING
=============== == ============ ==== ====== ====== === ====
0/3/0:0 01 e&m-wnk down idle seized
0/3/0:0 02 e&m-wnk down idle seized
0/3/0:0 03 e&m-wnk down idle seized
0/3/0:0 04 e&m-wnk down idle seized
Voice card specific Info Follows:
Operation Type is 2-wire
E&M Type is 1
Signal Type is wink-start
Dial Out Type is dtmf
In Seizure is inactive
Out Seizure is active
Hi,
Your name might have be in Workflow group....
requrest your support consultant to remove your name from the group... so that you wont receive the mail...
Thanks & REgards
Anand
Similar Messages
-
My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
ThanksTry a different cable. And are you connecting directly to your computer or through a USB hub?
-
Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sailHello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
IPod not recognized by Windows or iTunes, troubleshooting didn't help.
I have an 80 gig iPod classic. When I plug it into my computer it is not recognized by either Windows or iTunes. However, it does charge while connected. I have gone through every troubleshooting tip on the Apple website and nothing has worked. The only thing I was unable to try was restoring it because it needs to be recognized in iTunes in order to do so. Any suggestions?
I had the same problem.......
OK, after 8 hours.. It worked..... I was installling and uninstalling only itunes 9 but not all the apple components in my computer....... uninstall itunes 9 and all its components: Apple Mobile Device Support, Apple Software Update, Bonjour, iPod for Windows, iTunes, QuickTime.
Under the folder c:\Program Files delete the following folders:
Apple Software Update, Bonjour, iPod, iTunes, QuickTime
Search for any hidden folders named "Apple Computer" or "Apple" These may appear under AppData or Local/AppData, Delete these folders.
Restart your Windows machine and install itunes 9 and quicktime again..... good luck!!!!! -
Mac Mini Crashed 2x In Past Week - How To Troubleshoot Console Errors?
Hello, my mac mini 2011 has crashed on me twice in the past week. Once it happened while I was returning to my desk. I heard a noise... like something electrical shutting down abruptly. The second time it happened, the mac mini was in the process of restarting.. (same sound), it just automatically restarted again and then booted up. Not sure if that was related to an update that was waiting to install.
My issue is, how do I troubleshoot the crash? I know most people go to the console.... I have no idea how to define what is going on or find out exactly what caused the crash. There are a ton of messages in there... some are normal? Other things definitely indicate a problem but I'm not sure how to fix it.
I copied and pasted the message from the time I rebooted here.. Some highlights I see:
1) Problems with iCal
2) Some deny machine lookups: What is this? ([1034]) mdworker(1034) deny mach-lookup com.apple.ls.boxd
3) Missing semicolin in dictionary
4) and unknown Cisvo VPN? SystemStarter[513]: Unknown service: CiscoVPN"
5) Some file permissions errors: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist"
6) SendFlattenedData error: coreservicesd[59]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationLaunch to notificationID=140"
7) Driver errors:
5/24/13 4:23:00.049 PM ConsumerTouchDriver[241]: Could not find image named 'TouchRingToggleLEDSlitOff'.
5/24/13 4:23:00.060 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleLeft'.
5/24/13 4:23:00.067 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleRight'.
8) Various invalid connections: WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195 (there are more of these)
9) Boot Strap lookup failures: timezoned[160]: bootstrap_look_up failed (44e)
Just too many here as you can see. Please note some network names and IP addresses have been redacted. I also took out some multiple Google Update entries for brevity. They look normal for most part except for the part that it showed up about 7 or 8 times.
if anyone knows how to decipher this please let me know.
5/24/13 4:16:11.446 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=9487
5/24/13 4:16:11.523 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
5/24/13 4:16:11.526 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
5/24/13 4:16:11.526 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit] Cancel UI for running services with Client PID: 94616
5/24/13 4:16:17.470 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
5/24/13 4:16:17.471 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
5/24/13 4:16:17.472 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit] Cancel UI for running services with Client PID: 96498
5/24/13 4:16:17.691 PM iTunes[84926]: 2013-05-24 04:16:17.691209 PM [AVSystemController] Stopping AirPlay
5/24/13 4:16:18.186 PM WindowServer[82]: CGXUnregisterWindowWithSystemStatusBar: Invalid window (31a1)
5/24/13 4:16:18.960 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
5/24/13 4:16:18.961 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
5/24/13 4:16:18.961 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit] Cancel UI for running services with Client PID: 66380
5/24/13 4:16:45.365 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationReady to notificationID=8709
5/24/13 4:16:47.839 PM com.apple.usbmuxd[53255]: stopping.
5/24/13 4:16:47.852 PM com.apple.launchd.peruser.502[181]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 9 seconds
5/24/13 4:16:48.394 PM com.apple.usbmuxd[9101]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
5/24/13 4:16:49.637 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=8709
5/24/13 4:16:49.903 PM 1PasswordAgent[319]: [HYBI] socketDidDisconnect: Error Domain=GCDAsyncSocketErrorDomain Code=7 "Socket closed by remote peer" UserInfo=0x1050a0c80 {NSLocalizedDescription=Socket closed by remote peer}
5/24/13 4:16:50.020 PM prl_naptd[6584]: Exiting Parallels Network Daemon
5/24/13 4:16:51.741 PM Parallels[9136]: Stopping Parallels Dispatcher Service
5/24/13 4:16:53.719 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=8709
5/24/13 4:16:54.137 PM Parallels[9142]: Stopping Parallels networking
5/24/13 4:16:54.184 PM watchdog[9146]: Stop watching /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd
5/24/13 4:16:54.342 PM watchdog[9154]: file /var/run/prl_watchdog-2323cae42fd8.pid, pid 6661
5/24/13 4:16:54.348 PM watchdog[9156]: /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd stop
5/24/13 4:16:54.369 PM prl_naptd[6683]: Exiting Parallels Network Daemon
5/24/13 4:16:54.618 PM WindowServer[82]: dict count after removing entry for window 0x3d is 0
5/24/13 4:16:54.826 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.826 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.827 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.830 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 211847
5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 211847
5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 211847
5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
5/24/13 4:16:54.832 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
5/24/13 4:16:54.832 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
5/24/13 4:16:54.832 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 210883
5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 210883
5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 210883
5/24/13 4:16:54.838 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[863]) Exited: Killed: 9
5/24/13 4:16:54.839 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=229
5/24/13 4:16:54.841 PM com.apple.launchd.peruser.502[181]: (com.sophiestication.mac.CoverSutra.agent[298]) Exited: Killed: 9
5/24/13 4:16:54.855 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=306
5/24/13 4:16:54.867 PM com.apple.launchd.peruser.502[181]: (com.dayoneapp.dayone-agent[305]) Exited: Killed: 9
5/24/13 4:16:54.868 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=137
5/24/13 4:16:54.868 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=11081
5/24/13 4:16:54.881 PM com.apple.launchd.peruser.502[181]: ([0x0-0x2c02c].com.apple.inputmethod.ironwood[272]) Exited: Killed: 9
5/24/13 4:16:54.890 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=161
5/24/13 4:16:54.891 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=11093
5/24/13 4:16:54.903 PM UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=45575 Died
5/24/13 4:16:54.909 PM 1PasswordAgent[319]: Shutting down 1PasswordAgent 3.8.21 #32009 built Apr 24 2013 16:09:31
5/24/13 4:16:54.924 PM com.apple.launchd.peruser.502[181]: ([0x0-0x5c05c].com.apple.AppleSpell[369]) Exited: Terminated: 15
5/24/13 4:16:54.924 PM com.apple.launchd.peruser.502[181]: ([0x0-0x63063].com.apple.ImageCaptureExtension2[432]) Exited: Killed: 9
5/24/13 4:16:54.940 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=218
5/24/13 4:16:54.941 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=226
5/24/13 4:16:54.941 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=286
5/24/13 4:16:54.953 PM com.apple.launchd.peruser.502[181]: ([0x0-0x60b60b].com.apple.iTunesHelper[17906]) Exited with code: 1
5/24/13 4:16:54.954 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.954 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.955 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.955 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.955 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:54.969 PM Office365Service[8836]: System shutdown notification
5/24/13 4:16:54.969 PM com.apple.launchd.peruser.502[181]: ([0x0-0x1a0da0c].com.apple.iCal[90332]) Exited: Killed: 9
5/24/13 4:16:54.970 PM com.apple.launchd.peruser.502[181]: (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[7581]) Exited: Killed: 9
5/24/13 4:16:55.163 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=153
5/24/13 4:16:55.173 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:55.173 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:55.174 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:55.174 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:55.174 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
5/24/13 4:16:55.191 PM com.apple.launchd.peruser.502[181]: ([0x0-0x4d04d].com.wacom.Consumer_TouchDriver[339]) Exited with code: 1
5/24/13 4:16:55.234 PM com.apple.launchd.peruser.502[181]: (com.apple.mdworker.mail.01000000-0000-0000-0000-000000000000[9082]) Exited: Killed: 9
5/24/13 4:16:55.899 PM com.apple.launchd.peruser.502[181]: (com.wacom.pentablet[318]) Exited with code: 1
5/24/13 4:16:55.917 PM com.apple.launchd.peruser.502[181]: (com.apple.UserEventAgent-Aqua[209]) Exited: Killed: 9
5/24/13 4:16:55.918 PM Parallels[9159]: Parallels Networking was stopped
5/24/13 4:16:56.018 PM com.apple.launchd.peruser.502[181]: (com.apple.storeagent[859]) Exited: Killed: 9
5/24/13 4:16:56.035 PM com.apple.launchd.peruser.502[181]: (com.apple.quicklook[9069]) Exited: Killed: 9
5/24/13 4:16:56.038 PM Parallels[9162]: Unloading kernel extension prl_netbridge.kext
5/24/13 4:16:56.204 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=107
5/24/13 4:16:56.397 PM loginwindow[38]: DEAD_PROCESS: 38 console
5/24/13 4:16:56.453 PM com.apple.launchd.peruser.502[181]: (com.evernote.EvernoteHelper[306]) Exited: Killed: 9
5/24/13 4:16:57.527 PM Parallels[9172]: - kext com.parallels.kext.netbridge found loaded.
5/24/13 4:16:57.589 PM WindowServer[82]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
5/24/13 4:16:57.589 PM WindowServer[82]: Session 256 released (1 references)
5/24/13 4:16:57.589 PM WindowServer[82]: Session 256 released (0 references)
5/24/13 4:16:57.590 PM WindowServer[82]: loginwindow connection closed; closing server.
5/24/13 4:16:57.605 PM imagent[263]: Quit - notifying about shutdown
5/24/13 4:16:57.605 PM imagent[263]: Quit - shutting down daemon
5/24/13 4:16:58.677 PM Parallels[9182]: Unloading kernel extension prl_vnic.kext
5/24/13 4:16:58.701 PM airportd[9167]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
5/24/13 4:16:58.000 PM kernel[0]: com.parallels.kext.prlnet 8.0.18483.860857 is unloading.
5/24/13 4:16:58.000 PM kernel[0]: free vms_list while it is not empty
5/24/13 4:16:59.181 PM Parallels[9187]: - kext com.parallels.kext.vnic found loaded.
5/24/13 4:16:59.000 PM kernel[0]: com.parallels.kext.vnic 8.0.18483.860857 is unloading.
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: wait for detach for 0
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus::detach_handler for 0
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: detached 0
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic: destroyed vnic0
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: wait for detach for 1
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus::detach_handler for 1
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: detached 1
5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic: destroyed vnic1
5/24/13 4:16:59.400 PM Parallels[9194]: Unloading kernel extension prl_usb_connect.kext
5/24/13 4:16:59.441 PM loginwindow[9176]: Login Window Application Started
5/24/13 4:16:59.593 PM Parallels[9199]: - kext com.parallels.kext.usbconnect found loaded.
5/24/13 4:16:59.797 PM Parallels[9207]: Unloading kernel extension prl_hid_hook.kext
5/24/13 4:16:59.820 PM WindowServer[9204]: Server is starting up
5/24/13 4:16:59.864 PM WindowServer[9204]: Session 256 retained (2 references)
5/24/13 4:16:59.864 PM WindowServer[9204]: Session 256 released (1 references)
5/24/13 4:16:59.884 PM WindowServer[9204]: Session 256 retained (2 references)
5/24/13 4:16:59.885 PM WindowServer[9204]: init_page_flip: page flip mode is on
5/24/13 4:17:00.034 PM WindowServer[9204]: mux_initialize: Couldn't find any matches
5/24/13 4:17:00.000 PM kernel[0]: /prl_hid/ Parallels HID Helper stopped.
5/24/13 4:17:00.119 PM WindowServer[9204]: GLCompositor enabled for tile size [256 x 256]
5/24/13 4:17:00.119 PM WindowServer[9204]: CGXGLInitMipMap: mip map mode is on
5/24/13 4:17:00.143 PM WindowServer[9204]: WSMachineUsesNewStyleMirroring: false
5/24/13 4:17:00.143 PM WindowServer[9204]: MPServiceForDisplayDevice: Invalid device alias (0)
5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
UUID 0x0000061000009227162a02c300000000
5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
5/24/13 4:17:00.143 PM WindowServer[9204]: Created shield window 0x4 for display 0x003f003f
5/24/13 4:17:00.144 PM WindowServer[9204]: Created shield window 0x5 for display 0x003f003e
5/24/13 4:17:00.152 PM WindowServer[9204]: Created shield window 0x6 for display 0x04248b01
5/24/13 4:17:00.152 PM WindowServer[9204]: Created shield window 0x7 for display 0x003f003c
5/24/13 4:17:00.154 PM WindowServer[9204]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
UUID 0x0000061000009227162a02c300000000
5/24/13 4:17:00.154 PM WindowServer[9204]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
5/24/13 4:17:00.154 PM WindowServer[9204]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
5/24/13 4:17:00.155 PM WindowServer[9204]: Display 0x003f003c: GL mask 0x1; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
5/24/13 4:17:00.155 PM WindowServer[9204]: CGXPerformInitialDisplayConfiguration
5/24/13 4:17:00.155 PM WindowServer[9204]: Display 0x04248b01: MappedDisplay Unit 1; Vendor 0x610 Model 0x9227 S/N 371851971 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
5/24/13 4:17:00.155 PM WindowServer[9204]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
5/24/13 4:17:00.155 PM WindowServer[9204]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
5/24/13 4:17:00.155 PM WindowServer[9204]: Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
5/24/13 4:17:00.159 PM WindowServer[9204]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, accelerator 0x0000324f, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
5/24/13 4:17:00.160 PM WindowServer[9204]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
5/24/13 4:17:00.365 PM loginwindow[9176]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
5/24/13 4:17:00.482 PM WindowServer[9204]: Created shield window 0x8 for display 0x04248b01
5/24/13 4:17:00.483 PM WindowServer[9204]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
5/24/13 4:17:00.571 PM airportd[9167]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
5/24/13 4:17:00.000 PM kernel[0]: Kext not found for unload request.
5/24/13 4:17:00.756 PM launchctl[9225]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:17:00.000 PM kernel[0]: Kext not found for unload request.
5/24/13 4:17:01.000 PM kernel[0]: Kext not found for unload request.
5/24/13 4:17:01.093 PM BezelServices 236.3[9176]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
5/24/13 4:17:01.000 PM kernel[0]: Kext not found for unload request.
5/24/13 4:17:01.837 PM com.apple.SecurityServer[25]: Session 100444 created
5/24/13 4:17:01.948 PM loginwindow[9176]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
5/24/13 4:17:02.120 PM loginwindow[9176]: USER_PROCESS: 9176 console
5/24/13 4:17:02.152 PM WindowServer[9204]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
5/24/13 4:17:02.172 PM airportd[9167]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
5/24/13 4:17:02.243 PM WindowServer[9204]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
5/24/13 4:17:02.256 PM WindowServer[9204]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
5/24/13 4:17:03.167 PM WindowServer[9204]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04248b01 device: 0x1092cba10 isBackBuffered: 1 numComp: 3 numDisp: 3
5/24/13 4:17:06.074 PM launchctl[9225]: com.apple.findmymacmessenger: Already loaded
5/24/13 4:17:09.762 PM TabletDriver[9280]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
5/24/13 4:17:09.772 PM CVMServer[84]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
5/24/13 4:17:09.849 PM launchctl[9285]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:17:09.960 PM TabletDriver[9280]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
5/24/13 4:17:10.001 PM locationd[9283]: NOTICE,Location icon should now be in state 0
5/24/13 4:17:10.100 PM CVMServer[84]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
5/24/13 4:17:10.227 PM UserEventAgent[9275]: cannot find useragent 1102
5/24/13 4:17:11.593 PM mdworker[9273]: Unable to talk to lsboxd
5/24/13 4:17:11.774 PM mdworker[9272]: Unable to talk to lsboxd
5/24/13 4:17:11.000 PM kernel[0]: Sandbox: sandboxd(9288) deny mach-lookup com.apple.coresymbolicationd
5/24/13 4:17:12.079 PM timezoned[9289]: bootstrap_look_up failed (44e)
5/24/13 4:17:12.218 PM timezoned[9289]: bootstrap_look_up failed (44e)
5/24/13 4:17:12.419 PM sandboxd[9288]: ([9273]) mdworker(9273) deny mach-lookup com.apple.ls.boxd
5/24/13 4:17:13.223 PM sandboxd[9288]: ([9272]) mdworker(9272) deny mach-lookup com.apple.ls.boxd
5/24/13 4:17:20.000 PM kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
5/24/13 4:17:37.000 PM kernel[0]: macx_swapoff SUCCESS
5/24/13 4:18:08.000 PM kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
5/24/13 4:18:22.000 PM kernel[0]: macx_swapoff SUCCESS
5/24/13 4:18:29.218 PM mds[34]: (Normal) ImportServer: Preparing for software update
5/24/13 4:18:30.483 PM mds[34]: (Normal) ImportServer: Software update complete
5/24/13 4:18:35.116 PM reboot[9323]: rebooted by _usbmuxd
5/24/13 4:18:35.116 PM reboot[9323]: BOOT_TIME: 1369426715 116379
5/24/13 4:20:15.000 PM bootlog[0]: BOOT_TIME 1369426815 0
5/24/13 4:20:43.000 PM kernel[0]: PMAP: PCID enabled
5/24/13 4:20:43.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
5/24/13 4:20:43.000 PM kernel[0]: vm_page_bootstrap: 3924376 free pages and 237160 wired pages
5/24/13 4:20:43.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
5/24/13 4:20:43.000 PM kernel[0]: zone leak detection enabled
5/24/13 4:20:43.000 PM kernel[0]: standard timeslicing quantum is 10000 us
5/24/13 4:20:43.000 PM kernel[0]: standard background quantum is 2500 us
5/24/13 4:20:43.000 PM kernel[0]: mig_table_max_displ = 74
5/24/13 4:20:43.000 PM kernel[0]: TSC Deadline Timer supported and enabled
5/24/13 4:20:43.000 PM kernel[0]: corecrypto kext started!
5/24/13 4:20:43.000 PM kernel[0]: Running kernel space in FIPS MODE
5/24/13 4:20:43.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
5/24/13 4:20:43.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
5/24/13 4:20:43.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
5/24/13 4:20:16.975 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
5/24/13 4:20:43.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
5/24/13 4:20:43.000 PM kernel[0]: calling mpo_policy_init for Sandbox
5/24/13 4:20:43.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
5/24/13 4:20:43.000 PM kernel[0]: calling mpo_policy_init for Quarantine
5/24/13 4:20:43.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
5/24/13 4:20:43.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
5/24/13 4:20:43.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
5/24/13 4:20:43.000 PM kernel[0]: MAC Framework successfully initialized
5/24/13 4:20:43.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
5/24/13 4:20:43.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
5/24/13 4:20:43.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
5/24/13 4:20:43.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
5/24/13 4:20:43.000 PM kernel[0]: [ PCI configuration begin ]
5/24/13 4:20:43.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0057
5/24/13 4:20:43.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 13:47:00 Aug 14 2012) initialization complete
5/24/13 4:20:16.975 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
5/24/13 4:20:43.000 PM kernel[0]: console relocated to 0xfd0010000
5/24/13 4:20:43.000 PM kernel[0]: PCI configuration changed (bridge=72 device=10 cardbus=0)
5/24/13 4:20:43.000 PM kernel[0]: [ PCI configuration end, bridges 22 devices 23 ]
5/24/13 4:20:29.388 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
5/24/13 4:20:43.000 PM kernel[0]: FireWire runtime power conservation disabled. (2)
5/24/13 4:20:43.000 PM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
5/24/13 4:20:43.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
5/24/13 4:20:43.000 PM kernel[0]: rooting via boot-uuid from /chosen: 674D14D9-4E9E-3C3C-836E-C2B76F083714
5/24/13 4:20:43.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
5/24/13 4:20:43.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
5/24/13 4:20:43.000 PM kernel[0]: BTCOEXIST off
5/24/13 4:20:43.000 PM kernel[0]: BRCM tunables:
5/24/13 4:20:43.000 PM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
5/24/13 4:20:43.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK5065GSXF Media/IOGUIDPartitionScheme/Customer@2
5/24/13 4:20:43.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
5/24/13 4:20:43.000 PM kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 406c8ffffe7cbff0; max speed s800.
5/24/13 4:20:43.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 PCI now active, GUID 000a270200434c07; max speed s800.
5/24/13 4:20:43.000 PM kernel[0]: Kernel is LP64
5/24/13 4:20:43.000 PM kernel[0]: USBMSC Identifier (non-unique): 57442D574341554830323532353836 0x1058 0x1100 0x175
5/24/13 4:20:43.000 PM kernel[0]: macx_swapon SUCCESS
5/24/13 4:20:36.673 PM hidd[42]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
5/24/13 4:20:36.675 PM hidd[42]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
5/24/13 4:20:43.215 PM distnoted[58]: Bug: 12D78: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
5/24/13 4:20:44.812 PM mDNSResponder[35]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
5/24/13 4:20:44.825 PM coreservicesd[59]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
5/24/13 4:20:44.837 PM appleeventsd[48]: main: Starting up
5/24/13 4:20:44.000 PM kernel[0]: Waiting for DSMOS...
5/24/13 4:20:44.000 PM kernel[0]: BCM5701Enet: Ethernet address 40:6c:8f:27:e1:64
5/24/13 4:20:44.000 PM kernel[0]: BCM5701Enet: Ethernet address 40:6c:8f:0c:63:a3
5/24/13 4:20:44.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 70:73:cb:c4:c3:99
5/24/13 4:20:44.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
5/24/13 4:20:44.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
5/24/13 4:20:46.000 PM kernel[0]: Previous Shutdown Cause: 5
5/24/13 4:20:46.000 PM kernel[0]: IOBluetoothUSBDFU::probe
5/24/13 4:20:46.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8281 FirmwareVersion - 0x0100
5/24/13 4:20:46.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
5/24/13 4:20:46.229 PM com.apple.kextd[12]: Can't load /System/Library/Extensions/SeratoScratchDriver.kext - no code for running kernel's architecture.
5/24/13 4:20:46.232 PM com.apple.kextd[12]: Load com.serato.usb.kext failed; removing personalities from kernel.
5/24/13 4:20:46.270 PM com.apple.kextd[12]: Can't load /System/Library/Extensions/SeratoScratchDriver.kext - no code for running kernel's architecture.
5/24/13 4:20:46.271 PM com.apple.kextd[12]: Load com.serato.usb.kext failed; removing personalities from kernel.
5/24/13 4:20:46.000 PM kernel[0]: DSMOS has arrived
5/24/13 4:20:46.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
5/24/13 4:20:46.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
5/24/13 4:20:46.000 PM kernel[0]: AMDTurksGraphicsAccelerator: ** Device in slot: SLOT--1 **
5/24/13 4:20:46.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
5/24/13 4:20:47.416 PM com.apple.SecurityServer[25]: Session 100000 created
5/24/13 4:20:48.279 PM configd[50]: setting hostname to "Jacquelines-Mac-mini.local"
5/24/13 4:20:48.000 PM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
5/24/13 4:20:48.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
5/24/13 4:20:48.284 PM configd[50]: network changed.
5/24/13 4:20:48.297 PM airportd[81]: _processDLILEvent: en1 attached (up)
5/24/13 4:20:48.000 PM kernel[0]: createVirtIf(): ifRole = 1
5/24/13 4:20:48.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
5/24/13 4:20:48.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff80448bf400
5/24/13 4:20:48.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
5/24/13 4:20:48.000 PM kernel[0]: Created virtif 0xffffff80448bf400 p2p0
5/24/13 4:20:49.673 PM mds[34]: (Normal) FMW: FMW 0 0
5/24/13 4:20:49.725 PM blued[52]: Read the UHE Info
5/24/13 4:20:49.725 PM blued[52]: Read version 2 info. Number of devices:3
5/24/13 4:20:49.725 PM blued[52]: Class of device: 0x2580
5/24/13 4:20:49.725 PM blued[52]: Device name: 'Jacqueline's mouse' length:19
5/24/13 4:20:49.725 PM blued[52]: Finished reading the HID data
5/24/13 4:20:49.726 PM blued[52]: Found a device with PID:0x030d VID:0x05ac
5/24/13 4:20:49.726 PM blued[52]: Class of device: 0x2540
5/24/13 4:20:49.727 PM blued[52]: Device name: 'Jacqueline's Keyboard' length:22
5/24/13 4:20:49.727 PM blued[52]: Finished reading the HID data
5/24/13 4:20:49.727 PM blued[52]: Found a device with PID:0x0255 VID:0x05ac
5/24/13 4:20:49.727 PM blued[52]: Class of device: 0x2594
5/24/13 4:20:49.727 PM blued[52]: Device name: 'Jacqueline's trackpad' length:22
5/24/13 4:20:49.727 PM blued[52]: Finished reading the HID data
5/24/13 4:20:49.727 PM blued[52]: Found a device with PID:0x030e VID:0x05ac
5/24/13 4:20:56.741 PM com.apple.SecurityServer[25]: Entering service
5/24/13 4:20:56.775 PM systemkeychain[71]: done file: /var/run/systemkeychaincheck.done
5/24/13 4:20:56.794 PM configd[50]: network changed: DNS*
5/24/13 4:20:56.795 PM mDNSResponder[35]: D2D_IPC: Loaded
5/24/13 4:20:56.795 PM mDNSResponder[35]: D2DInitialize succeeded
5/24/13 4:20:56.828 PM loginwindow[38]: Login Window Application Started
5/24/13 4:20:56.874 PM WindowServer[93]: Server is starting up
5/24/13 4:20:56.878 PM WindowServer[93]: Session 256 retained (2 references)
5/24/13 4:20:56.878 PM WindowServer[93]: Session 256 released (1 references)
5/24/13 4:20:56.889 PM awacsd[53]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
5/24/13 4:20:56.893 PM awacsd[53]: InnerStore CopyAllZones: no info in Dynamic Store
5/24/13 4:20:56.898 PM WindowServer[93]: Session 256 retained (2 references)
5/24/13 4:20:56.902 PM WindowServer[93]: init_page_flip: page flip mode is on
5/24/13 4:20:56.941 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
5/24/13 4:20:56.993 PM netbiosd[80]: Unable to start NetBIOS name service:
5/24/13 4:20:57.322 PM WindowServer[93]: mux_initialize: Couldn't find any matches
5/24/13 4:20:57.334 PM WindowServer[93]: GLCompositor enabled for tile size [256 x 256]
5/24/13 4:20:57.334 PM WindowServer[93]: CGXGLInitMipMap: mip map mode is on
5/24/13 4:20:57.358 PM WindowServer[93]: WSMachineUsesNewStyleMirroring: false
5/24/13 4:20:57.358 PM WindowServer[93]: MPServiceForDisplayDevice: Invalid device alias (0)
5/24/13 4:20:57.358 PM WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
5/24/13 4:20:57.358 PM WindowServer[93]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
5/24/13 4:20:57.359 PM WindowServer[93]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
UUID 0x0000061000009227162a02c300000000
5/24/13 4:20:57.359 PM WindowServer[93]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
5/24/13 4:20:57.359 PM WindowServer[93]: Created shield window 0x5 for display 0x003f003f
5/24/13 4:20:57.359 PM WindowServer[93]: Created shield window 0x6 for display 0x003f003e
5/24/13 4:20:57.365 PM WindowServer[93]: Created shield window 0x7 for display 0x04248b01
5/24/13 4:20:57.366 PM WindowServer[93]: Created shield window 0x8 for display 0x003f003c
5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
UUID 0x0000061000009227162a02c300000000
5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003c: GL mask 0x1; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
5/24/13 4:20:57.367 PM WindowServer[93]: CGXPerformInitialDisplayConfiguration
5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; Vendor 0x610 Model 0x9227 S/N 371851971 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
5/24/13 4:20:57.368 PM WindowServer[93]: Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
5/24/13 4:20:57.392 PM WindowServer[93]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, accelerator 0x0000334f, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
5/24/13 4:20:57.393 PM WindowServer[93]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
5/24/13 4:20:57.396 PM loginwindow[38]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
5/24/13 4:20:57.397 PM launchctl[97]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:20:57.000 PM kernel[0]: en1: 802.11d country code set to 'US'.
5/24/13 4:20:57.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
5/24/13 4:20:57.000 PM kernel[0]: MacAuthEvent en1 Auth result for: 28:37:37:48:08:f1 MAC AUTH succeeded
5/24/13 4:20:57.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
5/24/13 4:20:57.000 PM kernel[0]: AirPort: Link Up on en1
5/24/13 4:20:57.000 PM kernel[0]: en1: BSSID changed to 28:37:37:48:08:f1
5/24/13 4:20:57.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
5/24/13 4:20:58.000 PM kernel[0]: AirPort: RSN handshake complete on en1
5/24/13 4:20:58.525 PM digest-service[104]: label: default
5/24/13 4:20:58.525 PM digest-service[104]: dbname: od:/Local/Default
5/24/13 4:20:58.525 PM digest-service[104]: mkey_file: /var/db/krb5kdc/m-key
5/24/13 4:20:58.525 PM digest-service[104]: acl_file: /var/db/krb5kdc/kadmind.acl
5/24/13 4:20:58.527 PM digest-service[104]: digest-request: uid=0
5/24/13 4:20:58.549 PM rpcsvchost[106]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
5/24/13 4:20:58.553 PM digest-service[104]: digest-request: init request
5/24/13 4:20:58.556 PM digest-service[104]: digest-request: init return domain: BUILTIN server: JACQUELINES-MAC-MINI
5/24/13 4:20:58.827 PM com.apple.usbmuxd[19]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
5/24/13 4:20:59.366 PM WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
5/24/13 4:21:00.046 PM locationd[39]: NOTICE,Location icon should now be in state 0
5/24/13 4:21:00.396 PM WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04248b01 device: 0x10ed76a10 isBackBuffered: 1 numComp: 3 numDisp: 3
5/24/13 4:21:07.824 PM airportd[81]: _doAutoJoin: Already associated to “[REDACTED]”. Bailing on auto-join.
5/24/13 4:21:07.848 PM airportd[81]: _doAutoJoin: Already associated to “[REDACTED]”. Bailing on auto-join.
5/24/13 4:21:11.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
5/24/13 4:21:11.896 PM awacsd[53]: Exiting
5/24/13 4:21:12.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
5/24/13 4:21:12.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
5/24/13 4:21:12.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
5/24/13 4:21:16.000 PM kernel[0]: AmbrosiaAudioSupport: newUserClient connection attempt.
5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][waitForHandshake][28-37-37-35-c5-f5] Timeout waiting for handshake
5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] final device setup failed
5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] Forcing closeDownServices
5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][sendData][28-37-37-35-c5-f5] commandSleep in sendData returned an error
5/24/13 4:21:23.924 PM configd[50]: subnet_route: write routing socket failed, Network is unreachable
5/24/13 4:21:25.534 PM configd[50]: network changed: v4(en1+:XXX.XXX.XXX.XXX) DNS* Proxy+ SMB
5/24/13 4:21:28.096 PM UserEventAgent[11]: Captive: en1: Not probing '[REDACTED]' (protected network)
5/24/13 4:21:28.099 PM configd[50]: network changed: v4(en1:XXX.XXX.XXX.XXX) DNS Proxy SMB
5/24/13 4:21:30.730 PM _cvmsroot[124]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
5/24/13 4:21:31.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][sendData][28-37-37-35-c5-f5] Became inactive while sending data
5/24/13 4:21:31.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][setReportWL][28-37-37-35-c5-f5] Could not send DATA command via interrupt channel - 0xE00002D7
5/24/13 4:21:33.578 PM _cvmsroot[128]: Unable to resolve hostname(s)
5/24/13 4:21:33.765 PM ntpd[102]: proto: precision = 1.000 usec
5/24/13 4:21:34.179 PM WindowServer[93]: Created shield window 0x9 for display 0x04248b01
5/24/13 4:21:34.179 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
5/24/13 4:21:34.201 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
5/24/13 4:21:34.863 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
5/24/13 4:21:34.868 PM launchctl[131]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:21:34.886 PM launchctl[131]: com.apple.findmymacmessenger: Already loaded
5/24/13 4:21:34.914 PM com.apple.SecurityServer[25]: Session 100003 created
5/24/13 4:21:35.196 PM airportd[81]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
5/24/13 4:21:35.626 PM loginwindow[38]: Login Window Started Security Agent
5/24/13 4:21:35.774 PM SecurityAgent[141]: This is the first run
5/24/13 4:21:35.775 PM SecurityAgent[141]: MacBuddy was run = 0
5/24/13 4:21:36.144 PM launchctl[148]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:21:36.487 PM TabletDriver[137]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
5/24/13 4:21:36.607 PM TabletDriver[137]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
5/24/13 4:21:36.687 PM locationd[156]: NOTICE,Location icon should now be in state 0
5/24/13 4:21:36.691 PM UserEventAgent[132]: cannot find useragent 1102
5/24/13 4:21:39.137 PM timezoned[160]: bootstrap_look_up failed (44e)
5/24/13 4:21:39.342 PM timezoned[160]: bootstrap_look_up failed (44e)
5/24/13 4:21:42.000 PM kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0406] (Disconnect) -- Send request failed (err = 0x0010 (kBluetoothHCIErrorHostTimeout))
5/24/13 4:21:42.000 PM kernel[0]: ### ERROR: send request failed (err=0x0010 (kBluetoothHCIErrorHostTimeout))
5/24/13 4:21:44.107 PM configd[50]: network changed: v4(en1!:10.0.1.39) DNS+ Proxy SMB
5/24/13 4:21:44.120 PM UserEventAgent[11]: Captive: en1: Not probing '[REDACTED]' (protected network)
5/24/13 4:21:45.696 PM com.apple.launchd[1]: (com.apple.xprotectupdater[17]) Exited with code: 252
5/24/13 4:22:15.683 PM launchctl[164]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:22:15.794 PM distnoted[166]: # distnote server agent absolute time: 121.114577396 civil time: Fri May 24 16:22:15 2013 pid: 166 uid: 502 root: no
5/24/13 4:22:34.512 PM launchctl[173]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:22:37.019 PM com.apple.SecurityServer[25]: Session 100005 created
5/24/13 4:22:37.064 PM com.apple.SecurityServer[25]: Session 100006 created
5/24/13 4:22:44.199 PM BezelServices 236.3[38]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
5/24/13 4:22:48.261 PM mdworker32[170]: CGSGetDisplayBounds: Invalid display 0x00000000
5/24/13 4:22:49.134 PM mdworker32[170]: bootstrap_look_up2 failed with 0x44c
5/24/13 4:22:49.000 PM kernel[0]: Sandbox: sandboxd(178) deny mach-lookup com.apple.coresymbolicationd
5/24/13 4:22:49.731 PM SecurityAgent[141]: User info context values set for [COMPUTERNAME]
5/24/13 4:22:50.910 PM SecurityAgent[141]: Login Window login proceeding
5/24/13 4:22:51.272 PM loginwindow[38]: Login Window - Returned from Security Agent
5/24/13 4:22:51.310 PM loginwindow[38]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
5/24/13 4:22:51.328 PM loginwindow[38]: USER_PROCESS: 38 console
5/24/13 4:22:51.472 PM airportd[180]: _doAutoJoin: Already associated to “[REDACTED]”. Bailing on auto-join.
5/24/13 4:22:51.586 PM com.apple.launchd[1]: ([0x0-0x6006].com.wacom.Consumer_TouchDriver[147]) Exited with code: 255
5/24/13 4:22:51.588 PM coreservicesd[59]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=107
5/24/13 4:22:51.590 PM com.apple.launchd[1]: (com.wacom.pentablet[137]) Exited with code: 255
5/24/13 4:22:51.624 PM launchctl[181]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:22:51.640 PM com.apple.launchd.peruser.502[163]: (com.apple.gamed) Ignored this key: UserName
5/24/13 4:22:51.640 PM com.apple.launchd.peruser.502[163]: (com.apple.gamed) Ignored this key: GroupName
5/24/13 4:22:51.640 PM com.apple.launchd.peruser.502[163]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
5/24/13 4:22:51.645 PM loginwindow[38]: Connection with distnoted server was invalidated
5/24/13 4:22:52.074 PM WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
5/24/13 4:22:52.486 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
5/24/13 4:22:52.603 PM blued[52]: kBTXPCUpdateUserPreferences gConsoleUserUID = 502
5/24/13 4:22:52.895 PM com.apple.launchd.peruser.502[163]: (com.apple.afpstat-qfa[213]) Exited with code: 2
5/24/13 4:22:52.959 PM launchctl[201]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:22:54.150 PM WindowServer[93]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
5/24/13 4:22:54.210 PM WindowServer[93]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.06 seconds (server forcibly re-enabled them after 1.00 seconds)
5/24/13 4:22:55.096 PM com.apple.launchd.peruser.502[163]: (com.apple.mrt.uiagent[203]) Exited with code: 255
5/24/13 4:22:55.108 PM NetworkBrowserAgent[235]: Starting NetworkBrowserAgent
5/24/13 4:22:55.441 PM PenTabletDriver[214]: Could not find image named 'DKTouchRingToggleLeft'.
5/24/13 4:22:55.443 PM PenTabletDriver[214]: Could not find image named 'DKTouchRingToggleRight'.
5/24/13 4:22:55.460 PM 1PasswordAgent[215]: Starting 1PasswordAgent 3.8.21 #32009 built Apr 24 2013 16:09:31
5/24/13 4:22:55.677 PM 1PasswordAgent[215]: Trying to load Localizable.strings [English] from the main bundle
5/24/13 4:22:55.857 PM 1PasswordAgent[215]: Cannot find English version, using English localization for Localizable.strings
5/24/13 4:22:57.107 PM 1PasswordAgent[215]: reloadAllObjects
5/24/13 4:22:58.073 PM 1PasswordAgent[215]: Database (AGHtmlDatabase:file://localhost/Users/Winter/Dropbox/1PasswordSync/1Password.a gilekeychain/) load time [Cache]: 0.959+0.006 (2296 objects)
5/24/13 4:23:00.049 PM ConsumerTouchDriver[241]: Could not find image named 'TouchRingToggleLEDSlitOff'.
5/24/13 4:23:00.060 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleLeft'.
5/24/13 4:23:00.067 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleRight'.
5/24/13 4:23:00.890 PM apsd[219]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
5/24/13 4:23:01.720 PM TabletDriver[214]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
5/24/13 4:23:02.398 PM coreservicesd[59]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationLaunch to notificationID=140
5/24/13 4:23:03.753 PM TabletDriver[214]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
5/24/13 4:23:10.413 PM 1PasswordAgent[215]: GrowlApplicationBridgeRegistrationAttempt: Could not send open-document event to register this application with Growl because AESend returned -600/no eligible process with specified descriptor
5/24/13 4:23:10.413 PM 1PasswordAgent[215]: Failed all attempts at registering
5/24/13 4:23:11.507 PM CoreServicesUIAgent[256]: Error: qtn_file_apply_to_path error: Permission denied
5/24/13 4:23:16.700 PM storeagent[252]: CKSoftwareMap: waitUntilMapIsLoadedAndPerformBlock:onDispatchQueue: timed out waiting for mdSemaphore
5/24/13 4:23:24.378 PM com.apple.dock.extra[298]: Could not load bundle for Dock Extra key DockTile.docktileplugin
5/24/13 4:23:24.379 PM Dock[190]: Failed to set up extra plugin. file://localhost/Applications/Calendar%20Plus.app/ Failed to get plugin class.
5/24/13 4:23:25.000 PM kernel[0]: Sandbox: sandboxd(311) deny mach-lookup com.apple.coresymbolicationd
5/24/13 4:23:26.097 PM launchctl[317]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
5/24/13 4:23:26.791 PM quicklookd[282]: [QL] Can't get plugin bundle info at XTUM/ -- file://localhost/private/tmp/
5/24/13 4:23:27.006 PM Delibar[251]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
5/24/13 4:23:27.851 PM mdworker[171]: Unable to talk to lsboxd
5/24/13 4:23:29.000 PM kernel[0]: fsevents: watcher dbfseventsd (pid: 322) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
5/24/13 4:23:29.433 PM mdworker[174]: Unable to talk to lsboxd
5/24/13 4:23:36.028 PM Finder[192]: [QL] Can't get plugin bundle info at XTUM/ -- file://localhost/
5/24/13 4:23:38.110 PM MenuTab Pro for Facebook[347]: objc[347]: Class HandCursorButton is implemented in both /Applications/MenuTab Pro for Facebook.app/Contents/Frameworks/FIPLABNewsletter.framework/Versions/A/FIPLABNe wsletter and /Applications/MenuTab Pro for Facebook.app/Contents/MacOS/MenuTab Pro for Facebook. One of the two will be used. Which one is undefined.
5/24/13 4:23:38.124 PM Tab for Google+ Pro[346]: objc[346]: Class HandCursorButton is implemented in both /Applications/Tab for Google+ Pro.app/Contents/Frameworks/FIPLABNewsletter.framework/Versions/A/FIPLABNewslet ter and /Applications/Tab for Google+ Pro.app/Contents/MacOS/Tab for Google+ Pro. One of the two will be used. Which one is undefined.
5/24/13 4:23:38.486 PM com.apple.SecurityServer[25]: Session 100012 created
5/24/13 4:23:39.707 PM Pin Pro for Pinterest[348]: objc[348]: Class HandCursorButton is implemented in both /Applications/Pin Pro for Pinterest.app/Contents/Frameworks/FIPLABNewsletter.framework/Versions/A/FIPLABN ewsletter and /Applications/Pin Pro for Pinterest.app/Contents/MacOS/Pin Pro for Pinterest. One of the two will be used. Which one is undefined.
5/24/13 4:23:46.417 PM Mint QuickView[344]: Could not find image named 'accounts'.
5/24/13 4:23:47.947 PM usernoted[197]: Connection does not have the proper entitlement (com.apple.developer.notificationcenter-identifiers) to connect on behalf of com.apple.sociald.twitterservice.Twitter. All communication will be denied.
5/24/13 4:23:49.075 PM librariand[342]: MMe quota status changed: under quota
5/24/13 4:24:06.102 PM Alfred 2[264]: [TIMER] 59.030677 seconds to initialise Alfred
5/24/13 4:24:20.647 PM WindowServer[93]: CGXDisableUpdate: UI updates were forcibly disabled by application "Alfred 2" for over 1.00 seconds. Server has re-enabled them.
5/24/13 4:24:20.781 PM WindowServer[93]: reenable_update_for_connection: UI updates were finally reenabled by application "Alfred 2" after 1.15 seconds (server forcibly re-enabled them after 1.00 seconds)
5/24/13 4:24:32.998 PM prl_naptd[431]: Starting Parallels Network Daemon (proxy_mode)
5/24/13 4:24:33.282 PM Parallels[451]: Set 'root:wheel' as owners for /Applications/Parallels Desktop.app/Contents//Library/Extensions/10.6
5/24/13 4:24:33.591 PM Parallels[460]: Starting Parallels Dispatcher Service
5/24/13 4:24:33.597 PM Parallels[464]: Parallels Dispatcher Service sucessfully started
5/24/13 4:24:33.664 PM Parallels[467]: Loading kernel extension prl_usb_connect.kext
5/24/13 4:24:35.496 PM Parallels[473]: Loading kernel extension prl_hypervisor.kext
5/24/13 4:24:39.025 PM Parallels[482]: Loading kernel extension prl_hid_hook.kext
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtx.c:186 CPU is Intel
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypLowCache.c:201 Low cache initialized (0 kB for 0 VMs on 16384 MB)
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypApic.c:253 Host APIC base_msr 0xFEE00800 ver 0x15
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtd.c:3975 [vtdInit]
5/24/13 4:24:39.000 PM kernel[0]: /drv/ MacACPI.cpp:40 ACPI table DMAR is not found
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:160 map: addr = 0xf0e0, size = 1024
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:111 [acpiScanForRsdp] RSDP NOT found!
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:111 [acpiScanForRsdp] RSDP NOT found!
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:213 [acpiFindRootTablePointer] Can't find RSDP!
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:309 [_acpiFindTableBySig] Not found root table!
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtd.c:3720 [vtdProcessDmarTable] Can't find DMAR table!
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtd.c:4014 [vtdInit] No VT-d hardware
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypModule.c:174 Parallels IPI vector 0x47 shared 0
5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypModule.c:185 Parallels Hypervisor 8.0.18483.860857 loaded.
5/24/13 4:24:39.402 PM Parallels[488]: Loading kernel extension prl_netbridge.kext
5/24/13 4:24:39.000 PM kernel[0]: /prl_hid/ Parallels HID Helper started.
5/24/13 4:24:39.905 PM Parallels[494]: Loading kernel extension prl_vnic.kext
5/24/13 4:24:40.000 PM kernel[0]: com.parallels.kext.prlnet 8.0.18483.860857 has started.
5/24/13 4:24:40.666 PM Parallels[499]: Trying to load kernel extensions, exit status: 0
5/24/13 4:24:40.000 PM kernel[0]: com.parallels.kext.vnic 8.0.18483.860857 has started.
5/24/13 4:24:40.672 PM Parallels[502]: Starting Parallels networking...
5/24/13 4:24:41.000 PM kernel[0]: com_parallels_kext_prl_vnic: created vnic0
5/24/13 4:24:41.000 PM kernel[0]: com_parallels_kext_prl_vnic: created vnic1
5/24/13 4:24:41.501 PM Parallels[509]: Parallels networking sucessfully started
5/24/13 4:24:41.512 PM Parallels[511]: Restarting CiscoVPN
5/24/13 4:24:41.565 PM SystemStarter[513]: Unknown service: CiscoVPN
5/24/13 4:24:41.648 PM watchdog[525]: Start watching /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd (limit is 20)
5/24/13 4:24:41.655 PM watchdog[531]: Start /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd start
5/24/13 4:24:41.659 PM watchdog[533]: Child pid 532
5/24/13 4:24:41.676 PM prl_naptd[532]: Starting Parallels Network Daemon
5/24/13 4:24:41.758 PM prl_naptd[532]: vnic0: DHCP/NAT for XX.XXX.XX.1-10.XXX.XX.XXX netmask 255.255.255.0
5/24/13 4:24:41.758 PM prl_naptd[532]: vnic1: DHCP for XX.XX.XXX.1-XX.XX.XXX.XXX netmask 255.255.255.0
5/24/13 4:24:42.000 PM kernel[0]: vnic0: promiscuous mode enable failed
5/24/13 4:24:42.000 PM kernel[0]: vnic1: promiscuous mode enable failed
5/24/13 4:24:42.000 PM kernel[0]: /drv/ HypIoctls.c:608 Ioctl VT-d status: FFFFFFFD
5/24/13 4:24:45.518 PM mDNSResponderHelper[536]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
5/24/13 4:24:45.518 PM mDNSResponderHelper[536]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argumentMy apologies about the wall of text. After I made my original post, I thought maybe it would better to go back and put it in a pastebin instead. I was not able to edit that post once I sent it.
In regards to your question, the permissions on the
/Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist file is "read and write" for system, wheel and everyone. -
itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adamitunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam -
Troubleshooting InTune, SCCM, and Windows 8.1 Phones
Howdy...
I've setup various components but when I use my Windows 8.1 Samsung phone "Workplace Account" feature, the phone gets stuck on "We're looking for your settings...", it will stay on this for 15+mins if I let it.
What can I do for further troubleshooting?
Here are my components used:
InTune Trail Subscription
Verified to use my public domain via the custom TXT DNS record
UPN settings configured (UPN = public email format = [email protected])
Single Sign On into InTune admin console and user portal configured via ADFS
Logon tests from a PC are successful internally and externally into the admin console and user portal
Used DirSync on Win2012r2 to sync my AD to the Azure cloud - works fine
ADFS servers (and DirSync) on 2012r2
ADFS Web Application Servers on 2012r2
System Center Configuration Manager has Intune Subscription configured
System Center Configuration Manager ha the trail certificate, InTunes role installed, and distro.point set to manage.microsoft.com, and trail apps that came with trail certificate
...note sure if I've forgotten anything - definitely not the easiest thing to get working!!
I've also done a packet capture from the firewall - they (firewall company) have ruled out their device as the problem.
I've been using a few URLs to help,
this is one of themThe Microsoft Intune team has confirmed this was an issue. The temp solution was to disable a checkbox in my ADFS server... In a few weeks I will call back on my ticket and see if there is a better solution, otherwise this is the only thing I
could do.
ADFS Server > ADFS Console > Authentication Policies
Global Settings > Edit
Primary Tab > Uncheck "Enable Device Authentication"
Microsoft Tech Support Comment:
I am confirming the only known solution, which is a short term workaround being suggested by the PG/engineering, which is to Disable device auth properties check box on ADFS side.
The long term solution is already well underway and in testing by the Product team and should be released in the upcoming weeks.
Public facing documentation for this issue should be available soon but we do not have a specific date. -
My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
Colin HansenTry downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows -
Steps to troubleshoot and get past common problems with Audition
When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
* "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
OS X: launch /Applications/Utilities/Console.app Clear the view, then launch Audition and note any error messages that appear.
Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!
-
Troubleshoot installation problems in Photoshop Lightroom on Windows Vista
This document can help you to resolve system errors that occur while you use Adobe Photoshop Lightroom on Windows Vista. System errors can manifest in many different ways, including (but not limited to) the following:
A blank or flickering dialog box
A frozen cursor or screen
A blue screen
An unexpected restart
An error message such as:
"Setup is unable to load the installation script file."
"Unable to create a directory under C:\Windows\System. Please check write-access to the directory."
"Uninstalling: C:\Program Files\Adobe\Adobe Photoshop Lightroom refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
Note: If you attempt to install Photoshop Lightroom to a drive that doesn't have the minimum required space available, the installation will fail. You must then completely reinstall to another location that has sufficient free space.
Many different factors can cause system errors, including conflicts among device drivers, applications, operating system settings, hardware, and corrupt elements in specific files. Although a system error may occur only when you work with Photoshop Lightroom, Photoshop Lightroom may not necessarily be the cause; it may be the only application that uses enough memory or processor cycles to expose the problem.
To benefit most from this document, perform the tasks in order. Keep track of the tasks that you perform and the results of each, including errors and other problems. Adobe Technical Support can use this information to better assist you if you need to call.
You must be logged on as an administrator to perform some of the procedures in this document.
Important: Some of the procedures in this document may initiate a User Access Control dialog that asks for your permission to continue. Read the details in the dialog to determine if you want to continue. If you choose to cancel the dialog, then you will not be able to continue with that troubleshooting step.
The steps in this document that refer to the Control Panel are in reference to the Classic view. For information on switching the Control Panel to the Classic view and many other common OS procedures, see Common Microsoft Windows Vista procedures (TechNote kb401275)
Some of these procedures require you to locate hidden files and hidden folders. Some procedures require you to locate files by their full file names, which include extensions (for example, example_filename.ini). By default, Windows Explorer doesn't show hidden files, hidden folders, and file name extensions that it recognizes.
To show hidden files, hidden folders, and all file name extensions in Windows Explorer:
In Windows Explorer, choose Organize > Folder And Search Options.
Click the View tab in the Folder Options dialog box.
In Advanced Settings, select Show Hidden Files And Folders.
Deselect Hide Extensions For Known File Types.
Click OK.
Note: The procedures in this document are based on the default interface of Windows Vista. If the interface is customized, some procedures may vary. For example, a commonly encountered difference is the navigation to Control Panel from the Start menu: You may navigate Start > Settings > Control Panel instead of Start > Control Panel. Additionally, the procedures in this document assume you are using the Classic View of the Control Panel: To view the Control Panel in the Classic View, click Switch To Classic View on the Control Panel navigation bar on the left side of the window.
Beginning troubleshooting
The tasks in this section can help you resolve the most common system errors. Before performing any of these tasks, back up all personal files (for example, Photoshop Lightroom files you created). Always restart the computer after a system error occurs to refresh system memory. Continuing to work without restarting the computer may compound the problem.
1.Make sure that the system meets the minimum requirements for PhotoshopLightroom.
Photoshop Lightroom may not run correctly on a system that doesn't meet the following requirements:
Intel Pentium 4 or equivalent processor
Microsoft Windows XP, Windows Vista, Windows 7
768 MB of RAM (1 GB recommended)
1 GB of available hard-disk space
CD-ROM drive
In addition to these requirements, a video card that supports 24-bit (16 million) or more colors, and a resolution of 1024 x 768 or higher, is recommended.
* Photoshop Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until Adobe fully certifies Photoshop Lightroom for use on Windows Vista.
To check basic system information, such as processor speed and how much RAM is installed, choose Start > Control Panel > System.
2. Delete previously installed application files, especially if you had the public beta version of Photoshop Lightroom installed.
To delete files from a previous Adobe Photoshop Lightroom installation attempt:
Choose Start > Control Panels > Add or Remove Programs.
Select Adobe Photoshop Lightroom and choose to remove it.
Close the Add Or Remove Programs window and the Control Panel.
Open Windows Explorer.
If the Lightroom.exe file is still in the Program Files\Adobe\Adobe Photoshop Lightroom folder, delete it.
If the Lightroom Preferences.agprefs file is still in the Documents and Settings/[username]/Application Data/Adobe/Lightroom/Preferences folder, delete it.
Empty the Recycle Bin.
Try to reinstall. If you cannot, continue with the next two sections in this step:
Move all the folders under the Users/[username]/AppData/Roaming/Adobe/Lightroom folder into a new folder on the desktop; name the folder Lightroom Presets. These are the presets that were installed with the application and that you created.
Move all the folders under the Users/[username]/Pictures/Lightroom/Lightroom Previews.lrdata folder into a new folder on the desktop; name the folder Lightroom Previews. If you have a large number of images, you can move this folder back to its original location before you open Photoshop Lightroom, once it's installed. Or you can delete this folders to re-create it when Photoshop Lightroom opens. If there are further problems with Photoshop Lightroom after it's installed, it might be due to corruption in the previews, in which case you need to delete this folder and re-create it.
Try to reinstall.Important: Do not delete the Lightroom Database.lrdb file!
If there are further problems with Photoshop Lightroom after it's installed, these issues may be due to corruption in the preset files you created, in which case you need to remove them and re-create them, or test each preset individually.
Note: If you can reinstall, and if this is not the first time you opened Photoshop Lightroom, then Photoshop Lightroom will look for a library database file. If it does not find a library in the expected location, it will prompt you to create a new library, locate the library, or exit. Exit will close the dialog box, and Photoshop Lightroom will not open. Although you can tell Photoshop Lightroom to locate your library, it's best to put it back in the default location and then open the application.
If you can reinstall, close Photoshop Lightroom and then copy any presets you created from the Lightroom presets on the desktop back into the Users/[username]/AppData/Roaming/Adobe/Lightroom folder.
If you cannot reinstall, then move the Lightroom Database.lrdb file from the Users/[username]/Pictures/Lightroom folder into a new folder called Lightroom Database File and save this file on the desktop. This is your database, if you previously had Photoshop Lightroom installed.
Reinstall Photoshop Lightroom. If you cannot reinstall, continue with the next task in this document.
3. Log in as Administrator before installingPhotoshopLightroom.
In Windows Vista, you must be logged in with local (that is, machine) Administrator rights to install Photoshop Lightroom. If you don't have administrator rights, contact your system administrator for assistance.
4. Check the CD and CD-ROM drive.
Dust or dirt on a CD can interfere with an installation and prevent the CD-ROM drive from recognizing the CD. Examine the Photoshop Lightroom CD for dirt, dust, or fingerprints. Gently wipe the bottom of the CD from the center outward with a soft, lint-free cloth.
Verify that the CD-ROM drive can read other CDs. If it can't, examine the CD caddy or loading tray for dirt, and clean it with a lint-free cloth. If it still can't read other CDs, contact the CD-ROM drive manufacturer or the computer manufacturer.
5. Install current Windows service packs and other updates.
Updates to the Windows operating system improve its performance and compatibility with applications. You can obtain Windows service packs and other updates from the Microsoft website at www.windowsupdate.com. For assistance installing service packs and other updates, contact Microsoft technical support.
Important: Before you install a system update, check the system requirements for Photoshop Lightroom (and any third-party software or hardware you may use with Photoshop Lightroom ) to ensure compatibility. If the update isn't listed, then contact Adobe or the manufacturer of your third-party software or hardware.
6. InstallPhotoshopLightroomfrom the desktop and use the default installation folder.
Some system components such as device drivers and virus protection utilities can conflict with the Photoshop Lightroom installer and result in an incomplete or failed installation, or they can cause problems when you install to a folder or when you use a path to the default installation folder that contains a special character, such as #. To prevent these conflicts, install Photoshop Lightroom from the desktop, and use the default folder name and path.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
7.Re-create thePhotoshopLightroompreferences file.
Re-create the Photoshop Lightroom preferences file to eliminate problems that a damaged preferences file might cause:
Quit Photoshop Lightroom.
Rename the Lightroom Preferences.agprefs file (for example, to Lightroom Preferences.old) in the Users/[username]/AppData/Roaming/Adobe/Lightroom/Preferences folder.
Start Photoshop Lightroom. Photoshop Lightroom creates a new preferences file.
If the problem continues, the preferences file isn't the cause. To restore custom settings, delete the new preferences file and restore the original name of the previous preferences file.
8.Install and run Photoshop Lightroom while no other applications are running.
Some applications may interfere with installing or running Photoshop Lightroom. Virus protection programs are meant to stop viruses from installing on your computer. Before installing or starting Photoshop Lightroom, disable other applications, including virus protection programs and startup items (items that start automatically with Windows).
To disable startup items and non Microsoft services:
Quit all applications.
Choose Start, type msconfig in the Search text box, and press Enter.
Write down all unselected items under the Startup and Services tabs.
Click the General tab, and choose Selective Startup.
Click the Startup tab and select Disable All.
Click the Services tab and select Hide All Microsoft Services.
Select Disable All then re-select FLEXnet Licensing Service. If you are unsure whether an item is essential, then leave it deselected (disabled).
Click Apply, and restart Windows for the changes to take effect.
Note: Upon restart, you'll be notified that the System Configuration utility has made changes to the way that Windows starts up. Click OK. When the System Configuration utility appears, click Cancel.
Right-click icons in the Notification Area and close or disable any startup items that are still active.
9. Install Photoshop Lightroom to a different hard disk after disabling startup items and installing from the hard disk.
Hard disk problems can prevent Photoshop Lightroom from installing correctly. By installing Photoshop Lightroom to a different physical hard disk, you can verify if the original hard disk is preventing installation. First, completely remove Photoshop Lightroom from the hard disk.
To install Photoshop Lightroom to a different hard disk after disabling startup items:
Follow the steps in task 8 above to disable startup items.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
Click Change and select a different hard disk in the Change Current Destination Folder window. Click OK, and then follow the on-screen instructions.
Intermediate troubleshooting
If the tasks in the previous section don't solve the problem, try the following intermediate troubleshooting tasks.
10. Install and run Photoshop Lightroom in a new user account.
Create a new user account that has the same permissions as the account that you use when the problem occurs. If the problem doesn't recur, the original user account may be damaged. For instructions on creating a new user account, see To add a new user to the computer in Windows Help or contact your system administrator.
11. Optimize handling of temporary files by Windows Vista.
Windows and applications store working data in temporary (.tmp) files that they create on the hard disk. Excessive or outdated temporary files can interfere with performance of Windows or applications.
Delete temporary files by using the Disk Cleanup utility included with Windows or by using the following instructions. Make sure that at least 1 GB of free space is available on the hard disk to which temporary files are written. To start Disk Cleanup, choose Start > All Programs > Accessories > System Tools > Disk Cleanup. For information about Disk Cleanup, see Windows Help.
To manually delete temporary files:
Note: Windows deletes temporary files when Windows and applications close normally. However, when Windows or an application crashes, temporary files can accumulate on the hard disk. Windows may prevent you from deleting some temporary files as they may be in use. Delete as many temporary files as you possibly can, without deleting the files that are in use.
Quit all applications.
Choose Start and type %tmp% in the Search text box and press Enter.
Delete the contents of this folder.
Note the drive letter where this directory is located.
To ensure that at least 1 GB of free space is available on the hard disk to which temporary files are written:
Choose Start > My Computer.
Select the drive noted in step 4. Right click and select Properties.
Confirm the drive has at least 1 GB of free space.
12. Repair and defragment hard disks.
System errors can occur if hard disks contain damaged sectors or fragmented files. Repair and defragment hard disks, either by using the Error-checking tool and Disk Defragmenter utility included with Windows or by using a third-party disk utility. You should run such utilities on each hard disk or partition. More information about the Error-checking tool and Disk Defragmenter appears below; for more information about a third-party disk utility, refer to the documentation for the utility.
The Error-checking tool repairs bad sectors, lost allocation units and file fragments, cross-linked files, and invalid file names. To access the Error-checking tool, choose Start > Computer, right-click the desired hard disk, and choose Properties from the menu. In the Local Disk Properties dialog box, click the Tools tab, and then click Check Now in the Error-checking area.
Note: To prevent Disk Defragmenter from moving files to bad sectors of a disk, run the Error-checking tool before running Disk Defragmenter.
Disk Defragmenter rearranges the files and free space on your computer so that files are stored in contiguous units and free space is consolidated in one contiguous block. To access the Disk Defragmenter utility, choose Start > All Programs > Accessories > System Tools > Disk Defragmenter.
13. Scan the system for viruses.
Use current anti-virus software to check the system for viruses. Virus infections can damage software and cause system errors. For more information, see the documentation for the anti-virus software.
14. Try to install Photoshop Lightroomon a different computer.
Try to install Photoshop Lightroom on a different computer to determine if the problem is unique to your computer. If the problem is unique to your computer, contact the computer manufacturer; if the problem occurs on multiple computers, contact Adobe Technical Support.
Advanced Troubleshooting
If the tasks in the previous section don't resolve the problem, you may be able to resolve the problem by reinstalling Windows Vista and Photoshop Lightroom, reformatting your hard disk and reinstalling Windows Vista and Photoshop Lightroom, or by determining if hardware is conflicting with Photoshop Lightroom.
Disclaimer: Adobe doesn't support hardware and provides these procedures as a courtesy only. For further assistance, contact the hardware manufacturer or an authorized reseller. If you troubleshoot hardware problems yourself, you may void the warranty for your computer.
Note: Before you remove or rearrange hardware, turn off and disconnect power to the computer and any peripheral devices.
15. Log in using the built-in Administrator account.
The built-in Administrator account has a higher access level to the system than a normal local administrator account. By default the built-in Administrator account is disabled. For information about enabling and logging in to the built-in Administrator account, contact your system administrator. You can also refer to this support document on the Microsoft support website: http://support.microsoft.com/kb/926183/en-us?spid=11737&sid=73.
16. Reformat the hard disk, and reinstall only Windows Vista and Photoshop Lightroom.
Reformat the hard disk, and then install only Windows Vista and Photoshop Lightroom from the original installation media. Reformatting a disk erases all files it contains, so be sure to back up all personal files first. Also make sure that you have all application and system disks.
For instructions on performing a clean installation of Windows Vista, see document 918884, "How to install Windows Vista" on the Microsoft website at http://support.microsoft.com.
Note: Don't install additional software or hardware until you're sure that the problem is resolved. Don't back up the hard disk and restore Windows and Photoshop Lightroom instead of reinstalling them. If the problem is caused by an application or Windows, and either one is restored instead of reinstalled, the problem may recur.
After you reformat the hard disk and reinstall Windows and Photoshop Lightroom, try to re-create the problem:
If the problem no longer occurs, then install other applications one at a time and try to re-create the problem after each installation. If the problem occurs after an installation, then the recently installed application may be the cause.
If the problem occurs when only Windows and Photoshop Lightroom are installed, then the cause may be hardware-related, and you should contact the hardware manufacturer or an authorized reseller for assistance.
17. Check for problems with RAM modules.
Ensure that the RAM modules are installed properly and are not the cause of your problem. Do one or both of the following:
Change the order of the installed modules.
Remove all but the minimum number of modules needed to run Windows and [product], and test to see if the problem persists. If it does, replace the modules you removed and remove the others, testing again to see if the problem recurs. If it doesn't, then one or more of the removed modules are the cause. For assistance, contact the RAM manufacturer.You've tried Help>Updates from within photoshop cs6?
Or this 8.3 updater
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista -
I have been trying for 2 days now to get this resolved.
Computer hashard wired internet connection, running Windows 7 Home Premium. No other issues with downloading or uploading from any other sites or programs. No other network issues reported on other computers.
It started when I went to install Lightroom through my Creative Cloud. It prompted me to update my Creative Cloud Desktop App, which I went to do and then promptly got Error Code 201. I restarted my Creative Cloud and then skipped the update, hoping it was just an issue with that specific download. I clicked to install Lightroom and the same thing happened, Error code 201.
I restarted my machine, and tried again. Same issue.
I contacted Support. They had me go in and change a bunch of folder names to and add "old" to the end of them and then had me try using the Adobe Cleaner tool, which did not work. He had me go in and change some internet settings, still nothing. Same issues as before, only now with all the renaming of things I cannot even open programs I had previously been able to open like Photoshop.
He instructed me to reinstall the CC Desktop App because the Cleaner tool was not recognizing that it existed anymore (probably something to do with renaming files.. just saying) and now I get the 201 Error when I try to reinstall the CC Desktop App.
I ran out of time and had to stop after being on with them for over an hour.
Today I contact back and was instructed to create a new user account on my computer and try downloading and installing the application in the new user. Same errors. 213 at first, restarted my computer and then got Error Code 201 again.
I am getting really frustrated and really behind on my work. Any information someone could give me would be greatly appreciated. Currently waiting for a chat person to be available again.
Thank you for your time and assistance.Meowia for Error 201 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html. Error 213 indicates there was problem locating the update or an incorrect URL. The troubleshooting steps are still the same as both errors are related to failure of the current network connection.
-
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Photoshop CS6 GPU FAQ
Introduction
This document provides a quick reference guide to video card usage in Photoshop. Some features require a compatible video card to work; if the video card or its driver is defective or unsupported, those features will not work at all. Other features use the video card for acceleration and if the card or driver is defective those features will run more slowly.
Mercury Graphics Engine
The Mercury Graphics Engine (MGE) represents features that use video card, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
MGE is new to Photoshop CS6, and uses both the OpenGL and OpenCL frameworks. It does not use the proprietary CUDA framework from nVidia.
In order to use MGE, you must have a supported video card and updated driver. If you do not have a supported card, performance will be degraded. In most cases the acceleration is lost and the feature runs in the normal CPU mode. However, there are some features that will not work without a supported video card.
GPU features added in Photoshop CS6
Adaptive Wide Angle Filter (compatible video card required)
Liquify (accelerated by compatible video card with 512MB VRAM, GPU mode unavailable on Windows XP)
Oil Paint (compatible video card required)
Warp and Puppet Warp (accelerated by compatible video card, GPU mode unavailable on Windows XP)
Field Blur, Iris Blur, and Tilt/Shift (accelerated by compatible video
card supporting OpenCL, GPU mode unavailable on Windows XP)
Lighting Effects Gallery (compatible video card required with 512MB
VRAM, unavailable on Windows XP)
New 3D enhancements (3D features in Photoshop require a compatible video card with 512MB VRAM, unavailable on Windows XP):
Draggable Shadows
Ground plane reflections
Roughness
On-canvas UI controls
Ground plane
Liqht widgets on edge of canvas
IBL (image based light) controller
* Note that all 3D features are unavailable on Windows XP in Photoshop CS6
GPU features added in previous versions of Photoshop
Scrubby Zoom. See Zoom continuously
Heads Up Display (HUD) color picker. See Choose a color while painting
Color sampling ring. Choose colors with the Eyedropper tool
Brush dynamic resize and hardness control. See Resize or change hardness of cursors by dragging
Bristle Brush tip previews. Bristle tip shape options
Rule of thirds crop grid overlay. Crop images
Zoom enhancements. Smooth display at all zoom levels and temporary zoom. See Zoom continuouslyTemporarily zoom an image
Animated transitions for one-stop zoom.
Flick-panning.
Rotate the canvas. Use the Rotate View tool
View nonsquare pixel images. Adjust pixel aspect ratio
Pixel grid. Hide the pixel grid
Adobe Color Engine (ACE).
Draw Brush tip cursors. Resize or change hardness of cursors by dragging
Adobe Bridge GPU features
Preview panel
Full-screen preview
Review mode
See Preview and compare images in Adobe Bridge CS6 Help for information on all of these features.
GPU/OpenGL preferences in Photoshop CS6
The advantages of using a compatible video card (GPU) with Photoshop are that you can experience better performance and more features. Problems can occur if you have an older video card with limited VRAM or if you use other programs at the same time as Photoshop that use the GPU.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, make sure Use Graphics Processor is selected in GPU Settings.
Click Advanced Settings and specify the following options:
Mode > Basic
Mode > Normal
Mode > Advanced Provides the benefits of Normal mode as well as newer OpenGL advances that can result in improved performance.
Use Graphics Processor to Accelerate Computation
Use OpenCL Uses the GPU to accelerate the new blur filters (Field Blur, Iris Blur, and Tilt-Shift) – OpenCL will only be available on newer GPUs that support OpenCL v1.1 or higher
Anti-Alias Guides And Paths Allows the GPU hardware to smooth the edges of drawn guides and paths.
30 Bit Display (Windows only) Allows Photoshop to display 30 bit data directly to screen on video cards that support it
Quick GPU Troubleshooting Steps
You can experience problems such as artifacts, errors, and crashes if there are incompatibilities between Photoshop and the display components that access the GPU.
If you experience crashes, incorrectly rendered windows or objects, redraw issues, or performance issues while running Photoshop, first determine whether OpenGL is causing the problem.
Turn off OpenGL.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, uncheck Use Graphics Processor. Click OK.
Restart Photoshop, and perform the same function.
If the problem recurs while OpenGL Drawing is disabled, OpenGL is not the cause. For additional troubleshooting, see Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x (cpsid_82414).
If the problem resolves, proceed with the rest of the troubleshooting steps to fix OpenGL.
Make sure that you're using the latest update of Photoshop.Updates fix bugs and issues.
Update the display driver.Updated display drivers can fix many issues, such as crashing, incorrectly rendered objects, and performance problems. Determine what video card you have and go directly to the manufacturer's website (nVidia or ATI/AMD) and download the latest driver. (Note: Simply doing a Windows Update is does not guarantee you are using the latest driver. You must go directly to the nVideo or ATI/AMD websites to get the absolute latest driver.) After you update your driver, turn on Use Graphics Processor in Photoshop preferences.
Reset preferences.
Resetting preferences returns OpenGL settings to their default status. Reset Photoshop preferences by pressing and holding Shift+Ctrl+Alt (Windows) or Shift+Option+Command (Mac OS) immediately after you start Photoshop.
Click Yes when asked if you want to delete the Adobe Photoshop Settings File.
Retry the function that caused the problem.
Change the OpenGL mode to Basic.
Setting the OpenGL mode to Basic uses the least amount of GPU memory and the most basic GPU feature set.
Close all documents.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, click the GPU Settings Advanced Settings button.
Choose Mode > Basic
Restart Photoshop.
If this solution resolves the problem, switch to Normal mode. See if the issue recurs. If the issue recurs, return to Basic mode.
Note: If you’re changing GPU preferences to troubleshoot a problem, re-launch Photoshop after each change.
If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems with GPU accelerated or enabled features in Photoshop. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.
Check your Cache Levels setting.
If you've set your Cache Levels to 1 in Photoshop preferences, you can experience performance issues with GPU features. Reset Cache Levels to the default setting, which is 4.
Choose Edit > Preferences > Performance (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, choose Cache Levels > 4.
The GPU Sniffer
To help guard against Photoshop crashes related to bad GPU hardware or drivers, Photoshop employs a small program called the GPU Sniffer. Every time Photoshop is launched, Photoshop launches the sniffer. The sniffer runs rudimentary tests of the GPU and reports the results to Photoshop. If the sniffer crashes or reports a failure status to Photoshop, Photoshop will not use the GPU. The Use Graphics Hardware checkbox in the Performance panel of the Preferences will be unchecked and disabled.
The first time the sniffer fails, Photoshop will display a dialog indicating that it has detected a problem with the GPU. On subsequent launches the dialog will not appear unless the Photoshop preferences are reset.
If the user corrects the problem, either by replacing the video card or by updating the driver, then the sniffer will pass on the next launch and the Use Graphics Hardware checkbox will be enabled and returned to its previous state (enabled or disabled).
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. While the minimum amount of VRAM supported on video cards for Photoshop CS6 is 256MB, some features require 512MB of VRAM to be enabled.
Note: Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000
AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000
Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in CS6 – some basic GL functionality may be available for both these cards.
Note: 3Dand some Open GL features are disabled on Windows XP, as stated on : http://labs.adobe.com/technologies/photoshopcs6/I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.
-
Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"
We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look....... -
How do I troubleshoot Flash Player's protected mode for Firefox?
Starting with Flash Player 11.3, a protected mode was added as a new security enhancement for Firefox 4.0 and greater on Windows Vista and higher. This security enhancement is designed to limit the impact of attacks launched from malicious Flash content (SWF files). For additional details on this feature, please see Inside Flash Player Protected Mode for Firefox
After reviewing this FAQ, we'd appreciate if you would take a minute to let us know if it helped. There is a link to a two question survey at the bottom of the page.
While we believe this feature is fully tested and reliable, if you encounter issues with Firefox we recommend the following troubleshooting steps.
Problem: Flash content does not appear, YouTube display errors such as "An error occurred. Please try again later.", or Flash video will not function properly.
Solution: If RealPlayer is installed on your system, please disable the RealPlayer Browser Record plug-in.
Launch RealPlayer
Click the RealPlayer icon in the upper left corner of the window and choose Preferences.
Choose Download & Recording from the left hand panel
Uncheck "Enable Web Download & Recording for these installed browsers"
Click OK and close RealPlayer
Restart Firefox
If you are viewing this page in Firefox and Flash Player is not working, please click here for an HTML5 version of this video: YouTube HTML5 HD Link
Problem: RealPlayer is not installed, Flash Player crashes in Firefox
Solution:
Troubleshoot Extensions and Add-Ons by launching Firefox in Safe Mode
1. Exit Firefox
2. Click Start > Run
3. Type the following then press [Enter]:
firefox.exe -p
4. Click Continue in Safe Mode
5. Attempt to reproduce the problem
If the problem does not occur in safe mode, please try to isolate it down to an individual plug-in.
1. Exit Firefox
2. Re-launch Firefox
3. Click Firefox > Add-Ons > Extensions
4. Click Disable on all of your extensions
5. Attempt to reproduce the problem, while enabling each extension until you can reproduce the issue
If the issue persists in Safe-Mode, please continue with the steps below:
Some users have indicated that random crashing stops when clearing their Firefox profile. This step will allow you to temporarily test with a clean set of Firefox preferences, without losing your preferences.
Exit Firefox
Click Start > Run
Type the following then press [Enter]: firefox.exe -p
Click Create Profile
Click Next
In the Enter new profile name dialog, type "Test"
Click Finish
Select Test and click Start Firefox
Use Firefox as normal. If the problem goes away, clearing your Firefox preferences, or migrating the important settings (bookmarks, etc) to a clean Profile may be a good permanent solution.
If the problem persists, switch back to your old profile by doing the following:
Exit Firefox
Click Start > Run
Type the following then press [enter]:firefox.exe –p
Choose your old account (typically "default")
Click Start Firefox
Solution: Try a clean Windows profile (You must be an Administrator to complete this step. If your user account is not an admin type, skip to the next section for instructions on reporting a bug.) Creating a new Windows user will rule out any account-specific preferences that may be enabled on your system.
Create a user account in Vista
Create a user account in Windows 7
Use Flash Player normally. If the problem goes away, this indicates a compatibility problem, either with software you have installed or with preferences set on your account.
Reporting a bug:
Please file bugs at bugbase.adobe.com.
Choose "Adobe Flash Player" as the product
Choose "Browser Integration" as the product area
Please provide as much information as possible with what you were doing before the crash and an exact URL where the crash occurred.
If available, please attach your Firefox crash logs to the bug using the Attachments field.
Show hidden files and folders. For more details, see the instructions for the operating system that you use: Vista and Windows 7.
Crash logs are located at C:\Users\username\AppData\Roaming\Mozilla\Firefox\Crash Reports\
Logs will be located in either the pending or submitted folder, depending on whether or not you submitted the crash report to Mozilla.
Last resort
Finally, if these problems are blocking you from using Flash Player we recommend, as a last resort, you either revert back to Flash Player 11.2 or temporarily disable Protected Mode. We strongly recommend that Protected Mode is manually enabled once this issue is resolved.
To revert to a previous version of Flash Player, please see this FAQ: How do I revert to a previous version of Flash Player?
To disable Protected Mode, add the following line to your mms.cfg file located in:
Windows 32bit: C:\windows\system32\macromed\flash
Windows 64bit: C:\windows\syswow64\macromed\flash
ProtectedMode=0
If the mms.cfg file does not exist, create one using any standard text editor (e.g.. notepad)
Depending on your operating system, you might need to first save the mms.cfg file to a writable location (such as your documents or desktop folder) and then copy the file into the destination folder using Windows Explorer.
To re-enable Protected Mode, simply remove the line from the mms.cfg file.
Hopefully this FAQ helped you. Please let us know by taking a minute to fill out this simple survey.
Did this FAQ help?Please ask your question on a forum for the Flash Player
-
I am unable to use firefox after the latest update. All troubleshooting methods listed on the website has been tried. I am unable to click anything in the firefox, tabs don't work, options don't work, unable to launch diagnotics, help or anything from firefox. Basically, I am unable to access anything within firefox.
Did you try a new profile?
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 23: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
RalphHi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe
Maybe you are looking for
-
Help! How to create Jar file for a packaged class?
Hi! I am new in jar complexities. I made a swing frame that just prompts a JOptionPane when executed. I accomplished the same using jar without packaging my class SwingTest. But when i package it, it doesn't run. Can any one tell me how to make jar f
-
What program for backing up my windows-partition?
hey. i recently made a new partition using boot camp assistant. its formatted as ntfs with windows 7. the problem is, i need more space. the logical thing to do is to clone the windows-partition from os x, then delete it. this way i could just make a
-
Printer not-accepting APP-FND-00500: AFPPRN received a return code of failu
Hi Gurus, skgtag: not-accepting APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1. This is my error. My same request output is printing to other printers. But it is not printing in particular pr
-
24" iMac having startup issues
I thought I would post here in an effort to try and see if there is anything else I can do before heading to an Apple Store tomorrow. I own a 24" iMac, which I got in the fall 2006. A few weeks ago, this problem first occurred. The computer started u
-
Chapter-ID Error in MIGO for STO Invoice
Dear Guru, While doing MIGO for STO Invoice Chaper-id error in coming, Even though chapteri-d is maintained for the Material i am getting chaper -id not updated error , Please help. regards rajakarthik