E-mail bounce in sap system.

We are trying to send an e-mail from my personal address (abc.) to the e-mail address xyz. This last e-mail addressed is connected to the mailreceiveplsapcp400.hs.emeadc.lighting.abc. e-mail address. Which will be delivered at the CP4(production) system.
However this mail is being bounced.
After checking the system we've found out that the connection from the mail server to the CP4 is working fine. However the mail does still not receive *in SAP.* Can you please check this issue. Maybe within SAP, maybe on unix mail-agents which are not running fine, or port-binding which is not correct.
I have checked following setings
1) <Scot> -- every think green (ok)
2) ping mailreceiveplsapcp400.hs.emeadc.lighting.abc. (ok)
3) <sm37> -- SAPCONNECT ALL SEND(Finished)
NOTE : we can send mail from sap to xxx ,but not recieve in sap
is it require more settings for receiving mail in sap if plsss help me.
Regards
mohsin mulani

From:     Mail Delivery System [MAILER-DAEMONsmtprelay-eur1.philips.com]
To:     imc.marketing.lampsphilips.com
Sent:     2008 Sep 16 11:16 AM
Subject:     Undeliverable: TEST mail
Delivery has failed to these recipients or distribution lists:
imc.marketing.lampsphilips.com
An error occurred while trying to deliver this message to the recipient's e-mail address. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
The following organization rejected your message: plsapcp400.hs.emeadc.lighting.philips.com.
NOTE: user try tio send mail in sap system (not from sap system)
regards
mohsin mulani
Edited by: mohsin mulani on Sep 25, 2008 10:27 AM

Similar Messages

Sending mail from one Sap system to another

Hi all,
plz explain me how can i send mail from one SAP system to other SAP system.
Thanks in advance
Venkat

Hai Venkat
Go through the following Code
DATA: OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST   LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA L_NUM(3).
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
Mail Contents
OBJTXT = 'Object text'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT ITAB_DATA.
    CONCATENATE ITAB_DATA-PRODUCTOR
                ITAB_DATA-VBELN
                ITAB_DATA-POSNR
                ITAB_DATA-MATNR INTO OBJBIN.
    APPEND OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'ORDERS'.
APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'TXT'.
OBJPACK-OBJ_NAME   = 'WEBSITE'.
OBJPACK-OBJ_DESCR = 'ORDERS.TXT'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
target recipent
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
copy recipents
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY     = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_CHNG
       TABLES
            PACKING_LIST               = OBJPACK
            OBJECT_HEADER              = OBJHEAD
            CONTENTS_BIN               = OBJBIN
            CONTENTS_TXT               = OBJTXT
            RECEIVERS                  = RECLIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
Thanks & regards
Sreenivasulu P

Sending e-mails between different SAP-Systems with SMTP

Hello,
I want to send e-mails between two different internal SAP-Systems. I already configured SMTP in both systems but ist not possible to send an e-mail from system A to system B. I've got following error message:
Cannot process message; no node determined for <sapuser>:
Thanks in advance & best regards,
Christoph

Hi Christoph,
but it is possible that the email for user from System B is also available in the system itself(transaction so01) and not only in his outlook inbox?
As the email is sent from System A. It will be available under SOST of system A.
As user in System B is receiving the email, it will be appearing in users inbox.
Check with Mail server administrator on where to enable SMTP relaying for IP address of SAP server.
Hope this helps.
Regards,
Deepak Kori

E mail facility in SAP system.

Hi friends,
Can anybody will help me regarding e mail facility available in SAP.
And how to it active or implement?
For example - When the material receives at gate the 103 movement done,now as soon as 103 movement entered immedeate ( automatic) that mail should generate and send it to respective buyre to his e mail address.Like purchase order / schedule line this facility is available.
thanks in advance
hemant

There is no std functionality is availabe but you can do the work around as follows
MAke the reason for movement is required entry for movement type 103 in MIGO and define the reason for movement in OMBS (Tcode) then assign that in GR for 103 and run the report MBGR.
If you want to see immidiate then you can setup this program in background run for every 5 minutes for that user so he/she will come to know whenever the movements happen.
Or use the Early warning system to echeive the above solution
Hope this will help you

Send mail from SAP system to another SAP system

Hello Xperts
I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
thkx
Prabhu
PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap system

Hi
To send mail Internally check this sample code it works fine this code was developed by me
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& ABAP/4 Consultant *
*& Name- Pavan Praveen Valluri Created on 26/07/2007 *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
* SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'@gujaratpetro.com'.
* Data: p_email(25) type c value '[email protected]'.
* END OF SELECTION SCREEN ------------------------------------------- *
*----------DATA DECLARATION--------------------------------------------*
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,
 gd_error type sy-subrc,
 gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
 BELNR LIKE BSEG-BELNR,
 ZUONR LIKE BSEG-ZUONR,
 GJAHR LIKE BSEG-GJAHR,
 DMBTR LIKE BSEG-DMBTR,
 HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
 TXT50 LIKE SKAT-TXT50,
 SAKNR LIKE SKAT-SAKNR,
 KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
 BELNR LIKE BKPF-BELNR,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
*-------- END OF DATA DECLARATION--------------------------------------*
*--- CONCATENATING AND ARRANGING DATE ---------------------------------*
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
*--- END OF CONCATENATING AND ARRANGING DATE -------------------------*
*-------------------------SELECTION FOR BSEG---------------------------*
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
 ZUONR = lv_formatdate.
*--------------END OF SSELECTION FOR BSEG--------------------------- *
*-------------------------SELECTION FOR BKPF---------------------------*
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
*------------------END OF SELECTION FOR BKPF---------------------------*
*-------------------------SELECTION FOR SKAT---------------------------*
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--------------END OF SSELECTION FOR SKAT--------------------------- *
*-----------------POPULATING EMAIL SUBJECT ----------------------------*
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
*------------END OF POPULATING EMAIL SUBJECT --------------------------*
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
** Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 object_header = t_object_header
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
 ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
 submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
 refresh it_message4.
*--------------- LOOP FOR BSEG -----------------------------------------
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
 GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*---CHANGING DATE FORMAT FOR BKPF---------------------------------------
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
*-------------POPULATING EMAIL BODY WITH DATA -------------------------
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
 into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
*------------END OF LOOP FOR BSEG --------------------------------------
endform. " POPULATE_EMAIL_MESSAGE_BODY

To send an mail with external attachment check this one

first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv

Then include that report in the following report and copy the same code and paste it there

*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
* Receivers
receiver_list-recextnam = '[email protected]'. "-->
* EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
* General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
* Mail subject
w_object_hd_change-objdes = 'Message subject'.
* Mail body
APPEND 'Message content' TO message_content.
* Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
Regards
Pavan

E-mail bounce For system.

We are trying to send an e-mail from my personal address the e-mail address (XXXX). This last e-mail addressed is connected to the (XXXX) e-mail address. Which will be delivered at the CP4 system.
However this mail is being bounced.
After checking the system we've found out that the connection from the mail server to the CP4 is working fine. However the mail does still not receive in SAP. Can you please check this issue. Maybe within SAP, maybe on unix mail-agents which are not running fine, or port-binding which is not correct.
I have checked
(1) <sm37> : SEND SAPCONNECT INT >>> suuccesfully.
(2) ,scot> : every thing is ok (green)
(3) <sost> : erroe >> Cannot process message in SAP System , long text >> No ESMTP Plug-In Is Available for SAPconnect
Application Server Used by the Send Process:
plsapcp401
As per sap note this parameter rdisp/start_icman = true
(4) <rz11> rdisp/start_icman = true
(5)from os level >> ping mail host mail port >> its pinging
Regards
mohsin mulani
Edited by: mohsin mulani on Sep 23, 2008 5:39 AM

Hi mohsin,
Check in SMICM that the ICM is actually up and running. Some times it doesnt start automatically. Then check if you have configured the SMTP service in SMICM -> Goto -> Services and there should be an entry for SMTP.
If not you will need to create one in SMICM (455140 gives the RZ10 instance parameters).
Hope this helps
Michael

Get an E-Mail-Notification if there is a alert for a SAP-System in DSWP

Hello,
how can i get an E-Mail-Notification when there is a alert in a SAP-System?
I know that alerts are shown in the transaction dswp under System Monitoring but exists a alternative to get these alerts via E-Mail?
In the transaction rz21 autoreactions can be defined for single MTE classes - but i search for a more generally method to get all in DSWP reported alerts via E-Mail.
Best Regards
Torsten Urban

Hello All,
You can get EWA reports thru mail.
Selection the solution for which you want the reports thru mail in DSWP tcode.
Then Edit>Automatic Email transmission>create Email recipeint.
Hope this solves your query.
Cheers,Amber S

SCOT - How to send a mail from mail server to a SAP system

Dear SAP colleagues,
With SCOT you can configure the SAPConnect administration.
You can easily configure your SAP system to allow the send of email from SAP to your mail server.
Exemple :
1. SID SAP : DL1
2. Mail server : sn1exch.lec.local
3. Target email : "myeamailaddress"
Send email process 01 : 1. DL1 ==> 2. Mail Server ==> 3. You read your email in your inbox "myeamailaddress"
My problem :
From my inbox "myeamailaddress", I want to be able to send email to SAP (Dl1).
Send email process 02 : 1. My inbox "myeamailaddress" ==> 2. Mail Server ==> 3. SAP (DL1).
Question :
Do you have any help to configure it ?
Thanks in advance for your input.
Best regards
NetWeavAdmin

Dear Olivier,
I do not have a specifi technical problem.
Let's summarize - my request concerns a SRM Workflow :
I am ordering an article. When the order is higher than 2'000 USD, I need to get the approval of my manager.
That's the workflow.
Workflow :
1. I am user in DL1 SAP System.
    UserName : CharlesN
    In SU01,
    charles(a)green.com
2. From DL1 SAP system, I order articles. The order total amount is higher than 2'000 USD.
    In the workflow, an mail from DL1 is automatically send to my manager in his MS-Outook inbox.
    (manager(a)green.com)
3. My manager reads the mail I have sent him and give his approvals by clicking on a approvals button.
    When clicking the button, an mail must be automatically send from my manager MS-Outlook inbox
    to DL1 to CharlesN inbox in SBWP in DL1 SAP system.
I have configured SCOT and read OSS Note 455140.
The SAPconnect virtual host is activated in DL1 (SICF).
I think a miss a step in our mail server to relay a mail from MS-Outlook to my SAP system.
Any suggestion is welcome.
Best regards

Update data of pdf (offline adobe forms) to sap system By Inbound E-mail

Hello,
I am trying to update data in PDF (offline adobe forms) to Sap system by Inbound E-mail. Kindly give some suggestions for scenario to do this task.

Hi,
There ia a good information for your requirement.
Please check the below link.
http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/c0c139d3-3eae-2910-01a1-d253f2587b0e&overridelayout=true
Thanks.
Uma

Unable to send mails to outlook from sap system through workflow

Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
Regards
RAGHAVENADAR

Hello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M

User couldn't recieve the mail from SAP SYSTEM

Hi all experts,
User couldn't recieve the mail from SAP SYSTEM since the Unicode changes were pushed ,
how to fix the issue ?
Thanks & Best regards,
Michael

Hi Michael,
Is the SAPConnect configured as per note [455140|https://service.sap.com/sap/support/notes/455140] ?
Since you are talking about receiving emails, do you see the emails in SOIN transaction (or report RSBCSIN)? Have you tried telnet directly to the SAPConnect plugin as described on note [607108|https://service.sap.com/sap/support/notes/607108]
What is the value of parameter is/SMTP/virt_host_<*>?
Regards,
Tiago

SMTP enables for Authent. for Username & Pwd - All mails are bounces in SAP

Hi..
Our mail administration team strengthened the securities.
Initially SMTP was secured with Host IP addresses.
Now SMTP security settings changed
which in turn demands user name & password.
From SAP when we are sendout - how to send this information to SMTP server?
Thanks in Advance.
Regards
PR

Hi.. Thanks for you quick reply.
From last 3 years we were on this same solution.
But, mail administrators binded another layer of security which must demands for username & password.
Can we store any where passwords of SMTP in SAP System
Thanks
Rgds
PR

How to check received mails in SAP system

Hi Experts,
I have a requirement where I need to send an email from Outlook to SAP system using SMTP.
All the SMTP configurations and settings have been done.
I had a query that how do I check that the mail is recieved in the SAP system.
Like we have Utilities - Overview of send orders to check the mails sent from the SAP system, do we have some place to check the receiving mails also?
I came to know about a SOOD table, but no entry is been made in it when I test sending mail.
Any help would be highly appreciated
Regards,
Saumya

Hi Saumya,
You can try this just to see if your CRM is receiving emails.
Go to t-code SCOT and then Utilities->Trace Settings. Activate the trace for inbox.
Then send an email to your CRM system.
Wait a few seconds and then go to SCOT again, and then Utilities->Trace Selection.
Check if an entry corresponding to your email was created.
If not, maybe some configuration is missing. I've always worked in a Interaction Center scenario, with ERMS integration. For that, the configurations steps need were:
- Activated the workflow
- Configurate t-code SO28 to generate the ERMS object
- Used ERMS rule modeler to route my emails to an organization ID
- Activated service SAPCONNECT (with an user associated for authorization)
Hope that this may help you to go a little trough.
Kind regards.

Receiving mails in SAP system

Hi Experts,
I have a requirement where I need to send an email from Outlook to SAP system using SMTP.
All the SMTP configurations and settings have been done.
But when I send a mail from Outlook to SAP, it is not getting displayed in SOIN. I have waited for 1 hr taking in considerations slow network connectivity to check in SOIN.
I have checked the settings in RZ10 for instance profile. I am using port 25 and virtual host 0 for connectivity.
Please let me know where I might be lacking in doing the settings.
Regards,
Saumya

Hi Sowmya,
I am using a standard workflow for approval of Appropriation Requests (App. Req.)
We have 5 approvals(persons) in the headachy.
I want to know the status of a App. Req.
i.e which persons are approved
at which person it is pending
or whether it is approved by all the 5 persons
In which table I get this information ois there any Function module to get this info?
I want know the status of a request by passing app request number
Can u plz send ur reply to narendra.maddipatiATtatatel.co.in

Sending mail to Internet address from SAP system

Hi...
My requirement is to send a mail to an internet address say ABC@companyid from SAP.
I have used a FM So_New_Document_Send_API1 for the purpose.For this I have provided
             e_mailrec-receiver = w_emailid.
              e_mailrec-rec_type = 'U'.
              APPEND e_mailrec.
But I get an error msg in SOST, that the route from (SAP server) to (mail id) not found.
Instead of internet address when I give rec_type as B i.e. SAP USER it sends a mail to my SAP inbox.
I have also checked SAPConnect, and it is fine.
Is the above FM only for sending mails to SAP id, then wats the FM for sending mails to internet address? Its just sending a 1 line mail without attachment.
P.S: I have gone through search in sdn so please don't provide me with links to other threads.
Reply only if you can actually help and know wats this about.
Thnaks and Regards.

These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
Send new document
For Code
http://www.forum.saptechies.com/viewtopic.php?t=5562

E-mail bounce in sap system.

Similar Messages

Maybe you are looking for