E-mail group for multiple contacts

I want to creat an e-mail group for multiple contacts so I only need to select the group and then send an e-mail to all the contacts in that group. How do i creat a distribution group in icloud from my Outlook Address book?

Hi,
Yes, when logon to ePrint Center, at the top frame, left hand side, there is a place you can +Add Printer. Click to this and follow the instructions.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Mail Groups with Multiple Contact Email Addresses

I cannot find a way to create a Group in Address Book where the contacts have more than one email address. In fact I have not been able to get emailing to groups with Mail to work at all. I always get prompted to select one of my other outgoing SMTP servers... none of them work, iCloud, Gmail, private domain. I don't understand why this is so difficult.
I have read online that Groups do not support contacts with multiple email addresses... Really? Say it isn't so!

User A can have one mailbox associated with his ID. You can create other "User A" mailboxes with different names and e-mail addresses as shared mailboxes and grant User A full mailbox rights and send as right. User A can
then connect to each one of them separately.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

Is there a way to create different groups for my contacts using the installed contact app

I am trying to make a group on my contacts. So that it's easier to just make messages to people and not having to make group messages every single time. For example, making a group for a sports team so that I can just message everyone in the group at once.

No not possible but you can create contact groups at www.icloud.com and if you have contact synced thru cloud the groups you make at www.icloud.com will appear on your phone

OIM 11g - Mail Notification for multiple resources

User will be provisioned to 5 target system through access policies.So instead of sending 5 different mail notifications to the manager on the Create User task about the account creation, is it possible to send one consolidated mail about the provisioned resources in OIM 11g.

Hi,
How abt for the following requirement for sending single mail for multiple resources provisioned.
We have 3 Access Policies which is defined as follows.
1) Policy 1 -> R1,R2,R3 Resources
2) Policy 2 -> R3,R5 Resources
3) Policy 3 -> R1,R4 Resources
In such a case we will not be able to put dependencies on Resources and adding a task for sending email.

Tollerence group for multiple user

hii all
can any one tell me how shall i assign multiple tollerence group to multiple user? and also tell me, while creating tollerence group am i have to give the tollerence group with co code? or just only co code?? please solve
regards rajesh Kr Mahato

Hi,
'assign multiple tollerence group to multiple user'-it's not possible,in table V_T043 the key is USNAM
'while creating tollerence group am i have to give the tollerence group with co code? or just only co code??'-I don't understand. In table V_T043T you need to put CC and Tol.group

How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

Changing field staus group for multiple accounts

Hi,
Is it possible to change the FSG for multiple accounts at the same time, or does it have to be done one by one through FS00?
Thanks and Regards

Hi Sam,
Try this t-code :
OB_GLACC12
Hope it is useful.

Sticky group for multiple serverfarms

For ACE, would the inclusion of more than one serverfarm on a sticky group create a conflict for the connections to servers?
On CSM, usig the same sticky group on two different vservers will create a conflict for corresponding serverfarms.
Is this an issue on ACE - should a separate sticky group created foe each ServerFarm?
sticky ip-netmask 255.255.255.0 address source Group1
timeout 60
replicate sticky
serverfarm SF1
serverfarm SF2
serverfarm SF3

Its same as CSM. You can have just one serverfarm per sticky group.
you should never use the same sticky group for different farms, otherwise that will break the VIP logic i.e. connections meant to serverfarm1 could end up being sent to serverfarm2.
Syed Iftekhar Ahmed

Mail - Support for Multiple Identities (under one OS account).

Let me define what I mean by an "Identity" before that is misunderstood.
In Entourage, you can have multiple email accounts (just like in Apple Mail). However you can create multiple Identities, each of which only has access to that Identity's email accounts.
For example, the Mac is operating using one User Account: lets call this account "Dave". Now while logged into this User account on the Mac, I can have an Entourage Identity called "Dave - Personal" that only has access to a group of personal email accounts. I can then (within Entourage) switch to an Identity called "Dave - Work" that would then only have access to my work email accounts.
All the while, regardless of which Entourage Identity I am using, I am at all times still logged in to the Mac User account "Dave", so I have access to all of the same data (documents, etc.).
Is there a way to have Apple Mail operate in the same manner?
Before anyone asks why....
I keep my work emails and my personal emails in different Identities, within the same Mac User account. I do not open up the work Identity (with the work-related email accounts) after 5 p.m. weekdays or during the entire weekend. (This way, I don't have to see or worry about work!) However, whether I am at work or at home, (or anywhere else) I still want to have access to all of the same data within my Mac User account. So, the solution that most people may recommend, which would be to create separate Mac user accounts for each Identity, doesn't really solve my problem.
Does anyone know if this type of functionality can be had using Apple Mail? I am growing tired of Entourage, and this is one (of several) reasons I have still not switched to Apple Mail.

In a word, No. To accomplish that you must create a separate user account. You can have multiple email accounts within Mail, however. But not as a separate identity as in Entourage.

Sending Mail to all E-Mail Accounts for a Contact

Hi all,
When I'm sending mail to someone in Address Book, is there a way I can send the mail to all of their email accounts?
Thanks

The only "simple" way to achieve this is to create a new card for each email that contact has, then add them to a group, then when you send an email, select that group and the email will be sent to each of the email addresses of your contact.
hope this helps

How to copy the same address for multiple contacts in Address Book?

Hi! I got a question, I didn't find an answer for yet.
How to copy the post address from one contact to another, without manual entering. I mean if I have one contact with already entered post address, can I just copy it someway at once to another contact?
I don't want cards to merge, I need separate contacts, that may have different phones, e-mails, but the same post address. Please, advise.

Thanks! yes, this is a solution I'm following now. But I was wondering about the similar way as it is made in Daylite or Contactizer - you create company with name and post address first, and then can create a contact for that company. And company name and post address will appear in contact name.
I just wonder why such a simple and useful solution isn't available in Address Book as default.
I know there are many scripts written for Address Book. Maybe there is something for this purpose?

Purchasing Groups for multiple Purchase Organizations

Dear all,
in SRM 5.0 we are using two different purchase organizations which are linked to backend purchase organizations in extended classeical szenario.
When I try to assign purchasing groups linked to backend purchasing groups to both both purchase organizations I get the following error message:
>> Purchasing group xxx in system xxx already assigned to unit xxx
>> Message no. BBP_ATTR030
>>
>> Diagnosis
>> You have attempted to enter the backend ID of a purchasing group or to change an existing one. >> >> However, this backend ID is already allocated to unit xxx (organizational unit xxx) in the organizational structure.
>>
>>
>> Procedure
>> Enter a different backend ID for the selected purchasing group.
Is there a way to assign purchasing groups to more than one purchase org?
Thanks and regards
AD

Hi,
See the solution in the foll thread:
Same Purchasing group assigment to multiple Purchasing Org
BR,
Disha.
Do reward points for useful answers

Creating new group with multiple contacts

What is the simplest way to create a new group with say 8 or 10 names that have been cc'ed on an e-mail? Essentially, I would like to be able to add all of the names at once to my Address Book, then using this same list create a new group. I can't find a way of doing this other than one at a time, unless I'm missing something obvious. Thanks for any help.

There is collection of AppleScripts called Mail Scripts you can download at this link.
http://homepage.mac.com/aamann/Mail_Scripts.html
The script to use from the collection of scripts is Add Addresses (Mail) which adds addresses found in the selected messages (in the header fields "From", "To", "Cc", and "Bcc") to the Address Book. This is much more flexible than the "Add Sender to Address Book" available in Mail and provides a convenient way for creating mailing lists.

Different e-mail alerts for different contacts

Can I have only certain e-mails alert me with a tone and let all others remain silent in iOS5? I use my phone for work and want to assign e-mails from specific people to audibly alert me and let all the rest remain silent so I'm not bothered by unimportant e-mails. My old Blackberry let me do this for years but so far can't get my iPhone to do it. Is this available with iOS5?

How to create custom notification tones in iOS 5
Users of iOS 5 for iPhone, iPad and iPod touch devices can create free custom notification tones
http://www.pcworld.idg.com.au/article/404445/how_create_custom_notification_tone s_ios_5/

E-mail group for multiple contacts

Similar Messages

Maybe you are looking for