E-Mail ID not updating the portal My settings

Hi Gurus
We have updated the e-mail id in the user account in T-code SU01D, but when the user is checking in the SRM portal my setting the e-mail address is not updating.
Please suggest me.
Thanks & Regards
sada

Hi
As per SAP standard it must update.
In SRM 5.0 it is working.
if not update in your version create OSS message against SAP.
send me your screens if you need any help.
HRALXSYNC must synchronise your data check box as user flag = user name who wants to update the email data.
regards
Muthu

Similar Messages

HT1430 mail is not behaving the way it should after updating to ios 6.1.2

after updating to ios6.1.2 on Saturday March 9, 2013 the mail is not operating the way it should. What can i do to try and fix it?

Nobody here would know since you didn't explain in detail why it's not operating the way it should.

HT4061 My mail will not update and stay current. Its always searching but doesn't do anthing. Any suggestions for ipad3?

My mail will not update and stay current. Its always searching but doesn't do anthing. Any suggestions for ipad3?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Mail box not updating inbox

I have gmail set as my mail preference in mail and it's not updating the inbox. I'm wondering if and how I can reset the gmail account. Can someone also tell me if what's the purpose of recovery folder. It is full of the same message over and over.
Thanks

If you mean you want to rebuild your mailbox, that's at the bottom of the Mailbox menu. If you mean you want to delete and reconfigure your Gmail account, that's in Mail>Preferences>Accounts. As for your Recovery folder, I've never seen that on my Mail, but it sounds like your Mail tried to salvage a corrupted message.

My mail is not updating like on my iOS device

My mail is not updating like how it is constantly doing on my iphone

You have to open Mail. The reason is unknown now, but Apple can add it in an update soon

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Not Updating the Values in the JComboBox and JTable

Hi Friends
In my program i hava Two JComboBox and One JTable. I Update the ComboBox with different field on A Table. and then Display a list of record in the JTable.
It is Displaying the Values in the Begining But when i try to Select the Next Item in the ComboBox it is not Updating the Records Eeither to JComboBox or JTable.
MY CODE is this
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.DefaultComboBoxModel.*;
import javax.swing.table.*;
import java.sql.*;
import java.util.*;
public class SearchBook extends JDialog implements ActionListener
     private JComboBox comboCategory,comboAuthor;
     private JSplitPane splitpane;
     private JTable table;
     private JToolBar toolBar;
     private JButton btnclose, btncancel;
     private JPanel panel1,panel2,panel3,panel4;
     private JLabel lblCategory,lblAuthor;
     private Container c;
     //DefaultTableModel model;
     Statement st;
     ResultSet rs;
     Vector v = new Vector();
     public SearchBook (Connection con)
          // Property for JDialog
          setTitle("Search Books");
          setLocation(40,110);
          setModal(true);
          setSize(750,450);
          // Creating ToolBar Button
          btnclose = new JButton(new ImageIcon("Images/export.gif"));
          btnclose.addActionListener(this);
          // Creating Tool Bar
          toolBar = new JToolBar();
          toolBar.add(btnclose);
          try
               st=con.createStatement();
               rs =st.executeQuery("SELECT BCat from Books Group By Books.BCat");
               while(rs.next())
                    v.add(rs.getString(1));
          catch(SQLException ex)
               System.out.println("Error");
          panel1= new JPanel();
          panel1.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.fill = GridBagConstraints.HORIZONTAL;
          lblCategory = new JLabel("Category:");
          lblCategory.setHorizontalAlignment (JTextField.CENTER);
          c.gridx=2;
          c.gridy=2;
          panel1.add(lblCategory,c);
          comboCategory = new JComboBox(v);
          comboCategory.addActionListener(this);
          c.ipadx=20;
          c.gridx=3;
          c.gridwidth=1;
          c.gridy=2;
          panel1.add(comboCategory,c);
          lblAuthor = new JLabel("Author/Publisher:");
          c.gridwidth=2;
          c.gridx=1;
          c.gridy=4;
          panel1.add(lblAuthor,c);
          lblAuthor.setHorizontalAlignment (JTextField.LEFT);
          comboAuthor = new JComboBox();
          comboAuthor.addActionListener(this);
          c.insets= new Insets(20,0,0,0);
          c.ipadx=20;
          c.gridx=3;
          c.gridy=4;
          panel1.add(comboAuthor,c);
          comboAuthor.setBounds (125, 165, 175, 25);
          table = new JTable();
          JScrollPane scrollpane = new JScrollPane(table);
          //panel2 = new JPanel();
          //panel2.add(scrollpane);
          splitpane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,panel1,scrollpane);
          splitpane.setDividerSize(15);
          splitpane.setDividerLocation(190);
          getContentPane().add(toolBar,BorderLayout.NORTH);
          getContentPane().add(splitpane);
     public void actionPerformed(ActionEvent ae)
          Object obj= ae.getSource();
          if(obj==comboCategory)
               String selecteditem = (String)comboCategory.getSelectedItem();
               displayAuthor(selecteditem);
               System.out.println("Selected Item"+selecteditem);
          else if(obj==btnclose)
               setDefaultCloseOperation(JDialog.DISPOSE_ON_CLOSE);
          else if(obj==comboAuthor)
               String selecteditem1 = (String)comboAuthor.getSelectedItem();
               displayavailablity(selecteditem1);
               //System.out.println("Selected Item"+selecteditem1);
               System.out.println("Selected Author"+selecteditem1);
     private void displayAuthor(String selecteditem)
          try
          {     Vector data = new Vector();
               rs= st.executeQuery("SELECT BAuthorandPublisher FROM Books where BCat='" + selecteditem + "' Group By Books.BAuthorandPublisher");
               System.out.println("Executing");
               while(rs.next())
                    data.add(rs.getString(1));
               //((DefaultComboBoxModel)comboAuthor.getModel()).setVectorData(data);
               comboAuthor.setModel(new DefaultComboBoxModel(data));
          catch(SQLException ex)
               System.out.println("ERROR");
     private void displayavailablity(String selecteditem1)
               try
                    Vector columnNames = new Vector();
                    Vector data1 = new Vector();
                    rs= st.executeQuery("SELECT * FROM Books where BAuthorandPublisher='" + selecteditem1 +"'");
                    ResultSetMetaData md= rs.getMetaData();
                    int columns =md.getColumnCount();
                    String booktblheading[]={"Book ID","Book NAME","BOOK AUTHOR/PUBLISHER","REFRENCE","CATEGORY"};
                    for(int i=1; i<= booktblheading.length;i++)
                         columnNames.addElement(booktblheading[i-1]);
                    while(rs.next())
                         Vector row = new Vector(columns);
                         for(int i=1;i<=columns;i++)
                              row.addElement(rs.getObject(i));
                         data1.addElement(row);
                         //System.out.println("data is:"+data);
                    ((DefaultTableModel)table.getModel()).setDataVector(data1,columnNames);
                    //DefaultTableModel model = new DefaultTableModel(data1,columnNames);
                    //table.setModel(model);
                    rs.close();
                    st.close();
               catch(SQLException ex)
}Please check my code and give me some Better Solution
Thank you

You already have a posting on this topic:
http://forum.java.sun.com/thread.jspa?threadID=5143235

Work order should not update the fields in PR

Hi Gurus
My requirements is that workorder should not updates the purchasing data fields in PR do not go to the shoping cart. How can make it possible.
Thanks in Advance

Hi,
I am not sure of your requirement clearly but check up the below user exits :-
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
regrds
pushpa

Login settings will not update the local testing server files

When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
It does however update the Connections file and the login wizard form.
What is the best way to change login settings before uploading site to web server?
Thanks
Dan

Dan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.

DYNP_VALUES_UPDATE not Updating the Field on my Dynpro

Hi.
I want to create a dynpro where two fields are. Field 1 allows the user to enter a customer number, field two shall come up with a number that is calculated somehow. The calculation can last up to 20 seconds, so I dont want to make the user waite for this number.. .he shall be able to work with the rest of the dynpro.
Therefore I called the function that does the calcuiation like that:
MODULE user_command_0100 INPUT.
DATA: lv_guid_16 TYPE guid_16.
IF kna1-kunnr IS NOT INITIAL AND kna1-kunnr <> gv_kunnr
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        ev_guid_16 = lv_guid_16.
    gv_taskid = lv_guid_16+8(8).
    CALL FUNCTION 'YDETERMINE_DEPOTDISTANCE'
      STARTING NEW TASK gv_taskid
      PERFORMING receive_depent ON END OF TASK
      EXPORTING
        i_kunnr = kna1-kunnr.
ENDIF.
ENDMODULE.
The next piece of code shall get the returning value if the function wants to return its results.
FORM receive_depent USING i_task TYPE clike.
TABLES: d020s.
DATA: dyname LIKE d020s-prog,
        dynumb LIKE d020s-dnum.
DATA: BEGIN OF dynpfields OCCURS 1.
          INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
IF i_task = gv_taskid.
    RECEIVE RESULTS FROM FUNCTION 'YDETERMINE_DEPOTDISTANCE'
    IMPORTING
      e_depent         = kna1-yydepent
      e_accuracy       = gv_accuracy.
    MOVE 'KNA1-YYDEPENT' TO dynpfields-fieldname.
    MOVE kna1-yydepent TO dynpfields-fieldvalue.
    APPEND dynpfields.
    dyname = sy-cprog.
    dynumb = '0100'.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = dyname
        dynumb               = dynumb
      TABLES
        dynpfields           = dynpfields
      EXCEPTIONS
        invalid_abapworkarea = 01
        invalid_dynprofield = 02
        invalid_dynproname   = 03
        invalid_dynpronummer = 04
        invalid_request      = 05
        no_fielddescription = 06
        undefind_error       = 07.
    ASSERT sy-subrc = 0.
ENDIF.
Problem is: The DYNP_VALUES_UPDATE does not update the field on my dynpro at all. If I hit enter another time, then the field is provided by the value as another PBO will be processed. What is my mistake here?
Regards
Manfred
Edited by: Rob Burbank on Oct 29, 2010 12:07 PM

Hi Manfred,
Replace all the DYNP_VALUES_UPDATE-related content by the following statement:
SET USER-COMMAND 'xxx'.
While DYNP_VALUES_UPDATE does update the fields, a roundtrip is not triggered so the content of the fields will not be refreshed. The SET USER-COMMAND does that.
Hope this helps you!
Cheers, Roel

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

BAPI_SALESORDER_CREATEFROMDAT2 is not updating the ITEM Qty after Free ITEM

Hi,
I am using BAPI_SALESORDER_CREATEFROMDAT2 to create a order.We have customization for populating a FREE ITEM for a Order ITEM.
Now the Problem is that .....if I am passing more then one Material as ITEM it is not updating the next ITEM Qty and also not populating FREE ITEM afterwords first one.
Please help me.
Regards
Ricky

Hi,
Find below the code :
read table i_table_t into lwa_table_s index 1.
if sy-subrc eq 0.
*Order Header
    lwa_ord_head_in-doc_type          = 'ZSO'.
    lwa_ord_head_in-sales_org         = '1000'.
    lwa_ord_head_in-distr_chan        = '10'.
    lwa_ord_head_in-division          = '10'.
    lwa_ord_head_in-req_date_h        = lwa_table_s-delivery.
*Order Header Update
    lwa_ord_head_inx-doc_type         = 'X'.
    lwa_ord_head_inx-sales_org        = 'X'.
    lwa_ord_head_inx-distr_chan       = 'X'.
    lwa_ord_head_inx-division         = 'X'.
    lwa_ord_head_inx-req_date_h       = 'X'.
    lwa_ord_partners-partn_role       = 'AG'.
    lwa_ord_partners-partn_numb       = lwa_table_s-sold_to.
    append lwa_ord_partners to lt_ord_partners.
    if lwa_table_s-ship_to is initial.
      lwa_ord_partners-partn_role     = 'WE'.
      lwa_ord_partners-partn_numb     = lwa_table_s-sold_to.
      append lwa_ord_partners to lt_ord_partners.
    else.
      lwa_ord_partners-partn_role     = 'WE'.
      lwa_ord_partners-partn_numb     = lwa_table_s-ship_to.
      append lwa_ord_partners to lt_ord_partners.
    endif.
    lt_table_it_t = lwa_table_s-zsd_table_it_t.
    loop at   lt_table_it_t into lwa_table_it_s.
      lwa_ord_items_in-material      = lwa_table_it_s-matnr.
      lwa_ord_items_in-plant         = wa_table_s-plant.
      lwa_ord_items_in-target_qty    = lwa_table_it_s-qty.
      lwa_ord_items_in-comp_quant    = lwa_table_it_s-qty.
      append lwa_ord_items_in to lt_ord_items_in.
      lwa_ord_items_inx-material     = 'X'.
      lwa_ord_items_inx-plant        = 'X'.
      lwa_ord_items_inx-target_qty   = 'X'.
      lwa_ord_items_inx-comp_quant   = 'X'.
      lwa_ord_items_inx-updateflag   = 'I'.
      append lwa_ord_items_inx to lt_ord_items_inx.
Schedule Line Information
      lwa_schedule_lines-sched_line = 'X'.
      lwa_schedule_lines-req_date    = lwa_table_s-date_del.
      lwa_schedule_lines-date_type   = '1'.
      lwa_schedule_lines-req_qty     = lwa_table_it_s-qty.
      append lwa_schedule_lines to lt_schedule_lines.
      lwa_schedule_lines_x-updateflag = 'I'.
      lwa_schedule_lines_x-sched_line = 'X'.
      lwa_schedule_lines_x-req_date   = 'X'.
      lwa_schedule_lines_x-date_type = 'X'.
      lwa_schedule_lines_x-req_qty    = 'X'.
      append lwa_schedule_lines_x to lt_schedule_lines_x.
    endloop.
Here I am getting First Item and it's free configured Item perfectly for the Qty 1.
But when I pass more then 1 Qty or Multiple ITEMS it is not populating other respective free configured ITEMS with them.Also IT is not updating the other ITEM Qty other the first one.
For Example:
Item No      ITEM            Qty           .......
10             ITEM1           1 EA        ..........
20             FREE1          1 DAY     ..........
30             ITEM2            0             ..........
40             ITEM3            0             .........
In above example After 30 and 40 two Free ITEM should be generated with 1 Day and for Qty 1 EA
Regards
Ricky

ITunes could not update the carrier settings on your iPhone

When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?

Jim VanLeeuwen wrote:
You will find them in separate folders within your user account Library/iTunes folder.
That was it. Somehow the owner of ~/Library/iTunes got changed to root.
Jim VanLeeuwen wrote:
Have you tried using Disk Utility to Repair Permissions?
Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
I manually changed the owner to steve and was able to download and install the carrier settings.
Thanks!

E-Mail ID not updating the portal My settings

Similar Messages

Maybe you are looking for