E.mail is locked.  Unable to perform functions such as reply

Email Email is locked.  Unable to perform functions such as reply

Reset your iPad. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears  ignore the red slider, let go of the buttons and let the iPad restart. Then try mail again.

Similar Messages

  • Mail displays locks up when trying to forward or reply messages.

    Hey all - This just started happening out of the blue. Whenever I select a meaage to forward or replay to, Mail (Version 2.1.1 (752.3) become unresponsive and the rainbow pin wheel appears. I then have to force application to quit. Sending, receiving, opening messages, etc. all ssem to work fine though. I even placed both Library caches in the trash in an attenpt to fix the problem, but this lock up keeps happening. Any ideas/help? Thanks.

    Hello.
    What type of mail account is this (POP, IMAP, .Mac)? If IMAP or .Mac, what are your Preferences > Accounts > Mailbox Behaviors > Drafts settings?
    Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations (Parallels in particular, if you have that installed) and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
    The first release of Safari 3 Beta was known to cause this problem in Mail as well, so be sure you either don’t have that installed or install the latest version.

  • Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

    Hello,
    I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template. 
    So, I now want to try and update my service template.  However, whenever I try to do anything with it, in the services section, I receive the error:
    Unable to perform the job because one or more of the selected objects are locked by another job.  To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object.  ID 2606
    Well I tried that and there doesn’t seem to be a job locking the object.  Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all.  I tried running the following query in SQL:
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
    I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
    Can anyone help?

    No one else had this?

  • Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

    I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
    Error (2606)
    Unable to perform the job because one or more of the selected objects are locked by another job.
    Recommended Action
    To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
    I have already tried running the following command in SQL Server Management Studio
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    I received this error back:
    Msg 8169, Level 16, State 2, Line 1
    Conversion failed when converting from a character string to uniqueidentifier.
    I have also tried rebooting both the host and the Virtual Machine Manager Server.  After rebooting them both, I still receive the same error when trying to remove the host.
    Here are my server details
    VMM Server OS = Windows 2012 Standard
    VMM Version = 2012 R2 3.2.7510.0
    Host OS = Windows 2012 R2 Datacenter
    Host Agent Version = 3.2.75.10.0
    SQL Server OS = Windows 2012 Datacenter
    SQL Version = 2012 SP 1 (11.0.3000.0)

    Hi there,
    How many hosts are you managing with your VMM server?
    The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
    If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
    Thanks!
    Cheng

  • Cannot save any changes - Microsoft Forefront 2010 for exchange is unable to perform the requested function

    HI, I have Forefront 2010 for Exchange installed for an Exchange 2007 SP2 running on Windows 2003 x64 SP2. Exchange has all roles installed on the same server. 
    When I try to save any change on Forefront I got the following message:
    Microsoft Forefront 2010 for Exchange is unable to perform the requested function. This may be because Forefront services are unavailable. Ensure that all Microsoft Forefront services are running and that WindowsPower Shell is functional
    Well, our FF services are running and PowerShell is functional. I checked some forums and found some problems when there is entries in the IP Allow / Block lists in Exchange UI. I removed those entries but problem remains.
    Any ideas would be appreciated.
    Xavier Villafuerte

    In my case, I was able to work around this issue by using  PowerShell directly.  For example, to run an on-demand scan for all mailboxes, this worked:
    #open EMS
    $aliases = (get-mailbox -result unlimited).alias
    Add-PsSnapin FSSPSSnapin
    set-FseOnDemandScan -MailboxList $aliases
    Start-FseOnDemandScan -EnableVirusScan $true
    Windows 2008 R2 SP1
    Exchange 2010 SP3, RU9
    PowerShell 4.0 present on the machine (though EMS runs PS 2.0)
    Forefront PowerShell cmdlets:
    https://technet.microsoft.com/en-us/library/cc482986.aspx
    Mike Crowley | MVP
    My Blog --
    Baseline Technologies

  • Microsoft forefront protection 2010 for exchange server is unable to perform the requested function

    I get the following error any time I try and change any setting:
    Microsoft Forefront Protection 2010 for Exchange Server is unable to perform the requested function. This may be becuase Microsoft ForeFront services are unavailable. Ensure that all Microsoft ForeFront services are running and that Windows Powershell is
    functional.
    I have installed the latest rollup for SEP. Rollup 5 I think. I have rebooted the server. I have checked the permissions and they are correct.
    Any thoughts?

    I posted a PowerShell-based workaround in the other thread:
    https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
    Mike Crowley | MVP
    My Blog --
    Baseline Technologies

  • When i openned an excel attacment from an e-mail, it locked uped the e-mail. All other functions are ok.

    when i openned an excel attacment from an e-mail, it locked uped the e-mail. All other functions are ok.

    So if you tap the excel document you don't get a Done button at the top ? If not then try closing the Mail app completely : from the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Unable to perform Calculations on Excel exported from Web Dynpro ABAP

    Hi Gurus,
    I have a custom functionality "Export to Excel" internal table data on my web dynpro application. I dint go with standard ALV feature because it doesnot give flexibility to add colours to excel sheet and add multiple tabs and so i had to write XML ABAP coding in the web dynpro application to achieve this. While passing the internal table data into cells, i created cells with string data type and hence all the fields in the excel are now in char type. Users are unable to perform any calculations because of this issue, i tried to format the cells but it doesnot work. Please help me.
    Regards,
    Pravs.

    Hi,
    Just do the following in excel before downloading and check whether it works.
    Tools->Options->International tab.
    In that mention decimal separator as ,(comma).
    Thousand separator as .(dot).
    Uncheck use system separators.

  • Unable to perform Service Entry Maintenance

    Hi experts,
    Currently i have a PO line with Account Assignment "A" (asset). The G/L account, Asset#, WBS element and Earmarked fund fields have been maintained.
    But when performing Service Entry Maintenance, there is a message, "function code cannot be selected" appeared, resulted in unable to perform the service entry.
    However, the same G/L account, WBS element and Earmarked fund when used on another P/O, was ok, able to perform service entry.
    Appreciate if anyone can offer any explanation or solution to this, thanks.
    JL

    Hi
    Pls. check PO is released or not ?
    then check field Ser Based IV of Invoice tab at item level is flagged or not?
    If helpful...
    Regards,
    Rajeev

  • Troubleshoot Error - Unable to perform table-based value assignment config

    After to creating class, characteristics, and value assignment type, the system is unable to perform table-based value assignment configuration. The following error is displayed:

    Hi Mr. SAP,
    Based on the diagnosis, you can figure out that most likely someone is already editing the customizing table or might you are not authorized..
    In case if you have the access to SM12 Transaction code, kindly check if an entry present there. If yes it means the table is locked and you can't proceed on that. you have to reach out to the specific resource to unlock the table who did a lock, else you need to reach out to BASIS to make that entry delete.
    Regarding authrization for locking of table, please check SU53 after the execution of the T-code, if you are missing any role. If you find anything there, then reach out to your Security team to get and assigned roles to your profile.
    Regards,
    Abhi

  • I cannot perform any function such as opening emails in my hotmail

    I'm able to sign in, although my sign in screen looks totally different now. I am unable to perform any function once I've signed in.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • 'Service this device' gets 'Unable to perform the operation' Deskjet 6940

    Installing this software on several different  XP SP2 boxes. The install does fine (although very long) and I can print to the printer. However, when I go to the printer properties and select Preferences and the Services tab, I click the "Service this device" icon and get only "Unable to perform this operation". I get the same results on 3 different computers. I tried installing the software from the CD, both USB connected and network connected. I also downloaded the latest s'ware from the HP site and got the same results.
    Any ideas here? Without this function I have no way to clean the print heads and such later on, even though the printing works OK.
    The only reference I could find previously by searching said that it happens when running the Firefox browser. I'm not doing that.

    After i've set Internet Explorer as default browser it Works !
    What a strange solution

  • N82 UNABLE TO PERFORM BLUETOOTH OPERATION

    HAVE A N82 FOR ABOUT 6 MONTHS. I HAD PERFECTLY CONNECT MY PHONE WITH MY LAPTOP (MICROSOFT OUTLOOK ...) AND A BH-902 WIRELESS BLUETOOTH DEVICE UNTILL YESTERDAY.
    I HAVE LOST CONNECTIVITY WITH THAT TWO "RELIABLE" DEVICES.
    I TRIED TO RECONNECT THEM FROM THE START BUT I KEEP HAVING A MESSAGE IN THE BLUETOOTH FUNCTION SAYING "UNABLE TO PERFORM BLUETOOTH OPERATION" AND IT STAYS UNACTIVATED SO ALL MY TRYINGS KEEP FAILING.
    CAN ANYONE HELP ME OUT SOMEHOW WITH THIS PROBLEM?

    i have the same problem... with the bluetooth. It just suddenly stopped working
    and some more problem... i dont have any warranty since my n82 was only given to me as a gift. i dont have receipt or doesnt know where to get the receipt.
    there have been quite a number of posts with regards to n82 bluetooth crashing after an update. Im not sure why mine crashed. I need some help here....
    I have read in some posts that its a bluetooth chip default. Some bad batch. 
    wont nokia fix this for free? it aint my fault they installed a faulty bluetooth chip. its sounds so unfair

  • E51 Unable to perform bluetooth operation.

    Hi Team,
    I am a proud owner of Nokia E51 from last one year,i am facing issue in turning on the bluetooth from past few day .
    Whenever i try to turn on the bluetooth it gives an error message "Unable to perform bluetooth operation."
    I tried both soft and warm reset also even after formating the phone it is not working,please help me.
    Current software version is 220.34.37.

    Hi Team,
    I am a proud owner of Nokia E51 from last one year,i am facing issue in turning on the bluetooth from past few day .
    Whenever i try to turn on the bluetooth it gives an error message "Unable to perform bluetooth operation."
    I tried both soft and warm reset also even after formating the phone it is not working,please help me.
    Current software version is 220.34.37.
    tell me any option
    MODERATOR'S NOTE: E-mail address was removed. It is unwise to publish personal contact information on a public forum.

  • 5800: Unable to perform Bluetooth Operation

    Hi, on my Nokia 5800 I always get the message 'Unable to perform Bluetooth Operation' when trying to turn on Bluetooth. I I already tried several  proposed solution, without succes unfortunately.
    * Remove battery
    * Hard reset
    * Soft reset
    * hit it on the side as proposed somewhere in the forum.
    I raised a request through Nokia support a week ago. They promised to contact me withing the 48 hours, but I have't heard anything from them.
    I have fw: 30.0.011. Altough Nokia site says there is a newer version I cannot update my phone yet  (tried via Nokia update on PC and on mobile itself)
    Any suggestions on how to solve this?

    Guys, I´m sorry to be the one to break it down to you, but it seems the culprit for this problem is a virus.
    I know it sounds farfectched but I had the same problem, I did a lot of research and in an spanish board someone mention that if you had made a backup of the whole phone with PC suite from before the problem with teh bluetooth arise, then restore it and that the bluetooth functionality would be back, he went on to say that this virus erased files vital to the bluetooth operation. So I went on and did the restore, and lo and behold, bluetooth is back!!!! but he also warned not to be very happy as he said the virus still looms in teh cell and that it will erase the files again taking the bluetooth with it.... I did the restore 1 hour ago, and I still have the bluetooth working.
    Lets hope it remains that way.
    Please let me know if this works for anyone else and how long it lasts.
    Cheers,
    PICburn

Maybe you are looking for

  • Dropping a table in WEBDB2.0

    Hi. Could anybody kindly tell me how to drop a table owned by myself? I only see how to build, but couldn't find how to drop a table... Thank you very much!! Hester

  • D2KWUTIL and Forms 9i/ 10g.  Does it work?

    Hi, I am trying to using d2kwutil in forms9i. functionality i want is to open a pdf document in new browser window and search for a particular string in the document. and thats the end of the story. 1. can i using d2kwutil.pll/dll for this requiremen

  • What is the secrect to print 4x6 Index Cards in an HP C309a

    I have a Microsoft Word Template for printing recipes on 4x6 Index Cards.    However, there is no known combination of settings on my HP C309a that will let me print Index Cards.    The built-in Printing Shortcuts contains an entry called Postcard Pr

  • Complete disaster and can't even contact support

    Hi I hope someone patient enough to read this can help me. I recently purchased an ipod touch second hand. I have the black box and original instructions - tiny tiny faded instructions. Please bear with me, I know this is long. 1) whenever I play a s

  • Typing happens automatically in input fields

    happens at start-up to input password and in safari