E-mail not working since beginning of December

my e-mail has suddently stopped working and have tried to enter set up but it does not recognise my user name or password - i have tried everything suggested but nothing works pls help

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, it depends on exactly what credentials you say are not being recognized...
If it is your BIS credentials, then you should contact your mobile service provider for formal support.
If it your BBID credentials, then refer:
http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Mail not working since OS X Yosemite download

    Mail not working since OS-X Yosemite download! Getting the message ''your mail index has been damaged, to repair it, quit mail'
    Same message keeps appearing despite following instructions - need mail for work! Hope someone has the answer please? iPhoto not working either since download.

    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/MobileMeAccounts.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Push mail not working since morning in India

    Hi, Can anyone tell me if they are facing the same problem.
    I have been using Nokia Push mail services, but since today morning I have noticed that I am unable to send or receive mails from it.

    Hi,
    I live in gujarat i have upgrade my e63 with e 5 but after purchasing there was problem with not synce email automatically then after nokia care replased the phone but same problem was presist..
    then after i have sold that phone and purchase the new nokia e72 before 10 days but the same problem i m facing ..not syncronising email either manual or automatic..so i m very upsate with this kind of problem with nokia and no body can answer on the problem ..
    so can u pls help me how to esclate this problem to nokia higher authority..coz after spending so much money nobody can even slove the problem
    Thanks & Regards
    Hardik Upadhyay
    Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.

  • Mail not working since visiting US

    I went to Miami this year and took my macbook with me.
    Since returning I can collect email on my Yahoo.co.uk account but I cannot send mail. I was not aware anything was changed and indeed all looks well in the accounts.
    Any idea what I need to do?

    +fix it+
    Seriously - without additional information no one can assist you
    Have you contacted Yahoo?
    Have you looked at the Yahoo FAQs?
    How are you accessing your yahoo.co.uk account?
    what happens when you try to send mail?
    What changed from the time it worked until it failed?
    What other details are there that might let someone assist you?
    Larry Nebel

  • Mail not working since iOS 8.2 upgrade

    hi - my Mail has stopped downloading to my iPhone 5 mailbox since I uograded to IOS 8.2.
    I had a similar issue with 8.02 however that fixed itself after a few days, however whatever I have tried (reinstalling myail account, rebooting the phone) it is still now working.
    Does does anybody have and suggestions on how to fix?

    no je veux la langue française sur le site tu me comprend?

  • Command line mail not working since Server 2.2

    Since Mountain Lion, everytime Server.app updates it borks my previous mail settings/hacks/workarounds to the issues with the last version. I just want sendmail, mail, postfix, etc to work and stay working. I even have my own list of stuff to reapply with each Server.app update, but sadly even that has stopped working.
    Just basic mail won't even work:
    $ mail adam
    Subject: test
    This is a test mail
    ⌃D
    $ mail
    No mail for adam
    Here are my current settings.
    $ sudo serveradmin fullstatus mail
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 0
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "STOPPED"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "STOPPED"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "ON"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "RUNNING"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "ON"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "RUNNING"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-02-05 16:26:45 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = ""
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-02-05 16:26:45 +0000"

    Yes, the ProgramArguments key contains the exact array you posted.
    And here is the output for
    sudo serveradmin settings mail
    mail:postfix:smtpd_pw_server_security_options:_array_index:0 = "cram-md5"
    mail:postfix:smtpd_pw_server_security_options:_array_index:1 = "digest-md5"
    mail:postfix:smtpd_pw_server_security_options:_array_index:2 = "login"
    mail:postfix:smtpd_pw_server_security_options:_array_index:3 = "plain"
    mail:postfix:spam_quarantine = "[email protected]"
    mail:postfix:smtp_reject_list_enabled = no
    mail:postfix:bayes_path = "/Library/Server/Mail/Data/scanner/amavis/.spamassassin/bayes"
    mail:postfix:smtp_sasl_auth_enable = yes
    mail:postfix:whitelist_from = _empty_array
    mail:postfix:submit_cred:XXXXXXX.local:username = "submit"
    mail:postfix:submit_cred:XXXXXXX.local:password = "XXXXXXXXXXXXXXXXXXXXXXX"
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_userid = "[email protected]"
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_pwd = "XXXXXXXXXXXXXX"
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_host = "smtp://smtp.gmail.com:587"
    mail:postfix:client_permit_mynetworks = yes
    mail:postfix:smtpd_tls_cert_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
    mail:postfix:maps_rbl_domains_enabled = no
    mail:postfix:spam_subject_tag = "***JUNK MAIL*** "
    mail:postfix:smtpd_tls_CAfile = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
    mail:postfix:message_size_limit_enabled = yes
    mail:postfix:virus_db_last_update = "2013-02-06 13:52:18 +0000"
    mail:postfix:mail_enabled_groups = _empty_array
    mail:postfix:add_whitelist_domain = _empty_array
    mail:postfix:virus_scan_enabled = yes
    mail:postfix:spam_ok_locales = "en"
    mail:postfix:spam_notify_admin_email = "[email protected]"
    mail:postfix:black_hole_domains:_array_index:0 = "zen.spamhaus.org"
    mail:postfix:virus_db_log_level = "notice"
    mail:postfix:spam_scan_enabled = yes
    mail:postfix:virus_quarantine = "[email protected]"
    mail:postfix:reject_unauth_piplining_enabled = no
    mail:postfix:blacklist_from = _empty_array
    mail:postfix:spam_rewrite_subject = yes
    mail:postfix:message_size_limit = 10485760
    mail:postfix:greylist_disable = no
    mail:postfix:mynetworks:_array_index:0 = "127.0.0.0/8"
    mail:postfix:virus_log_level = "notice"
    mail:postfix:host_whitelist = _empty_array
    mail:postfix:rbl_override_list = _empty_array
    mail:postfix:group_expansion:start_interval = 10
    mail:postfix:group_expansion:enable_group_expansion = no
    mail:postfix:virus_notify_recipients = no
    mail:postfix:luser_relay_enabled = no
    mail:postfix:mydomain = "XXXXXXX.local"
    mail:postfix:mydestination:_array_index:0 = "localhost"
    mail:postfix:virus_notify_admin_email = "[email protected]"
    mail:postfix:enable_virtual_domains = yes
    mail:postfix:spam_notify_admin = no
    mail:postfix:required_hits = 6
    mail:postfix:add_whitelist_host = _empty_array
    mail:postfix:always_bcc_enabled = no
    mail:postfix:enable_var_mail = no
    mail:postfix:junk_mail_userid = "junkmail"
    mail:postfix:smtpd_tls_key_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
    mail:postfix:enable_smtp = yes
    mail:postfix:relayhost = "smtp://smtp.gmail.com:587"
    mail:postfix:not_junk_mail_userid = "notjunkmail"
    mail:postfix:mynetworks_enabled = yes
    mail:postfix:spam_ok_languages = "en fr de ja sw ta"
    mail:postfix:virtual_domains:_array_index:0 = "imap.gmail.com"
    mail:postfix:rbl_override_enabled = no
    mail:postfix:log_rolling_days = 1
    mail:postfix:enable_smtp_in = yes
    mail:postfix:tls_server_options = "use"
    mail:postfix:spam_action = "deliver"
    mail:postfix:log_rolling_days_enabled = yes
    mail:postfix:spam_log_level = "warn"
    mail:postfix:smtp_uce_controlls = 1
    mail:postfix:relayhost_enabled = yes
    mail:postfix:virus_action = "delete"
    mail:postfix:virus_db_update_days = 12
    mail:postfix:virus_notify_admin = no
    mail:postfix:domain_whitelist = _empty_array
    mail:postfix:enable_smtp_out = yes
    mail:postfix:text_only_attachments = yes
    mail:postfix:reject_unknown_client_enabled = no
    mail:postfix:log_level = "warn"
    mail:postfix:myhostname = "XXXXXXX.local"
    mail:global:auto_auth = yes
    mail:global:service_data_path = "/Library/Server/Mail"
    mail:imap:imap_auth_cram_md5 = yes
    mail:imap:srvtab = "/etc/srvtab"
    mail:imap:imap_auth_clear = yes
    mail:imap:loginuseacl = no
    mail:imap:popexpiretime = 0
    mail:imap:notifysocket = "/var/imap/socket/notify"
    mail:imap:timeout = 30
    mail:imap:max_imap_connections = 1000
    mail:imap:sieve_maxscripts = 5
    mail:imap:logtimestamps = no
    mail:imap:quota_enforce_restrictions = no
    mail:imap:tls_imap_key_file = ""
    mail:imap:mupdate_authname = ""
    mail:imap:newsprefix = ""
    mail:imap:proxyservers = _empty_array
    mail:imap:junk_mail_userid = ""
    mail:imap:singleinstancestore = yes
    mail:imap:mupdate_password = ""
    mail:imap:imap_auth_digest_md5 = yes
    mail:imap:tls_cert_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
    mail:imap:lmtp_admins = _empty_array
    mail:imap:poptimeout = 10
    mail:imap:postuser = ""
    mail:imap:imap_auth_plain = yes
    mail:imap:quota_custom_error = _empty_dictionary
    mail:imap:tls_imap_cert_file = ""
    mail:imap:aps_topic = "com.apple.mail.XServer.e8cc7328-2fe9-4b6f-aae5-b6f26f9287b3"
    mail:imap:sieve_proxyservers = _empty_array
    mail:imap:request_enable_webmail = no
    mail:imap:lmtp_luser_relay_enabled = no
    mail:imap:unixhierarchysep = no
    mail:imap:urlauth_hostport = ""
    mail:imap:imap_auth_gssapi = no
    mail:imap:partition-default = "/Library/Server/Mail/Data/mail"
    mail:imap:allowanonymouslogin = no
    mail:imap:quota_custom_warning_message_path = ""
    mail:imap:imapidlepoll = 60
    mail:imap:quota_custom_error_message_path = ""
    mail:imap:enable_pop = yes
    mail:imap:tls_session_timeout = 1440
    mail:imap:mupdate_server = ""
    mail:imap:mupdate_realm = ""
    mail:imap:auth_gssapi_hostname = ""
    mail:imap:enable_sieve = yes
    mail:imap:lmtpsocket = "/var/imap/socket/lmtp"
    mail:imap:enable_quota_warnings = no
    mail:imap:mupdate_port = ""
    mail:imap:postmaster = "postmaster"
    mail:imap:pop_auth_gssapi = no
    mail:imap:pop_auth_apop = yes
    mail:imap:deleteright = "c"
    mail:imap:proxyd_allow_status_referral = no
    mail:imap:sharedprefix = "Shared Folders"
    mail:imap:sasl_auto_transition = no
    mail:imap:tls_ca_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
    mail:imap:sasl_minimum_layer = 0
    mail:imap:sievedir = ""
    mail:imap:debug_command = ""
    mail:imap:duplicatesuppression = yes
    mail:imap:tls_lmtp_key_file = ""
    mail:imap:servername = ""
    mail:imap:quota_full_tempfail = yes
    mail:imap:partitions = _empty_array
    mail:imap:tls_imap_require_cert = no
    mail:imap:sieve_admins = _empty_array
    mail:imap:global_quota = 0
    mail:imap:mupdate_retry_delay = 20
    mail:imap:not_junk_mail_userid = ""
    mail:imap:quota_custom_warning = _empty_dictionary
    mail:imap:enable_imap = yes
    mail:imap:popminpoll = 0
    mail:imap:tls_pop3_key_file = ""
    mail:imap:sendmail = "/usr/lib/sendmail"
    mail:imap:tls_lmtp_cert_file = ""
    mail:imap:tls_require_cert = no
    mail:imap:notification_server_enabled = yes
    mail:imap:tls_sieve_require_cert = no
    mail:imap:defaultpartition = "default"
    mail:imap:pop_auth_clear = yes
    mail:imap:allowallsubscribe = no
    mail:imap:sasl_pwcheck_method = "auxprop"
    mail:imap:sieve_maxscriptsize = 32
    mail:imap:tls_sieve_key_file = ""
    mail:imap:tls_ca_path = ""
    mail:imap:defaultacl = "anyone lrs"
    mail:imap:reject8bit = no
    mail:imap:tls_key_file = "/etc/certificates/XXXXXXX.local.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
    mail:imap:tls_pop3_require_cert = no
    mail:imap:sasl_maximum_layer = 256
    mail:imap:autocreatequota = 0
    mail:imap:tls_sieve_cert_file = ""
    mail:imap:userprefix = "Other Users"
    mail:imap:mupdate_admins = _empty_array
    mail:imap:postmaster_address = "[email protected]"
    mail:imap:mupdate_username = ""
    mail:imap:quota_warn_frequency_days = 0
    mail:imap:tls_pop3_cert_file = ""
    mail:imap:aps_topic_enabled = yes
    mail:imap:quotawarn = 80
    mail:imap:plaintextloginpause = 0
    mail:imap:enforce_quotas = no
    mail:imap:tls_server_options = "require"
    mail:imap:allowplaintext = yes
    mail:imap:loginrealms = _empty_array
    mail:imap:lmtp_luser_relay = ""
    mail:imap:imapidresponse = yes
    mail:imap:tls_cipher_list:_array_index:0 = "DEFAULT"
    mail:imap:imap_auth_login = yes
    mail:imap:admins = _empty_array
    mail:imap:altnamespace = no
    mail:imap:sieveusehomedir = no
    mail:imap:tls_lmtp_require_cert = no
    mail:imap:log_level = "warn"
    mail:imap:umask = "077"
    mail:imap:hashimapspool = no
    mail:imap:imap_proxyservers = _empty_array

  • Mail not working since new system loaded for iPad

    Not getting mail or sending...... Since new system loaded. My settings are all the same as before and match my iBook This is a glitch

    Can you connect to the internet" Have you tried resetting your iPad?

  • Mail not working since installing 10.7.3 Supplementary Update

    My mom installed the updates that came through yesterday (3/8/12), and ever since they completed she's had issues where the refresh indicator by the inbox won't stop spinning, and anything she deletes or sorts is automatically restored to its original location.  Looking through the software update log, it appears that the 10.7.3 Supplementary Update is the most likely candidate for what's causing the issue.
    Has anyone else had this issue?  If so, what can be done to fix it?

    Thanks for bumping this, I forgot to update it after calling Apple for support on the issue.
    Short of it is that it was a corrupted mailbox cache at fault.  I don't remember the location offhand precisely, but something to the effect of this should do the trick: http://thenitai.com/2009/02/22/apple-mail-problems-and-how-to-fix-it/

  • Apple mail not working since Yosemite installed

    I have had not new mail on my MacBook Pro laptop for several days.  I do receive mail on my iPod Touch.  The popup message on the MacBook mail states:   "Mail cannot send your password securely to the server. You can remove this restriction in the Accounts preferences by setting “Allow insecure authentication”, which could put your password at risk. " Please advise what to do - I am reluctant to allow insecure authentication.
    Sharon

    I am reluctant to allow insecure authentication.
    You should be, but if that's what your mail server requires, you'll have to do it anyway, or else switch mail providers (recommended.)

  • HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

    My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

    Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning?  Has always worked for me with my Epson scanner.

  • I can not get my regular mail to work since I changed to moved to iCloud. What do I need to do?

    I can not get my regular mail to work since i moved to iCloud. What do I need to do to update?

    Go to Settings>Wi-Fi.  At the bottom, make sure the "Ask to Join Networks" is ON.  When you are out and about, any network the iPad sees will be shown and it will ask you if you want to "Join" it.  If it is unsecure/free you tell it yes and you should connect.  However, if there is a little padlock looking icon shown with the network name, it means that it is a secure network and you need a password to join.  If you don't know it, you can't join.  At most Starbucks and such, the Wi-Fi is free and you should be able to simply connect.  Not really that hard.  There are not security settings on your iPad to adjust.  You'll figure it out.
    Best.

  • Drag and Drop not working since last software update

    Drag and Drop not working since last software update - this is occuring on Outlook for the mac and I just tried moving  an icon on the doc and the same thing occured.  YOu can drag but the items will not drop.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • 10.5.2 MAIL not working  ... A rotten Apple !  Any suitable alternatives ?

    POP or IMAP not working since upgrading from Tiger. All I get is "Could not connect to this POP Server ..." or "could not connect to this SMTP Server" yet can Telnet Server on port 25 or 110. Checked and re-checked settings/Server/Ports. Tried nearly everything suggested in the forum to no avail.
    Any suitable alternatives besides Thunderbird ?
    Will Apple ever fix Mail ?

    No problems here after upgrading and running my gmail through mail as pop.
    well, ok I have no new mail alert sound playing, but that's a different story grrrrr

  • Widgets, Safari, Software Update -- All not working since I got Comcast

    My Dashboard, Safari and Software Update have not worked since I got Comcast internet. I'm pretty sure their installer screwed up something, but I don't know how to undo it. Firefox, Adium, Mail and other internet applications all work great.
    I tried to fix the Software Updater problem a while ago and was able to get it to see what is available (by adding swquery.apple.com to the sites that bypass proxy settings), but it still refuses to download anything.
    I can't help but think there's one thing that's causing all this trouble. Any thoughts?

    You can have up to 5 computers authorized at one time with iTunes. There's no reason to deauthorize until you want to go over the limit. You can do this once a year. Do a clean install of the OS on the mac you are selling.
    hpr3

  • Where can i exchange my not working iphone bought in Switzerland (on july 12, 2012.) that just turned off and not working since. In croatian store they don't want to give me replacement phone!!!!

    I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support

    “the EU is considered one country for warranty purposes“
    Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
    Some how you need to get your phone back to Switzerland.

Maybe you are looking for

  • How to batch change year only?

    I would like to batch change the year only (leaving all other metadata, to include day and time, the same.  In a recent 5 day shoot I have discovered that my camera was set on 2013 rather than 2014.  Is this possible?  The date, to include year, does

  • How can i set  "Createdby" attribute  When using Custom JheadStart Security

    Hello We do not use JASS for Authentication , please help us how can i set createtby attributes with jhs.username in application for any entity object? thanks

  • Using web service to update rows on InfoPath form

    I managed to get a proof of concept working where I can read data from a web service to populate a table on my InfoPath form. I have found information about how to use a web service to "submit" data from the InfoPath form. But what if I want to updat

  • Customer Consignment QI or Restricted

    Hi We're implementing the customer consignment solution but we've noticed that there is no blocked status for customer consignment stock.  The status we have to choose from are 'customer consignment quality inspecition' and customer consignment restr

  • Creating Index on a XML generated from Dataset

    HI mark, I have an XMLTYPE table that contains data of the following format <ROWSET> <ROW> <column1>1</column1> <column2>2</column2> </ROW> <ROW> <column1>1</column1> <column2>2</column2> </ROW> <ROW> <column1>1</column1> <column2>2</column2> </ROW>