E-mail notification about process chains

Hello friends
How to go about creating e-mail notifications for Process-chain failures in BI 7.0. When I tried to right click on the Process Variant and select create Message, It doesnt shows me the screen to add the reciepients, instead it prompts me to with "Insert Send Message"
Thanks

Hi,
Did you check this doc.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
Regards.

Similar Messages

How can you configure mail settings in process chains?

HI Experts,
please let me know how can you configure mail settings in process chains?

Dear Suman,
To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
To create mails to Process chains:
Right Click on the Process varient select the Create Message in the context menu.
Select the type of mail i.e for successful, Error, Anyways.
Then follow the screens.
Note: The recipient type should be Via Internet.
Hope this helps u.
Regards,
Kishore.Pulla

Notification by email about Process chains failure

Hi,
I scheduled a process chain to run once every hour and sometimes it fails for knowing problem.
I would like to get an email every time it fails.
Could someone guide me how to get a document which gives the steps to follow or provide me a step by step for this.
Thanks,

Hi Mohamed,
You can create messages for a process that are trigerred either when the process failes, or succeeds, by right clicking on a process and choosing Create Message.
Please also check the following:
Re: Sending email from process chain not working
Hope this helps...

Email notification for Process Chain Status

Hi Experts
Can any one suggest me how to setup Email Notification for the Process Chain status
For eg If there is any error in the process chain is there any way that we get an Email notifications.
Thanks

http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64389689
This can be perfectely done using Tcode ALRTCATDEF.
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. go to your process chain (rspc)
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur".

Using Alert Framework to send email notifications when Process Chain fails

Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
Ken

Interesting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken

Help! about process chain execution status

hi:
we nearly have one problem about the process chain execution status,
when error occured during process chian execution, we fixed it in time,
however, even the error repaired, its status still showed yellow, and this
stop the subsequent process to excute.
Any body who can provide some help to solve this problem? thanks in advance
and looking forward to one reply.

Hi ,
Try this method
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like
described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Regards,
Ravi

Email notification in Process chain

Hi Gurus,
Can any one tell me if job fails or update the records immediately user should get notified with email.How to achieve this in Process Chain.I searched in forms but I could not get relevant answer.Please any one can tell me the step by step process.
Looking forwar for valuable answers.
Thanks,
Srini

Dear srini rao ,
You can send messages to an application process of the chain, depending on the success or failure of the process.
1. To do this, using the context menu for a process, create another process variant of type Send Message.
2. If you maintain a message, first specify whether you want the message to be sent when the process has been completed successfully or unsuccessfully. Then choose Next.
3. A dialog box appears, in which you can select an existing process variant or create a new one.
4. If you create a new process variant, edit the document that is going to be sent and maintain a list of recipients.
5. Save your process variant and go back.
The message process variant is now assigned to your application process. When the message is sent, the status information and the process log are also sent.
Note, you must configure SAPconnect in order to ensure that your system can send email - use transaction SCOT if this has not been configured.
It's set as a property for an individual process in the chain. You would have to set on each process where you want notification.
One technique you might consider, is that tou can create a "meta-chain" made up of local chains, and you can set a message on each of the "local chain" processes in the meta-chain
Also go through these links
How to Trigger an Alert from a Process Chain (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f4e952-e46e-2910-1f9e-cae187cd16d1
SAP Network Blog: Information Broadcaster Triggered by a Process Chain
/people/anil.bavaraju/blog/2008/02/07/information-broadcaster-triggered-by-a-process-chain
Hope it helps you,Revert me back if you have any queries
Regards
Bala

About process chain issue

Dear BW Expert,
We have argument about PC load data by manual
For the first time, I have change data selection in infopackage, then save and run the Process chain.
When my PC not running finish, the one colleague have change data selection of infopacakge, he also run that PC, at the moment, the BW System prompt:
Remove Pocess Chain from scheduling:
Last process chain run is still active
If you continue, this run will be terminated
The button are u201Ccontinueu201D & u201CCancelu201D
We have argument as following:
I think that if I click u201CConinueu201D, My PC will be terminated, my extract data will failure. Run PC like Run SM36 job. when PC run finish, my log status is RED, him log status is GREEN. Because is refresh workbook, we canu2019t directly see the data change.
he think that if Click u201CContinueu201D, My PC will be not terminated. my extract data will not faiure.
My process chain will be included him PC. He said, as long as him pc run successful, my also success. PC have change log technology, I canu2019t understand.
If so, But why my log status is RED, she log status is GREEN? Whom view is right?
Many Thanks,
Best Regards
Steve

If you will activate the process chain when it is running then the process chain execution will terminate and the status of the chain will be red.
So it is never advised to change a process chain object while it is running.
You can check the data in objects, whether it has been loaded properly.

Details about Process chain

Details about Process chain

Hi Vijay,
            Well the major components of Process chain is mentioned as under:-
A process Chain is a sequence of processes in BI system that executes in the Background.
Commonly Used Process Types
1. Start
2. Execute InfoPackage
3. DTP
4. Attribute Change Run
5. Save Hierarchy
6. Delete Index
7. Generate Index
8. Activate DSO data
9. Update DSO data
10. Complete Deletion of Data Target Content
11. Delete Entire Content of Linked Transactional DSO/ODS
12. Initial Fill of New Aggregates
13. Roll up of Filled Aggregates/BIA indexes
14. Compression of InfoCubes
15. Read PSA and Update Data Target
16. AND
17. OR
18. XOR
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
       1.      Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
       2.      Choose Create.
       3.      Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
       4.      Create a variant for a start process.
a.       On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
b.       If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
c.       Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
       5.      Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
If you insert into the chain a process that is linked to additional processes, the respective process variants are generated and inserted into the process chain automatically. These variants are suggestions and can be changed, replaced or removed from the chain if required.
Only if the attribute realignment run is inserted automatically, do you also arrive at the variant maintenance screen.
If you want to specify yourself the processes that are to be included in a chain, choose Settings ® Default Chains, and select the Do Not Suggest Processes option. As a result, the system does not suggest, generate, or insert automatically any processes into the chain. This setting is user-specific.
If the chain that you create does not correspond to the standard, the system displays a warning. You can ignore these warnings if you are sure that you are creating a chain that meets your requirements. Warnings do not affect how the chain operates during runtime.
Your chain is checked in the checking view and during activation. The system tells you if it discovers any errors.
Creating a Process Chain Using the Maintenance Dialog for a Process
You are in the maintenance dialog of a process that you want to include in a process chain.
       1.      Choose the Process Chain Maintenance pushbutton and create a process variant.
       2.      Save the variant and go back to the previous screen.
A dialog window appears in which you enter a technical name and a description of the chain that you want to create.
       3.      Confirm your entries.
The Add Start Process dialog window appears.
       4.      Create a variant for a start process.
a.       On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
b.       If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
c.       Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
The various process categories, the application processes, and collection processes are displayed in the left-hand area of the screen. In the right-hand area of the screen, the process chain is displayed.
If the process that you used to create a chain is linked to additional processes, the respective process variants are generated and inserted into the process chain automatically. These variants are suggestions and can be changed, replaced or removed from the chain if required.
Only if the attribute realignment run is inserted automatically, do you also arrive at the variant maintenance screen.
If you want to specify yourself the processes that are to be included in a chain, choose Settings ® Default Chains, and select the Do Not Suggest Processes option. As a result, the system does not suggest, generate, or insert automatically any processes into the chain. This setting is user-specific.
If the chain that you create does not correspond to the standard, the system displays a warning. You can ignore these warnings if you are sure that you are creating a chain that meets your requirements. Warnings do not affect how the chain operates during runtime.
Your chain is checked in the checking view and during activation. The system tells you if it discovers any errors.
       5.      Use the drag-and-drop function to insert any additional relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Additional Steps to Creating a Process Chain
       6.      When you add a process, you need to select a process variant or create a new variant. For collection processes, the system determines the variants.
Various functions for working with the process are available from the context menu:
Context Menu Entry for a Process
Function Information
Maintain Variants
With the exception of the variants in the collection process, you can use this function to change all process variants.
Exchange Variants
You can swap the variants for an existing variant or a new variant.
Display Scheduled Jobs
Once the process chain is active, you can use this function to display the jobs that have been scheduled.
Display All Jobs
After at least one run of the process chain, you can display, for a specific process, all of the scheduled jobs for this process and all of the jobs with which this process was run. You arrive at the job overview from where you call up the relevant job log.
Create Message
You can also send messages to an application process of the chain, depending on the success or failure of the process.
1.       From the context menu of a process, create an additional process variant of the Send Message type.
2.       If you maintain a message, first specify whether you want the message to be sent when the process has been completed successfully or unsuccessfully. Then choose Next.
3.       You arrive at a window, in which you can select an existing process variant or create a new one.
4.       If you create a new process variant, edit the document that is going to be sent, and maintain a list of recipients.
5.       Save your process variant and go back a step.
The message process variant is now assigned to your application process. When the message is sent, the status information and the process log can also be sent.
Wait Time
You use this function only to debug a process run.
Specify how long (in seconds) you want the delay to be between one event being triggered and the next process starting.
You can capture the process by using transaction SM37 (Job Overview) or SM50 (Process Overview).
Remove Process
You use this function to remove a process from a process chain.
Manage Data Target
You use this function in connection with the following types of process variants
·         constructing indexes
·         deleting indexes
·         constructing database statistics
·         rolling up filled aggregates
·         compressing InfoCubes
·         activating ODS object data
to call up the administration for each of the data targets.
       7.      Hold down the left mouse button to connect the processes through events.
Before you do this, select the process underneath the process type row, and position the cursor over the required process. When you select the process type row, the whole process is moved into the plan view.
From the context menu of a link, you can display the event or remove the link again. To do this, highlight the link and right-click with the mouse.
       8.      If necessary, specify whether you want the event to be triggered after the previous process has been completed successfully or unsuccessfully or whether you want the event to be triggered independently of the outcome of the process that precedes it.
       9.      Under Attributes ®Display Components assign a display component to the process chain.
   10.      Maintain additional process chain attributes if necessary.
   11.      Check your process chain in the Check View and make any necessary corrections.
The Legend explains the meaning of the different colors used to display the processes and links.
From the context menu for a process, you can display the messages resulting from the check.
   12.      Save your process chain if it does not contain any errors.
Result
Your process chain can be activated. After activation, the chain starts in accordance with the start process selections. For example, if you scheduled the start process directly and chose Immediately as the start date value, the chain run starts immediately after activation. In the Log View, you can display the reports for the chain runs.

Send notification from process chain to external appl. to trigger event

Hi Experts,
I need help with the following problem:
From BI I need to send a notification to an external database, non SAP, to indicate that a data load has been completed successfully. This should trigger an event on the other side to consume the data via a webservice. The "activate data" variance does include a series of notification methods like, fax, sms, email etc. but none that could function as a trigger communicating with another application without human intervention.
How can this be done? Via a function module? What would be the Abap routine for that? Any help to solve this is appreciated.
Best Regards,
Georg

Hi Georg,
may be you can implement something like this:
Having a batch job running in your ext. system to check the existance of a specific file. If the file exists, do the necessary steps and delete the file. Within your process chain run a abap at a specific step to create that file.
May be that helps.
regards
Siggi

About process chain

Hello Gurus,
in our bw system, there is a data target, which is loaded from several data source. putting there is the process chain. lay out all the loading processed in sequence, or lay them out parallelly with "and" process combining them together, what is the difference for those different lay-out methods?
Many thank.

+ lay out all the loading processed in sequence+
this will execute process in seq.. one after another.. in case one process fails, others will stop.. until the error is resolve.
+lay them out parallelly with "and" process +
in parallel, two or more process will get execute.. make sure parallel process are not dependent on each other.. adding "and" - this is conditional loading.. if u have two process in parallel followed by and.. then when they get execute, 1st both parallel process will work.. If both have success, then ur "and" condition will execute and next process following "and" will work.. u use "and" only when some condition are to be satisfy before loading next step..
say u r loading, material data & plant data & material plant details... so in parallel u'll load material master data & plant master data.. if both are loaded sucessfully (using and ) then load combination of material & plant (which plant has which material)

Information about process chain.

Hello Gurus,
I want to check who have run some process chain in the system, how can I get that infomation?
Many thanks

HI,
You can also Check in RSM37-> put * in all the fileds ->click on F8 ...give the name of your process chain in the "Selection Value" Column Filter.
You will get all process chain related info there.

Sending an Alert e-mail on execution of process chain containing ATTACHMENT

Hi Experts,
Need your help on the following,
We have a scenario where system must send an e-mail to the recipients, on the exection of a Process in the Process Chain.
This mail should contain a specific text file from SAP-Directory(AL11) as ATTACHMENT or the content of file should be directly read in to the mail, anything will work.

To send an Alert e-mail when the process chain is executed
you need to create a message setting while creating the process chain.
Suppose you want to send a mail after execution of DTP
then just do the following
right click on the DTP process in the chain and you will get a option to create message.
you'll be asked when on what condition you want to send message 1Success 2 error 3always. select as per you r requirement
select that option and a new window will appear
in the new window press Reciepent button and add recipients of the mail as per you requiremnt
press back button and save, then press create message button
here you can enter the text you want to send, other then that message wil send the status and number od records added and transfered , by default.
hope this solves your problem ..:)

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

BI admin cockpit for process chains

Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
Bhavana

Hi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process                         Target
0TCT_DS22_DELTA_DATAMART (B71)               DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71)              Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71)              Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process                                   Target
0TCT_DS01_DELTA_DATAMART               Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART             Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART              Data manager statistics (details) [0TCT_C03]

E-mail notification about process chains

Similar Messages

Maybe you are looking for