E-mail notification doesn't work after software upgrade

Based on the recommendation of a sales rep; I did the software upgrade yesterday and have had nothing but problems. All the e-mail accounts didn't work. So I spent an hour getting my e-mails setup and guess what?
Even though I have it setup to check every 10 minutes; it doesn't work. I have to manually go to each account and click on the 2 arrows to check. I used to get a flashing blue light on my phone when I had a new e-mail; now I don't.
What's going on???????????????

Hi, I did all you mentioned but still same error messages
Oct 25 14:16:42 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: Using primary internal av scanner code for ClamAV-clamd
Oct 25 14:16:42 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: Deleting db files __db.001,__db.002,__db.003,__db.004,nanny.db,snmp.db in /Library/Server/Mail/Data/scanner/amavis/db
Oct 25 14:16:42 xxx/Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: Creating db in /Library/Server/Mail/Data/scanner/amavis/db/; BerkeleyDB 0.54, libdb 4.7
Oct 25 14:16:43 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: initializing Mail::SpamAssassin (0)
Oct 25 14:16:43 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: SpamAssassin debug facilities: info
Oct 25 14:16:43 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: (!!)TROUBLE in pre_loop_hook: config: no rules were found! Do you need to run 'sa-update'?
Suicide () TROUBLE in pre_loop_hook: config: no rules were found! Do you need to run 'sa-update'?
I removed all spam filters and mail works without, which is not so good but seems to be the only way at the moment.
Any other idea or should I just reset the whole installation?
Thanks for your feedback.

Similar Messages

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Dreamweaver doesn't work after Yosemite upgrade.

Dreamweaver doesn't work after Yosemite upgrade, it asks to install Java Runtime SE 6, I've tried that, I've also installed latest Java and it still won't boot, keeps asking for for Java Runtime SE 6

You need http://support.apple.com/kb/DL1572
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Apps and media library doesn't work after software...

Hey guys!
Few days ago I updated my C3-00's software and my apps (Opera Mini and Facebook) doesn't work anymore. I tried reinstalling Opera but when I try to open it it says Opening Application and immediately after that Closing application (same with Facebook client).
My second problem is that my media library is messing with me because it maps the song artist and titles (484 songs) and only the few ones within a folder is played over and over. E.g. I try to play Queen - I want it all but Pendulum is played besides that.
Thank for helping

Read
http://support.apple.com/kb/ht1808

Nokia 5800 doesn't work after software update

hi,
couple of hours ago i downloaded ovi suite to update my phone's software. then my phone restarted as it was supposed to ,at first it didn't accept my lock code,and now it doesn't work AT ALL. i tried everything,all i see is the blue "nokia" thing then it freezes. it would be awesome if anyone could help. Thanks in advance.
Solved!
Go to Solution.

Try a hard reset
http://friedbrains-friedblogs.blogspot.com/2009/02/3-finger-salute-for-5800-full-hard.html
It WILL sort it
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Airport EXPRESS doesn't work after software update on Airport EXTREME

My Airport Express stopped working after I did my software update for my Airport EXTREME the other day. It lost the connection to my Airport EXPRESS and so I did a hard reset and tried to redo the whole profile but after many, many hard resets, I still can't make it work.
Airport Setup Assistant shows that the setup is complete and everything is fine. But if I select "Extend my wireless range", after the setup, my Airport Express won't even appear anywhere. If I select "Join my wireless network" then it will appear with a 169.xxx.xxx.xxx IP address under my Airport Utility. It will also show up on my iTunes but I can't open it using Airport Utility and iTunes spends a long time searching for it and then gives up. In all the above cases, the amber light remains flashing and the green light never comes on. What else can I do to fix this??

Either change the channel that the phone is transmitting on or change the channel the Express is transmitting on. You can do the latter in Airport Admin Utility; the former depends on your phone.

Why the wifi doesn't work after the upgrade to iOS 5?

The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.

Try a hard reset first to see if that does any good. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
iOS: Unable to update or restore
B-rock

Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

Hello,
I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
Here below is the code used to print my document :
char szJavaPrint[6000];
sprintf(szJavaPrint,
"pp = this.getPrintParams(); \r\n"
// fill pp with parameters
"pp.interactive = pp.constants.interactionLevel.silent; \r\n"
"\r\n"
"this.trustedPrint(this, pp);"
PDDoc pdDoc = AVDocGetPDDoc(avDoc);
AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
All ideas to resolve this problem are welcome.
Kind regards,
Joe

See what happens if you remove the "setting of interactive to silent"...
There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

Facetime and iMessage doesn't work after I upgrade to iOS5.0

The Facetime was working well with iOS 4.3.5 but after I upgrade to iOS 5, the Facetime can't work on my ipodtouch 4G It always failed
Does anyone have this issue too?

similar problem - after upgrading my itouch to ios5 it says my email is already in use and cannot setup imessage and facetime. Had to reset the itouch and still didn't work. any suggestions?

IPhone doesn't work after installing upgrade

Upgraded iPhone and now it doesn't work. I have a black screen with the apple logo and white line - that's all. It doesn't respond to even the power button.

Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad
App Store support. There is troubleshooting and a contact link.
Support
Time Machine
Inherit a Backup
Inherit a Backup (2)

How to I get fav places and spell chick working after software upgrade? so far nothing on help has worked

I have not been able to retreive favorite places or get the spell check working since last upgrade of firefox, Tried all the suggested fixes so far. None work.

''Seviana [[#question-1052964|said]]''
<blockquote>
I have not been able to retreive favorite places or get the spell check working
</blockquote>
Favorite Places is in the Bookmarks Manager Can you find it?
Press the '''Alt''' or '''F10''' key to bring up the tool bar. Then select
'''Bookmarks.''' Hot key is '''<Control>''(Mac:<Command>)'' <Shift> B.'''
:SpellChecker
Type '''about:config'''<Enter> in the address bar.
If a warning screen comes up, press the '''Be Careful''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar.
Type: '''layout.spellcheckDefault''' Its values are;
0 Spell Check Off, 1 Check only multi-line input boxes.
2 Check multi and single line input boxes.
Also, check the '''spellchecker.dictionary''' entry.
Separate Issue;
Your System Details shows;
Installed Plug-ins
Shockwave Flash 16.0 r0
Shockwave Flash 12.0 r0
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''Version 17.0.0.134<br>https://www.adobe.com/products/flashplayer/distribution3.html'''

Thunderbird SMTP (outgoing mail) doesn't work after Yosemite upgrade

I just upgraded to Yosemite on my Macbook Pro, and since I did that I am unable to send outgoing e-mails on Thunderbird from any one of the four accounts I have. I was able to find a fix that worked on the Apple Mail app, but I would much prefer to keep on using Thunderbird. Any ideas?

You need http://support.apple.com/kb/DL1572
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Apple mail.app doesn't work after joining google+

I use apple's mail.app to manage my multiple emails. on my main personal gmail i joined google+. ever since joining google+, mail.app no longer imports any email from that account. i can still send email through mail.app but no new received emails import into mail.app
any help resolving this issue?

I found some solutions I find unacceptable in this thread:
http://discussions.apple.com/thread.jspa?threadID=1596183&tstart=0
For some people just restarting the phone seems to fix it. For others they have to do a complete factory reset and set up the phone as a new phone it appears as if something is corrupted in the backup, so restoing from backup will bring back the same issue.
This stinks because it means that you lose all your backed up information (except calendar and contacts, which are stored separately)
I'm still looking for an alternate solution.

Samsung Galaxy 5 touchscreen doesn't work after software update

I updated the new software for my Galaxy 5 today and now have no touchscreen capability. I can't even power it off.

You can remove the battery to power off your phone to see if that clears up the issue for you. If the issue persists, you can do a hardware factory data reset on your phone. This will delete everything stored on your phone's internal storage and reset your phone to the factory state. The recent update will still be there, however. I could only find written instructions from another carrier's website, but it will apply to your phone, as well. See the link below: http://support.t-mobile.com/docs/DOC-10404

BB Curve 3G doesn't work after OS upgrading to OS6

Hello, I have a BB Curve 3G with OS 5 and after installing the upgrade to OS 6, It does not work anymore. It restarts with the logo of the network operator and that is it. It blocks on the logo of the carrier. I tried to repair it by re connecting it to desktop software but it doesn't recognize it! Is there any solution?
Thank in you advance

Hi diaddin_h
Welcome to BlackBerry Support Forums
Which Device do you have ? I think your Update process was not successful. Which method you tried to update your device software ,is it by Desktop Software or Over the Air Update ?
Now As your device is not recognized so you have to use the Application Loader to force the detection of your device and load the OS back.But remember in this process you will loose all data within your device .I hope you have your device Backup or if you are using BlackBerry Protect you can restore it later on .Please follow this Knowledge Base for further Instructions :
KB10144 : How to force the detection of the BlackBerry smartphone using Application Loader
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

E-mail notification doesn't work after software upgrade

Similar Messages

Maybe you are looking for