E-mail notification for password reset

Hello,
We recently activated the e-mail notification of user requests password reset in SRM  Portal.
After the password reset, the recipients will receive this message:
Dear  <user>,
Your password has been reset. Your new password is <password>.
Is it possible to modify this message?
Thank you!

Hi,
I think the mail is sent from workflow.
Please check which workflow is triggered in SWI2_FREQ transaction.
For example,
Workflow WS10000224 has task TS10008202 and task called method RESETPASSWORDANDMAIL of Business Object BUS4101.
Please check Business Object BUS4101 and method ResetPasswordANDMail.
The method calls FM BBP_GENERATE_PASSW_MAIL.
Some text objects are used in this FM.
001     New password for procurement system
002     This is an automatic generated email. Please don't reply!
003     Dear employee,
004     your new password in the procurement system is:
005     Please change it as soon as possible.
006     User account for procurement system
007     your user account in the procurement system is:
I can not find your text in this FM.
>Dear <user>,
>Your password has been reset. Your new password is <password>.
Regards,
Masa

Similar Messages

  • Can I spedify the SMTP to use for Password Reset Service?

    I'd like to be able to specify what mail server to use when access manager is sending out mail. The password reset service is currently looking to localhost, port 25 for the mail server when trying to send out mail. Is it possible to change this?
    Thanks.

    I believe the parameters com.iplanet.am.smtphost and com.iplanet.am.smtpport in the AMConfig.properties control this.

  • E-Mail Notification for KM Feedback

    Dear All,
    My requirement is to get the E-mail notification for some one posting feedback (repo service) for particular KM resouurces. I have made all the settings
    Configured the Notificator Service
    Enabled the Mailing Service
    Configured the Email channel and Originator.
    I have enabled Subscription for this KM folder like (/documents/Public Documents/Test Folder). If admin upload any document or files in the above folder.
    I received E-Mail notification alert.
    But for the same resources if any one posting feedback or review i didnt get any E-mail notification
    How to achieve this?

    Hi, THILLAI NATARAJAN.
    The Feedback notification comes to the UWL of the person who has created the document (folder).
    No E-Mails are sent, and subscription service does not work in that case.
    If you want to fulfill your requirements you need to create a custom portal component which adds the Feedback to the resource and sends the E-Mails too.
    Regards, Mikhail.

  • Query regarding auto e-mail notification for ccms

    Hi,
    I want to configure auto e-mail notifications for ccms alerts.
    I have configured ccms monitoring for our landscape on the solution manager.I went through the SAP documentation and it mentions that we have to do the SCOT settings and CCMS_OnAlert_Email_V2 method settings in client 000.But we already have  the SCOT config done in 100.
    My question is can i complete the rest of the config in 100 or i have to do everything in client 000 only.
    Thanks,
    Shashank

    No Shashank. I dont think this is required. You need not have to redo everything in 000 client.
    You only have to create the user in 000 client.
    Might be you have to create an RFC connection between your 000 client and the 100 client. I will confirm this to you tomorrow or so. Make sure the user has required authorizations in 000 client.
    best regds,
    Alagammai.

  • I had created a new icloud id. Now i dont remember my email id for password reset.

    i had created a new icloud id. Now i dont remember my email id for password reset. The icloud id has not been verified yet. The verification email link is also not working. Can someone suggest me how to recover my account.

    Try contacting the Apple account security team for your country: Apple ID: Contacting Apple for help with Apple ID account security.

  • Use OIM 11g UI directly for password resets

    1. What is the best practice in using OIM for password resets? Two options that i have usually heard of are writing a custom app or UI and use OIM APIs for password resets. The other is use OIM UI directly.
    Are there any other options.
    2. Of the two options mentioned above, are there any concerns if we want to expose the OIM UI password reset link to internet- example, post the OIM UI link across the company's website which is available to everybody?
    Regards,
    Anand

    People,
    Any help will be really appreciated. I am looking for some suggestions in this regards. Thanks
    Anand

  • I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?

    I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?

    I was wondering if you ever figured this out. I have the same issue. When I try to use the support communities, there are so many with the same problems and never seem to be any replys?? Not very helpful and I can not get Apple to return my emails.

  • E-mail notification for order lines maintained with an invalid license

    Hello Experts,
      I have a requirement to develop an e-mail notification for order lines maintained with an invalid license.
    T-Code VA01, this mail will be triggered if order has been blocked due to invalid or no license at the time of saving.
    we can add email notification by using some user exit.  Can you please guide me on how to go about looking for the appropiate user exit. Or any other suggestions.
    Thanks,
    Abhishek

    Abhishek,
    check this
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    Re: va01 user-exit....
    http://www.allinterview.com/showanswers/69164.html
    Thanks
    Bala Duvvuri

  • Individual Mail Notification for Self-Registration

    Hello,
    i want to use the portal self registration feature. The mail notification is not correct (URL) and the mail recipient cannot show his username/password in the mail message. Is there a way to customize this message(individual text), and where can i do this?
    thnx in advance.

    mmiller thank you for answer
    Allow the user to create a stub profile based on the data provided. I’m new to Oracle Access Manager. :-)
    Could you tell me what do you mean by stub profile?
    Now, user is allowed to add himself to directory using self registration.
    Using a post process, generate a GUID and store it on the new profile. Send an email to the user that includes the GUID key.If you are using a post processing you wrote a program which sends mails and you don’t use a mail notification. Is it true?
    Many Thanks
    Pavel

  • Security question feature required for password reset

    Hi,
    When ever SAP user forgets his password and he wants to reset his password, We need an option in logon screen to request the user to enter the answer for the security question and when he enters the correct answer, his ID should get reset and a new password should be mailed to his email id.
    Appreciate your Ideas on this one.
    Thanks

    Wild solution...
    1) Create a New User ID, which will be used for Just resetting the password based on the security question. This ID will have a password which everybody will know.
    This ID will have only few authorizations.
    2) Create a Custom Program which will take the User ID and the Question. Also some way of storing the Answer in some table (encrypted).
    Based on the ID, the question of the user will be displayed. Based on the Input by the user, the answer will be checked.
    3) If the answer is correct, reset the password and send a mail to the user id of the user. (Solution for resetting the password needs some analysis) The custom table will store user id, question, answer and the email id to which the email has to be sent.
    Reward Points if useful.
    Regards,
    Abhishek Jolly

  • Mail Notification for Approval

    Hello,
    I want to be able to send e-mail's for notification to the approvers to approve the work item (contract, shopping cart) and to a group of people information mail once the work item (contract, shopping cart) is approved and PO is created and sent to the backend.
    What is not clear to me is, do i need to use Alert and Event Management or it is only through the workflow. ( We have implemented n-step approval BADI for contract and SC) ?
    thank you,
    Can anyone help me on this issue because i am receiving mails that shouldnt be coming and dont receive the expected mail (Approve workitem)? And stuck in the workflows...
    Thank you again,
    Message was edited by:
            Gaia K.

    Gaia,
    There are two approaches.
    You can schedule std. report RSWUWFMLEC to run at regular intervals. This report sends an email to the mail client of employees who have specified that their work items are to be forwarded there. The report creates an email for each work item that can be processed.  (Program RSWUWFMLEC is used to send the email data to EBP. Then program RSCONN01 is used to send the email to external mail servers.)
    OR you can add the send mail step in your n-step approval BADI. You have to format the text on your own using the data available in BUS2121.
    Hope this helps,
    SA

  • OIM 11g - Mail Notification for multiple resources

    User will be provisioned to 5 target system through access policies.So instead of sending 5 different mail notifications to the manager on the Create User task about the account creation, is it possible to send one consolidated mail about the provisioned resources in OIM 11g.

    Hi,
    How abt for the following requirement for sending single mail for multiple resources provisioned.
    We have 3 Access Policies which is defined as follows.
    1) Policy 1 -> R1,R2,R3 Resources
    2) Policy 2 -> R3,R5 Resources
    3) Policy 3 -> R1,R4 Resources
    In such a case we will not be able to put dependencies on Resources and adding a task for sending email.

  • Not receiving email for password reset

    I cant remember my password so I tried to click on the link for Skype to send me a link, but havent received anything.??? I can login on my laptop because I dont have to input the password, and I can see that my email is correct. However I cant reset my password cause I cant receive any skype links, i checked my junk folder to no avail.please help because I cant login to skype .thank youAndrew

    Howdy bbbfrombermudadunes,
    If you are not receiving your password reset email from Apple, I would suggest that you troubleshoot using the steps in this article - 
    If you didn't receive your verification or reset email - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Automatic SMS/Mail notification for local auto-reaction method

    Hello!
    We would like to be informed via SMS/Mail about the Availability of satellite system.
    When we assign a Local auto-reaction method for this MTE (Availability_SysPercent_ABAP) we receive the SMS/Mail notification only in case we manually start the auto reaction method from RZ20.
    When we try to assign the central auto reaction method from RZ20 we get the following error:
    Assignment for local system only works with nodes from agent segments
    What is the procedure for the automatic SMS/Mail notification in case of local auto-reaction method?
    Thank you very much!

    Dear Team,
    As I have understood, you want to be informed each time a satellite system is not up and running ?
    Option 01
    ========
    1. Install the CCSMPING agent in SOLMAN
    2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
        Create all satelittes systems ...
    3. Then, from SOLMAN_WORCENTER, in SYSTEM Monitoring, you have the status of each satellites systems created
        in RZ21 (point 2).
    This option will not advised when a satellite system is down. But from one WEB page, you will have the status of all satellites systems.
    Option 02
    ========
    1.Install the CCSMPING agent in SOLMAN
    2. Create your satellites systems through RZ21 - Technical Infrastructure - Availability Monitoring - Configure CCMSPING ...
        Create all satellites systems.
    3. RZ20 - SAP CCMS Monitor Templates - Double-click on "Availability and Performance Overview"
        Open "Availability" - Then, all satellites systems which have been added under point 2 will appear.
    4. Select one satelitte system
    5. Open "Availability"
    6. Select "ABAP: Checked by CCMSPING.<solman-hostname>.00"
    7. When selected, click on "Properties" button.
    8. Then, you assign here an auto-reaction method - for example :
        "ccms_send_alert_to_alm_ccms_containerv4".
    9. Copy this method to Zccms_send_alert_to_alm_ccms_containerv4.
    10. In this method, add you email address.
    11. Then, check that job "SAP_CCMS_MONI_BATCH_DP is running. This job collects data in the CCCMS (RZ20).
    12. Then, the alert will be automatically sends to your email adress.
    Hope it helps ?
    Best regards
    SAPNetWeaverAdmin

  • Mail notification for the Project definition creation

    Hi Experts,
          I got an scenario in the PS is that once i create a project in the project builder & than i will assign the Person responsible to the project definition. Once the project definition is created then mail notification should be triggered automatically to the person responsible. can u tell me how it can be achivied.....
    As per my knowledge we want to develop a program with the help of an ABAPer then we can achivie. Is there is any other way how we can achive it?
    Thanks & regards
    Raman T S

    Hi,
    This can be acheived through a simple workflow. Ask your workflow consultant to create workflow, so that as soon as the project is created workflow can be triggered to the respective persons you want. and also the person in his inbox he can get object link for the new project created so that he can open the project directly from inbox instead of project builder
    Thanks
    regards
    kishore

Maybe you are looking for

  • Image Process is not closing the files In CS6 - what do I do?

    When using Image processor (from Bridge) - the files all save to a jpg folder in my main folder but NONE of the files close in CS6 at all.  How do I get them to close?

  • DPF.pln missing in InDesign CS5.5

    Hi, We are generating package of document using InDesign CS5.5. while generating package InDesign is showing error that DPF.pln is missing. I have checked on Google and got this link: http://www.proximasoftware.com/fontexpert/plugins/missing-fonts-lo

  • What cables to use and SPDIF

    Hi. I currently have an Audigy 2 Gamer running Vista Premium. I have looked through the forums, but I a just not sure what type of cable I need to connect to either coax digital or optical from my audigy. Can I use a 3.5mm to RCA from my card and wil

  • 11.2.0.2 upgrade of 2 databases in one home

    hi * we have new "patch" (full install) for 11.2 on linux. I have upgraded the grid. Then I upgraded my first database (and its binaries) with option "Out-of-place" - recommended (new home dir, no problem). Now I wonder how to upgrade my 2nd db runin

  • Problem importing all photos on an iMac

    iPhoto (08) on my iMac only imports the most recent event, but when I try the same import on a MacBook, all events / photos are successfully imported. Any ideas as to what the problem might be with the iMac? Thanks.