E-mail notification in SRM 7.0 for Shopping Cart Workflow

Hi Gurus
We have a requirement in SRM 7.0 Process Controlled Workflow.
1. To send E-mail notification to  approver Outlook / lotus notes in case of SC goes for approval. 
2. Incase SC is rejected by the approver then the E-mail notification has to be send to the creator of SC.
How do we configure this E-mail Notification in SRM 7.0 . Also , how do we include Customized E-Mail text while sending these notifications.
Kindly let me know .
Thanks,
Ashish

Hi Ashish,
Look out for this path ..
SPRO-> SRM Server-> cross application->event and event schema for alert management
in Define events look for Approval_process_doc_rejected and Approval_process_doc_approved
you can check for event control enter event Approval_process_doc_rejected Or Approval_process_doc_approved
and event category, event sub category
also...see Define receipeint of notifications -> here you can configure the receipeint  in case of approval / rejection.
~vipin

Similar Messages

  • SRM XI Content for Shopping Cart model (Extended Classic)

    We've loaded the XI content for SRM (XI7_0_SRM_SERVER_7.xxxx) from the sap marketplace and reviewed the data types, messages, and interfaces. It appears there are no pre-built integration scenarios associated with a Shopping Cart model (Purchase Orders, Advance shipment notice, etc). Does a set of pre-built integration scenarios exist, or are these generally built manually? We are going to be pushing purchase orders from ECC to SUS in most of our scenarios. Thanks in advance.

    Usually SAP provides the integration scenarios with template systems. But you can always create your own integration scenarios in your own SWC by making a dependency in SLD and using the Interfaces/Message Types and Datatypes in the SAP standard content.
    VJ

  • Check status for Shopping Cart to include F-53 postings

    Dear SRM GURUS
    we are following a classic scenarios and SRM version 4.0 where in we create a shopping cart in SRM and a  purchase Req is created in backend and based on that we create a Purchase Order and do a Goods receipts and Invoice Booking in MIRO in R3.
    When we check the status of shopping cart we are able to view all in SRM check status for shopping cart.
    Now my requiremnt is that when after MIRO in R/3 we run F-53  for payement to vendor.
    Whether this can be displayed in the shopping cart check status that as to when actual payement was made to the vendor through F-53.
    regards,
    Nimish Sheth

    F-53  transaction(R/3) status in SRM

  • One Step Workflow Activation for Shopping cart in SRM 7.0

    Dear Experts,
    On working to EXtended Classic Scenario, I need to configure one step approval for shopping cart in SRM 7.0.
    Currently it is providing me Auto Approval  by default and based on it PO is being created. I need one-level manager approval  shopping cart.
    I am working in Demo System of Extended Classic Scenario, I need only one step approval SC without any condition.
    Kindly tell me the configuration steps in SRM and please tell me one more thing is there  any need of  BADI or other coding for one-step approval?
    Thanks in Advance,
    Regards
    Pawan Keshwani
    Edited by: pawankeshwani on May 25, 2011 6:22 PM

    Hi Ashutosh,
    Thanks for quick reply.
    As per your comment when i am tring to activate /SAPSRM/C_SC_600_001_SP04  by t-code SCPR20, But It shows me a information pop up Maintain the client role and then Activation is Cancelled.
    Kindly tell me what i am missing or any other prerequisite step to do for this BC Set Activation.
    Thanks
    Pawan Keshwani

  • SRM 7.0 Modify POWL for shopping cart - Additional Field PR

    Hello,
    in standard POWL for Shopping Cart it is possible to filter Carts with "Order No. from ERP".
    Now we need also to add a new search field for "Purchase Requisition", that the user has both possibilites to filter for backend follow-up documents.
    How could this been done?
    Do we need to copy and change the feeder class for this or can is be done via Customizing?
    I think the problem is, that in table BBP_PDBEI there is only one column for backend-document number (BE_OBJECT_ID) and next to is there is a column that defines the BUS Type, e.g. order or PR.
    Do we need to adjust the feeder class to look in this table for the BE_OBJECT_ID with "BUS2105"?
    Thanks for your help!
    Regards Trevor

    Hi Trevor.
    If you wish to extend the POWL you could use the information in the note 1456308 to perform this extension and what additional extensions need to be added.
    Regards,
    Jason

  • How to use customer extension table for schedule line for shopping cart ?

    Dear Experts,
    One of our client wants to have schedule lines in shopping cart item. I am thinking of using customer extension table at item level for shopping cart. Could you please help me on  how I should proceed with the appending the structures so that the end user can fill the shopping cart schedule line details?
    Which fields should I consider in such cases?
    Thanks and regards,
    Ranjan

    Hi.
    I guess you use SRM 7.0. Please go to IMG.
    SRM -> SRM Server -> Cross-Application Basic Settings -> Extensions and Field Control (Personalization) -> Create Table Extensions and Supply with Data
    Regards,
    Masa

  • Workflow for shopping cart

    Hi experts
    I am in SRM 7.0 and triing to use Process controled workflow, I have done some configurations for shopping cart aproval but no workflow is started and in shopping cart appear as in aproval.
    What cold be missing?
    Thanks
    Nilson

    Hi Guys
    Urgent
    In Sourcing cockpit field having morethan 1000 line item Shopping cart.  Could anyone help me to get the sourcing cockpit shopping cart entire report in a single report.
    We use to download the report morethan on hour on a daily basis.If anyone help me out for this really appriciated.

  • Wrong approver for shopping cart

    Hi Friends,
    I've found something very strange in my SRM system for Shopping cart approveal process.
    One of my SC is waiting for approaval by a approver who is assigned to different plant  and he has got nothing to do with this SC.
    The SC's basic data contains the responsibility  of some other LPR group for which approver is different and he is the actual approver of this SC.
    Can you guys provide some link where i can find documents related to approval process in detail and also the organisation structure material as i am new to SRM..? after providing the solution for above querry...
    Thanks in advance
    ss

    Hi Volkoale,
                    I am also facing the same issue. If you have resolved it kindly post your approach as it will be helpful to the community.
    In my case, there is one  cutomized table that contains list of approvers, but I am yet to debug and find the source of data for this table. Your reply will be rewarded.
    Cheers,
    Kris

  • New document type for shopping cart /PO

    Hi Gurus,
    I have created a new transaction type ZSHC for Shopping carts in SRM. I have given it a new  number range.
    while creating a shopping cart , how do i ensure that my shopping carts get created with this transaction type?
    is there any attribute which controls this ?
    Regards,
    Mangesh

    Thanks Shrini for your response.
    BADI "BBP_CREATE_BE_PO_NEW" does not exist in SRM 4.0. The corresponds BADI in SRM 4.0 is "BBP_CREATE_PO_BACK".
    The documentation of this BADI says that it can be used to change all data TRANSFERRED TO THE BACKEND SYSTEM to create a purchase order.
    I would want the document type to be selected when the PO is created in SRM and not when SRM transfers the PO to the backend. Because in that case I fear that SRM can have one doucment type and R/3 would end up having different document type for same PO.
    I will activate the BADI and keep the thread posted.
    Thanks
    Venkatesh

  • Error during determn of backend follow-on doc. for shopping cart

    I am using Classic Scenario in SRM 4.0 and R/3 ECC5.
    When I am making PO in SOCO against approved shopping cart I am facing following error and PO is not getting created.
    "Error during determn of backend follow-on doc. for shopping cart XXXXXXXXXX"
    I have Checked up following :
    1. Product Cat defined in backend and in Org plan attribute
    2. Object for Prod Cat Vs. PGR defined in SPRO
    3. Doc type in R/3 attribute defiend in BSA attribute of Org Plan.
    Still problem is coming.
    Any clue form some one.
    Sanjay

    Hi Sanjay/Vadim,
    We are also having a simialr issue..
    for SRM server 500 SAPKIBKS08...
    R/3 4.7
    "But this issue comes up only in the Test system and works fine with the Dev sys.." Double checked all the config steps and looks alike..
    We are using the classic scenario RFx process to create a backend PO from the bidding engine after the bid is accepted..
    it alwayz throws up the error SC/ Local Error..
    : Error during determn of backend follow-on doc. for shopping cart 0010000103 / 0000000001....
    we just started debugging from the web by breaking it at META_BAPI_DISPATCH and still looking into it..
    but in the mean while just want to know if this is more a config issue or and RFC connection issue..
    could you forward me any OSS notes if any regarding this issue..
    thanks in advance..
    Regards
    Manoj

  • Attrbute definition for shopping cart creation

    Hi all ,
    I am working on SRM stand alone scenario &  shopping cart need to be created. In org unit or in user the  following needs to be created & asigned .
    Company code,Attributes - ACS,SYS,ITS_DEST,BWA,CUR,BSR,KSA,WRK,PRCAT,KSA.
    Where to create theses & how to assign on org plan
    Regards
    Ayyappan

    Hi
    1. Create Root Org Unit using T-Code PPOCA_BBP. Maintain the mandatory Attributes like ACS, SYS, BUK, BSA etc at root level.
    2. Create the subordinate Org units using T-Code PPOMA_BBP.
    3. Integrate users to any of your subordinate using USERS_GEN, here you give the respective Department OBject ID(in org structure) along with SU01 User Id.
    4. Maintain attributes like Plant, CoCode, Storage Location, product Categories at Department level or at position levels......
    5. Maintain purchasing structure under the root using PPOMA_BBP. Here you create org units for Purchase organizations and purchase groups
    Regards
    Virender Singh

  • Prefered vendor not displayed for shopping cart

    Hi,
    We have PDP scenario, SC's originated from R/3 purchase requisitions,
    Issue details:
    1. P.req was created with desired vendor and transfered to SRM and corresponding shopping cart is available in SOCO.
    2. User created Held PO for corresponding SC.
    3. When user checking monitor shopping cart then preffered vendor not displayed in source of supply tab.
    When i checking BBP_PD for shopping cart, i found there is Disable flag(X) has been set for NO inbox selection partner.
    what could be it mean, and more ever this changs has been originated via RFC user.how it was getting RFC user
    Please advice me....

    Venkateshwar
    SC is generally sent to SOCO only when sourcing has to be carried out for the SC. IN this case you are hving a desired vendor in the SC and then you are creating a pO for the same. Although you have a Vendor in the PO that does not mean that SC will also have same vendor as preferred vendor in SC after you created the PO....
    Regards
    Virender Singh

  • N-step WF for shopping carts

    Is there a N-step WF for shopping carts which can be used in SRM 5.0 ?
    The WF is driven by product category and not spending limits.
    Or do we have to develop a custom WF ?
    Thanks
    -Bakulesh

    Separate Determination Method for List of Approvers via BAdI BBP_WFL_APPROV_BADI in WS14000133:
    In WS14000109 the approvers are determined dependent on the total value of the SC and on the approval limits of the managers.
    However, if you use WS14000133 as an alternative, you can determine the list of approvers flexibly according to your particular requirements.
    You do this using the method GET_REMAING_APPROVERS of BAdI BBP_WFL_APPROV_BADI, with which you can integrate a logic for determining the approvers for each approval step (this can be more than one) and the number of steps in the entire approval process.
    For more details, see the IMG:
    Supplier Relationship Management  ®  SRM Server  ®  Business Add-Ins for Enterprise Buyer (BAdIs)  ®  SAP Business Workflow  ®  Determination of Approvers for n-Step Dynamic Approval Workflow.
    Go through the documentation of the BADI BBP_WFL_APPROV_BADI. It will give you a fair idea on how to about the logic you want.
    Hope this helps!!
    Krishna

  • CFolder Integration for Shopping Cart

    Experts,
    Can we have cFolder integration for Shopping Carts?
    (For example, in single part RFx, in header notes and attachments tab, we see Collaboration -> create/assign/delete buttons).
    If YES:
    what we have to do to achieve this?
    If NO:
    why we cannot see cFolder for SC? Is it because of the reason that, if at an integration has to exist, it should be at item level for SC, and this is always at header level in RFx?
    Details:  SRM7.0 SP07; ECS; PPS.
    Ganapathi
    Edited by: Ganapathi on Apr 23, 2011 11:07 AM

    Hi
    Check below help links
    http://help.sap.com/saphelp_ppm400/helpdata/en/e7/1fc30727cd4ddeb7f6351416ebf591/frameset.htm
    Implementing CFolders
    Implementing cFolder
    Problem between ITS SRM and CFolder
    cFolder + mySRM 4.0
    Re: Collaboration area in SRM
    Re: SUS-MM integration with cFolders
    regards
    Narahari

  • Deadline monitoring for Shopping Cart

    Hi Experts,
    I am working on SRM 7.0 process controlled workflows.
    Activated the deadline monitoring for shopping cart but I am getting the below error:
    Work item 000000073752: Object /SAPSRM/CL_WF_EVENT_ADAPTER method TRIGGER_EVENT cannot be execute
    Please help to solve this.
    Thanks,
    Sangeeta

    Hello,
    To find the cause you will need to debug:
    For testing you can call  the method
    /SAPSRM/CL_WF_EVENT_ADAPTER -> TRIGGER_EVENT
    Take the following parameters from the document wfl log:
    IV_DOCUMENT_GUID IV_DOCUMENT_GUID
    IV_DOCUMENT_TYPE IV_DOCUMENT_TYPE
    IV_EVENT IV_EVENT
    IV_EVENT_SUB_CATEGORY
    IV_WORKITEM_ID
    IV_DOCUMENT_ID
    Before to start debugging, set a beark point in CL_BBP_MESSAGE_CREATE -> execute
    Here you can find why the alert method is not been able to be executed.
    Probably you are passing some wrong parameter.. Do you use Badis BBP_OUTPUT_CHANGE_SF or BBP_ALERT.. try to deactivate these Badis and retest.
    Thanks,
    Melina

Maybe you are looking for