E-mail 'return too' box

Is there any way to automatically fill in the "return to" box in Apple's mail on my MacBook Pro? I could do such a thing on my old laptop using Outlook. I have managed to get the box to appear when I click "New Message', but I have to complete it manually each time I send an e-mail.
I guess it is too much to expect it to fill in the return address depending on the signature I choose!

Press and hold CNTL CMD and press F
Regards,
Captfred

Similar Messages

Mail.app too many Ins and no outs

My Mail.app has never been innocent of odd lapses here and there. As a user with modest demands, I've ignored the less egregious problems. In recent days, my more egregious problems have escalated. My email client downloads messages from the POP server at its own convenience rather than mine, if indeed, it downloads anything at all. I use gmail as my one email account. My messages arrive and are retained in their entirety at the Gmail web site, but most never get downloaded by my Mail.app. My settings are on the money as illustrated by the fact that some messages are downloaded and are stored on my Mail.app In box. My ISP insists they are not a factor in this situation.
While searching for clues, I entered INBOX.mbox, on a whim, in Finder > File > Find and discovered I had five of them scattered around in my ~/Library. All had different numbers of messages (230-163-94-64-59). I have no idea what I did to fracture one In box into five dissimilar mailboxes. I am not nearly competent to know how to reassemble these five files into the original one.
It's been my experience that virtually every tweak and click I administer, unfailing makes matters worse. I need sage advice. I should add that Mail > Mailbox > Rebuild has had zero effect — nothing happened at all.

I'm afraid you're going to have a cow when you read this. After I said I wouldn't do any more stupid things, I did another stupid thing. I read in Gmail help somewhere to be sure I enabled POP, and to click save. What I was reading stated I should Enable POP for all mail (even that's been downloaded).
That was a big mistake, I got 723 messages.
I have another revelation to make that will give you a worse fit. I temporarily moved five folders to Trash from ~/Library > Mail because I thought they might be duplicates. Now I don't know if they're duplicates or not — I've included them here:
Mail copy
Mail
Mail copy
Mail 2
Mail copy 1
Outbox.mbox
[email protected]@mail.gmail.com
MessageSorting.plist
Mailboxes
LSMMap2
DefaultCounts
[email protected]
MessageSorting.plist.backup
[email protected]@pop.gmail.com
[email protected]@pop.mailaka.net
Active.mbox
Brandy.mbox
Deleted Messages.mbox
Outbox.mbox
online sales.mbox
Misc..mbox
Mike Greene.mbox
Mailaka.mbox
Family.mbox
Family
eBay.mbox
MessageUidsAlreadyDownloaded
INBOX.mbox
Deleted Messages.mbox
[email protected]@pop.gmail.com
[email protected]@pop.mailaka.net
MessageSorting.plist.backup
MessageSorting.plist
Mailboxes
INBOX.mbox
INBOX.mbox
INBOX.mbox
Sent Messages.mbox
INBOX.mbox
Susan.mbox
Kath.mbox
Matt.mbox
Ed.mbox
Lisa.mbox
Mailboxes
[email protected]@pop.gmail.com
[email protected]@pop.mailaka.net
MessageSorting.plist.backup
MessageSorting.plist
Deleted Messages.mbox
Sent Messages.mbox
MessageUidsAlreadyDownloaded
INBOX.mbox
Drafts.mbox
Sent Messages.mbox
Deleted Messages.mbox
MessageUidsAlreadyDownloaded
INBOX.mbox
Drafts.mbox
Outbox.mbox
MessageUidsAlreadyDownloaded
INBOX.mbox
Deleted Messages.mbox
When I converted them to List and collapsed the expanded folders, there were reams of stuff I never saw before.
Following is what you specifically requested: MessageSorting.plist.backup
MessageSorting.plist
Mailboxes
[email protected]@pop.gmail.com
Outbox.mbox
Deleted Messages.mbox
MessageUidsAlreadyDownloaded
Deleted Messages.mbox
Drafts.mbox
INBOX.mbox
Sent Messages.mbox.
I noticed another folder: [email protected]@pop.gmail.com
[email protected]@mail.gmail.com
[email protected]@pop.secureserver.net
MessageSorting.plist
Mail copy
[email protected]
MessageSorting.plist.backup
Mailboxes
DefaultCounts
LSMMap2
Deleted Messages.mbox
INBOX.mbox
Sent Messages.mbox
MessageUidsAlreadyDownloaded
Drafts.mbox
MessageSorting.plist
LSMMap2
MessageSorting.plist.backup
Mailboxes
DefaultCounts
[email protected]@mail.gmail.com
[email protected]@mail.piquenique.com
[email protected]@pop.gmail.com
[email protected]
[email protected]
INBOX.mbox
MessageUidsAlreadyDownloaded
Drafts.mbox
Deleted Messages.mbox
Sent Messages.mbox
INBOX.mbox
INBOX.mbox
Deleted Messages.mbox
Family
Active.mbox
Mike Greene.mbox
Mailaka.mbox
Outbox.mbox
Brandy.mbox
eBay.mbox
online sales.mbox
Misc..mbox
Family.mbox
Susan.mbox
Kath.mbox
Lisa.mbox
Ed.mbox
Matt.mbox
I'll understand if you want to wash your hands of this and bid me goodbye. I think a lot of my problem arises when my machine automatically makes duplicates without advising me of this.

While creating a PO in ME21N the return check box is automatically ticked.

Hi SAP Gurus,
I am facing a problem while creating a PO.
Every time I am trying to create a PO in ME21N, the return check box at the Item level of the PO is automatically getting ticked.
The check box can't be unticked even in change mode of the PO.
So all of the PO's with different document types are getting created with the Return check box ticked.
Can you help me to uncheck the Return tab in the Item level.
Please advice if any configuration is required or the code has to be modified.
Thanks in adavance.
Regards
Subhasis

Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards,

Return Check Box in Item Category

Dear Friends
In Item Category Example REN and G2N Return check box is activated what is use and what it affects to sales document.
Thanking You All
Arun

Dear Amitesh,
Whatever you explained me that I know that so why I am asking this question My question is what it affect to sales document and Item Line of sales document. Without this any problem to system?
Kindly Understand my need and give me solutions.
Thanking You for effort
Arun

Mail returns to 'main menu'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. HELP!

Mail returns to 'main menu/desktop'. My mail worked for over a year - now when i enter mail it returns to the 'mail menu' immediately. I disconnected wireless connection and it still returns to the main menu immediately. PLEASE HELP!

- Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Can you access the mail account(s) on another device and look for a problem email that may be causing the problem
- You could try deleting account(s) and recreating them

APERTURE users: how do we send full size images without compression? Mail compresses, Drop Box, all that have a tag "badges" next to JPEG under 'Info' in Aperture compress? What can I do, HELP Please.

In Aperture under INFO at bottom it says Badges; if it has an Icon in the block it compresses JPEG image down to KB? Using mail, using drop box with my Aperture and can't figure out how to get rid of 'Badges with the Icon in the box to be able to send full size. Also have been using: "onOne Software" an add on editing program thats awesome, works as a stand alone, Aperture, & Lightroom.
Bottom Line I can't send to lab my web page, or individule without it compressing. Even created a desk top folder droped & dragged in ZIP & still Compression?

See this link: Aperture 3 User Manual: Understanding Badge Overlays
The badges in the Info panel have nothing to do with compression. The tell you, if your image has keywords attached, if it is a raw or jpeg image, if has been externally edited, or if it is referenced.
When you send an jpeg using mail, you need to set the image size in Mail to "Acual Size", otherwise will Mail compress the image. For example:
If you have really large images, Mail may not be optimal, because the server of the recepient may refuse to accept large Mail attachments. In that case export the image from Aperture in the resolution you want with "File > Export" and compress it as a zip file. That will not reduce the quality.
Send the zipped file, if it is small enough, otherwise upload it to an ftp-server.
The receiver can uncompress it.
Regards
Léonie

My iPhone is going to be remplaced because of a pixel fix. Do I have to return the box with all accessories or juste the iPhone itselves ?

My iPhone is going to be remplaced by Apple soon, will I have to return the box and accesories includes with the iPhone or just the iPhone ? Moreover, will I have an all new iPhone in it package with all accesories ?
Tks !

That is how it is supposed to work. And how it was done
when my 3G was exchanged. If they do give you more
than just an iPhone, are you losing anything? If in doubt,
ask Apple or the store that is replacing your iPhone.
Thank you for the feedback.

Junk mail returns after deleting the item in the "Junk mailbox" and "Trash". Is there a way to permanently block the sender?

Junk mail returns after deleting the item in the "Junk mailbox" and "Trash". Is there a way to permanently block the sender?
I have deleted the item multiple times both on my Mac mini and my touch and 5 minutes later it is back in my Junk mailbox. The item will not return to the Junk mailbox until it is deleted from the trash.

You can create a Rule
http://email.about.com/od/macosxmailtips/qt/How_to_Block_a_Sender_in_Mac_OS_X_Ma il.htm

When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

ITunes Store will not load properly and returns too homepage in seconds

iTunes Store will not load properly and returns too homepage in seconds what do I do too fix it

I am having the same problem now, did you ever find a way to fix it?

How can i get my email to go into the in box instead of all mail or archive box

My incoming e mail does not appear in my inbox but does appear in All Mail or Archive boxes ,.
how can i put this right

Hello!
Please check in the Mail preferences if you have any mail rules activated: "mail > Preferences > Rules"
If so, uncheck the rules and test if your issue is resolved in the future (perhaps by sending yourself a few mails)

Returning Easyserv box?

I called the warranty center a few days ago and opened a case for an x220 with a cracked palmrest from the bending of the expresscard slot, and the top of the monitor is begining to crack. They sent me the box with 30 days to return it, but i have since read some reviews of ezserv and I think Id rather avoid the process. I discovered the parts on ebay and there inexpensive, plus I doubt the standard warranty covers cracks in the plastic. What do i do with the box? ship it back empty to the ezserv center anyway?
Solved!
Go to Solution.

I doubt it's required. Had you sent them your X220 for service, they'd have returned it in another box with no expectation that you'd return that box. I have several of these boxes stacked up in the basement that I've "collected" over the years. No one has ever asked for them back.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Preflight droplet process returns too early – before it's done

I'm calling an Acrobat preflight DROPLET from program that I'm writing, and I need to know when the files are ready, that is when the preflight fixups are done.
I need to know this in order to go on with some other file system stuff in my program, that needs to be done after the preflight fixups.
I guess the droplet just tells Acrobat what to do, and then exits. The Droplet process stays up for a while but exits before the work is done.
There is an question from 2009 asking the exact same thing, but no answer. Preflight droplet returns too early
Since it's in a locked section of the forum I venture to ask the same question now, six years later.
Checking the modified dates of all files does not seem to work since a preflight obviously does not alter files that are not in need of being altered.
I'm on windows, and I don't know whether this is a platform dependent problem.
What should I do?
Thanks,
Andreas

This is not a good way to do it. But this is the way I do it now...
It seems to work but there is no guarantee that it will work in the future, or even on all machines.
private static int WaitForAcrobatReady() {
// Get the current Acrobat instance.
var app = new Acrobat.AcroApp();
// While a preflight (droplet) is running, app.GetNumAVDocs() will
// not return ANYTHING, it will just hang.
return app.GetNumAVDocs();
To sum up the efforts of the last weeks: Acrobat doesn't seem to be made for inclusion in other automation jobs. This is just another thing that doesn't work.
(I had to use the C# library PDFSharp to do other things that Acrobat can do really well only that it's not possible to set those properties, or start that kind of actions, from "outside".)

Preflight droplet returns too early

I want to convert a color PDF into grayscale. So I created a new preflight profile where nothing happens except color fixup:
Advanced > Print Production > Preflight
PDF Fixups > Convert to Grayscale
I saved the profile and created a Droplet named grey.exe.
When I call grey.exe smallSize_1MB.pdf everything is fine. But when I have to convert a PDF having big filesize like grey.exe bigSize_160MB.pdf the Droplet .exe process returns before the preflight is done.
Problems: A script (e.g. a batch file) continues without waiting for the Droplet to finish. So the script cannot make use the Droplet's result, e.g. a preflight report or the converted PDF file.
Why does the Droplet's .exe process return too early? Everybody can test this with the help of the attached Droplet and the following batch scripts:
smallSize.bat (use something small, e.g. 1 MB or smaller):
copy /Y smallSize.pdf tmp.pdf
grey.exe tmp.pdf
echo "return"
pause
bigSize.bat (use something really big, e.g. 160 MB or bigger):
copy /Y bigSize.pdf tmp.pdf
grey.exe tmp.pdf
echo "return"
pause
Ideas, anyone?
Message was edited by: Droptix I am using Adobe Acrobat 8.0 Professional.
Message was edited by: Droptix As an alternative I can imagine to re-produce the Droplet's function by Interapplication communication (IAC) through OLE, see http://www.adobe.com/devnet/acrobat/interapplication.html -> if anyone can tell me how to do a grayscale conversion via IAC/OLE... would be great! I know the IAC/OLE basics, can open, save and edit PDFs but don't know how to convert. It would also be possible to use: Advanced/Print Production/Convert Colors > set all Document Colors to convert > set Blending profile for instance to Gray Gamma 1.8 > set conversion options to don't embed profile.

This is not a good way to do it. But this is the way I do it now...
It seems to work but there is no guarantee that it will work in the future, or even on all machines.
private static int WaitForAcrobatReady() {
// Get the current Acrobat instance.
var app = new Acrobat.AcroApp();
// While a preflight (droplet) is running, app.GetNumAVDocs() will
// not return ANYTHING, it will just hang.
return app.GetNumAVDocs();
To sum up the efforts of the last weeks: Acrobat doesn't seem to be made for inclusion in other automation jobs. This is just another thing that doesn't work.
(I had to use the C# library PDFSharp to do other things that Acrobat can do really well only that it's not possible to set those properties, or start that kind of actions, from "outside".)

ExecuteQueryForObject returned too many results jdbc error

Hi All,
I am getting the following error on running the tomcat 6.0 and I have Oracle 11g installed.
08 Dec 2010 16:23:41 ERROR [QUARTZ_Worker-5] org.quartz.core.JobRunShell - Job DCTM.DCTMServerPipe threw an unhandled Exception:
org.springframework.jdbc.UncategorizedSQLException: SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [null]; error code [0]; Error: executeQueryForObject returned too many results.; nested exception is java.sql.SQLException: Error: executeQueryForObject returned too many results.
     at org.springframework.jdbc.support.SQLStateSQLExceptionTranslator.translate(SQLStateSQLExceptionTranslator.java:121)
     at org.springframework.jdbc.support.SQLErrorCodeSQLExceptionTranslator.translate(SQLErrorCodeSQLExceptionTranslator.java:322)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:212)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:271)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:265)
     at com.emc.documentum.bpm.daos.impl.AbstractIbatisBaseDaoImpl.queryForObject(AbstractIbatisBaseDaoImpl.java:119)
     at com.emc.documentum.bpm.bamengine.daos.impl.ServerConfigDaoImpl.getDBCurrentTime(ServerConfigDaoImpl.java:28)
     at com.emc.documentum.bpm.bamengine.services.server.factory.impl.ServersFactoryImpl.updatePipeServerTimezoneOffset(ServersFactoryImpl.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
     at $Proxy50.updatePipeServerTimezoneOffset(Unknown Source)
     at com.emc.documentum.bpm.bamengine.services.sharedservices.impl.TaskManagerServiceImpl.executePipe(TaskManagerServiceImpl.java:341)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
     at $Proxy52.executePipe(Unknown Source)
     at com.emc.documentum.bpm.bamengine.scheduler.impl.PipeJobImpl.execute(PipeJobImpl.java:17)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:525)
Caused by: java.sql.SQLException: Error: executeQueryForObject returned too many results.
     at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryForObject(MappedStatement.java:124)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:518)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:493)
     at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.queryForObject(SqlMapSessionImpl.java:106)
     at org.springframework.orm.ibatis.SqlMapClientTemplate$1.doInSqlMapClient(SqlMapClientTemplate.java:273)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:209)
     ... 23 more
How can this be resolved? Please help !!
Thanks, T
Edited by: 805903 on Dec 9, 2010 3:00 AM

Error executeQueryForObject returned too many results
Typical Error msg:
“SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [null]; error code [0]; Error: executeQueryForObject returned too many results.; nested exception is java.sql.SQLException: Error: executeQueryForObject returned too many results”
The error is caused for using queryForObject (for a single result) instead of queryForList (when expecting multiple results).
Example of correct solution
In DAO:
public List<UpdatedContractRateDO> getUpdatedCtrctRate(Map paramMap) throws DataAccessException {
return (List<UpdatedContractRateDO>) getSqlMapClientTemplate().queryForList("charge.getUpdatedCtrctRate", paramMap);
}

E-mail 'return too' box

Similar Messages

Maybe you are looking for