E-mail setup for a group to receive and send messages

How is the best way to setup an e-mail account where the Users of this account can send and receive e-mail messages?

Hi DR.
This question itself is a answer.
First: user needs an email address for communication and email mailbox for store mail items
2nd: Exchange server can provide email mailbox
3rd: you need to have domain configured on that exchange server
4th: you need to have Active directory server to control the user account
or,
use the cloud base email services such as yahoo/gmail/hotmail etc
UMESH DEUJA MCP,MCTS,MCSA,CCNA

Similar Messages

  • Way to receive and send Messages.......................

    Hello All!
    Is there a Way to receive and send Messages with attachments From Forms 6i?
    Could you give us one actual example i really cant understand this how to do this through forms?
    Arona

    What kind of messages? If you are referring to email, then if you search this forum, you will find many threads. Here are a few:
    Sending email with a pdf attachment
    email attachment
    Re: CLIENT_OLE2 and Outlook to send an email..

  • I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

    I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4061 How do you change your phone number than is in your iPad and replace it with right one to receive and send messages?

    How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?

    It's best to use an email address on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Why does Mail delay for up to 30 seconds before sending messages?

    This did not  happen in Mountain Lion and it's one of a number of annoying new things I'm encountering in Mavericks.
    Every time I compose an email and hit "Send" the mail goes into the outbox and sits there for a while - sometimes a long while (up to 10 seconds or more) before it gets sent.
    Not only that: I then get a message in "Mail activity" that a much larger number of messages is being sent. Even if I'm only sending one, "Mail activity" tells me that 5, 6, 10  messages are being sent.
    Is anyone else wresting with these really annoying issues in Mail?

    Double-checking all settings is good. Along the way, one thing to try:
    Have a look at your SMTP server settings to see if the port is set to "default" or "custom".  If it is "default" try switching to custom using one of the numbers listed under "default". That fixed it for me on one of my accounts.
    (To do all this:  Mail, Preferences, Accounts, Outgoing Mail Server, Edit SMTP server list, Advanced.)
    charlie

  • Why can't I receive and send messages and emails

    Since updating my iPad to 7.0.3 I am unable to send or receive messages or emails what has happened

    You will probably have to try a reset first: hold down the home button along with the sleep/wake button until you see the apple, then let go. You may still have to go into your settings for email & messaging to re-enter your passwords.

  • J2ME Receiving and Sending Messages

    Hi,
    two questions
    Is it possible to create a message listener that will be called upon receiving ANY MESSAGE (not just from a specific number) ? I want my application to be called, and the user doesn't even know he received a message if I don't alert him.
    Is it possible to create a message listener that will be called upon sending a message? That is before he sends a message, my code will be code called. This can be done to a specific receiver number.
    If yes, can you point me to samples?
    Thanks

    u cant use the messageListner when the app not in use.
    use the pushregistry to open ur application automatically through SMS.

  • Want to find a fitness GPS app that will allow you to receive and send messages and calls while running the app

    I love my blackberry 8900 and have found some cool fitness gps apps that track my distance, etc.  The problem I have is I can't figure out how to access incoming messages or how to send a text message while keeping the app active.  There are pause buttons on the ones I've used, but if I try to get out of the app screen it will log me off the workout completely.  Now granted, I don't do a lot of texting during my workouts (cycling) but still - would be nice to be able to pause it and maybe send something liek "home in a few mins " then continue on with the same workout.

    I figured it out - I programmed my left side button to go straight to my IM program.  I can send and receive messages and go back to my workout without stopping it

  • HT6030 hello I did the mavericks update 10.9.2 but I still have problems with my gmail accounts ... impossible receive and send messages! what can I do please ?.... thanks

    Thanks to help me please

    Thanks for checking in, BDAQua.
    Problem solved.
    In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
    "If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
    The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
    Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
    Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
    So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
    Gratefully,
    tupester

  • I can't receive or send messages in my group.

    I can receive and send messages just fine to individual people, but in the group my messages won't send.
    [12:11:10 PM] System: MSNP: Connection Data (MSNP24):
    * Status: LoggedIn
    * Server Current: BN1MSGR1011310.gateway.messenger.live.com
    * Server Saved: s.gateway.messenger.live.com
    * Login: (UIC)
    * Skypename: -----------------------
    * EPID: 80219fbf-7048-e3ff-e08f-55b87820d1e4
    * ClientVersion: 0/6.20.0.104//
    * OSVersion: Windows 6.1 Service
    * B: 0, T: 0, CFR: 0
    * Time: TZ: UTC-5, Server: 1413306666, Local: 1413306670
    * Recent connect: BN1MSGR1011310.gateway.messenger.live.com @ 2014-10-14T17:07:01Z
    * Recent connect: BN1MSGR1011310.gateway.messenger.live.com @ 2014-10-14T09:10:09Z
    * Recent connect: BN1MSGR1011310.gateway.messenger.live.com @ 2014-10-13T08:14:01Z
    * Recent connect: BN1MSGR1011310.gateway.messenger.live.com @ 2014-10-13T08:13:35Z
    * Recent connect: BN1MSGR1011310.gateway.messenger.live.com @ 2014-10-12T06:29:11Z
    * Push: None (Unregistered)
    I just want to be able to IM people. I already updated IE/re-installed skype. This isn't a problem on my end, it just started breaking randomly. My internet connection is fine and skype isn't broken, as you can tell by the fact that I can still send individual message.
    Solved!
    Go to Solution.

    Hi. Due to the skype customer service system being total and complete astronomical **bleep** my friends and I struggled with this for ages and found some easy fixes and an answer to what we think is wrong.
    First the answer:
    Everyone in your group has to have a fully updated skype, everyone, even on their phones, or laptops or tablets or w/e. Every single person has to be fully updated.
    I won't even start explaining why that's stupid or begin to question why skype, in all their glorious incompetence, didn't force roll this update.
    That being said if you're still having trouble update internet explorer, because skype is dependent on outdated, unused, insecure technology.
    The reason:
    As far as I can tell skype switched recently how they control chat rooms with multiple people in it. I believe originally skype would randomly choose a host and a co-host (not the ones assigned as roles in the room). 
    When skype released their most recent update they changed their groups from being ran by your peers (the host and cohost) to being cloud hosted. This means that if not everyone is updated some people are referencing the cloud chat, some people are referencing the regular chat. 
    These skype roles are invisible to the users and if one (or maybe both) are not updated then the skype group won't work.
    This is just a guess based on what I've observed. I don't care enough about skype to properly research it but 
    TLDR: Everyone in the group must be fully updated ON CREATION OF THE GROUP.
    Seriously how many programmers does it take to write a group message room, basically my high school computer science final project.

  • Unable to configure Mail setup for SMTP : Please Help

    Hi experts,
                 I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
              Couls anyone help me please,
    Challenge: I want to send mails from SAP system to other internet servers or mail servers.
                    SMTP server is installed,
                     SAP R/3 4.7ee is in place.
    I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
    Thanks in advance,
    Sunil

    Hi Juan, Hi Juan,
                 Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
    Under INTERNET settings
    address area = *mail
    have not mentiond RFC destination.
    Hope this info will guide you my issue.
    Thanks in advance,
    Sunil

  • Mine is Yahoo where POP is used .TB is IMAP . i can receive and send mails , but when making action on TB (Del or send) no reflection on main server

    Hello there,
    My e-mail is Yahoo, and Yahoo by default is POP user .
    I understood from your help file that synchronization is compatible only with IMAP mail provider
    I can receive and send mails from TB , but when making action on TB (Del or send) no reflection on main server, same when make the action on the main server (Del or send), no change on TB
    from yahoo help I managed to find configuration for IMAP , but could not apply them on TB , as TB have already Yahoo as POP in the configuration list
    please your help on this
    best regards
    Mohamad

    You cannot convert an existing account, but you can set up your Yahoo account as IMAP in parallel to the existing POP account. See
    http://kb.mozillazine.org/Convert_a_POP_account_to_a_IMAP_account

  • My iphone 5 for some reason can receive calls, send & receive texts but can not call out

    My iphone 5 for some reason can receive calls, send & receive texts but can not call out

    I am not sure if this issue is going to help you but lets give it a try.
    I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
    As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using.

  • How to create a dynamic menu for each group of responsibility and  user

    Hi
    I am using Jdev 11.1.1.6 and new to ADF, my application require to populate menu which would be different for different groups of user, and the user in each group would have different submenu depends on their responsibilities assigned to each one of them.
    so on the top level would be menu_top_item1, menue_top_item2
    |-->submenu1_1 |-->submenu2_1
    |-->submenu1_2 |-->submenu2_2
    also the menu would need to be on_mouse_over to show the submenu items or collapsed back.
    any idea what would be the best approch? or is there any example around?
    thanks a lot

    You can use ADF Security to control access to menu options.
    More about ADF Security here:
    http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/AdfSecurity/AdfSecurity.html
    If you also use WebCenter you might use their menuing option:
    https://blogs.oracle.com/shay/entry/webcenter_portal_intro_for_adf

  • How do I set up a POP account that links to my business email account for both receiving and sending

    How do I set up a POP account that links my icloud email to my business email account for both receiving and sending?

    Can you post your Troubleshooting Information?
    Help (Alt-H) - Troubleshooting Information

Maybe you are looking for