E-mail setup launching of its own accord

I'm using a Nokia X6 and ever since Orange merged with T-Mobile, the E-mail setup wizard has been launching of its own accord asking me to allow the application to use network to send or recieve data, I hit No and it goes away, but the wizard will keep launching.
It only seems to launch when the phone is locked and if I go in and out of signal.
Some help would be appreciated.
Thanks.

Any help? It's quite a pain. I've tried restarting, but that hasn't fixed it.

Similar Messages

  • ITunes Mac launches on its own - interferes with Magicjack and Airport

    I have a headless Mac Mini 2010 which I occasionally hook up to my HD-TV that occasionally will launch on its own iTunes a short period after boot. Temporarily I've had to stop this action by compressing the application into an archive.   We are running Mac OS X 10.6.8.  As soon as iTunes launches, the airport connection from the Mac Mini disappears, and the Magicjack software goes in the background and my Magicjack connection then dies.  It happens at random, and I can't figure out why.  
    I upgraded to Airport firmware 7.6 on my Airport Extreme base station, and that didn't help.  But it seems it stays connected always when there is a keyboard connected, but once I remove it, that connection dies after a few calls.  Zapping the PRAM may have helped for now, and then immediately after removing the keyboard and mouse.   Lately it is working fine, so I don't want to mess with it, but anyone know why iTunes would launch on its own even when the helper is not listed in the Login Items?
    When I've played around with it, the Airport won't accept my WPA2 password on the Mac  Mini even though I'm careful with the password case, and username, and other computers on the airport are working fine.  And yes, I disabled all the Bluetooth settings for looking for a keyboard when it is not connected, and the iTunes launching still happens.  I would like to leave iTunes unarchived on the machine so I can use the iTunes sharing to connect to my HDTV occasionally since my original AppleTV doesn't work reliably with it either.  I only want to connect a keyboard and mouse when I connect to my HDTV, but then otherwise leave those disconnected and it not interfere with my Magicjack.
    If someone can help me find a way to leave iTunes unarchived, while keeping my Magicjack always up, and my Airport connection never dying that would be great!   Thank you.

    Upeace, it's so long ago I can't remember now… But I do know that my newer MBP's volume can be affected by someone tinkering with the Apple TV remote. Is that a possibility? If so you can turn this off in System Preferences. It's not at all easy to find though—you have to go into 'Security Privacy > Firewall > Advanced' and then tick 'Disable remote control infrared receiver'.

  • ITunes 8.1 launching on its own repeatedly

    I have yet to see anything recent on this, so I'm asking here.
    Since upgrading to iTunes 8.1, I have noticed it will launch without provocation. I have set Podcasts to update Manually. I do not appear to have any iTunes clients running in the background. I have not attached any iPod or iPhone device to the Mac. It seems no matter what I do, iTunes will launch on its own. Feature? Bug?
    Would two users running iTunes Helpers cause any problems? I just logged out a user account that had a second iTunes Helper running. I'm not sure if that will help.

    I should note that a reboot cleared up the issue. It might have something to do with two instances of iTunes Helper running at the same time. Also, my wife and I have separate active logins on this iMac most of the time. I will try to recreate the problem, but for now, it's "fixed."

  • Mail shuts down on its own

    Seems like mail is shutting down on its own several times a day.  Any one have this problem

    Other people have had the same problem. See this thread:
    https://discussions.apple.com/message/17337738#17337738
    Be sure to quit Mail before moving or deleting any Mail-related Library files!
    I'd also advise having a recent backup before moving/deleting any Library files.
    As you may know, your user Library is hidden. To see it: in the Finder, hold down the Option key and, under the Go menu, choose Library.
    Note that the advice in that thread is from OS X 10.5. Things are in different places now, plus you probably have more than one file called Envelope Index (with different suffixes).
    Your Envelope Indexes are now in YourUserLibrary/Mail/V2/MailData
    Mail's caches are now in YourUserLibrary/Containers/com.apple.mail/Data/Library/Caches
    You might want to try either the Envelope Indexes or caches first, not both at the same time, in case the problem is only with one.
    If you do as advised in that thread, Mail will re-create your Envelope Indexes and/or caches (you'll have to "import" all your messages, which is just Envelope Index re-creating its index). If all works well after that, you can then remove the old caches and/or Envelope Indexes.
    Please let me know....

  • Apache continually attempting to launch on its own

    I had been trying to get Web Services to launch, and it continually fails to do so. I went and checked the logs, and have the following repeating itself over and over.
    7/22/09 2:05:43 PM org.apache.httpd[29752] (2)No such file or directory: httpd: could not open error log file /var/log/apache2/error_log.
    7/22/09 2:05:43 PM org.apache.httpd[29752] Unable to open logs
    7/22/09 2:05:43 PM com.apple.launchd[1] (org.apache.httpd[29752]) Exited with exit code: 1
    7/22/09 2:05:43 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 10 seconds
    7/22/09 2:05:50 PM com.apple.wikid[29753] Traceback (most recent call last):
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/bin/twistd", line 21, in <module>
    7/22/09 2:05:50 PM com.apple.wikid[29753] run()
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 27, in run
    7/22/09 2:05:50 PM com.apple.wikid[29753] app.run(runApp, ServerOptions)
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 379, in run
    7/22/09 2:05:50 PM com.apple.wikid[29753] runApp(config)
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 23, in runApp
    7/22/09 2:05:50 PM com.apple.wikid[29753] _SomeApplicationRunner(config).run()
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 156, in run
    7/22/09 2:05:50 PM com.apple.wikid[29753] self.preApplication()
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 203, in preApplication
    7/22/09 2:05:50 PM com.apple.wikid[29753] self.config['prefix'], self.config['nodaemon'])
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 113, in startLogging
    7/22/09 2:05:50 PM com.apple.wikid[29753] logFile = app.getLogFile(logfilename or 'twistd.log')
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 410, in getLogFile
    7/22/09 2:05:50 PM com.apple.wikid[29753] os.path.dirname(logPath))
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/python/logfile.py", line 113, in _init_
    7/22/09 2:05:50 PM com.apple.wikid[29753] BaseLogFile._init_(self, name, directory, defaultMode)
    7/22/09 2:05:50 PM com.apple.wikid[29753] File "/usr/share/caldavd/lib/python/twisted/python/logfile.py", line 26, in _init_
    7/22/09 2:05:50 PM com.apple.wikid[29753] assert os.path.isdir(self.directory)
    7/22/09 2:05:50 PM com.apple.wikid[29753] AssertionError
    7/22/09 2:05:50 PM com.apple.launchd[1] (com.apple.wikid[29753]) Exited with exit code: 1
    7/22/09 2:05:50 PM com.apple.launchd[1] (com.apple.wikid) Throttling respawn: Will start in 10 seconds
    7/22/09 2:05:53 PM org.apache.httpd[29754] (2)No such file or directory: httpd: could not open error log file /var/log/apache2/error_log.
    7/22/09 2:05:53 PM org.apache.httpd[29754] Unable to open logs
    Why is this running? I have removed Web Services from the Administration services and have rebooted. I just don't know how to stop this process.

    I am only somewhat familiar with using the terminal, so I am not sure what the "la -la" command is, but it would not be accepted, as you can see by the transcript below. I think I got the gist of what to do, so I used the ls -l command, and got the following:
    fileserver:~ matt$ la -la /private/var/log/apache2
    -bash: la: command not found
    fileserver:~ matt$ ls -l /private/var/log/apache2
    ls: /private/var/log/apache2: No such file or directory
    fileserver:~ matt$ ls -l /private/var/log
    total 46328
    -rw-r--r-- 1 root wheel 1474 Jul 21 17:52 SerialNumberSupport.log
    -rw-r--r-- 1 root wheel 0 Jun 3 20:59 alf.log
    drwxr-xr-x 11 root wheel 374 Jul 22 17:10 asl
    drwxr-xr-x 5 root wheel 170 Jul 18 03:57 cups
    -rw-r--r-- 1 root wheel 83035 Jul 22 03:15 daily.out
    -rw-r--r-- 1 root wheel 7920 Jul 22 03:15 diskspacemonitor.log
    -rw-r--r-- 1 root wheel 50222 Jul 22 12:37 fsck_hfs.log
    -rw-r--r-- 1 root wheel 11596 Jul 21 17:45 hwmond.log
    -rw-r----- 1 root admin 61558 Jul 22 05:46 install.log
    -rw-r----- 1 root admin 10092 Jul 11 20:00 install.log.0.bz2
    -rw-r----- 1 root admin 16010 Jul 3 12:00 install.log.1.bz2
    -rw-r----- 1 root admin 1800 Jul 21 17:45 ipfw.log
    -rw-r--r-- 1 root wheel 172 Jul 1 05:30 monthly.out
    -rw------- 1 root admin 78321 Jul 21 17:58 secure.log
    -rw-r--r-- 1 root wheel 1461 Jul 21 17:45 servermgrd.log
    -rw-r----- 1 root admin 18021220 Jul 22 17:11 system.log
    -rw-r----- 1 root admin 667461 Jul 22 00:00 system.log.0.bz2
    -rw-r----- 1 root admin 711604 Jul 21 00:00 system.log.1.bz2
    -rw-r----- 1 root admin 644072 Jul 20 00:00 system.log.2.bz2
    -rw-r----- 1 root admin 645493 Jul 19 00:00 system.log.3.bz2
    -rw-r----- 1 root admin 645261 Jul 18 00:00 system.log.4.bz2
    -rw-r----- 1 root admin 645369 Jul 17 00:00 system.log.5.bz2
    -rw-r----- 1 root admin 648227 Jul 16 00:00 system.log.6.bz2
    -rw-r----- 1 root admin 652358 Jul 15 00:00 system.log.7.bz2
    -rw-r--r-- 1 root wheel 1946 Jul 18 03:16 weekly.out
    -rw-r----- 1 root admin 65462 Jul 22 14:30 windowserver.log
    fileserver:~ matt$
    So there is no apache2 directory, not any corresponding log files. Now I had done a clean install of the OS about a month ago, and I am pretty sure I have not deleted any files.
    The only apache2 directories I have are located under /etc and /libexec.

  • Mail service quits on its own

    Hello,
    The mail service on my server is turning itself off automatically. I can turn it back on and for a few moments it will run, but them it shuts-off. The System log is awash with messages relating to postfix and dovecot, but I can't understand what they mean. Is there something, specific, I should be looking for in the logs? I know the logs are a key component in troublshooting, but I am just unsure what to look for. Also, clients cannot make IMAP connections to the server, SMTP is working fine.
    Any thoughts would be greatly appreciated.
    Thanks

    There is a whole bunch of these messages. The Mail server is currently off at the time these messages are logged.
    3/13/14 10:24:38.189 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94048]) Exited with code: 89
    3/13/14 10:24:38.189 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:24:46.644 AM netbiosd[200]: name servers down?
    3/13/14 10:24:48.261 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94052]) Exited with code: 89
    3/13/14 10:24:48.261 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:24:58.332 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94058]) Exited with code: 89
    3/13/14 10:24:58.332 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:25:08.402 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94065]) Exited with code: 89
    3/13/14 10:25:08.402 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:25:18.474 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94068]) Exited with code: 89
    3/13/14 10:25:18.474 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:25:28.549 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94073]) Exited with code: 89
    3/13/14 10:25:28.549 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:25:38.626 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94080]) Exited with code: 89
    3/13/14 10:25:38.626 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:25:48.696 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94086]) Exited with code: 89
    3/13/14 10:25:48.696 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:25:58.767 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94089]) Exited with code: 89
    3/13/14 10:25:58.767 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:26:08.838 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94092]) Exited with code: 89
    3/13/14 10:26:08.838 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:26:18.909 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94095]) Exited with code: 89
    3/13/14 10:26:18.909 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:26:28.979 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94103]) Exited with code: 89
    3/13/14 10:26:28.979 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:26:39.050 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94106]) Exited with code: 89
    3/13/14 10:26:39.050 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:26:46.645 AM netbiosd[200]: name servers down?
    3/13/14 10:26:49.121 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94109]) Exited with code: 89
    3/13/14 10:26:49.121 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds
    3/13/14 10:26:59.202 AM com.apple.launchd[1]: (org.dovecot.dovecotd[94112]) Exited with code: 89
    3/13/14 10:26:59.202 AM com.apple.launchd[1]: (org.dovecot.dovecotd) Throttling respawn: Will start in 10 seconds

  • How do I stop iChat from launching on its own?

    This is weird. I have three computers connected over a home network and connected to the net by a DSL modem.
    iChat (4.0.2) is installed on all three.
    Last night, it was turned off on all three.
    This morning I wake to find that iChat has launched on my laptop, is chirping away and showing that window saying AOL has me logged in on two systems at once.
    What gives?
    Bob

    Hi,
    Check the System Preferences > Accounts > Your Account > Login Items.
    This will list the apps that start up when the Mac does.
    If you mean that waking the Mac from sleep shows an attempt to receive an IM when Off line then it is possible. In certain circumstances iChat does seem to do this.
    In the General Section of iChat> Preferences makes sure it is set to Log out when iChat is Quit. This setting otherwise only partially logs you out and can be responsible for the Double/two place Login message.
    Also check whether each computer if using the same AIM screen name has it set to Allow Multiple Logins. (this is one way to stop the message).
    If you want to use the Message you get to log another computer out of AIM then type "1" as a response to it (or 2). Typing "1" will log the first computer that was logged in (or not fully logged out) off line. Typing "2" is likely to log the machine you are using Off Line (for iChat/AIM). It can be useful to check which is which.
    The same message will appear if there are two apps on the same computer that are logged in (or not fully logged out) with AIM.
    If you are getting Off Line messages then you should also get a AIMSysMessage item saying if you want to continue with this and you should have an option to Stop it. (I am not sure there is a way in iChat to restart it)
    9:49 PM Monday; April 28, 2008

  • Firefox shuts down of its own accord when I haven't touched the pc for some time, usually overnight.

    As above. When I restart Firefox it always opens in the same position on the monitor and the same size window even though that wasn't the last position/size as when I left it.
    This is not a crash, it just disappears.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Mail Is Zipping On Its Own

    I am running Mail 4.3 under System 10.6.4. I've noticed that if I select a folder as an attachment, Mail is automatically zipping the folder when it sends it. If I attach a single file this does not happen. It also does not happen if I attach several files by selecting them individually. Just to a folder. Is there a setting somewhere in Mail that controls this behavior? The reason I ask is that some recipents cannot handle a zipped file or folder.
    Thanks,
    Bob

    Most ISP will block sizes more than 10 MB (25 in Google email) . Sending large files need something like either DropBox, CloudApp or PogoPlug.

  • FF downloaded. opens but after 30secs closes down of its own accord.

    The latest version of Firefox is installed.
    I can open it without a problem but after about 30 seconds it closes down.
    When I try to reopen nothing happens.
    The trouble shooting "auto Add" does not work and I cannot do it manually because I cannot open FF

    Hi missouri75,
    Are you still facing this issue?
    Have you tried to create a new user profile and test again. If not, you may try it.  Have you tried to install latest updates for Acrobat.
    You may also try repair disk permission in safe mode.:  http://support.apple.com/kb/HT1564?viewlocale=en_US     Repair disk permission: Repair Disk Permissions and Repair Disk - Battle.net Support
    Regards,
    Tariq Ahmad.

  • Imac G5 shutting down of its own accord

    now I know the first thing you will say is check your system settings but I have, have taken off all energy saving functions etc.
    I switch on my machine and read emails etc, sometimes open Quark/Photoshop ready to start work, then go away for an hour (school run etc), when I come back it has shut down, I have not seen it doing it so can't say if it comes up with an error message but when I restart I get no error messages at all, and all works fine, have no other problems. It has only started doing it over the last week and I'm stuck as to what to do to fix the problem can anyone help?
    Cheers

    If, in Console, you see messages about maximum temperature exceeded for 30 seconds, you have a thermal problem, either a failing Power Supply Unit, dried thermal paste, bulging or leaking caps or a bad connection.
    Plenty of choices, you can open your machine and look to see if any of the caps is leaking or swollen, you can also clean all the dust out of the machine and make sure the fans and air vents are clean.
    Then reset your SMU:
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Press and hold the power button for 5 seconds.
    4. Release the power button.
    5. Attach the computers power cable.
    6. Press the power button to turn on the computer.
    After that, reset the PRAM and please post back and let us know how things went.
    It would also help if you would list the exact model of G5 iMac you have.

  • Since loading IOS6.1 on my 4 it is constantly shutting down of its own accord

    Since loading IOS6.1 my iphone 4 keeps on shutting down

    If, in Console, you see messages about maximum temperature exceeded for 30 seconds, you have a thermal problem, either a failing Power Supply Unit, dried thermal paste, bulging or leaking caps or a bad connection.
    Plenty of choices, you can open your machine and look to see if any of the caps is leaking or swollen, you can also clean all the dust out of the machine and make sure the fans and air vents are clean.
    Then reset your SMU:
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Press and hold the power button for 5 seconds.
    4. Release the power button.
    5. Attach the computers power cable.
    6. Press the power button to turn on the computer.
    After that, reset the PRAM and please post back and let us know how things went.
    It would also help if you would list the exact model of G5 iMac you have.

  • My Macbook Pro constantly disables fonts of its own accord. Anybody know a fix?

    For example every few days Avenir (and others) get disabled and I have to re-enable them in Font Book to use.
    I'm on Mountain Lion 10.8.2

    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
    Mac 101: Font Book

  • IPad 2 plays music on its own. When I shift my backpack, ipod ap launches

    A few minutes after I put my iPad 2 in my backpack, or if I shift my backpack, my ipod ap launches on its own and music starts to play. Sometimes, I can just touch the bag and the ap launches, this, despite the fact that I have the magnetic cover on and closed. I usually then put my iPad 2, with its magnetic cover closed, in the Hand Candy padded case I bought for greater protection because I have to put my pack, and the iPad 2 separately, through a security screening to enter my place of work. The backpack has plenty of room and, in fact, is nearly empty. I put the ipod in the padded section, again, for protection.
    Still, often when I shift the pack or bend down with the pack on or pick up the pack from a chair, the iPad 2 launches the ipod ap and the music start to play.
    I've tried touching and lightly pressing the iPad 2 in various places on the outside to see if I could replicate the auto music shut on, but that doesn't work. It won't come on by just touching the outside of the case with the magnetic cover closed.
    It only happens when I put the padded case into my backpack and shift the pack to my back, or when I take off  the pack to put it on my desk or pick it up. That's when the music starts.
    I don't get it. It's not like my pack is stuffed or that that I have the iPad pressed against anything.
    Is it haunted?
    Anyone else have this experience?
    Does anyone have a solution?
    Help!

    There are small magnets in the mic, but you are correct they shouldn't do it.
    Try separating them anyway.
    If you haven't already, try restarting the iPad: To restart (reboot) Press and Hold the Home and Power buttons until the Apple Logo appears, about 10 seconds.
    Also, you can turn the iPad off, instead of just putting it to sleep. Not a permanent fix, but a workaround until it's figured out.
    Anyone else have a tip for RD ??

  • HT201320 ipod mail setup for t-online

    I am trying to set up my mail account for Deutsche telekom (t-online.de). But when I enter all the data my ipod tells me that the mails cannot be received: user name or password for secureimap.t-online.de is not correct". An I don't know why... Any ideas?

    I reply to this question even it is over one year old since I had the same problems recently. I described how I solved it in German in this article:ios 7 E-Mail-Client mit T-Online. In short the trick is to set an extra password for external email clients (like Outlook or the Apple email client) in the menue of the email center ("E-Mail-Center"), which has its own password - the same as that for the customer center ("Kundencenter").
    Set the SSL-decryption setting to "on". Use the following ports:
    inbox server: secureimap.t-online.de, Port: 993, safety: SSL/TLS,
    outbox server: securesmtp.t-online.de, Port: 587, safety: SSL/TLS.
    These settings should be found automatically during the setup of the email account.
    And I recommend to set the storage time for emails in the email center from 90 days (default) to "never delete".

Maybe you are looking for

  • A way to get information about colored points from a graph?

    Two questions: 1. Is there a possibility to know whether a specific point is already plotted in a graph and what is the color of that specific point? 2. Is there a way to use the legend in order to show what each colored point represents (not lines,

  • I ran a hardware test and this was my error

    I ran a hardware test and this was my error#4MEM/40/40000006:B:1 C:0 R:1 - what does it mean?

  • Can we define a list of mac-addresses for a ssid?

    I believe the controller can do this, but can not figure out the details how to configure it..     ACL?

  • Constants or properties file - best practice question

    Hi, My application has a number of values that will be used in different classes throughout my project. For example, I perform a check against the max allowed length of an ID in numerous places in my code. Therefore, it makes sense to set this value

  • Java proxy in PI7.1.....

    Hi All, I am having a requirement where i have to develop JAVA proxy in PI 7.1 and for this I am using NWDS 7.1 but the main concern is that i am very new to JAVA proxies. Even though i refer SDN but the blogs and forums mentioned are related to XI3.