E-mail to the recovery user name does not come

e-mail to the recovery user name does not come
what i do?
I'm sorry for the mistakes i am polish

The employer should be setting its Macs up with corporate Apple IDs and corporate volume licesnses for the software. Individual employees personal IDs do not provide the Licensed Copy End User License Agreement that the Macs need in a business evironment. Your personal Apple ID only carries a consumer license and by law any of your own apps that you install on the Mac will it is in your control would need to be removed when you turn the Mac back over to the company.
When a Mac is first set up the original Apple ID is always going to be associated with that Mac, its installed version of OS X and the preinstalled iLife apps. And only that ID can update the iLife apps if they were properly accepted into the Apple ID*. But you should be able to sign out of the active Apple ID in the Store menu of both the iTunes App and the Mac App Store app, then sign into your Apple ID to install any of your own content that you wish to have on the Mac.
*If the iLife apps were not correctly accepted into the setup Apple ID, then they cannot be updated and no one can buy them again on that Mac with any Apple ID.

Similar Messages

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

My user name does not show in finder

I recently had to do a re-install of OS X Yosemite on my brand new Macbook Pro due to some files being corrupt during the transfer of my aperture and iTunes librarys from my old iMac to the new Macbook. (Aperture appears to be the problem)
After the re-install everything appeared as a new computer. After signing in to my accounts, I went to "Finder" to open my username and music file to transfer my iTunes library over. My user name does not appear at all in the Finder sidebar. Have doing something wrong here.

You can customize your Finder sidebar to show whatever you want. Some of the defaults (including the home folder you're talking about) are available by going to Finder menu - Preferences - Sidebar. You can add others by dragging them from the right side of the Finder window into the sidebar.
Matt

How to fix xcodebuild error: The directory /Users/SmilingTornado/ does not contain an Xcode Project

I am trying to fix my bash but the error: "xcodebuild error: The directory /Users/SmilingTornado/ does not contain an Xcode Project" means that I cant continue to recompile my bash so I have not started the process of patching yet

OS X bash Update 1.0 – OS X Mavericks

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
1. Take off bottom case
2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
3. Press and hold power button for 5 seconds
4. Plug a charger in, and it should start booting up
5. After shutting down again, reconnect the battery and close the case up
6. It works! (hopefully, if you guys had the same situation I did)

One of the user names does not show up on the login screen

There are two admin accounts set up on the computer but only one of them shows up on the login screen. Any ideas why and how to change it?
Thanks a lot.
Tomek

Thank you for the reply, but it does not work for me. I have no clue why.

When i plug my itouch into my computeri get a pop-up that says "this ipod cannot be used because the apple mobile device service is not started." and when i plug it it my itouch name does not come up on my itunes, how do i start it and fix this?

When I plug my iPod Touch 4g into my computer I get a pop-up that says "This iPod cannot be used because the Apple Mobile Device service is not started." And when I plug in my iTouch the name of the iTouch does not come up on my iTunes. How do I start the Apple Mobile Device? How do I fix this?

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Rescue & Recovery user interface does not open

I am using T400, few days ago, I used Rescue and Recovery program to make back up system, I wanted to save back up to external hard drive but I had put the location is C:\, after that I managed to cancel the process to modify the location in Preference of Rescue and Recovery program, but the process does not stop as I expected. Then, I used Task manager to stop the program, easily the program stop after few seconds. But from this time to now, when I start the program, the interface of program does not appear on screen, I try many ways to open it but all fail. I check in Task manager, the program running in a moment then it automatically end and disapear from task manager.
If anyone faced with this problem, please help me fix this. Thank you so much.

Uninstall then reinstall RNR. RNR does not like to be cancelled via task manager.... this creates a mess.
Reinstall may also fix your issue with productivity center..

OUI-10182 - The effective user ID does not match

Hi guys,
I tried searching for this error first but couldn't find anything. The install guide says to runInstaller as oracle user so I moved the database folder in to my oracle folder, logged in and ran the installer. At the install product stage I receive this error:
OUI-10182 - Th e effective user ID does not match the owner of the file, or the process is not the super-user, the system indicates that super-user privilege is required.
I get the same error when logged in as oracle and running the install folder from my own user account
Thanks a lot
Mike.

Hi Orion, your method worked and everything seemed to install but at database configuration I get this:
INS-20802 - Oracle Net Configuration Assisstant failed
Cause - The plug-in failed in its perform method Action - Refer to the logs or contact Oracle Support Services. Log File Location
/u01/app/oraInventory/logs/installActions2011-02-20_06-54-09PM.log
Here is some of the log file:
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Parsing command line arguments:
INFO: Parameter "orahome" = /u01/app/oracle/product/11.2.0/db_1
INFO: Parameter "orahnam" = OraDb11g_home1
INFO: Parameter "instype" = typical
INFO: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Parameter "insprtcl" = tcp
INFO: Parameter "cfg" = local
INFO: Parameter "authadp" = NO_VALUE
INFO: Parameter "responsefile" = /u01/app/oracle/product/11.2.0/db_1/network/install/netca_typ.rsp
INFO: Parameter "silent" = true
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0xa2e3b35e, pid=9903, tid=3086489808
INFO: #
INFO: # Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c35e]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid9903.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING: /u01/app/oracle/product/11.2.0/db_1/bin/netca: line 178: 9903 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.net.ca.NetCA $*
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant

In my aperture the camera file name does not show under the photo how do I get it to show

In my aperature dislay the camera file number does not show how do I get it to show

Where exactly is the filename missing? Aperture has plenty of places to display metadata.
You configure and enable the display of metadata by defining Metadata presets. One place todo this is the little baggage label icon below the browser:
Press the icon,enable the display of metadata overlays for Browser and Viewer, then press "Edit" to customize the display of the tags you want to be displayed.
-- Léonie

Report Name does not come when converted to HTML format.

We are using Report Builder 10.1.2.3.0 to convert a .rep file to HTML. We need the HTML output file to feed to a reports to xls converter.
Problem is, the html output does not have the report name. Report name (and also date, time. user, page etc.) are in the margin section. For some reason, it wont print the report name in the html. It works fine when I run it in the builder.
Here is a graphic of the actual outputs: http://postimage.org/image/uio1x32gt/
Why is this??? The property palette for a label that is printing in all pages (like Date ) is the same as for the report name (GL EXTRACT DETAIL REPORT), BUT it does not appear in the HTML output???
Any help would be greatly appreciated.
PS: We use rwrun.exe with desformat=HTML.

amitphynyl wrote:
hi,
have you tried another label for the header of your report.Hi Amit, I tried that, and you are right.
I created a simple text boilerplate in the margin , on top of the report name. And when we generate the HTML it comes in every page properly.
The property palettes of the 2 texts are EXACTLY the SAME.
So why doesn't the old text (with report name) does NOT appear and ONLY the new text appear????
Cos, we are trying to generate an MS Excel version of every report. For this, we use a tool called rep2excel, and it users as in input an HTML file. So, we have to generate the HTML from the rep and feed it to that.
So, since we have 200 odd reports, we will have to change all of them, that is why.
Here is the output (HTML file): http://www.freeimagehosting.net/newuploads/dgrip.gif

When trying to turn on the icon jumps but does not come on. It quit when trying to install update.

We are unable to access firefox. It does not come on when you key on the menu bar

Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

What are the NEW features what comes with the iPhone 6, what does not come with any other iphone?

I just bought an iphone 6, and i was wondering what NEW features the iphone 6 has what does not come of the other iphones?

Click here for information.
(117357)

I am unable to remove imported photos from the iPad. The red delete button does not come up and synching did not help. Any ideas

I am unable to delete photos that have been imported from a camera. The red delete button does not appear and synching with the photos ticked and then unticked does not work either. I have also tried attaching the iPad to the PC and looking for the photos using windows file management. However the only photos that I can find are those taken by the iPad itself. I am confused about why something that should be simple is not.

If photos were synced from your computer then they can't be deleted directly on the iPad, you will need to remove/de-select them from where you synced it from on your computer and re-sync.
http://support.apple.com/kb/HT4236

Default signature (the default cursive name) does not display on executed PDF

When I and my client e-sign a document with our default signatures (the default cursive name), none of our signatures displays on the executed (e-signed by both of us) PDF. However if I and/or client upload an image for our signatures and use it for our profile to e-sign the document, it does show up on the executed PDF.
The problem is I can’t ask everyone to upload an image of their signatures. The default signature (cursive name should show up on executed PDF. Any idea why it doesn’t or how to fix it?
Thanks for your help in advance.

Similar problem. The cursive signature and date stamp appear in Acrobat Pro, but not in Preview. I tried to sign in Preview Document Mode, as suggested elsewhere, and that did not work. This is a preloaded signature I'm working with. It worked on my first attempt when I created the signature. Perhaps that's the only thing that works.

E-mail to the recovery user name does not come

Similar Messages

Maybe you are looking for