E-MU Proteus X, Sonar 4 and Project 5 do they get along

i'm thinking about updating my soundcard since i think it died or is dying (MIA - may you rest in peace). anyway, i'm looking at buying the E-MU Proteus X which comes with the 0404 soundcard.
now, does anyone know if this will be a problem with Sonar 4 and Project 5?
i'm running a p4 3.2ghz, 1g ram, win xp sp2, but i have this soundcard on the board (SoundMax).
any help out there? any experiences bad or good with this type of setup?
much appreciated.
steve

Arne,
Don't feel so bad about this. You're not alone in experiencing such indifferent support. AMD, the owner of ATi, is even rougher than Nvidia when it comes to support of older GPUs: AMD has ceased further driver releases for all of its GPUs older than the HD 2xxx series except for critical compatibility fixes (the so-called "legacy support" status), beginning with the Catalyst 9.4 drivers (which pre-date the release of Windows 7).
By the way, if you don't perform any tweaking or hacking (software-wise), the only Nvidia GPUs that are certified to run in GPU-accelerated mode in CS5.5 are:
GeForce GTX 285
GeForce GTX 470
GeForce GTX 570
GeForce GTX 580
Quadro FX 3700M
Quadro FX 3800
Quadro FX 3800M
Quadro FX 4800
Quadro FX 5800
Quadro 2000
Quadro 2000D
Quadro 2000M
Quadro 3000M
Quadro 4000
Quadro 4000M
Quadro 5000
Quadro 5000M
Quadro 5010M
Quadro 6000
Quadro CX
The other GeForce GPUs of the GeForce 8xxx or later series with 896MB or more RAM can be made to work in the GPU-accelerated mode in CS5.5 by modifying the cuda_supported_cards.txt file. Your 7600 GT will not work at all in that mode because not only the card has too little RAM, but is also too old.
Hope this helps.

Similar Messages

Windows Vista and iTunes just don't get along!

Everyone,
I'm having some serious issues with iTunes 7.6 and Windows Vista Ultimate. This is on a new capable computer, with a vista system rating of 5.1. Newest device drivers and windows updates are installed.
Problem #1- iTunes takes forever to start up. At least 30 seconds, sometimes a full minute. During this time, there is very little HDD activity, processor usage is under 4%, and the system responds quickly to other requests. Other applications and games have to issues with startup, only iTunes.
Problem #2- Occasionally, the iTunes window becomes black. If I then hit the start button on the keyboard, the iTunes window becomes normal again, but it is quite annoying.
Anyone else experiencing these issues? Any resolutions?

I'm going to group 1, 2, and 3 together, and assume it sounds as if the iBook hasn't been authorized for use with your iTunes Store account. In iTunes, click on your Store menu (at the top of the screen) and click Authorize Computer. Enter the information used to make your purchases and click Authorize. Once it says it's successful, see if you can play the songs in iTunes first. If so, go ahead and try to get them onto the iPod (whichever method you prefer). If they still don't play, please repost with the error message you receive so we can be of better assistance.
Number 4 sounds like it may be normal behavior... example: If you have 10 songs in your Music library and you Autofill the iPod with all of them, and go back to the iPod's Contents and manually delete 5 of them, then add 3 more songs to your library and Autofill the iPod again from your Music library, you'll end up with all 13 songs on your iPod again. Let me know if you're able to follow what I'm saying... I almost wasn't :P
CG

IPod Touch and Vista Ultimate won't get along

I recently purchased an iPod Touch 16gb and have had some major issues ever since. THis is long winded but that's because without all details I think peopel will tell me to do what i've already tried.
When I first connected the device up I was prompted to update my iTunes and this completed successfully. Then when loading my music onto the device i got a few errors saying "The iPd cannot be synced. The disk could not be read from or written to." and then "Attempting to copy to disk 'xxx' failed. The disk could not be read from or written to. It sounded like a hard disk error but I persevered and managed to get my music loaded.
Then everything was going to fine for a while until one day I'd left my iPod attached to my PC (Vista Ultimate 32bit) overnight to charge and when I took it to work that day I found that all my music and videos had disapeared. I did some searching and this seemed to have happened to others.
When I got home and attached the iPod to my computer I was prompted to do a restore. So I kicked this off but part way through I received an error saying "The iPod could not be restored. An unknown error occured (9)." And that was it. Dead iPod. It wouldn't turn on and wasn't recognised anymore apart from windows saying "USB Device Not Recognised". Apple replaced this for me thinking it was a hardware problem.
Unfortunately I had the same problems with the next one. This time however I uninstalled and reinstalled all my apple applications (iTunes, Mobile Device, Quicktime etc.) as mentioned on the support pages. Unfortunately it didn't solve the problem. Once again I recieved the same errors and my music disapeared. This time I did a restore using the iPod menu and that was successful but then I kept getting the sync and write errors so once again I tried a iTunes restore and same again... dead iPod and back to Apple for my 3rd iPod.
I've now got my third one and am having the same issues. I've uninstalled and reinstalled the apple products many times, updated my USB drives and windows is completely to date. I've also created another user in Vista and get the same problem. I have a feeling this has something to do with the Apple Mobile Device Support but am not too sure as i've unistalled and reinstalled it a number of times.
Any advice or tips appreciated before I brick my 3rd touch and ask for a refund!

Se if thsis previous discussin helps
https://discussions.apple.com/message/23727903#23727903#23727903

A 10/100 Router and a gigabit switch...will they get along?

I am setting up my business network between multiple computers. I need gigabit speeds for large file transfers (video, audio, images), but I also need internet connectivity. I was planning on using a simple 10/100 4 port broadband router and a Netgear Prosafe 24 port 10/100/1000 gigabit switch. If I connect the router to the switch, will my network's performance decrease since the router is responsible for assigning ip addresses, or will the switch's gigabit speeds still work within my network (since switches operate using MAC addresses)? Can anyone help me on this one? Thank you!
P.S. --It's also between Mac and Window systems
Powerbook G4 17" Mac OS X (10.4.7)

If the devices plugged into the gig-switch have gigabit ethernet ports, then you will see a speed advantage over 100mbps performance. I have a similar setup, with a 4-port linksys router that is 10/100 and an 8-port linksys gig-switch connected to it. I connect my printer and VOIP adapter directly to the router, since they aren't gig anyway, and connect my other devices to the gigabit switch.

Powerbook (digital audio) and 1/8" jack NOT getting along

ok see if you can help me troubleshoot this.
i bought two of these cables:
<http://www.cablesforless.com/index.asp?PageAction=VIEWPROD&ProdID=2779>
"Our Custom Made 3.5mm Male to 2-Male 1/4 inch phono plugs audio cables are perfect for connecting your speakers and microphones. These cables feature Belden's 1800B digital XLR cable and Steren® precision machined connectors. To ensure maximum signal integrity and protection from RF and electromagnetic interference the cable also features a Beldfoil® shield and fully shielded connectors. Professional termination using high grade solder ensures optimal signal transmission. Designed for optimal sound quality, Belden's performance speaks for itself. Compare Belden's specifications (below) with those of other digital XLR cables and see for yourself how Belden cable is unmatched. Belden Brilliance® teamed with Steren Connectors brings audio to life!"
sounds good, right? they both exhibit the following symptoms.
i'm using it in the headphone jack of my powerbook g4 15" and going out to a little mixer so i can hear system audio, itunes, etc. through my system. this longer cable is replacing a monster cable of the same kind (but shorter).
i'm getting absolutely HORRIBLE buzz when i plug it into the headphone port. if i jiggle it a bit i can get it to behave but only if it sits just right.
on a crt imac and an older titanium powerbook G4 the issue is much better. i still hear a line hum. i wouldn't want to record like this, but it's not a nightmare.
on an ipod plugged into the power adapter it works beautifully. however, i CAN get it to buzz horribly if i jiggle the plug as i insert/remove it.
eyeballing it with the monster cable tip, it looks exactly the same.
so on one hand, the monster cable works great in all uses.
the cablesforless cable works terribly on the powerbook but nowhere else.
now here's a clue: the powerbook G4 has combination analog/digital input and analog/digital output jacks. i haven't been able to repeat it reliably, but the cablesforless cable seems to be able to trigger the digital interface part, as evidenced by a red light shooting out of the port.
unplugging the powerbook totally removes the buzz.
i get the buzz when this cable is in EITHER the input or output jack.
tried a different power supply in a different jack in the same room... same results both ports (slightly different tone to the buzz)
if i remove the little mixer and plug the 1/4" cable ends into two inputs on a practice amp, i get the same issue.
finally, i got another digital audio powerbook g4 15" and the connection seems to be slightly more reliable, but still problematic.
PowerBook G4 Aluminum Mac OS X (10.4.5)

For starters, EPUB is a profile of XHTML, not HTML5. Further, audio and video support are part of the recently-approved EPUB3, which the release notes for ADE 1.8 explicitly say is not yet fully supported. Specifically, <epub:trigger> will allow you to use audio and video: http://idpf.org/epub/30/spec/epub30-contentdocs.html#sec-xhtml-epub-trigger
Do these EPUB files that you're not seeing in ADE pass validation? http://validator.idpf.org/
Basically, it sounds like you're trying to do things that ADE isn't supposed to support yet, and in a way it is unlikely to ever support (since ADE is known to be pretty conformant to the EPUB standards, it's very likely it will support the EPUB3 version of doing things rather than the hackery I've seen for Apple's reader).

PrPro 5.5 and nVidia GeForce 7600 GT - do they get along..?

This question should probably be directed to nVidia, but since I know that this forum is used by some very talented people, my hopes are that there's one out there that can help..:
After installing Premiere Pro 5.5, using 2 x nVidia GeForce 7600 GT GPUs, I've experienced multiple BSOD's while exporting HD footage from PP 5.5 through Adobe Media Encoder 5.5. Furthermore I've experienced several occations of my screens going black for a second, followed by a "Your GPU driver stopped working and was restarted" Windows message.
I suspected the problems to be related to the co-relation between PP 5.5 and my GPUs (the "driver stopped"-thing almost for certain) and by checking the Adobe GPU compliance list and not finding my GPU there, my suspicion was enhanced.
However, on its driver download site nVidia states that the latest driver 275.33 "Supports the new GPU-accelerated features in Adobe CS5". This statement is not limited to certain versions of GeForce GPU's, so I have to assume that it counts for the 7600 family as well.
So my questions are as follows:
• Am I right in assuming that my BSOD problems can be related to the GPU?
• If so: Keeping in mind that nVidia states that the 275.33 driver supports Adobe CS5's GUP accelerated features, is there any way around forging out a fortune on a new GPU to make things work as intended..?
My set-up:
CPU: AMD Athlon 64 x2 4200+ 2200 Mhz • Motherboard: M2N32-SLI Premium Vista Edition • RAM: 4 GB Kingston HyperX pc3200 • GPU: 2 x MSI NX7600GT Diamond Plus (Sli) • Harddisks: 4 x Hitachi SATA, total of 1360 GB • OS: Win 7, 64 bit

Arne,
Don't feel so bad about this. You're not alone in experiencing such indifferent support. AMD, the owner of ATi, is even rougher than Nvidia when it comes to support of older GPUs: AMD has ceased further driver releases for all of its GPUs older than the HD 2xxx series except for critical compatibility fixes (the so-called "legacy support" status), beginning with the Catalyst 9.4 drivers (which pre-date the release of Windows 7).
By the way, if you don't perform any tweaking or hacking (software-wise), the only Nvidia GPUs that are certified to run in GPU-accelerated mode in CS5.5 are:
GeForce GTX 285
GeForce GTX 470
GeForce GTX 570
GeForce GTX 580
Quadro FX 3700M
Quadro FX 3800
Quadro FX 3800M
Quadro FX 4800
Quadro FX 5800
Quadro 2000
Quadro 2000D
Quadro 2000M
Quadro 3000M
Quadro 4000
Quadro 4000M
Quadro 5000
Quadro 5000M
Quadro 5010M
Quadro 6000
Quadro CX
The other GeForce GPUs of the GeForce 8xxx or later series with 896MB or more RAM can be made to work in the GPU-accelerated mode in CS5.5 by modifying the cuda_supported_cards.txt file. Your 7600 GT will not work at all in that mode because not only the card has too little RAM, but is also too old.
Hope this helps.

MacBook Pro and Airport Express Aren't Getting Along

So this is a little crazy. My Macbook Pro cannot access the internet via my Airport Express [which I'm using to create a network]. All the other wireless devices in my house (iPhone, PS3, etc) are having no problem accessing the internet via the express. And my MacBook Pro can access the internet no problem when I'm connected to other networks...
My PS3 is getting downloads of about 11.5MBPS from the express, and my iPhone is getting about 6.8MBPS. Though my MacBook is connected to the network, it's getting little to no internet (best I've gotten is .07MBPS, so it's basically nothing).
Please help. I've tried EVERYTHING (PRAM reset, SMC reset, even bought a new Airport Express).
Thanks!

Just checked that as well, it's set as a wireless N network that is B/G compatible... So it's got to be something else. Thanks for the suggestion though!

K8N Neo2 939 and BFG 6800 Ultra not getting along

Everything runs ok until I install the drivers for the Geforce 6800 and then everthing goes to hell. So I was having IRQ problems because MSI is not smart enough to to put some kind of VGA AGP IRQ assignment in the BIOS. I disable onboard audio, also the Serial and Parellal ports (who uses these things anymore?) to free up Irqs. It works and no more Blue Screen, but I still have artifacts, or something like that, when I boot into windows that looks like static lines in the screen.
Here is the question I have I am getting all these conflicts, memory and the such, between the motherboard and the 6800, I think this is the problem, does anybody know how to clear this up? Or if the problem might be something else?
THXs you very much before hand.

It was over on the EVGA forums when I was trouble shooting my card
What drivers are you running?
edit:
http://www.evga.com/community/messageboard/topic.asp?TOPIC_ID=3976&FORUM_ID=23&CAT_ID=1&Topic_Title=Having+problems+with+your+card%3F++READ+HERE+FIRST%21&Forum_Title=GeForce+6+Family+Forum

Panasonic HDC-SD9 and Final Cut Pro, they finally WORKS!

I finally get the Panasonic HDC-SD9 and Final Cut Pro to get along.
http://37prime.com/news/?p=99
http://37prime.wordpress.com/2008/04/11/panasonic-hdc-sd9-perian-to-the-rescue/
Perian 1.1 to the rescue.

The solution has been around for about three weeks now.
http://discussions.apple.com/thread.jspa?messageID=7141858&#7141858
It always good to do a quick search for solution using the search dialog box.
glad it's working.

HT4061 hello im in the navy deployed. i cracked my screen and some how managed to get the charger tip stuck inside my phone. i do have apple care how much is this going to cost to fix it and will they fix my iphone or send me a new one?

hello I'm Manuel Cruz im in the military and i am deployed i was wonder how much it would cost to get my IPHONE 5 fixed. i crack the screen and managed to get the charge tip stuck in my phone. i was also wonder if you would fix my device or send me a new one. Also wondering if there was a time frame on how long this would take?

If your phone was damaged by you or in accidental damage, then you would be liable to pay for the repairs. Apple does not offer "loaner" phones, but if you have a credit card, they will "advance ship" a replacement to you so you can get it, then return your damaged one to them and as long as they get it back within a resonable time and it is warranty covered damage, they do not charge you for the replacement iPhone, but they do charge you a fee for the advanced replacement option (about $40-80 USD IIRC).
You can eliminate all the at by making an appointment at a local AASP (Apple Authorized Service Provider) and they should be able to check your iPhone on the spot. It it is covered under the warranty, they shoud replace it for free right there, and if not, they would let you know and you have the choice to make the repairs or not.

How to get all permissions on server level and project collection level via tfs java sdk?

i need to list project-collection level's permission and project level's permission on my project. now i have connected to tfs and i have got project collection list and user list via tfs java sdk. but i can't find the way to get the permission name list
and permission list. how can i do to get that?
i have checked the database, and find that the actions have some discrepancies with the tbl_securityaction'data.
Can anyone give me some advice on that?
davy

David, Thanks for your reply.
I have test the code above, but still get error. here is my code:
final TFSTeamProjectCollection tpc = SnippetSettings.connectToTFS();
final DefaultClientFactory factory = new DefaultClientFactory();
final IIdentityManagementService2 ims = (IIdentityManagementService2)factory.newClient(IIdentityManagementService2.class, tpc);
final String scopeId = null;
final String[] propertyNameFilters = null;
TeamFoundationIdentity[] appGroups = ims.listApplicationGroups(scopeId, ReadIdentityOptions.EXTENDED_PROPERTIES, propertyNameFilters, IdentityPropertyScope.BOTH);
error message:
java.lang.NullPointerException
at com.microsoft.tfs.core.clients.webservices.IdentityManagementService2.listApplicationGroups(IdentityManagementService2.java:92).
davy

Inventory Report for actuals and projected?

Hi,
currently i am doing APO-BI Project. I have a requirement to extract the Opening stock from ECC and Projected(Forecasted) Opening stock from APO.
both are 2 different key figures 1 is from ECC and another one is from APO. I need to display in Bex report in
say for example, if we have 53 weeks in a year. if i run the report in week 25, in the bex report it has to display the Opening stock values from ECC up to week 25 and remaining weeks till 53 weeks it has to display Projected Opening stock values in the same line.
plz provide me the logic to achieve this report.
regards
venuscm

Hi,
Create Two Cubes one is for APO and another is 0IC_C03 for Inventory. then build a MP on both and create reports.
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
0VALSTCKVAL      " For Value
0VALSTCKQTY      " For Qty
0CALMONTH        " For Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection, drag and drop following InfoObjects
0VALSTCKQTY     " For Qty
0CALMONTH       " For Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
                " value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection, drag and drop following InfoObjects
0VALSTCKQTY    " For Qty
0CALMONTH      " For Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
Thanks
Reddy

Split valuation with batch management and project stock

Dear Gurus,
I need to combine two following requirements:
1. split valuation with batch management (valuation type = batch number)
2. project stock
These two functionalities work fine separately but not together.
I receipt PO for material with spiit valuation on a batch level into a project stock. Posting is OK and material document (MSEG table) seems to be OK (batch number, valuation type and project stock are in this table). The problem appears when I want to display material in this valuation type (MM03) or batch (MSC3n). They don't exist!!! Short investigation showed that during goods receipt table MBEW (valuated stock) was not updated with this valuation type.
But If PO is receipt into normal stock first and then posted into project stock everything is OK.
Have you had or heart about such issue? I would appreciate any sugestion.
Thsnks in advance.
Marcin Bernat

Hi,
As you already know ,u are using project stock and doing goods receipt against project, stock table QBEW will be updated and not MBEW. MBEW only updates in case of plant stock valuation. If u receive any goods against project stock it does not contribute to plant stock. Irrespective whether your material is managed in split valuation or not, If it is received against project stock it only updates QBEW. There is no need to update MBEW, if u r using split valuation in project. QBEW also have valuation type as another level like MBEW. If u want to see material price for project stock, it can be seen in QBEW -valuation type and not in mm03.
As u r receiving goods against project stock this is d only reason QBEW is updated and not MBEW.
QBEW will store all information like MBEW for batch number, valuation type and project stock assignment.
Hope it answers your question.
Deepak.

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

I open FCPX, see Events and Projects, then they disappear

Here's what's going on:
1. Was using macbook to edit, via an external drive (with events and projects folders on root level)
2. Tried using Imac to edit, so I closed everything out, Unmounted drive and mounted it on iMac before opening Final Cut.
3. Opened FXP X and found that one of the elements was simply not in any of the projects that used it. It is possible, I suppose, that During the creation of these elements I was using a clip stored not in the elements folder, so it was lost track of, but there's no red frames saying I've got detached Video.
4. Tried opening the backup I'd made of events and project folders on my second external drive (events and projects folders also on root level.
5. At first when FCP X opens, I see the projects and events that I want to see, including the missing event appearing in the project list thumbnail sorta timelines in the project browser, but within seconds, projects and events diappear, leaving FCP looking like there are no projects or events. Clean Slate.
6. I notice that the events and projects browsers at first show events and projects as being contained in the external drive. When all disappears, it seems to be because the external drive is no longer recognized or superseded by the Macintosh HD, which becomes the only HD shown in either browswer.
Not sure if the 1st issue (disappearing element) and the 2nd (disappearing events and projects before my eyes) are related.
But at a loss.
Thoughts?

Projects and events can disappear if they are exact copies, clones of other projects and events on other drives.

E-MU Proteus X, Sonar 4 and Project 5 do they get along

Similar Messages

Maybe you are looking for