E not possible to post down payment clearing.

Dear all sap guru's
iam getting this meg:
could you explaine me?
document XXXX E not possible to post down payment clearing. there are no downpayment.
regs
laks

Hi Lakshmi,
Give some clarity for your issue.
Which t.code ur using
and check it downpayment is in the open item or not.
giv me the reply i will update you

Similar Messages

KO88:Not possible to post down payment clearing. There are no down payments

Hi,
We are doing Full Settlement of an order in TCode KO88. There are few Down payments against a PO. Initially, system gave an error as follows: -
You cannot post comp.retirement for asset 120002 0 with this trans.type
    Message no. AA341
Diagnosis
    A down payment was posted to asset 120002 0. In depreciation area 01, if
    not elsewhere, all down payments were not cleared.
Procedure
    Before posting a complete retirement on this asset, you have to first
    clear the down payment in all depreciation areas.
We cleared the down payments and ran KO88 again, but a new error popped as given below.
Not possible to post down payment clearing. There are no down payments.
    Message no. AA571
Any help will be acclaimed.
Regards,
CMC Team
Edited by: CMC Team on Jan 18, 2012 2:59 PM
Edited by: CMC Team on Jan 18, 2012 3:01 PM

Friend,
Probably you did not take the trouble to search the SAP Oss for notes on this error message.
Please search for 'AA571' in the notes section of SAP oss and you will find several notes addressing the exact issue you are having.
For your convenience.
www.service.sap.com/notes
Best regards,
Vishal Thakur.

Not possible to post down payment clearing. There are no down payments:CJ88

Hi Experts,
When I settle WBS Element cost to the Asset Under Construction using transaction CJ88, I receive following error.
AA571 Not possible to post down payment clearing. There are no down payments.
Please help.
Thank You.

Hi,
first please check if the message AA 571 is right:
- Please check table ANLC. If ANLC-KANZA + ANLC-ANSAZ < 0    AA 571
- Check asset values (AW01N, ANEP, ANLC) and find out where the negative down payments come from (tty 180, 181)
However, in some cases a negative down payment balance cannot be avoided (for example through translation differences in foreign currency areas). This is the problem of AA 571. Sometimes it is not justified. For this
cases we have the following note:
860038 Error AA571 not justified
Using SM30, for the T100S table, create an entry for the message
class AA, message number 571, allowed message type "AEW" and
standard message type "E". Select the entry as 'Switch off'.
If when you post to a fixed asset the down payments are negative, or
become negative through the posting, you continue to receive an error as
a default with these changes.
Recommended procedure:
o Change this message to a warning message for one or several
       special users. This user should then be used to post to any such
       fixed asset that has down payments that are already negative or
       become negative through posting.
o This should only be permitted in the cases where a negative down
       payment balance cannot be avoided due to foreign currency
       rounding.
regards Bernhard
Edited by: Bernhard Kirchner on Feb 11, 2011 9:27 AM

Error: Not possible to post down payment clearing.There are no down payment

Hi expert,
I am running a settlement for an internal order and encounter the following error message.
"Not possible to post down payment clearing. There are no down payments."
Message no. AA571
When checked on the vendor, the invoice has been cleared in the same month before the settlement. Under the Internal order line items, there is still an unsettled amount of the invoice.
This internal order settles to an AUC asset. Previous month settlement was ok. Only problem with december.
The downpayment acct is currently zero.
Is there something wrong with the message table, or the posting of the vendor invoice ? Anything to do with the special GL indicator ?
Kindly advise what is the cause and the method to resolved this asap.
Thanks.
Angel.

Hi Angel ,
My client also getting error message while doing settlement(T.C.KO88) even though Note.8600038 applied.
Error Message:Not Possible to post down payment clearing .There are no down payments.
Message: AA571
If your issue is solved.
please can you tell how did you solve this issue.
Thanks,

Deferred tax: Post down payment clearing individually $1 while f-4E3?

Hi all,
We are booking the invoice as well as clearing the special GL transaction through F-43/ F-41
001 39S      0009000457 PRADEEP SANGVIKAR          10,000.00-
002 40       6030000039 Testing Charges             9,066.00                 SA
003 40       4040000067 Service Tax Credit(           907.00                 SA
004 40       4040000069 EDN cess on ST cred            18.00                 SA
005 40       4040000071 H&SECess on ST cred             9.00                 SA
Hhere S (SPECIAL GL) is for staff advance
we are getting the error
Deferred tax: Post down payment clearing individually $1
Message no. DEFTAX023
kindly solve ?

Hi,
Kindly refer to below SAP notes. Might be helpful.
Note 913805 - Error FF891 or DEFTAX025 when posting FI-Documents Version: 5
Thanks
Aravind

Deferred tax: post down payment clearing individually $2 while f-44

Dear Experts:
We are trying to clearing the Special G/L transaction through T-code : F-44 but facing an error as Deferred tax: Post down payment clearing individually $2. Please find attached screen shot for your reference.
Would you please suggest me why I'm facing this error and how can I resolve this issue?
Thanks in advance and your prompt response is will be highly appreciated.
Best Regards.
Ripon Kumar Paul

Dear Dev:
Many thanks for your prompt reply. Already I've checked Sap Note 913805 and deleted all 4 BTEs mentioned there through T-code : FIBF but problem still exists. I'm facing the same problem.
Best Regards.
Ripon Kumar Paul

Asset Down payment clearing

Hi Gurus,
I have scenario where i need your expert advise.
1. Posted down payment on AUC asset- 01 depreciation area-1000 USD
30 Group depreciation area- 1500 CAD
later we realized that this project is scrapped and user posted down payment clearing by using 181 transaction type. Due to the exchange rate fluctuation the amount in group currency area has increased and left the balance on AUC. Now we want to scarp the AUC. Tried all the possible ways, but getting error saying that clear the down payment on auc first
Has anyone encounter similar kind of scenario. If yes please let me know how to clear the balance left over in group currency depreciation area

You would have simply reversed the original down payment entry
Now you reverse the entry, which is with TType 181 thru AB08
Then reverse the original down paymetn entry.
Eveything should match now.

Error -Account 'Down-payments clearing account' could not be found for area

When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
Deepak

HI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
   a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
   b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
   (Transaction AO90) in Asset Accounting Customizing. The same applies
   for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved   (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni

Down Payment Clearing push button not showing in MIRO

Dear SAP Guru,
I already activated "LOG_MMFI_P2P" using SFW5. Now we are getting Down Payment option in ME21N but we are not getting down payment push button in MIRO.
We are doing in that way:
First we created PO. We do not provide any down payment in the time of creating PO then we post the down payment using f-48. MIGO has done.
Now we are doing MIRO but Down Payment Clearing push button is not appearing. Please help me.
Best Regards,
Shoyeb

Hi,
Do check you had entered the down payment category and down payment percentage in PO.
Do follow the correct steps for down payment and check again if your are getting message in MIRO , then you should get the down payment push button also.

How to get the pop up of Down Payment Clearing while posting an Invoice using MIRO tcode

Hi,
I am having a requirement where I need to display the Down Payment Clearing pop up.
Scenario: While posting an Invoice, user have to check whether he had done any downpayment for the Purchase Order, if so, then there will be a Information displayed saying "Down Payment for Purchase Order xxxxxxxxx exist". Then user has to click the Down Payment Clearing button in the header level, then a pop up window is displayed.
But now my requirement is when the Information Message is displayed, if I click enter button to goto next screen, that time itself I need to display the Down Payment Clearing pop window, rather than clicking the down payment clearing button in the header level.
Kindly suggest any user exit or badi to do this customization
Thanks & Regards,
Karthikeyan G.

Hi,
At the time of entering the invoice from MIRO/FB60, system gives a pop-up for downpayment clearing. If you go in the help, the following thing is mentioned in the part Procedure.
Procedure
Check whether a transfer posting or a clearing of special G/L transactions (for example down payments) is necessary after you have posted the present document.
Here SAP has clearly mentioned that we can do the clearing after posting of this document.
Regards,
Amit
Edited by: amit kulkarni on Nov 13, 2009 2:53 PM

Down Payment Clearing pushbutton in MIRO (SAP ECC6 EP4) after F-48

Hi,
I have tried all sorts of steps, but I am unable to see this Down Payment Clearing pushbutton in MIRO transaction.
Required package - LOG_MMFI_P2P is already installed and found OK in SFW5.
Down payment maintained in PO, request created in F-48 and now I am trying to clear it in MIRO, but this button is not visible.
Any clue?
Please revert.
Regards,
Dipak

Dear Experts,
As i am trying to do the same process in my organisation to post the DP in PO at header or item level and after that following the ME2DP process for posting DP and then i do MIGO.
After GR as i do MIRO process and select the PO there is no DOWN PAYMENT Push button on header level on MIRO Screen.
I already re-started the Business Function "LOG_MMFI_P2P" after that also it is not showing the push button.
Please kindly help in this to get that DOWN PAYMENT clearing button?
Regards
Arun Rai

Withholding tax calculation at down payment clearing F-54

Hi,
Can any one reply the solution
When I am posting down payment to vendor, Basic TDS, Surcharge, Ecess on TDS and Ecess on Surcharge calculated.
Invoice is half of the down payment and TDS and Ecess on TDS calculated properly.
but when i am trying to clearing the down payment against invoice thru F-54, TDS and Ecess on TDS reversed and surcharge and Ecess on Surcharge is also reversed on proportionate basis.
It should not be reversed and client wants which is TDS is raised at Invoice it should be reversed. but we are getting more than that.
Plz help me
sai

Hi,
I think, what system doing is fine,
Let me explain with the accounting entries,
1. Down Payment
Debit Vendor SPL GL a/c      1000
Credit Bank a/c                                945
Credit TDS Payable (all taxes)             55
2. Invoice Verification
Debit GR/IR or Expenses a/c           2000
Credit Vendor a/c                                     1890
Credit TDS Payable (all taxes)                    110
3. Down Payment clearing
Debit Vendor a/c                     945
Debit TDS Payable a/c              55
Credit Vendor SPL GL a/c                       1000
4. Payment (Final)
Debit Vendor a/c                     945
Credit Bank                                               945
5. TDS Payment
Debit TDS Payable                      110
Credit Bank a /c                                         110.
Hope the above scheme of enteries would be helping you to understand this flow.
Saravanan.A

Down Payment clearing at the time of Goods Receipt

Dear All,
We have activated the setting "Configure Automatic clearing of Down Payments". We are entering down payment in PO and while processing Goods Receipt system is generating automatic down payment clearing document. The issue is the document posting with GR/IR line items are not updating in the FM report FMRP_RFFMEP1AX. The Goods receipt line item is picking the account assignments like Fund center etc are updated based on PO account assignments because we are referring PO while doing down payment. The invoice also created with GR/IR line item and these line items are also updated in FMRP_RFFMEP1AX report. So the line items against GR/IR are part of consumption of budget. The consumption amount does not contain GR/IR line item while doing goods receipt but invoice GR/IR line is part of consumption of budget. As a result, the GR/IR line item is not nullifying the consumption of budget and is adding to the consumption in addition to the expense line item in goods receipt. So its consuming budget twice.
The issue is GR/IR line item while doing goods receipt is not part of consumption of budget even though the GR/IR line item created in the Goods receipt document. At the same time the GR/IR line item in invoice line item is part of consumption of budget. Please let me know the reason why the GR/IR line item in Goods receipt is not updating in the report.
Regards,
Sree

Hi,
500000*9 is GR and 51*0020205 is IR
GR/IR Commitment item- Find in the atttachment
OF29-Find in the attachment.
Thanks.

Down Payment Clearing pushbutton in MIRO (SAP ECC6 EP4)

Dear Experts,
As i am trying to do the same process in my organisation to post the DP in PO at header or item level and after that following the ME2DP process for posting DP and then i do MIGO.
After GR as i do MIRO process and select the PO there is no DOWN PAYMENT Push button on header level on MIRO Screen.
I already re-started the Business Function "LOG_MMFI_P2P" after that also it is not showing the push button.
Please kindly help in this to get that DOWN PAYMENT clearing button?
Regards
Arun Rai

Hi,
I just re activated that module function and process this practise in the similar way SAP has guided in its library which i can tell you in the brief. I suppose that way will work for you.
Posting of Down Payment Clearings and Down Payments in Purchase order
1. Create a purchase order with one or more items. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Create ->Vendor/Supplying Plant Known (ME21N).
a) In the item details, choose the Invoice tab page. In the Down Payment Category field, choose the Mandatory Down Payment or Voluntary Down Payment setting.
Confirm your entry.
b) Enter an amount in the Down Payment Amount field, or a percentage in the Down Payment % field.
c) Enter a due date in the DP Date field.
d) Save your entries.
2. On the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Reporting ->Down-Payment Monitoring for PO.
3. In the Purch.Doc. field, enter the purchase order number of the purchase order you just created, and enter the appropriate due date interval.
Choose Execute.
4. Select the purchase order you created in the list and choose Create Down Payment Request.
The Down Payment Based on Purchase Orders screen appears.
5. In the group box Execution, choose either Down Payment or Down Payment Request and then choose Continue.
Depending, either the Down Payment Request screen or the Down Payment screen appears.
6. Change the proposed amount to be paid in the Down Payment Amount field and choose Continue.
7. on the subsequent screens (similar to F-47 / F-48), enter the required data and post the document.
Posting of Down Payment Clearings in Logistics Invoice Verification
Preparation for this process:
1. Create a purchase order with one or more items. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Create -> Vendor/Supplying Plant Known (ME21N).
2. Use the Financial Accounting transactions (such as F-48) to create down payments for this purchase order.
3. Post a goods receipt with reference to the purchase order you created. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Inventory Management -> Goods Movement -> Goods Movement (MIGO).
Step to follow for Execution
1. Post an invoice with reference to the purchase order you created. To do this, on the SAP Easy Access screen choose Logistics --> Materials Management --> Logistics Invoice Verification --> Document Entry --> Enter Invoice (MIRO).
2. Check the invoice items and correct them if necessary.
3. Choose the Down Payment Clearing pushbutton.
4. In the Amount Entered column, enter all the amounts you want to use to clear the displayed down payments.
Save your entries.
5. Post the invoice.
6. Display the invoice document. To do this, on the SAP Easy Access screen choose Logistics --> Materials Management --> Logistics Invoice Verification --> Further Processing --> Display Invoice Document (MIR4).
i Think the way all the process mention here will help to process your requirement becuase this worked for me and i follow the same way. One think which i like to share with you is i assigned the advance payment at document header level.
Regards
Arun

Automatic clearing vs down payment clearing

Dear Guru's,
I got a problem regariding clearing,My Client wants to clear customer down payments against invoices through Automatic clearing f.13.
Is it possible or not? If possible let me know other wise why it is not possible.
And also give me few points regarding F-39 ( Customer down payment clearing ) vs F.13 ( Automatic clearing.
Appreciated your kind of help.
Shekar.

Hi
In order to clear these documents both invoice & down payment - assignment field and amount fields should be same.
Down payment clearing is manual - this will be done manually.
F.13 - automatic clearing is done by the system based on the criteria maintained in the configuration
VVR

E not possible to post down payment clearing.

Similar Messages

Maybe you are looking for