E-print does not print attached documents. Only prints text in mail if no attachments

Hi,
When emailing a document to my Hp photosmart 110 it will only print the job if I type in the mail and send it. If a document is attached (word, pdf etc) then nothing is printed, though I get the a mail in return "job received" and not later on a mail "job failed".
In the e-print center I can see the job but in red it says "system error" ! I have tried several times and many different documents (only one document attached at the time). No changes has been made to any systems. The problem has existed for some week now. Please help
(hp photosmart b110, operating system windows XP, mail: Outlook, No changes made to any systems)

Similar Messages

My Windows Hotmail does not showan attachment when I write an e-mail.

When I go to Hotmail on Firefox, I cannot attach anything to my e-mails because the site does not show the attachment line.
However, when I go to Safari, the attchment line is on my Hotmail e-mails.
Help!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel

using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel.
double-click opens Excel Office 2011 for mac without the document.
It should open the document in Excel 2010 for Windows.

In Parralells, choose the file you want to open.
Right Click on it and choose Properties.
In the General Tab you will see "Opens with:"
Click the "Change ... " button.
Then choose Excel 2010. The checkbox below should be set to "Always use ... "

Expense Report Summary page does not show any totals - only zeros

Hi All,
On creation of Expense Report in the portal When entering a billable expense report, when you get to the summary page is does not show any totals - only zeros for other two schema's its working fine like displaying totals
we are surprised that any custom development is hitting or anything relates with configuration
Provide valuable inputs to proceed further
Regards
Jaipal

Hello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio

Workbook does not exist in document store

Hi All,
I have transported a workbook by selecting Role with "only necessry objects" then selected only my workbook, that transport was successful.
My Role has different folders, this workbook is part of one of the folder.when this transport went through it messed up other workbooks in that folder. when i try to run other workbooks in that folder it says " workbook does not exist in document store"
Can anybody explain me why is it sayin so, do i need to select all workbooks in that folder when i transport??
Thanks in advance.
Robyn.

Hi Robyn.
Sounds VERY like the issue we have to manage carefully, where an old transport has gone through, and undone the impact of a later transport - could that be the problem? If so, I will explain how we have set up a process to enable us to manage it, cos there are times when we have had up to 6 different workbooks going through in parallel, each with a role transport, and ensuring that the older ones dont undo the effect of the newer ones was nearly impossible!
Patrick

Help! Bridge does not display Indesign Documents as spread thumbnails anymore.

Adobe please fix this issue. Adobe Bridge CC and (also CS6) does not display Indesign documents as spreads like it always used to. It displays a preview of the left hand page only not both left and right. This is very frustrating as this was a very useful feature from day one. Why is it not there and what can you do to get it reinstated asap.

Moving this discussion to the Bridge General Discussion forum.

My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

From the box the iphone came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download fromwww.itunes.com/download)"
You will need Mac OS 10.5.8 or later in order to get itunes 10.5 or later, in order to connect your iphone.

"The stylesheet does not contain a document element" error

Hi,
I'm using Hyperion Financial Management 11.1.1.3
I successfully created intercompany transactions but when I select the "auto match" to perform the matching process, the running task page ensure that the process is completed successfully. However, when I press "log" I found the following error:
Error Number:-2147467259
Error Description:The stylesheet does not contain a document element. The stylesheet may be empty, or it may not be a well-formed XML document.
Error Source:msxml6.dll
Page On which Error Occurred:/hfm/Administration/ShowRunningTaskLog.asp
My environment is win server 2003 on a VM and EPM 11.1.1.3
Thank you and best regards,
Ahmed.

Hi taku,
Yes I've solved my issue.
Firstly, make sure that the entities and accounts used in the Intercompany Transaction are allowed for ICP in the metadata file by setting the attribute "IsICP=Y" to yes.
Then, after you press the "Match" button, wait until the process finished and don't open the log. Just close the running task page, after the status showed that it is completed, and open the "process IC transactions" page again you will find the square sign becomes green which means that the transactions are matched.
I followed the following example on Oracle by Example [http://www.oracle.com/technetwork/middleware/financial-management/tutorials/mictrans-094190.html?ssSourceSiteId=otncn]
It's about "Managing Intercompany Transactions in Financial Management".
I wish you can solve your issue soon.
Best wishes,
Ahmed.

How can i setup pages to automatically open when double clicked. Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.

Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.

Hi Karen,
Sounds like OS X has lost the association between Pages and its files.
Start by quitting Pages, then going to Finder.
In Finder, locate a .pages file. Click on it (once), then press command-I (eye, not one) to Get Info.
In the Info window that opens, expand the Open With section.
In this section, click on the pop-up menu and choose Pages (even if Pages is already shown).
Click the Change All button to associate all files with the .pages extension with Pages.
Close the info window.
Double click any .pages file to check that Pages will now launch and open the file.
Regards,
Barry

SQLite encrypted Database does not get attached Using Adobe Air,Why?

Hi,
Any one knows the solution, am trying to attach the encrypted SQLite database adobe air-adobe flex bulder , it does not get attached using sqlconnection.attach throws error, though the given key is correct, but it gets open using sqlconnection.open with the same key, any one knows the solution, how to attach the encrypted data base, since am using two data base one is opened and another must be attached to the existing ,thanks in advance. using adobe air- flex related. i use the following code
databaseFile1 = File.applicationStorageDirectory.resolvePath("Sample_1.sqlite");
databaseFile2 = File.applicationStorageDirectory.resolvePath("Sample_2.sqlite");
dbConnection.open(databaseFile1, SQLMode.CREATE, false, 1024, secKey);
dbConnection.attach("db2",databaseFile2,null,secKey);
got the following error.
ERROR #3125 Unable to open the database file.

And I would say more "this is the issue" !
It should be possible as it is clearly stated in the doc :
public function attach(name:String, reference:Object = null, responder:Responder = null, encryptionKey:ByteArray = null):void
with
encryptionKey:ByteArray (default = null) — The encryption key for the database file. If the attach() call creates a database, the database is encrypted and the specified key is used as the encryption key for the database. If the call attaches an existing encrypted database, the value must match the database's encryption key or an error occurs. If the database being attached is not encrypted, or to create an unencrypted database, the value must be null (the default).
so with a same encryptionkey, I (and this should be the same for FinalTarget) can open the encrypted db but not to attach it... quite strange.

My problem is that since I update my iphone 4s ios 8 and then restore it and when I connect to itunes does not sync my music only applications

my problem is that since I update my iphone 4s ios 8 and then restore it and when I connect to itunes does not sync my music only applications

I had a similar issue and I was told that my iTunes match was on.
I had to disable iTunes match on my iPhone.
Following which - after you plugged in your iPhone to iTunes, select your iPhone on iTunes menu. You should see a summary page of your iPhone where it provides options to update or restore. On the bottom there should be an option to select "sync only selected music/playlists". I can't remember the exact wording. Once that's been checked, select your iPhone's music tab and it should allow you to select the music playlists you want to sync.

G60-230US Laptop - HDMI cable does not provide sound output only video

HDMI cable does not provide sound output only video. I have the following device adapter - Mobile Intel(R) 4 Series Express Chip Set Family, and two sound, video, game controllers - Coexant High Definition Smartadudio 221 and Intel (R) HIgh Definition Audio HDMI. I do not see any option but "Speakers" on the Sound "playback" tab. Not sure what to do to fix

With the cable connected to source, click to select/highlight the Intel HDMI. next click the 'Set default' button.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English

Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
(You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

E-print does not print attached documents. Only prints text in mail if no attachments

Similar Messages

Maybe you are looking for