E-Rec 6.0: How to increase the tabs on Candidate Profile

Hello,
I'm trying to find out how to increase the tabs that we see on Candidate Profile. In any clients, only 5 tabs are visible on the profile and for more, the candidate clicks on next to view other tabs and then submit the profile. I searched for all configuration tables and code but could not find any.
I appreciate if anyone could share this info if they know how to do this.
Points would be awarded .
Thank you
K.

Hi,
You can configure the tabs at Technical Settings->User interfaces->Setting for BSP->Flexibilization->Container Sequences.
if you want to add one tab, you have to define one element for container sequence and then assign it to the container of candidate profile at Modify Container Sequence.
Best Regards,
Shaoming

Similar Messages

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

How to increase the number of rows in Status Oveview iView in MSS?

Hi
We have implemented MSS and have a question regarding Status overview iview.
The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
I checked the options in iView property and do not see any option to increase the number of rows.
please help
Thanks
-Michael

Hi Micheal,
Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
Regards
<b>Raja Sekhar</b><i></i>

How to increase the number of rows to be displayed in BEx Web Analyzer

hi,
I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows of data at a time. How to increase the number of rows? do i need to any kind of settings?
pls reply.

Hi,
I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
<bi:BLOCK_COLUMNS_SIZE value="4" />
<bi:BLOCK_ROWS_SIZE value="17" />
Then just save, and ignore the error messages.
Message was edited by:
vind Reinsberg

How to increase the battery life of your N series ...

What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
Hope this helps.
Useful links: Phone firmware update | Nokia support site

02-May-200701:14 PM
bixby wrote:
no keffa it is a cop out from nokia
its not unfai as its a premium device with a premium price
the n95 battery is atrocious
dont change the post content as the title is 'How to increase the battery life of your N series device'
your talking about nokia phones specifically
the networks are not to blame
they do not make the handsets : Nokia do !!!!!!!!!!
I'm going to choose my words carefully here...
I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
Useful links: Phone firmware update | Nokia support site

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to increase the performance of a report

can any body tell me how to increase the performance of a report?////
i have prepared a report to show the expense detail .I have used BSIS and BSAS table.
But whenever I am executing it is facing runtime error (TIME_OUT error ).
Moderator Message: Duplicate Post. Read my comments in your previous thread.
Edited by: kishan P on Nov 25, 2010 1:38 PM

Please SEARCH in SCN before posting.
Also post performance related issues here.

How to increase the size of text boxes in FCPX without stretching the text inside?

How to increase the size of text boxes in FCPX without stretching the text inside?

There are two basic Title formats — I should say Layouts — available: Text (plain) and Paragraph. (The plain text version usually does not appear with the blue dot controls — those generally appear for the paragraph type control.)
If the Title is using a Paragraph layout, it's like having a mini version of Text Edit available inside FCPX. You can tell when you click on the text (when the title is selected) -- a rectangle will appear around the text like so:
double clicking on the text will give you the bounds controls which you can use to redefine the text area without distorting the text. Once selected, notice the button that appears in the top right corner of the canvas:
Pressing that will activate the ruler. You can right click on the ruler and add Tab Stops (left, right, center and decimal.)
So if the title uses paragraph formatting, you can create a very WYSIWYG type of display text (use the Text inspector to alter text selections within the paragraph bounds.)

How to increase the speed of video (avi file) using labview

How to increase the speed of video (.avi file) using labview? I have tried this by skiping alternate frames. also I have used minimum time delay.Is there any other option for which i can go?
please suggest me...........

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

How to increase the size of bootcamp partition in macbook-late 2009

How to increase the size of the bootcamp partition in macbook late 2009, without using any third party softwares.

Pick yourself up by your own bootstrap too?
Reinstall after restoring to HFS only then.
You want something that works, then spend the $20 on Paragon CampTune or WinClone 3.

How to increase the width of Panel Tabbed layout

How to increase the width of detailed items of a Tabbed Panel ? I have many columns inside a detailed item of tabbed panel i can see only 3 colums ,to see the rest of the column i need to scroll. I tried to set the width but doesnt seems to be working
<af:panelTabbed id="pt2" inlineStyle="width:800.0px;">
<af:showDetailItem text="Interview" id="sdi1"
inflexibleHeight="50"
inlineStyle="width:800px; border-color:Aqua; border-width:thin;"
styleClass="AFStretchWidth">
Is there any way to increased the width of showDetailItem of panelTabbed ?
Thanks

Make sure the stretchChildren property of the shoDetailItem is set to first.

How to increase the performance in server 2008 R2 for RDP users

Hi,
My application take to much time to load. If anyone double click on mail client the exe file will appear in task manager but it will open after 5 mins. how to increase the performance.
My sever configuration is as below,
SC2600 Intel motherboard with total 24 core processors and 32 GB RAM and 8 TB Hard Disk. RAID 5 is configured which has two lungs one is 167 GB for C drive and other is 4.5 TB for D drive.
There are 28 Thin-clients connected to server through L300 N computing Thin-clients.
Thin-clients connect to V-space server installed in server for RDP users to get connected.
we have installed around 20 applications including printer and scanner driver. And apps are has below,
Firefox browser, windows mail, Adobe acrobat XI, canon printer and scanner drivers, Epson printer and scanner driver, E scan anti-virus, office 2007, v space, power ISO, win-rar,Tally and e token drivers and some backup software's.
Below are the services and features enabled,
AD, File services, RDP, web server, Hyper-v, .net frame work.
Is there a way to increase the performance .
Very slow performance.

Hi,
what would you suggest on hardware configuration must be for above mentioned applications and services with those many users.
how many cores and ram size is required.

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

How to increase the size of piechart in ssrs?

Hi how to increase the size of piechart in my design mode its showing very large one,when running/preview mode its displaying very small, i have total 10 values to dispaly in the legend series values,So here i have set the visibulity option to out side ,
so if the pie chart is dispalying small ,the values of the legend will come in one place and ,so can you suggest me how to increase the size of my chart and how would i show my legend values separatly without closing one by one.
Can some one please help me out for this..

Hi Ychinnari,
According to your description that you want increase the size of pie chart in the design mode to make all the ten values in the legend series to display, you have do some setting but the pie chart still display very small and not display some of the
values, right?
I have tested on my local environment and found that the display of the chart legend value can be effect by many factor: the size of the chart, chart area position and chart legend position.
Details steps below for your reference about how to set the properties to make all the legend values display correctly:
Select the Chart properties and expand the size and increase the values for the width and the height, then preview to see if all the legend values are display.
If this do little help, the problem due to the chart area position and chart legend position need to reset too.
Select the chart area properties and expand the CustomPosition under the Position, choose the Enabled to true and reset the Width, height of the pie chart.
Reset this properties to make the chart area more Narrow, thus we can set the Legend area more wider.
Select the chart Legend properties and expand the CustomPosition under the Position, choose the Enabled to true to reset the Width, height of the chart Legend
Reset this properties to make the Legend area more bigger (wider and higher) thus it will display more values in the Legend area.
If your problem still exists, please feel free to ask.
Regards
Vicky Liu

How to increase the files picked up by File Adaptor per poll interval

Hi,
We have a scenario where in we post 80 files in the source directory and and the file adapter is configured for every 300 sec but i have noticed that the File adaptor is picking up one or two files per poll interval.Can some please suggest how to increase the number of files picked up by File adaptor
Thank You,
Nandini

Nandini:
Did you mention all the files names in the Adapter channel. One thing you can do is use wild cards and file adapter picks most of them
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
In case if your files are huge, then I guess file size may cause to process few files during each poll

E-Rec 6.0: How to increase the tabs on Candidate Profile

Similar Messages

Maybe you are looking for