E rec 600 - APPLY_DIRECTLY

Hi All,
We have upgraded 4.6c to ECC 6.0 SP11 (technical).
We are in process of implementing E-recruitment for internal job postings. E-rec 600 is installed on the same server of ECC.
We are using structural authorization profiles for all our employees.
However, we are facing strange problems in candidate start pages (0001).
For some employees - Apply directly in candidate personal pages doesn't show the job postings after clicking on the Start search where as it shows to some other users.
Please let me your valuable inputs for this kind of strange behaviour. Thanks for your time in advance. points assured.
Kind Regards,
Anil Kumar.

Hi Anil,
I'd check the following 2 point as a first approach:
If SAP implemented everything correct (unfortunately not all applications apply on that :o(). Internal published positions are only found for internal candidates and external published are only found for external ones. There is a flag in IT5102 which is set for employees leaving the company. Internal Canddates (candidates with an employeeID) are treated as external candidates so they might not find the positions.
If you have this problem the next step would be to analyse if the flag is set wrong and why this happens. Sometimes there are troubles with candidates reentring the company.
The other point are the structural authorizations - they are quite tricky. As they apply to the e-recruiting and all e-recruitingobjects are HR-Objects you have to ensure that everyone has the correct structural authorizations, perhaps you have to assign a special e-recruiting profile to the SAP* user.
Best Rgds.
Roman

Similar Messages

Internal server error in Requistion create - E-rec 600

Hi All,
We are in process of upgrading the 4.6c to ECC 6.0. E-rec 600 installed in the same box (server).
We wish to use the Requistion management services for creating the RR via the BSP's through WAS.
I assigned assigned manager role (SAP_RCF_MANAGER) to user1 and assigned Recruiter role (SAP_RCF_RECRUITER) to user2
When I run the requisition maintaince application REQ_MNT_LST from user1 and assigned the requistion to the recruiter (user2) every thing goes well.
In the step 9 (creating job postings) the system fails to go ahead and throws exception - Internal server error.
We have already activated this bsp service in tcode sicf and roles are assigned properly.
Is there any additional settings we need to do in spro for Job postings or any more settings in sicf ?
Please help !!! Any help in this regards would be highly appreciated. points assured. Thanks for any inputs in adavance
Regards,
Anil Kumar

I would fear that the Internal Server Error is an indication of a more serious error. Have you checked if this is generating a Short Dump (Transaction ST22)? You need to determine the actual root cause of the error, as the Internal Server Error is rather generic. You should also consider opening a support ticket on this error as this sounds more like a support issue.

Job Postings in E-rec 600

Hi Experts,
Need your help...
We are using mySAP ERP 2005 (ECC 6.0) and E-rec 600.
E-rec 600 is installed on the same box. We are using the Create Requisition Request via the standard BSP for Recruiter role.
Generated the URL for the start page (recruiter) using RCF_GENERATE_URL and is as follows :
http://hostname.companyname.com:8000/sap/bc/bsp/sap/hrrcf_start_int?sap-client=235&BspClient=235&sap-language=EN&BspLanguage=EN&rcfSpId=0003
The application runs fine in the browser fine.
However, when I create the Job postings, the system throws exception :
"Internal error occured"
The roles are assigned properly. Is there any settings I need to do before creating the Job postings (viz, User and Central Person) ?
Also, is mandatory to run the report (HR_SYNC_PERSON) for tranferring the HR data to E-rec engine ?
We are using the Job postings for internal candidates only. Please share your experiences.
Please, provide steps if I missed anything. Thanks for your time and valuable inputs. points assured.
Kind Regards,
Anil Kumar.
Really stock in Job postings. I am

Hi Gabriel,
Thanks for your fast reply and response. When I check the application log.
It show there is an serious error with red color icons
Serious error; see log
Message no. HRRCF0001000
Diagnosis
The system detects a technical inconsistency
The error occurred in program CL_HRRCF_POSTING_BL===========CM00H line 145
Message no. HRRCF0001010
Diagnosis
The system detects a technical inconsistency.
System Response
The operation will be terminated.
Termination takes place in:
Main program: CL_HRRCF_POSTING_BL===========CP
Subroutine: CL_HRRCF_POSTING_BL===========CM00H
Line in source code: 145
Please let me know what I need to do to resolve this problem. Will I need transfer the HR data to E-rec engine via the report (HR_SYNC_PERSON) since I am on the same server - ECC 6.0.
Please share your experience where I am missing the steps. Thanks for yoru valuable inputs.
Kind Regards,
Anil Kumar.

E-rec 600 EHP4 implementation without EP

Dear All,
I would like to know the feasibility of implementing e-rec 600 ehp4 without EP. I understand from one of the sap notes that, EP is a prerequisite.
If it possible, please share the approach on high level.
Regards,
Rao

Hello Rao,
With out EP also you can implement E-rec SP04. However you will loose from MSS related fucntionality. You can embed the e-rec links in to share point and provide signle sign on access to recruiters and manager. Please see below link for more details. Let me know if you have any questions.
www.microsoft.com/isv/sap/technology/interop/sharepoint.aspx
Thanks,
Raghu.

Roles in E-rec...?

Hi All,
We are using mySAP ECC 6.0, Portal 7.0 Sp12, mySAP ERP 2005 BP 1.0,
ESS Webdynpro 600, E-rec 600.
There are many roles in e-rec. They are :
SAP_RCF_RQUISITION_REQUESTER - Requester
SAP_RCF_RECRUITER - Recruiter
SAP_RCF_MANAGER - Manager
SAP_RCF_MANAGER_ASSITANT - Manager's Assistant
SAP_RCF_BUSSINESS_ADMINISTRATOR - Administrator
Can anybody tell me what is differences in all these roles. What is actual process involved when creating RR - I mean who will create RR and to whom the notification will go ?
Please shade some light regarding the same.
Regards,
Anil Kumar.

Dear ,
Please have a look over the note 890357
Also For the following services, make sure to maintain the service user
(rcf_unreg)
1. hrrcf_apply_ext
2. hrrcf_cand_reg
3. hrrcf_password
4. hrrcf_pinstappl
5. hrrcf_pinst_pbl
6. hrrcf_search
7. hrrcf_unrg_appl
8. hrrcf_unrg_srch
For the background job user wf-batch a candidate must be created.
For the role of recruiter, I would suggest to run the report RCF_CREATE_USER it will automatically gives all the roles.
Best Regards,
Deepak...

E-rec screen customizations

Hi All,
We are using mySAP ERP 2005 (ECC 6.0), E-rec 600 is installed.
We are trying to customize the Requistion maintainance screen (Create RR). Can anybody shade some light regarding the same ?
The BSP application is REQ_MNT_LST.
Actually there are so many tabs like General Information, Job Requirements, Organisational Data, Education Requirements etc.,
We want to remove/hide some of the few tabs like Job Requirments, Education Requirements, Attachments.
Can we accomplish task using spro customization or any code changes in the BSP application ?
Please share your experiences. Thanks for your time and inputs in advance.
Regards,
Anil Kumar

Hi,
Thank you for your fastest repsonse and inputs.
I followed the same proocedure for fields customization (text boxes, labels etc,) and used context id via generating URL with the report RCF_GENERATE_URL.
Wondering how can we disable Tabs by adding New elements (spro's -> - define elements for container sequence).
Please shade some more light regarding the same. once again thanks for your time and inputs. points assigned.
Regards,
Anil Kumar

Problem in Career and Job

Hi All,
We are facing crictical issues in career and Job after we moved all our objects to quality machine.
We are using mySAP ERP 2005 Buss pack 1.0 with ECC 6.0, Portal 7.0 SP12 and E-rec 600.
The career and Job especially - Apply Directly and candidate applications throws most of the time "Internal error occured". This error occurs with all the user ids in quality machine. This used to work properly in development.
When we check tcode - slg1 - it says the employee is not an candidate.
We identified that - before using this services an employee needs to be registered as an candidate via the report - RCF_CREATE_USER or SYN_HR_PERSON. Is that true ?
If this is the case, then we need to run this report for all our thousands of employees.
Also, after running this report for one user id and when we logged into Portal.
The user is able to apply diretly and see the candidate applications. Unless untill it keep on giving messages "Internal errror occured"
Please share your experiences. Need your valuable inputs. points assured.
Regards,
Nazeer

HI prathmesh,
After installing SAP e-Recruiting 3.00 with Support Package 1, or higher,for career and job workset related applications to work,have you made the following settings in the Implementation Guide (IMG):
1.Choose the following IMG path: Cross-Application Components ? Homepage Framework ? Resources ? Define Server for Resources. Enter the server name and the port of your e-Recruiting system.
2.Assign the server to all e-recruiting resources and add the URL parameters stored. To do so, choose the following IMG path: Cross-Application Components ? Homepage Framework ? Resources ? Define Resources.
Enter the e-recruiting server for the following resources. Add the relevant URL parameters by replacing in the BSP client the 000 client with the client of your e-recruiting system.
EMPLOYEE_CANDIDATE_APPLICATIONS_SERVICE
EMPLOYEE_CANDIDATE_DATA_OVERVIEW
EMPLOYEE_CANDIDATE_DIRECT_APPL_SERVICE
EMPLOYEE_CANDIDATE_FAVORITES_SERVICE
EMPLOYEE_CANDIDATE_PERSONAL_SETTINGS
EMPLOYEE_CANDIDATE_PROFILE_RELEASE
EMPLOYEE_CANDIDATE_PROFILE_SERVICE
EMPLOYEE_CANDIDATE_SEARCH_JOBS_SERVICE
Ho[pe this helps,
Regards,
Siddhartha

ESS/MSS - Career and job

Hi Experts,
i am using standard ESS/MSS when i click on Career and job i am able to see skills,candidate Profile,Jobs,Personal Setting
under that when i click on it shows an error that
*Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
<htmlb:content>: Use the element once only
Error type:
Your SAP Business Server Pages Team*
what need to be done to solve this problem.
i have gone thru many sdn forum but they say that we need to Configure E-Recruitment for r3
Do we need any settings in R3 side.
i have gone thru help.sap also.
anyhelp on this.
Thanks,
Vijai

these services in ESS correspond to E-recruitment in backend ECC.
Make sure, you are using E-rec 600 component in ECC backend and it is configured properly. Check System -> Status -> Installed Components.
Try to start configuring the things in backend with your HR Consultant and as per as your business requirements.
Is your E-recruitment is on the same server of your ERP system ? If yes, then check this [documentation
|http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm]
Also, check this [documentation|http://help.sap.com/saphelp_erp60_sp/helpdata/en/72/c9b54015c4752ae10000000a155106/frameset.htm] for Configuration of E-rec in the backend.
Do check the tcode - slg1 application log in ECC backend for your errors in ESS.
Regards,
Anil Kumar

E-recruiting - creation of new employees

Hi all,
we created employees in PA using hire action. Then we used HRALXSYNC report to get BP and NA.
This provides data of NA in HRP1001
But the problem is that this candidate is not available in HRP5102.
Thanks,
Bharat
Edited by: Bharat on Sep 24, 2009 3:02 PM

Hmm,
I know why i hate integrated systems ;o).
I assume there is no authorization issue as you probably tested with SAP_ALL or something similar powerful. Unfortunately we are getting to a point where remote analyzes reaches its end. When I first set up the integration for e-rec in hr (ramp up e-rec 600) we needed nearly 4 weeks to get it run properly due to bugs and missing documentation.
Things which might bring you further:
- check note 997181, there is an attachment which describes the BAdI settings for integration, be sure all are set up as described
- check for HRALXSYNC notes in the service marketplace (there are usually plenty of them), just implment every note anyhow connected to it
- if not done already create a candidate using RCF_CREATE_USER, one via registration page and one via unregistered application, this might narrow the problem if there is a configuration issue within e-recruiting
These might help if there is a general problem. but I have to admit that if there is something very customer specific like changed subtype for sap user in IT0105 you will only find out debugging the whole stuff.
Kind Regards
Roman

E-recruitment Confugration

Hi All,
We are using mySAP ECC 6.0, Portal 7.0 Sp12, mySAP ERP 2005 BP 1.0,
ESS Webdynpro 600, E-rec 600.
We are trying to configure HRRCF_START_INT BSP pages to bring into Portal.
These are e-rec applications in BSP for Requisition create, Requisition Display etc.,
Any body has an documentation on this - how to confugures ?
From employee perspective, we are using Job search under ESS Home >>> Career and Job >>> Search Jobs.
It throws an exception :
The URL http://hostname.company.com:8000/sap/bc/bsp/sap/hrrcf_start_int/application.do was not called due to an error
The following error text was processed in the system DS1 : Access via 'NULL' object reference not possible.
The error occurred on the application server juds1d_DS1_00 and in the work process 3 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_VARIANT_LIST of program CL_HRRCF_SEARCH_M=============CP
Method: GET_VARIANT_LIST of program CL_HRRCF_SEARCH_M=============CP
Method: PROCESS_VARIANTS of program CL_HRRCF_SEARCH_M=============CP
Method: DO_INITATTRIBUTES of program CL_HRRCF_SEARCH_M=============CP
Method: IF_BSP_ELEMENT~DO_AT_BEGINNING of program CL_BSP_CALL_ELEMENT===========CP
Method: ONLAYOUT of program CLO24OGYCVBKBOQT5QITTPG239QUBCP
Method: %_ONLAYOUT of program CL_O24OGYCVBKBOQT5QITTPG239QUBCP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Method: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DS1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server juds1d_DS1_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server juds1d_DS1_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 235 -u: TCS_RAVI -l: E -s: DS1 -i: juds1d_DS1_00 -w: 3 -d: 20071029 -t: 134046 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
We are using FQDN, it is configured properly. This application throws same error when run this one from R/3 sides.
I have done the necessary settings unders spro's >>> Changing the URL to PCD resources.
Need yours expertise in this regards. Thanks for your time.
Regards,
Anil Kumar

Hi Graham,
Thanks for your reply and responses. 'll check with all the settings with our ESS Consultant and get back to you if any issues.
By the way, E-rec is installed on the same server. I will check ST01 tcode for authorization trace and revert back.
we have assigned all the roles for the user from where we are running the search application.
Is there any necessity of installing the TREX at ECC level to make the search jobs work ?
B'coz when I go through the IMG documentation in spro's :
SAP E-Recruiting >>> Technical Settings >>> Search Engine >>> Set up Search engine for E-Recruiting
It says that :
E-Recruiting uses the current version of Search and Classification (TREX) as a search engine.
You must install this search engine and the Python enhancement "XML Attribute Extractor" if you want to use the search functions for candidate data, job postings, and so on.
Perform this IMG activity in the production system as well.
Please share your experiences. Thanks for your time.
Answers to your previous posts are worthfull. points assigned.
Regards,
Anil Kumar

BSP Iview error message : Access denied

Hi All,
We are using E-rec 600 via the standard BSPs (REQ_MNT_LST) in ECC 6.0.
The application runs fine in the browser without any problem.
I started creating BSP iview in Portal for this application. The Url is mentioned below :
http://hostname.companyname.com:8000/sap(bD1lbiZjPTIzNSZkPW1pbg==)/bc/bsp/sap/hrrcf_start_int/application.do?BspClient=235&BspLanguage=EN&rcfLogAppl=REQ_MNT_LST
I have given the BSP iview properties for this application as follows :
Application Namespace : rcfLogAppl=REQ_MNT_LST
BSP Application : hrrcf_start_int
Start page : application.do
The application starts fine in Portal via BSP iview. But, however when I click on any of the drops in the application. In the status bar, it show the message : Access denied.
I tried in other browsers also. Same problem persists. I am sure that the roles at backend and permissions in Portal are set properly.
Please shade some light where I missed the steps. awaiting for your valuable inputs. thanks for your time, point assured.
Kind Regards,
Anil Kumar.

portal being on https and abap server on http is not the issue here.
the access denied error is a javascript error which will happen if the javascripts in the application tries to access js functions/dom elements from other frames or from other pages which are from different domains.
this requires the domain to be relaxed and when supports portal integration flag is checked the system automatically generates code which handles domain relaxation. with this check box checked you should not be having problem.
However i had the same problem even after setting portal integration flag. and my bsp application strucutre was on index.htm page and within that i had 4 frames. then i had to manually set the document.domain in index page which helped me to solve the access denied error.
Regards
Raja

ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

Hi,
We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
SQL> @?/rdbms/admin/catrelod.sql
TIMESTAMP
COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not 10.0.0.
DOC> Shutdown ABORT and use a different script or a different server.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database has not been opened for MIGRATE.
DOC>
DOC> Perform a "SHUTDOWN ABORT" and
DOC> restart using MIGRATE.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
Session altered.
Session altered.
no rows selected
DECLARE
ERROR at line 1:
ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
[], [], []I have checked the trace file in udump but it dint give any readable information.
Please find below environment details.
OS : RHEL 5 64 bit
11g Database : 11.2.0.2
10g Database : 10.2.0.4
Kindly assist.

KR10822864 wrote:
Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
please post 40 lines of alert log info .
MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
"Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
if not found any massages like above please raise [email protected].
Hi KR,
Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
    SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
    (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
      SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
        SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
        user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
        SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
        call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
        htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
        user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
        LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
        name=SYS.STANDARD
        hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
        namespace=TABL flags=KGHP/TIM/SML/[02000000]
        kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
        lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
        pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
        ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
          LIBRARY OBJECT: object=170e82de8
          type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
          DATA BLOCKS:
          data#     heap pointer    status pins change whr
              0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
      SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
      res: 0x17677adc8, mode: X, lock_flag: 0x0
      own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
      SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      cursor enqueue
      child: 170e89348, flag: 53, number: 0
      parent: 170e89738

Linux suse 10 32位 Oracle 9.2数据库ora-600-[2831], [0]

linux suse 10 32位 Oracle 9.2数据库ora-600-[2831], [0]
alert日志如下：
Errors in file /opt/oracle/admin/test/bdump/test_smon_12102.trc:
ORA-00600: internal error code, arguments: [2831], [0], [0x0], [0x0], [1], [0], [], []
Fri Aug 24 11:12:45 2012
Database Characterset is ZHS16GBK
Fri Aug 24 11:12:45 2012
ORACLE Instance test (pid = 8) - Error 600 encountered while recovering transaction (9, 32).
Fri Aug 24 11:12:45 2012
trace文件邮件发出
麻烦大师帮分析下及问题如何处理，ths...

LOG FINDING:
/opt/oracle/admin/test/bdump/test_smon_12102.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /opt/oracle/product/10.2.0/db_1
System name:     Linux
Node name:     linux-u72z
Release:     2.6.16.46-0.12-bigsmp
Version:     #1 SMP Thu May 17 14:00:09 UTC 2007
Machine:     i686
Instance name: test
Redo thread mounted by this instance: 1
Oracle process number: 8
Unix process pid: 12102, image: oracle@linux-u72z (SMON)
*** SERVICE NAME:() 2012-08-24 11:12:44.788
*** SESSION ID:(549.1) 2012-08-24 11:12:44.788
*** 2012-08-24 11:12:44.788
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [2831], [0], [0x0], [0x0], [1], [0], [], []
----- Call Stack Trace -----
calling              call     entry                argument values in hex
location             type     point                (? means dubious value)
ksedst()+27          call     ksedst1()            0 ? 1 ?
ksedmp()+557         call     ksedst()             0 ? 73000 ? B70893AC ?
                                                   C72D280 ? 3 ? 40C ?
ksfdmp()+19          call     ksedmp()             3 ? BFDCD5B4 ? AC05B20 ?
                                                   CBC2A40 ? 3 ? CB740C8 ?
kgeriv()+188         call     00000000             CBC2A40 ? 3 ?
kgesiv()+118         call     kgeriv()             CBC2A40 ? CC3C8EC ? B0F ? 5 ?
                                                   BFDCD620 ?
ksesic5()+44         call     kgesiv()             CBC2A40 ? CC3C8EC ? B0F ? 5 ?
                                                   BFDCD620 ? B0F ? 5 ?
                                                   BFDCD620 ?
kcfonl()+220         call     ksesic5()            B0F ? 0 ? 0 ? 0 ? 2 ? 0 ?
tbsonl()+24          call     kcfonl()             CC3E0BC ? 0 ? 0 ? 1 ?
                                                   BFDCE7BC ? BFDCDB94 ?
kcoubk()+131         call     00000000             BFDCDCB4 ? CC3E0A0 ? 1 ? 4 ?
                                                   0 ? BFDCE270 ? BFDCE254 ?
ktundo()+2426        call     kcoubk()             BFDCE32C ? BFDCDCB4 ?
                                                   CC3E0A0 ? 1 ? 4 ? 0 ?
                                                   BFDCE270 ? BFDCE254 ?
ktubko()+1299        call     ktundo()             1 ? 80008C ? CC3E09C ? 24 ?
                                                   38 ? BFDCE718 ?
kturrt()+1820        call     ktubko()             BFDCE718 ? BFDCE708 ? 4 ?
                                                   BFDCE7BC ? BFDCE5C0 ?
                                                   BFDCE700 ?
kturec()+1832        call     kturrt()             BFDCE7BC ? 20 ? 1 ? 0 ? 11 ?
                                                   4 ? 1 ?
kturax()+574         call     kturec()             9 ? 0 ? 1 ? 0 ? FFFF ? 11 ?
                                                   4 ?
    SO: 0xb392c810, type: 3, owner: 0xb35c491c, flag: INIT/-/-/0x00
    (call) sess: cur b38fc338, rec b38f2d98, usr b38fc338; depth: 0
      SO: 0xb392d3e0, type: 3, owner: 0xb392c810, flag: INIT/-/-/0x00
      (call) sess: cur b38f2d98, rec b38f2d98, usr b38fc338; depth: 1
      SO: 0xb38f2d98, type: 4, owner: 0xb392c810, flag: INIT/-/-/0x00
      (session) sid: 541 trans: (nil), creator: (nil), flag: (2) -/REC -/-/-/-/-/-
                DID: 0000-0000-00000000, short-term DID: 0000-0000-00000000
                txn branch: (nil)
                oct: 0, prv: 0, sql: (nil), psql: (nil), user: 0/SYS
      temporary object counter: 0
      SO: 0xb39da5e0, type: 5, owner: 0xb392c810, flag: INIT/-/-/0x00
      (enqueue) TX-00090020-0000006B     DID: 0001-0008-00000003
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 flag: 0x6
      res: b3b571f0, mode: X, prv: b3b571f8, own: b38fc338, sess: b38fc338, proc: b35c491c10.2.0.1.0+ Linux

AIF in Ehp4 - E-Rec

Dear Members,
Is it possible to use AIF (Adobe Interactive Form) instead of smartforms (Correspondence or Data Overview) in eREC Ehp4?
I don't find anything about using AIF in Ehp4 E-Rec here http://help.sap.com/erp2005_ehp_04/helpdata/en/b0/8af9114b224e4a9fab63ee633ffe1d/frameset.htm . However, I could see 31 forms in u2018SFPu2019 transaction if I search 'HRRCF'.
u2026Naddy

Hello Naddy,
first of all i think there is a difference between Adobe Forms and Adobe Interactive Forms. Adobe Forms are available for data overviews since release 600 anything. The interactive forms are used in the MSS scenario for requesting a requisition delivered with EhP3.
So far I have seen no difference the T77S0 switch RECFA DATAO. It has still the same description as in EhP3 that it is only used for data overviews and the classes for sending correspondences still contain the following comment lines:
* For now, Adobe Forms will not be used in correspondence at all - sf_adobe is always blank! (JDH)
* read adobe switch from t77s0
* CALL METHOD me->get_dataoverview_format
* IMPORTING
* p_gsval = lv_gsval.
*changes to due to new functionality of individual correspondence
What changes is that the old version of changing the complete corresponcence in an editor is no longer available. There is only the letter section solution from EhP4 on. The TextEdit to change the letter section is now replaced by a kind of editor which at least allows some formatting but not much. A BAdI gives a bit of influence ho the formatting is mapped into the Smartfarm Style but so far I had no time to check the real potential of this.
Kind Regards
Roman

HP LaserJet Enterprise 600 M602 driver issue

Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
Anatoly

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

E rec 600 - APPLY_DIRECTLY

Similar Messages

Maybe you are looking for