E-rec 600 EHP4 implementation without EP

Dear All,
I would like to know the feasibility of implementing e-rec 600 ehp4 without EP. I understand from one of the sap notes that, EP is a prerequisite.
If it possible, please share the approach on high level.
Regards,
Rao

Hello Rao,
With out EP also you can implement E-rec SP04. However you will loose from MSS related fucntionality. You can embed the e-rec links in to share point and provide signle sign on access to recruiters and manager. Please see below link for more details. Let me know if you have any questions.
www.microsoft.com/isv/sap/technology/interop/sharepoint.aspx
Thanks,
Raghu.

Similar Messages

  • E rec 600 - APPLY_DIRECTLY

    Hi All,
    We have upgraded 4.6c to ECC 6.0 SP11 (technical).
    We are in process of implementing E-recruitment for internal job postings. E-rec 600 is installed on the same server of ECC.
    We are using structural authorization profiles for all our employees.
    However, we are facing strange problems in candidate start pages (0001).
    For some employees - Apply directly in candidate personal pages doesn't show the job postings after clicking on the Start search where as it shows to some other users.
    Please let me your valuable inputs for this kind of strange behaviour. Thanks for your time in advance. points assured.
    Kind Regards,
    Anil Kumar.

    Hi Anil,
    I'd check the following 2 point as a first approach:
    If SAP implemented everything correct (unfortunately not all applications apply on that :o(). Internal published positions are only found for internal candidates and external published are only found for external ones. There is a flag in IT5102 which is set for employees leaving the company. Internal Canddates (candidates with an employeeID) are treated as external candidates so they might not find the positions.
    If you have this problem the next step would be to analyse if the flag is set wrong and why this happens. Sometimes there are troubles with candidates reentring the company.
    The other point are the structural authorizations - they are quite tricky. As they apply to the e-recruiting and all e-recruitingobjects are HR-Objects you have to ensure that everyone has the correct structural authorizations, perhaps you have to assign a special e-recruiting profile to the SAP* user. 
    Best Rgds.
    Roman

  • Internal server error in Requistion create - E-rec 600

    Hi All,
    We are in process of upgrading the 4.6c to ECC 6.0. E-rec 600 installed in the same box (server).
    We wish to use the Requistion management services for creating the RR via the BSP's through WAS.
    I assigned assigned manager role (SAP_RCF_MANAGER) to user1 and assigned Recruiter role (SAP_RCF_RECRUITER) to user2
    When I run the requisition maintaince application REQ_MNT_LST from user1 and assigned the requistion to the recruiter (user2) every thing goes well.
    In the step 9 (creating job postings) the system fails to go ahead and throws exception - Internal server error.
    We have already activated this bsp service in tcode sicf and roles are assigned properly.
    Is there any additional settings we need to do in spro for Job postings or any more settings in sicf ?
    Please help !!! Any help in this regards would be highly appreciated. points assured. Thanks for any inputs in adavance
    Regards,
    Anil Kumar

    I would fear that the Internal Server Error is an indication of a more serious error.  Have you checked if this is generating a Short Dump (Transaction ST22)?  You need to determine the actual root cause of the error, as the Internal Server Error is rather generic.  You should also consider opening a support ticket on this error as this sounds more like a support issue.

  • Job Postings in E-rec 600

    Hi Experts,
    Need your help...
    We are using mySAP ERP 2005 (ECC 6.0) and E-rec 600.
    E-rec 600 is installed on the same box. We are using the Create Requisition Request via the standard BSP for Recruiter role.
    Generated the URL for the start page (recruiter) using RCF_GENERATE_URL and is as follows :
    http://hostname.companyname.com:8000/sap/bc/bsp/sap/hrrcf_start_int?sap-client=235&BspClient=235&sap-language=EN&BspLanguage=EN&rcfSpId=0003
    The application runs fine in the browser fine.
    However, when I create the Job postings, the system throws exception :
    "Internal error occured"
    The roles are assigned properly. Is there any settings I need to do before creating the Job postings (viz, User and Central Person) ?
    Also, is mandatory to run the report (HR_SYNC_PERSON) for tranferring the HR data to E-rec engine ?
    We are using the Job postings for internal candidates only. Please share your experiences.
    Please, provide steps if I missed anything. Thanks for your time and valuable inputs. points assured.
    Kind Regards,
    Anil Kumar.
    Really stock in Job postings. I am

    Hi Gabriel,
    Thanks for your fast reply and response. When I check the application log.
    It show there is an serious error with red color icons
    Serious error; see log
    Message no. HRRCF0001000
    Diagnosis
    The system detects a technical inconsistency
    The error occurred in program CL_HRRCF_POSTING_BL===========CM00H line 145
    Message no. HRRCF0001010
    Diagnosis
    The system detects a technical inconsistency.
    System Response
    The operation will be terminated.
    Termination takes place in:
    Main program: CL_HRRCF_POSTING_BL===========CP
    Subroutine: CL_HRRCF_POSTING_BL===========CM00H
    Line in source code: 145
    Please let me know what I need to do to resolve this problem.  Will I need transfer the HR data to E-rec engine via the report (HR_SYNC_PERSON) since I am on the same server - ECC 6.0.
    Please share your experience where I am missing the steps. Thanks for yoru valuable inputs.
    Kind Regards,
    Anil Kumar.

  • Install one EHP4 Component without SAP Ehpi

    Hello Experts!
    We have an existing EHP4 System with SR1/SP03.
    Our Problem:
    For Example the Component ECC-SE is 600-0015 instead of 604-0003.
    All other Components are on 6004-0003.
    Is it possible to "Patch/Upgrade" the ECC-SE Component without the SAP Ehpi Installer from 600 to 604?
    The procedure with the Ehpi Installer are very involved, to "patch" only one Component!?
    Best regards!
    Benjamin

    Hello,
    What you want will not be possible without EHPinst.
    First of all you should make sure that your Maintenance Optimizer is up to date as well as your defined solutions.
    Afterwards you can select the new components (based on business functions that you would like to have) in the MOPZ again.
    MOPZ will then determine the missing software components and according support packages and will generate a new XML file.
    Afterwards you have to use EHPinst again to install the missing software components.
    A new tablespace PSAPSR3701X will be created (again with shadow instance, repository switch, ...).
    Advantage the software components that you would like to add are rather small, so elapse time will be very fast.
    We have already used this way of working to bring missing software components to EHP4 level.
    Online part was 1 day, off line part was 2 hours (for EA-HR and SAP_HR components, SAP_APPL was already on EHP4).
    Wim

  • PS Implementation without COPA

    Hi Gurus,
    Can anybody clarify following queries.....
    1. Can we implement PS Module without COPA Module.
    2. If so, what will be the settlement object in settlement rule. (WBS Settlement)
    Note: We are implementing PS module for Customer Projects and COPA is not in our implementation scope.
    Regards,
    Ganesh Ck

    It is ideal to have PS module along with COPA. However we can implement just the PS module. The only small issue that we would have is settlement of revenues. We need to settle revenue only to revenue GL accounts You have is create appropraite allocation structure:
    1. Create allocation structure
    2. Create 2 assignments "Rev" and "COST"
    3. For source assign all cost related accounts to "COST" and revenue related accounts to "REV"
    4. For settlement, the receiver category can be cost center/wbs element for "COST". The receiver category has to be GL accounts for "REV"

  • Mexico Digital Invoice Implementation without XI.

    Hi All,
    We are in the process of generating Digital invoice for Mexico.
    Is it possible to generate the Digital invoice without the XI system? If possible then what are the hurdles and challenges in achieving this. I did go through the list of Notes mentioned by SAP to implement Digital Signatures for Mexico. But they dont seem to mention about implementing with out XI system.
    Also is there any standard process to generate the XML required for Mexico. Appreciate any clarification for the above queries..
    Thanks in advance.
    Regards,
    Navin.

    Hi Naveen,
    Is important to consider three points at the moment of implementin Digital Invoice Mexico:
    Enablement of ODN (official document numbering).
    Enable digital signature in SAP.
    Creation of XML.
    You can perform the first two options withount PI/XI but the only problem will be the generation of XML, that for fiscal purposes is the digital invoice. If you are not using PI/XI you can do that by ABAP, Webmethods or any tool that generates XML.
    If you decide to generate the XML with ABAP, you dont need to use IDOC but is still needed to create an output message that generates the XML instead a smartform or other. This can be sent automatically to customers or to any kind of repository to keep the files for fiscal term.
    The structure of the XML must follows all Mexican requirements acording to Anexo 20 that you can find only in spanish.
    I suggest you to read the attachments on the following note, where you can find the structure and requirements and order of each XML field:
    1318342 - Digital Invoice Mexico IDoc basic type INVOIC02 Extension
    Regarding the standard process to generate XML in SAP, the only information provided by SAP is for PI/XI, so your ABAP team needs to take a look for anexo 20 structure:
    ftp://ftp2.sat.gob.mx/asistencia_servicio_ftp/publicaciones/cfd/Anexo20RMF2010.pdf
    I hope this may help you.
    Regards,
    RP

  • Crystal implementation without BOBJ

    Hi,
    What are the possibilities of implementing Crystal Reports without going for a full blown BOBJ project?
    What are pre-requisites for clients who have
    1. ) just ECC -
    2) ECC and BI
    Do thet need the BOE installation for utilizing basic Crystal capabilities?
    Thanks,
    Raj

    If you do not have a BOE server installaiton then you cannot let your users access the reports over the network using only their internet browser. Every user has to have a CR Designer installation in order to be able to refresh the reports. Additionally without a BOE server the parameter picklists are not really dynamic when you access SAP BW over a BEx query.
    A BOE server provides also additional functionalities like object-related security, scheduling, report bursting etc.
    Regards,
    Stratos

  • ESS implementation without using EP

    Hi,
    I want to implement ESS without using EP. Please give me the various ways to implement this. & suggest the most feasible solution. or any links related to this.
    Regards,
    Seema

    Hi Seema,
    <b> Welcome to SDN family </b>
    Evn if u use EP , ESS runs on the ITS Only .
    There are Service files ( Internet Application Compenents ) called as IAC's .
    Go to sm30 - > t77www_srv iview to see the transactions.
    Hope it helps .
    Rgds,
    J
    If ur problem solved ,Award pts and close the thread.

  • FFT implementation without using inbuilt FFT function provided with labview

    Hi,
    I am very new to labview ,I have to implement FFT on NI Node WSN-3202.No fft inbuilt function on WSN target is there to do so.Please anyone give me some idea to implement FFT without using fft function in labview.
    Thanks

    Hi rita,
    when all you need is "some idea" I would suggest to read the Wikipedia article on FFT...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • DMS Implementation without SAP GUI

    Hello All,
    I want to implement DMS (data manaagement system) in my project but without using SAP GUI.
    Could you please suggest which method to be used for the same.
    Thanks in advance.

    Hello All,
    I want to implement DMS (data manaagement system) in my project but without using SAP GUI.
    Could you please suggest which method to be used for the same.
    Thanks in advance.

  • RF-Implement without Warehouse  Configuration.

    Hi Friends,
    We are planning to implement RF at client location . They donu2019t have warehouse right now. They haev very simple procurement ; from PO u2013 GR at storage level only.
    Please let me know "Can we Implement RF without having the Warehouse if yes what challenges will come up?
    Or have to go with lean warehouse for passing values in LM01 screens.. as Warehouse looks Mandatory ."
    Does we require XI/ PI interface for RF implementation ?
    Regards,
    Lalit
    Edited by: lalit sharma on Sep 3, 2010 8:17 AM

    Hi,
    Your requirement was for RF transactions wihtout warehouse implemenation
    So dummy warehouse is just a warehouse number without anything in it - storage type, sections or bins
    1. For dummy warehouse, Bins are requried ? if yes thn material master has to be extended. - when there is no WM implemenation, BINs are not required and hence material need not be extended.
    2. If you have dummy warehouse , GR cant be posted untill warehouse mgt ( material)  - GR done till IM Location only
    because you may or may not assign dummy warehouse to a dummy storage location which is not used for any inventory purpose
    3. Dummy warehouse is something like Lean WM?  - Dummy Whse is just a code used for RF purpose
    4. If need to take Lt31 printout , will have problem if warehouse activated? - Without WM implemenation LT31 is not possible.
    dummy warehouse to a dummy stor location does not impact anything as far as dummy location is not used
    howere assignment is not mandatory
    Regds

  • Solved: ADF BC and primary keys - how to implement without using triggers

    Using the following OBE as an example:
    http://www.oracle.com/technology/obe/obe9051jdev/ADFWorkshop/BuildingADFApplicationsWorkshop.htm
    There is just one view that has CustomerId defined as a primary key, where the value for the primary key comes from the customer_seq sequence.
    How do you create the model using ADF BC entity to create an entity object that has a primary key that needs to be populated by a sequence table when inserted WITHOUT using a trigger?
    Basically I want to just use ADF BC instead of toplink in the OBE. We do not use triggers to insert primary keys, so this example is a good match for what I need.
    Can someone help me out. How do I adjust the model to use just ADF BC - how do I define the entity object to use a sequence. Do I just override the create method in the impl? Is it that simple? Or is there a way to do this point and click in the entity tool.
    Thanks!

    I'm not the dba (or one of several) - so don't shoot the messenger... the dba's do not like to use triggers in the code. I have been told that this has caused too many problems in application development.
    I don't ask why, just deal with the fallout.
    I did try using the following code in a create method:
    protected void create(AttributeList attributeList)
    super.create(attributeList);
    SequenceImpl s = new SequenceImpl("customers_seq", getDBTransaction());
    // this.setCustId(s.getSequenceNumber());
    this.createPrimaryKey(s.getSequenceNumber());
    When I run the test program for the module, I get a new entry with the id empty and greyed out. I was hoping that this would be filled in on the actual insert, but no joy. As soon as I try to commit, I get an error:
    (oracle.jbo.AttrValException) JBO-27014: Attribute CustId in CustomersWSView is required)
    So what needs to be done?
    Message was edited by:
    klee

  • ECC-600 EHP4 upgrade with VIRSAHR 520 700 - PREP_EXTENSION/ADDON_QCALC

    Hi
    We are getting following error at phase PREP_EXTENSION/ADDON_QCALC in the ECC 6.0 upgrade:
    3 ETN256 You want to install the following add-on components:
    3 ETN248 Component: "VIRSAHR" rel. "520_700", Support Package
    level: "0" (component type "A")
    3 ETN248 Component: "VIRSANH" rel. "520_700", Support Package
    level: "0" (component type "A")
    2 ETN085X"2. Adding Add-on Installation Queue" " " " " " "
    3 ETN262 Calculating queue part for add-on "VIRSAHR" rel. "520_700"
    3 ETN490 Use the Add-On installation package "SAPK-523EXINVIRSAHR"
    (type &4"AOX") for Add-On &2"VIRSAHR" rel.&3"520_700"
    3 ETN245 The following import prerequisites of OCS Package "SAPK-
    523EXINVIRSAHR" have not been met:
    3 ETN264 In the (alternatively) Requirement set "01":
    3WETN491 Required software component "SAP_HR" rel."600" is not installed2WETN543 OCS package "SAPK-523EXINVIRSAHR" does not match the current
    software component vector
    1 ETN214X."**************************************************"
    We have alreacy checked note 1002147, which clearly states that we have to include SAPK-523EXINVIRSAHR in the upgrade. SAP_HR is part of the upgrade.
    We have included SAP_HR and other Support Package as per the queue generated by Solution Manager, but we did not include VIRSAHR & VIRSANH Packages until we got to this phase. We then included these support packages in eps\in directory, but we are now getting this error now.
    Any ideas?
    Regards
    Chandu

    Hi
    This is what the solution provided by SAP Support:
    Quote:
    we have finally found the problem, it's a bug in the package upload
    functionality used by the upgrade. The consequence of this bug is that
    Support Packages whose EPS files (.PAT files) have a certain string in
    the name, namely the string 0000000 after the _ and before .PAT
    extension, are not properly uploaded to the ABAP system and hence are
    not visible or known to the upgrade.
    This bug will be fixed in the next upgrade tool fix, but in the meantimeyou can use the following workaround:
    Check your EPS/in directory after the CAR/SAR Archives of the SPs are
    extracted and rename all .PAT and .ATT files, which have a name like
    *_0000000.PAT (or *_0000000.ATT), by changing the string 0000000 to
    9000000. For example, for the VIRSANH SP SAPK-52302INVIRSANH rename the
    file VS30020106486_0000000.PAT to VS30020106486_9000000.PAT
    Afterwards, the upgrade will upload the informations about the SP
    properly and the SP can be included into the upgrade.
    Files:
    31/01/2007 07:32 329 VS30020106486_0000000.ATT
    31/01/2007 07:32 554,073 VS30020106486_0000000.PAT
    If these two files are renamed to e.g.
    VS30020106486_9000000.ATT
    VS30020106486_9000000.PAT
    the affected VIRSANH SP2 is uploaded correctly by the upgrade
    functionality and the SP inclusion of the VIRSANH SPs works.
    Sorry, as of now I cannot promise you a date when the tool fix will be
    available. I have found this bug only today in the evening (german time)and will discuss this with the responsible colleagues tomorrow.
    Afterwards, I will know more...
    Unquote:
    Hope this helps. We have decided against upgrading to 530_700 as it will involve upgrading GRC system and also new version has lot of new functionalities, which we like explore it after the ECC upgrade.
    Also, I would not suggest deleting VIRSAHR as all the config and customising done for VIRSAHR will be lost.
    Regards
    Chandu
    Edited by: Chandu Cheeti on Jan 17, 2010 11:19 AM

  • With EHP-6,ESS/MSS,E-REC can we implement Talent Mgmt & succession Mgt or still NAKISA required

    Hi All,
    In scope E- Recruitment & System is going to be on EHP-6 with ESS/MSS, i went through Mr.Luke Marsons some ofthreads which talks about if system is at EHP-4 then STVN(Nakisa),Netviewre is required. 
    Now i am confused my question after all  this reading & exploration is , As E-Rec,ESS/MSS,EHP-6 is gonna be in placestill does the client has to go for NAKISA & buy those additional 3rd part lisences Or is this task of Talent Mgmt & Succesion Plan acievable in Standard SAP EHP-6.
    Please guide as i in mid of somthing & need ur urgent assistance.
    Thanks.

    Hi Experts,
    Can i get any updates on this issue.

Maybe you are looking for