E-REC alias

hi
I am new in E-recruitment. during creation requisition under general information tab there is one field alias.
What is alias in E-recruitment ? it is mandatory to fill this field ? is this data influence other datas ? for example job posting or publication or something else ?
Regards
Garayev

Hello Garayev,
No this field is not mandatory in standard. In case of the requisition maintenance it is only a second possibility to identify your requisition. For example if you have several requisitions with the same name you can vary it with the alias field.
Regards
Nicole

Similar Messages

E-rec start page

Can any 1 tell me how to go to succession planners start page

Hello,
I have a requirement to hide some links from the start page of Internal candidate (Employee) in portal.
I Have done the necessary configuration at the back end SAP-E-Rec --> Technical settings --> User Interfaces > Set user interface with BSP's> Start pages. I also have generated URL using rcf_generate_Url and assigned it in portal.
But in the Internal candidate (Employee) start page, I get a display called as "Physical Writes".
When assigning the required links to the page group, there are fields in SAP which ask for Online text repository alias title. But thers is no F4 selection option to select from the available list.
Any clues how this can be fixed pls??
Best regards
G Raj

E-Rec - hiding links in Internal candidate start page in ECC6.0 por

Hello,
I have a requirement to hide some links from the start page of Internal candidate (Employee) in portal.
I Have done the necessary configuration at the back end SAP-E-Rec --> Technical settings --> User Interfaces > Set user interface with BSP's> Start pages. I also have generated URL using rcf_generate_Url and assigned it in portal.
But in the Internal candidate (Employee) start page, I get a display called as "Physical Writes". Any clues how this can be fixed pls??
Best regards
G Raj

Hello,
I have a requirement to hide some links from the start page of Internal candidate (Employee) in portal.
I Have done the necessary configuration at the back end SAP-E-Rec --> Technical settings --> User Interfaces > Set user interface with BSP's> Start pages. I also have generated URL using rcf_generate_Url and assigned it in portal.
But in the Internal candidate (Employee) start page, I get a display called as "Physical Writes".
When assigning the required links to the page group, there are fields in SAP which ask for Online text repository alias title. But thers is no F4 selection option to select from the available list.
Any clues how this can be fixed pls??
Best regards
G Raj

Partial candidate profiles in E-rec

For one Internal candidate, there are two cp records available in E-rec. 1. CP record with alias not mapped with pernr. 2. CP record with Pernr mapped with external user profile. Because of this system not considering the user as internal candidate and so not able to apply for any jobs through internal career site.
We have tried ALE the master data in both insert and update mode but E-rec profile not getting created/updated.
We have tried to delete those cp records individually using program 'RCF_USER_DELETE' but they are not getting deleted. Please advise.

Hi Karthi,
Please check wiki page: More persons assigned to one CP (Duplicate and Multiple) - ERP Human Capital Management - SCN Wiki for further help.
Regards,
Nicole

Installation of E-Rec System

Dear All
I need to install E-rec and TREX on our Portal System which has NW 7.0 SP 25. We also have ECC 6.0 Ehp 4 installed on a seperate server and it has E-REC 604.
If i apply E-Rec Business Packages on the portal (EREC ADMIN, RECRUITER & COMMON PARTS), and perform system connections between my EhP4 system and Portal, would that be enough?
Is it a pre-requisite to have NW 7.0 EhP1 installed before i apply the E-REC business packages on the portal system. my portal system runs on NW 7.0 SP25?
Please advise.
Thanks
Ahmed Nawaz

Hello Sunny
Thanks for your reply.
I have deployed the Business packages( E-RECURITER ADMIN. RECURITER, COMMON PARTS)
i have assigned erecrutiment administrator role for an user but when he is trying to acces it he is getting portal runtime error as
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 03:22_22/07/10_0329_5285250
Refer to the log file for details about this exception.
can you please help me out with list of things to be done from portal side to make erec role to work.
I have followed thies thread portal runtime error when accesing erecrutiment administratoe role and the solution says to create a System Alias. How do i create it.
Also i have another query, I am getting this error com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller.
This error occurs sometimes when the Developers access the ESS and MSS i Views. Upon researching i found out that the JCO pool configuration for Meta Data and Model Data under System Admin->WEbdynpro>MAintain JCO Destinations need to be changed.
Currently i have the following values
JCo Pool Configuration
Maximal Pool Size : 5
Maximum Connections: 10
Connection Timeout (msec.): 10
Maximum Waiting Time (msec.): 30
Could you please tell me the appropriate values for the above configuration.
Thanks a ton.

Passing parameters into a shell script through alias Names ????

I have two alias names ord and dev. And the content of them are as follows.
alias ord
ord='cd ${ORDER}/bin; export APPL_NAME=order; . SetupAppl order'
alias dev
dev='cd ${APPL_ROOT}/bin; export APPL_ENV=dev; . SetupEnv dev'
Alias ord calls a shell script called SetupAppl. Alias dev calls a shell script called SetupEnv.
I am trying to pass a parameter when calling the alias name dev, something like dev WEST. And I
want to read that parameter inside the shell script SetupEnv.
The way I want to execute them, first run the alias ord and then the alias dev. But, when I try
to read the parameter in SetupEnv by $1 it is showing the value of the parameter passed to SetupAppl
ie order and not WEST.
Is there any way to read the value (WEST) passed as a parameter when executing the alias name.
example : dev WEST and reading the value WEST inside SetupEnv
The reason I am executing those scripts (SetupAppl and SetupEnv) with dot(.) in the front is because
those scripts have some export statements which needs to exported to the environment.
Any help on this is highly apprecaited

Hi everybody,
I posted same question earlier for UNIX/shell script and rec'd one response. Thanks to Bob.
But the requirement has been changed and now my mgr wants the same task using PL/SQL. Could somebody help me ?
Question again....
I am working on a task which gets report on every remote database.
I created a small database: ‘REPORTS_DB’ and I created 6 'sql' scripts on that database. While executing the first script, it calls the other 5 different 'sql' scripts. All these 5 sql scripts use a '@db_link' (hard coded) and gets that database's report to the database: REPORT_DB.
It is working well. But,
We have 42 databases and I have to get reports of all the 42 databases. Since it is not efficient to create 42 sets of sql scripts, I want to make it automated.
I know (but I don't know HOW) I can pass a parameter (database link name) while running the first script (which calls the other 5 scripts), so that the parameter replaces the @db_link in all the 5 scripts and gets the report of the related (@db_link) database.
Could somebody tell me how to do this task using SQL and PL/SQL ?
OR
send me a sample PL/SQL script to do this task?
Sorry for the inconvenience and thanks in advance.
- JT

If statement in select statement alias

I have the following select statement. It has the alias Survivors, Deaths and "All Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS

You may not be able to add this condition inside the SQL Statement. But you can add this condition outside the statement, if you're using PL/SQL...
IF :p_language = french THEN
SELECT ALL t_ntr_multibar.cat,
t_ntr_multibar.num_cases_leftbar AS survivors,
t_ntr_multibar.num_cases_middlebar AS deaths,
t_ntr_multibar.num_cases_rightbar AS "All Cases"
ELSE
END IF;

Unable open Project details or a project from PWA Project server 2010 with Alias name

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx)
its is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
can any one Help me.
vijay kommireddi

Hi Eric,
Thanks for your Reply.
As you said i have added in Manged Path as (Testpwa/projects.aspx as <Wildcard inclusion>) But still problem is there it is asking user
name password again if click on any project in project center and and showing page cannot be displayed error.
This is url its is showing in the below of the IE ( http://def.ad.com/testpwa/projectdrilldown.aspx?ProjUid=e28c6d43-85b6-478d-9542-2961cc81a69e)
I have observed one more thing if click on Project
details then only this issue is coming project schedule and project information
is also opening with Alias name.
My farm version is 14.0.7015.1000
Vijay Kommireddi

HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

How to change the Existing alias with new alias name...MAXL SCRIPT

HI Experts
I need to change alias name of the existing member with new alias name.
please send me maxl code to change the alias name .
My thought is
1) Old alias should be replaced with new alias name .
2)There is one account that should be rolled out to another parent..these parents are already exsist
3) I need a MAXL Script to change the new alias name .
please suggest ASAP.
Thanks
USER

John
I heard that we can replace existing alias name with new alias thru MAXL
i.e replace alias name XXXX member with YYYY ;
please correct me if iam wrong ,might be Maxl command is wrong but this is the idea.
Thanks
USER

HT4436 How can I transfer my odl family pack email to new iCloud id? Or add a new email account (not an alias) to my main icloud id?

I had a family pack but now I am not able to reach my son's email account. How can I find and transfer it? Or how can I open a new email account for my son through my icloud id. Actually it seems as if there is an oprating email account under his name but e-we cannot receive any emails or cannot reach the account settings...

Each sub-account of a MobileMe Family Pack should have been individually migrated to iCloud before August 1st last. Assuming that you didn't do this, you should be able to reactivate the address (though not retrieve its previous contents) by signing in with it in System Preferences>iCloud and enabling Mail - your son should do this on his own Mac or his own user account if he is using your Mac. It's not clear whether he will be able to reactivate the @me.com version or only get an @icloud.com version. (It would be useful to know, when he tries it.)
If he did migrate the account to iCloud then signing in in the same way should retrieve the contents and the @me.com address should work.
Alternatively he can just create a new Apple ID (for which he will need a new non-Apple email address) if he doesn't already have one, and sign in with that, enabling Mail and choosing a new @icloud.com address.
You should note that in none of these cases does his account have anything to do with yours (there is no need for a Family Pack equivalent in iCloud as it's free at basic level).
You could add an email alias to your account, but it's not a good idea as it will mix his emails up with yours and he won't be able to detach it later.

Problem in creation of system alias for bw system

Hi,
I want to create system alias for the bw system
system admin->sys Config->system landscape->portal content->my own folder
for this folder i created the system object
after creation of system object, from property category i select the connector and give the details.
after that i select the user management and give
authentication ticket - select
Logon method- UIDPW
User Management type- admin,user
i saved till now
in the display object i select the system alias
then that screen displays
In the system alias screen, i clicked on add button for adding alias then we r getting this message.
User Mapping Status: (Not ready for user mapping configuration)
Please give the solution for solving this problem
Regards,
Sid.
Edited by: sid m on Mar 11, 2008 12:15 PM

Hi Krishna,
I checked the connection settings.
WAS settings in system object is giving this mistake
before user mapping it works fine.
after giving usermapping i ma getting this exception.
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
5. HTTP/S connection failed
for testing the connector i am getting this exception
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Regards,
Sid.

Query help - Using Alias in column equation

Hi All,
I have selected some data as an alias and would like to refer to the alias in another equation column. I cannot figure out how to do this correctly.
Here is my full query below, with a NULL called '3 Mnth Average' column because I am unsure how to reference the Alias and data type correctly for the required equation.
For example, I want to return the '3 Mnth Average' result being the '3 Mnth Total' Alias divided by 3. ('3 Mnth Total' / 3).... Every time I try... i fail.
Any help would be most appreciated.
Best regards,
John
SELECT T0.ITEMCODE, T0.ITEMNAME,
Cast((T0.ONHAND - T0.IsCommited) As INT) As 'Available',
Cast(T0.ONHAND As INT) As 'In Stock', Cast(T0.IsCommited As INT) As 'Committed',
Cast((SELECT SUM(T1.[Quantity]) FROM INV1 T1 WHERE T1.ITEMCODE = T0.ITEMCODE
AND DATEPART(mm,T1.[DocDate]) >= DATEPART(mm,getdate())-3
AND DATEPART(mm,T1.[DocDate]) <= DATEPART(mm,getdate())) As INT) As '3 Mnth Total',
(NULL) As '3 Mnth Average',
CAST ((SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 1 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) As INT) AS 'JAN QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 2 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'FEB QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 3 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'MAR QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 4 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'APR QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 5 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'MAY QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 6 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'JUN QTY',
CAST ((SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 7 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) As INT) AS 'JUL QTY',
CAST ((SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 8 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS INT) AS 'AUG QTY',
CAST ((SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 9 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) As INT) AS 'SEP QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 10 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'OCT QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 11 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'NOV QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 12 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'DEC QTY'
FROM dbo.OITM T0
LEFT JOIN dbo.INV1 T1 ON T1.ItemCode = T0.ItemCode
WHERE T0.SellItem = 'Y'
GROUP BY T0.ItemCode, T0.ItemName, T0.OnHand, T0.IsCommited, YEAR(T1.DOCDATE)
HAVING YEAR(T1.DOCDATE) = YEAR(GETDATE())
ORDER BY T0. ITEMCODE

Hi John,
If you are not using temporary table, you have to rewrite complete formula to get 3 month average. There is no way to reference within the same query.
Thanks,
Gordon

HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

Hai Frnds,
i Attend an interview they asked this questions can u know the answeres . tell me .
In File to file scenario how can we reprocess records which failed records.
HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
Thanks in advance
thahir

Hi,
Refer these links:
this might help you
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
validating against schema file for the output XML file
Informing the sender about bad records
Regards,
Nithiyanandam

Full path from Alias in Automation plugin

I have an automation plugin that watches for Save events and performs some processing in CS4.
When I do a "Save As", I've noticed that under some conditions, I can't resolve the alias in the PIActionDescriptor to a file path. Instead it resolves to the folder where the new file was saved.
You can duplicate this using the Listener plugin by following these steps:
1 - Open a file.
2 - Select Save As
3 - Select a different file format (Photoshop will change the extension. Don't edit the filename at all, let Photoshop do it.)
4 - Select As a Copy
5 - Save it
Now look at the listener log file. You should see that the path is to the folder not the file.
If you edit the file name in anyway, other than letting Photoshop change the extension, the file's path will be resolved.
I can work around this except for the case of a Save As "As a Copy".
Can anyone help?
Doug

The SourceDirectory element appears to be completely broken and has me flustered! If I specify a relative path without a '..' alias MsBuild responds with:
<SourceDirectory path="WebContent\bower_components"/>
Cannot find the source directory 'C:\GitCode\Resi\ResiTrader\ResiCloudService\bin\Debug\WebContent\bower_components' in role Web.
if I attempt to use '..' it changes the root path its resolves from!
<SourceDirectory path="..\..\WebContent\bower_components"/>
Cannot find the source directory 'C:\GitCode\Resi\ResiTrader\ResiCloudService\..\..\WebContent\bower_components' in role Web.
The SourceDirectory element also does not expand environment variables unless they are SYSTEM environment variables like %PATH%. Ideally I think what customers want is the ability to pull the project down from source control and build the deployment package
without the need for an administrator to adjust SYSTEM environment variables.

E-REC alias

Similar Messages

Maybe you are looking for