E-rec: Can we delete a Job Posting?

e-rec experts,
Our users inadvertently create Job Postings in the Requisition. We need to get rid of the unwanted postings. Is there a way to delete Job Postings.
-Dominic

Hi ,
When you put the status of a posting into 'To be deleted' it will no longer appear in the requisition.But the
entry still exist in the infotype HRP5121 ( posting information ) .The status will be set to 3 ( To be deleted ) .If you want to delete an job posting from HRP5121 then the corresponding requisition also need to be set to status 'To be deleted ' .Then the administrator can delete the requisition using
the service 'Delete Requisitions'.
Thanks,
Ramprabhu

Similar Messages

How can I delete printed job list Delete jobs grayed

How can I delete printed job list Delete jobs grayed

Apple lets you see a list of what is printed out but there is no way to erase the list and mine is two years of all that printed out. I want to erase it but there is no place to get rid of the list or the items on it. Epson said it was an Apple problem. Apple doesn't seem to know the answer. You can only delete jobs when it is not grayed out and it is usually for those you have not printed . I am hoping someone can figure it out.

How can I delete error job of SLT ?

Hi experts,
I have the SAP ECC 6.0 on MSSQL and HANA DB.
I replicate some data from SAP ECC to HANA DB using SLT.
Now I'm facing a problem.
I failed one load job by preparation error.
In tr-cd:ltr , statistics tab , the target table were appeared as error.
I want to delete this error job.
Because of this error job has been left, I can't re-load the target table.
Please tell me how can I delete this error job ?
Thanks in advance.
Best Regards,
Kazuki

Hi Kazuki,
Please go through with below blog you will get
SAP HANA - SLT suggestions (brainstorming blog)
SAP SLT (Trigger Based) Replication Made Easy - part 2: Post-Installation
BR
Atul

HP Connect vs Eprint can't delete print job causing log jam

I have used eprint for years and recently been transfered to HP Connected.
In Eprint if a job failed to print following jobs would not print until the problem job was deleted.
In HP Connected I can tick the box for the job causing the problem but the delete (and other options) at the top remain unshaded so it does not allow that job to be deleted. This means I cannot clear the log jam.
Do I need to resort to making a new email for the printer and starting again ?
Any help much appreciated, I tried HP customer help but haven't had any luck so far.
Joel

Hi Joel. To enable full use of the Collections tab, you should have received an email to 'confirm your email'. Have you received this email from HP Connected and clicked the big orange button?
The other factor, is that the jobs in the queue that are 'stuck' will most likely have to fail before they can be deleted. You will not have to get a new email, but you will have to figure out why they are stuck.
The hpconnected site will show you your printer status on the devices tab. Does it say you are online and ready?
You can turn off your printer (unplug it). Pull the plug on your router for 10 seconds or so and then plug it back in. When the router returns to life, power on the printer. When the printer comes back online you need to print an 'info page' or web services report. This can fix this sort of behavior. The process can vary from printer to printer (depending if it has an Eprint button, or Web Services Icon on the front of the printer). What is the model number of printer?
Here is a document helping you find your model number: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bud09626
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How can I delete completed jobs in printer window?

I cannot delete any completed jobs in the printer window. There are now 265 completed jobs sitting there. How can I delete them? Delete button doesn't do it. Is there another way?

Hello John,
I don't have any direct suggestions for you, but I may be able to point you to an older thread where you might find a potential solution. Check this older thread out.
http://discussions.apple.com/thread.jspa?threadID=1511428
B-rock

Delete SPI* Jobs

Hello
I have just turned off PMI monitoring in XI system.
No i can see some jobs being triggerred in XI system under my ID.
$SPI_TRANSPORT
SPI_CCMS_DS_AGENT_800
SPI_CCMS_DS_PROAJOB_800
SPI_REORG_CS
Is this related to the turn off of PMI from RWB? Can i delete these jobs, will it affect any existing setup?
I would greatly appreciate your quick response on this.
Thanks and Regards
Dhanish Joseph

Hi,
Check the link..
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50]
Regards,
Prakasu.M

Cant delete active JOB from SM37

Hi guys, i need to delete a job from sm37, when i try to do it the following msg is displayed.
cant delete HR job, the job status is active.
When a job is deleted, a check is made as to whether the job does not
currently have the status 'active' of 'ready'. It would cause
unquantifiable problems if a job with this status was deleted. This
message indicates that the SAP system has already started the job to be
deleted.
any ideas?

Hello,
In SM37 try to stop the job before and if doing it you can't delete the job, go to transaction SM50 and try to stop it here (Process->Cancel withot core).
Regards.

Delete background job

Hi All,
I have defined a background job. This job is executed after an event. Now I want to delete the job and create another job with different name. How can I delete this job. Please explain me with steps.
Regards,
Jeetu

1. Go to SM37
2. Select Scheduled and Released
Remove the Date fields
Choose the Event which triggers the Batch job from the After event filed Drop down Box and Execute
3. Select the Job and delete

Delete Background JOB permanently.

Dear All,
How can i delete schedule background Job which is defined in SAP Systems,
when i check through sm37 i found that there is one job schedule on hourly period & showing status Cancel,.,
JOB Name is SAPOSCOL
also please find details of this Job,
Massage Text
JOB Started,
Login of User basis in Client 800 failed when starting a step.
How can i delete this job permanently.
Regards,
Jiitendra.

Hi,
The job is getting cancelled because the login BASIS with which the job is scheduled is failing to start it and this might because the ID is locked or password expired. Kindly check that to resolve the issue. But, if you want to delete the job then do it as said above by selecting the job with scheduled or released status.
Regards,
Sharath

Deleting Periodic Job

Hi All,
I have a periodic running job SWWDHEX which runs every 3 mins and this background job is getting cancelled.I want to delete this job permanently.i tried using "delete" option from SM37 and tried running the program RSBTCDEL but still the job keeps on running periodically.
Please Help..
Regards,
Priya

Hello Priya
Actually, this is workflow job which is running on every 3 minutes, you can delete the job who has status "release" in sm37->job overview screen.
The Program "RSBTCDEL" SAP_REORG_JOBS , you can also delete the job from there with providing the complete parameters with the selection of release flag.
Regards
Anwer Waseem

E Rec - Object Data, Job posting, publication

Hi Gurus,
I am started to E rec and need clarity on below points, pls assist with your quality inputs.
- Where is e rec object data stores (Candidate/Applicant/Postingetc) Is it 5* IN viewable through PB20..
- If object data is stored in IN 5* then what is the role of Business Partner?
- The placement & fields of application can be custmised but our client is looking for total change so would this call for IN enhancement also along with UI enhanc. (Actually client wants to view candidate data filled and visible in a prescribed format)
-Can the job posting fields and details publish be customized. (Client wants more fields and specification visible in published job posting & customise the appearance as per channel.)
Thanks in advance.
Regards

Hi,
- Where is e rec object data stores (Candidate/Applicant/Postingetc) Is it 5* IN viewable through PB20..
Ans:
E-recruiting Infotypes cannot be accessed through PB20. In order to access 5* ITs you have to access hrp5* tables.
Go to this link to view all the e-recruiting infotypes:
http://help.sap.com/saphelp_rc10/helpdata/en/e1/401aeb8dbe0649ad06d92eac102552/frameset.htm
- If object data is stored in IN 5* then what is the role of Business Partner?
Ans:
Not all data is stored in Infotype 5*. For E.g. Whenever a new candidate registers Object type NA is created. NA is linked through relationship A/B 650 to CP and CP to BP through relationship B207. Candidates's name, date of birth, address etc. (personal and address data) is stored in object type BP.
Also if an you are creating an agency, the details are stored in BP.
- The placement & fields of application can be custmised but our client is looking for total change so would this call for IN enhancement also along with UI enhanc. (Actually client wants to view candidate data filled and visible in a prescribed format)
Ans:
Refer to the link given above. All the standard fields in the Infotypes is given. If your customer requirement is above these standard fields then Infotype enhancement would be required.
-Can the job posting fields and details publish be customized. (Client wants more fields and specification visible in published job posting & customise the appearance as per channel.)
Ans:
Yes it can be. Job Posting field's data is stored in posting infotype. But labeling of the field is OTR text. For example if you want to change the labeling Company you will have to go to transaction sotr_edit and search for PAOC_RCF_UI/company and enhance it.
But this will not get reflected in the publication. Publication are adobe forms (in SP5 and above(if i am not wrong)). If you want to use your own publication then develop the adobe form and assign it to the interface parameter FORM_PUBL_INT_DOVR or FORM_PUBL_EXT_DOVR (technical settings>User Interfaces>Administrator and Recruiter>General Settings>Assign Values to Interface Parameters)
Regards,
Pradeep

Can't delete jobs from Sun Update portal

I am unable to delete jobs from the Sun Update Connection portal. Here are the steps I take:
o Click on Jobs page. I have 186 pending jobs.
o I select a few of them and click on "View Jobs"
o I select the jobs and click on "Cancel Selected Jobs"
o I click on Yes when asked for confirmation.
After that I get the message below saying jobs were NOT cancelled:
"The following jobs were NOT cancelled."
Any ideas why I can't cancel any jobs?

HI,
This is still an issue and I would appreciate any help i could get. I don't want to reinstall the server including six zones.
Anyway, this is what i have done.
1. I removed the server from updateconnection
2. Waited 24 hours
3. Installed all patches using the script provided in another thread (http://forum.sun.com/thread.jspa?forumID=275&threadID=27716) This seem to be the only way to patch a system with zones
4. Logged in to updateconnection to verify that no servers were registered
5. Registered again using update manager
Now updatemanager shows 22 available updates but when i log in to updateconnection it shows 0.
This problem has been bugging me for quite a long time now and I would aprreciate if Sun could make an official statement about patching systems with zones. Is it supported or not?
In my particular case what would you recommend me to do?
Thanks
R

Can't Delete Oracle Database Job

i created an oracle database job and some of them is only a sample test job. i need to delete them but the delete option is not enabled. it looks like all the other oracle database job that i created can't be deleted. please advise thanks.

it does not have. i guess a dependencies should not cause the problem because other jobs that does have dependencies can be deleted. it is only the oracle database job that can't be deleted. thanks.

I can't delete or cancel a print job

I sent a photograph to print on my HP Photosmart B209-am printer. When I waited over an hour for it to print and nothing happened I tried to delete it. The status has said "deleting" for several hours. I have run task manager to cancel, I have rebooted my Windows 7 64bit PC, and restarted the printer. Nothing will delete the print job. What can I do next? I can't print anything else until this is resolved. Thank you!
This question was solved.
View Solution.

Hi,
From the control panel, open administrative tools and select sevices. Browse down to the print spooler service, right click it, select Properties and then click on the stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder. Reboot the computer and you should be ok.
You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Hope this helps,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

E-Rec Internal & External Job Posting

Hi,
In my e-recruitment system I am trying to create a job posting that is visible to both Internal and External candidates.
I have tried leaving Cand Class field blank in "Define Posting Channels" but this just results in my posting not showing up anywhere.
Can anyone help please?
Thanks
Jon

Hi,
the E-Recruiting internal and external search is hard programmed on channel 0001 or channel 0002.
Therefore customer based channels cannot be used with the standard search scenarios at all.
As a conclusion you cannot create combined channels for internal and external search at one time.

E-rec: Can we delete a Job Posting?

Similar Messages

Maybe you are looking for