E-Rec ,Candidate Appears twice in fast search

Hi
We are using Standalone E-rec system EHp4 , Done with all the ALE Related configuration for Data Transfer b/t  ECC to E-rec System , While Running PFAL(RHALEINI) for the first with the object type 'P' we missed to update the infotype 0006 , subtype 1 , we ran the PFAL for the object type 'P' for all the employee in Insert mode , we uploaded again infotype 0006 subtype 0001 in ECC system and Ran the PFAL again with the object type 'P' in insert mode for all the Employees .
After that to synchronize the data we ran Report HRALXSYNC in e-rec system , furher moving on we check the candidates in the Fast search application , there i can able to find two record for each internal candidate , but when we check the Relationship CP-P , CP-BP, CP-US all exists only one .
further to confirm this i Ran the PFAL for only one employee with insert mode , and again i could be find 3 entries in the fast search , increased by one .
Regards
Arumugam .

If you are sure this problem will not occur again in the future, then you can run the standard webdynpro application DELETE_EXTERNAL_CANDIDATE in e-Recruiting system to get rid of the duplicate candidates....
This application will delete the candidate completely from the system, including all the CP and BP objects and relations.
I hope this will help...

Similar Messages

  • Loops appear twice in the loop browser. Huh?

    I just installed iLife '06 and have been "messing around" with the various programmes. One thing I noticed was that exactly the same loops appear twice in the loop browser. Not all loops are doubled, which is obviously what is confusing me. Is this normal (not my confusion!!)?
    I've checked the folder in the library and each loop is only available once, but GarageBand insists on having two of quite a number of loops. Any tips would be greatly appreciated, as I haven't found any way to delete just one of the loops (deleting the file obviously deletes both . . .)
    Thanks in advance,
    Steve
    G5 Dual 2.3, G4 Powerbook   Mac OS X (10.4.3)  

    Do you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
    - the general Library/Audio folder
    - the user Library/Audio folder
    - the general Library/Application Support folder
    - the User Library/Application Support folder
    Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
    In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser.

  • Lync 2013 user appears twice in Lync, once with all features, a second time with only the option to make a voice call

    Hi,
    I'm using 15.0.4551.1007.
    A user appears twice in my contact search but in the second instance he has a phone icon and I can only make a video call to the user.
    His contact card only shows a phone number in 'Other'.  The number appears in his other contact card but not in the same format.
    I suspected he is somewhere in my contacts but a search found nothing.  He's not listed twice in the Exchange GAL either.
    Where can Lync be getting this information?  it doesn't happen to every user and he's enabled the same way as everybody else in Lync.
    Thanks,
    rudif

    Open Lync option, click Personal tab. Choose None under Personal information manager.
    Then sign out and sign in to check if you can see the contact twice for the specific user.
    Please also check if other users have this issue. If they do have, the problem locates on the address book server or Active Directory.
    If only you have this problem, try to delete the Lync cached file for you user.
    Lisa Zheng
    TechNet Community Support

  • Document Number appearing twice.

    Hi Experts,
    In one document, particular line item of vendor payment is appearing twice with same document number, document type is KZ when checked in FBL3N. User, Date, Time and amount are identical. When checked Vendor account for the same, there is only one line item with respect to above. This is a special G/L transaction as Advance payment.
    I also checked Table GLT0 for the same, there is only one entry.
    Can anyone advice me, what could be the error for double entry in FBL3N & how to rectify it ?
    Madhu.

    Hello,
    Document numbers are linked to time stamp. There cannot be double doucument numbers with the same number time stamp.
    Please recheck your criteria.
    However, you can search service.sap.com for "Overlapping of document numbers"
    Regards,
    Ravi

  • Single artist is appearing twice in My Music

    One artist, one album, saved in one folder on my PC. Yet she appears twice in My Music. In one of the appearances there is one track, in the other are the rest. They both appear in My Music with the same artist name and same album name.
    How do I merge them into one?

    *HowTo: Grouping Tracks Into Albums*
    Excuse the long post, but hopefully covering all the bases (that I can think of) will help you fix the other issues you are likely to run into as you try to organise your iTunes library.
    <hr>
    *Use an album friendly view*
    iTunes will let you sort music on many columns, some of which are unlikely to group albums together or put the tracks in their normal order. The most useful order for editing the library is probably the *List View* organised as *Album by Artist*. If you're not already there, select the list view and click on the column heading for Album until it reads Album by Artist. If the items you're trying to gather together are still scatted through the library use the options in the *Search Box* to narrow down the results until you can see the items you need to edit. You can also use the *Browser Pane* (View > Show Column Browser & View > Column Browser submenu) to display lists of Artists, Albums, Genres etc. Selecting one or more items in these columns will focus the track listing on matching items.
    !http://www.samsoft.org.uk/iTunes/section1.png!
    <hr>
    *One cover, too many tracks*
    The iPod (and iTunes to a lesser extent) conflates two or more albums with the same title, most obviously with *Greatest Hits*. On the iPod this can result in one album acting as a combination of two or more. Selecting any cover gives all the tracks of all albums with the same title. See below how selecting either of two distinct albums with the same title gives a track listing which is a combination of both albums The workaround for this "Greatest Hits" bug is to give each album a unique title - I tend to go for *Album - Album Artist* as this reads clearly in the iTunes browser. Alternatively you could use the wording as it appears on the cover or append different numbers of spaces for each different album. Somewhat oddly, setting different values for Sort Album doesn't work.
    !http://www.samsoft.org.uk/iTunes/section2.png!
    <hr>
    *Missing Artist or Album not with others by same artist*
    iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. It also seems that the iTunes Store may mark an album as a compilation in order to keep it grouped when there are tracks with guest or featured artists. However, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the *Album Artist* and then set *Part of a compilation* to No.
    !http://www.samsoft.org.uk/iTunes/section3.png!
    <hr>
    *One album, too many covers*
    For true compilations, where each track is by a different artist, the answer is to set *Part of a compilation* to Yes and enable the iTunes preference to *Group compilations when browsing*. If the album is not a compilation however, any tracks which list guest artists may be treated as separate items. Filling in the Album Artist field is enough to link things in iTunes. Sadly, however, most iPod models ignore the Album Artist field when grouping albums so this is only a partial solution. You can simply mark the entire album as a compilation which seems to be the way iTunes often handles it, however that's not an ideal fix. Short of waiting for Apple to address this issue (and as far as I can tell it goes back to the 1st gen. of iPods) we need a workaround. What I do is to put any additional artist info. in square brackets after the song name. E.g. *Track \[Feat. Guest\]* and then set *Artist=Album Artist* for each track. For anthologies where the Album Artist is credited as part of another group, e.g. for Cream tracks on an Eric Clapton anthology, I use *Track \[As Group\]*. For a track where the main Album Artist doesn't receive a credit, e.g. the first track of the Slim Shady LP credited to Jeff Bass, I just set the track name to *Track \[Guest\]* while still setting the artist to the album artist. N.b. I use square brackets to indicate that this is information about the track as distinct from parentheses in the song title and also use this style for Mix/Live/Bonus info.
    Since firmware version 3.x the iPhone & iPod Touch do in fact use the Album Artist field & have stopped grouping on the part of a compilation setting, however setting both *Part of a compilation* to Yes and the *Album Artist* to "*Various Artists*" will group compilation albums both in iTunes and whichever type of iPod/iPhone you happen to be using.
    !http://www.samsoft.org.uk/iTunes/section4.png!
    <hr>
    *One album, still too many covers*
    iTunes may split albums into two or more sections if some tracks from the album have different values for Artist, Album Artist, Album, No. of Discs or Part of a Compilation. Tiny differences such as trailing spaces, accented characters or variants of symbols can sometimes be quite hard to spot. The iPod is also more sensitive to case variations and may split or reorder an album that looks okay in iTunes. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. When this happens I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
    !http://www.samsoft.org.uk/iTunes/section5.png!
    <hr>
    *Tried that, there are STILL too many covers!*
    The Sort Artist, Sort Album & Sort Album Artist fields can be used to override the normal sort order. For example iTunes automatically drops leading articles (a/an/the) so "The Beatles" are arranged under "B" instead of "T". Occasionally different tracks from the same album can have different values in these sort fields which can also break up the grouping. Making the sort columns visible in iTunes can help with spotting & correcting such problems.
    !http://www.samsoft.org.uk/iTunes/section6.png!
    <hr>
    *One cover for multi-disc album*
    Multi-disc albums are often listed as *Album (CD1)* for CD 1, *Album (CD2)* for CD 2 etc. To display these properly using just one cover, each disc should have the correct *Disc X of Y* values set, and then the entire album should be given the single title Album. Being somewhat obsessive I also renumber the tracks sequentially, working backwards from the last track (so that no two tracks ever have the same number) until I reach disc 1. You can still give tracks from the individual discs different artwork should it be relevant so that the correct artwork will be displayed as the album progresses.
    !http://www.samsoft.org.uk/iTunes/section7.png!
    <hr>
    *Tracks out of sequence*
    Check that all tracks have the same/correct disc no. For a single disc album this should be either blank (my preference) or 1 of 1. iTunes will sort tracks with a disc no. of 1 before those that are blank. Just for fun the iPod sorts them the other way around so an album that is correct in iTunes may be out of sequence on an iPod or vice-versa. In addition ensure that the Artist, Album Artist, Album, Sort Artist, Sort Album Artist & Sort Album fields are consistent across all tracks.
    !http://www.samsoft.org.uk/iTunes/section8.png!
    <hr>
    *One artist, many names*
    With some artists, particularly classical composers, you should be aware of alternative representations of their names. E.g. 2Pac vs. Tupac. The menus will work best if for each artist you standardise on just one form of their name. E.g. make a choice between Mozart, W.A. Mozart or Wolfgang Amadeus Mozart, and then apply it consistently. For classical music I tend also to use the Composer as the Artist & Album Artist and either discard the performer details or place these into the Comments field. In some cases the Sort Artist/Sort Album Artist fields can group alternate forms in iTunes but these will break up again on the iPod. It is best therefore to use Artist & Album Artist consistently so the name is shown the way that you want and Sort Artist & Sort Album Artist to control where it is displayed.
    !http://www.samsoft.org.uk/iTunes/section9.png!
    tt2

  • Favorite themes appear twice in the Themes window

    Whenever I save a theme as a favorite, it appears twice in my Themes window. When I click on each duplicate instance of any given theme in the Themes window, it seems to produce the same result, so operationally it's not a problem. Still, it's a nuisance to have to scroll through twice as much stuff to find what I want, and it doesn't seem right that each favorite should appear twice.
    I've searched my drive for two instances of each .favorite file, but I can only find one instance, located in *~/Library/Application Support/iDVD/Favorites*.
    I tried trashing the preferences file, but when I re-opened iDVD, I got the following prompt:
    +*Project Duration*+
    +Your project exceeds the maximum content duration. To burn this project, remove some content.+
    That's nonsense. I had already "burned" (saved) the project to a disk image, and it burned just fine. Besides, the project is shorter than other projects I've burned with no problem. The upside of having replaced the preferences file is that the double instances of my favorite themes were gone.
    I had saved the old preferences file, so I restored that and trashed the new one. That got rid of the bogus Project Duration message, but now I'm back to double instances of my favorite themes again. There is definitely something screwy going on with iDVD.
    Can anyone help?
    Thanks!

    Never mind...I solved it. When you trash the preferences file and iDVD creates a new one, it automatically selects "Best Performance", which naturally increases the filesize of the disk image file. It's sufficient to just acknowledge the Project Duration message and then go into Preferences:Projects and change the Encoding to "Best Quality". That fixes project duration problem.
    Actually, there's a far more serious problem with "missing themes", but that will be the subject of another thread if the complete reinstall of iDVD I'm doing now doesn't solve it. Grrrrr......

  • ITunes library appears twice in folder

    Hello -
    My iTunes library seems to appear twice in my Home>Music folder. The second time they are duplicated but all tunes at higher quality than I'd downloaded the previous set. Can I delete the duplicate set?
    Thanks...

    do you know where on your machine the files are at (start in "my computer", then into your hard drive, and so on)??? If you do then make sure that the directory that itunes has for your music is the same as where they are actually at. If you can't find them do a search for "all files and folders" using an audio extension such as .mp3 or .aac and see if you can locate where they are at.

  • Email signature appears twice

    Hi all. I have recently started using Mail to run my new business email, and set up an email signature. All of a sudden it seems to be putting the signature in each mail twice. I have checked the signature setup and it's fine - doesn't appear twice. I've searched the forum but haven't seen this problem come up before. Any suggestions.
    Thanks in advance

    I have the same issue in Mail.app on the Mac. When I get emails from Outlook users that have images in the signature, the image appears twice.

  • Calendars and Contacts appearing twice on iPhone

    Since upgrading to OS 3.0 on my iPhone 3G I am finding that all my iCal events are appearing twice in the Calendars app.
    And when I do a spotlight search on the iPhone, I find that contacts are listed twice.
    I am a mobileMe user, and use mobile Me to sync my info to the phone over the air, rather than syncing calendars and contacts via iTunes.
    Is anyone else having this info aear twice? Any ideas on how I can get the duplicate info to disappear?

    Do you have MobileMe? This occurs if you sync Calendar with your Mac iCal AND MobileMe, with both having the same listings. You get duplicates with Contacts for the same reason. If you open Calendar and touch the left arrow to show "Calanders" you'll find 2 copies, merged in "All"
    To get rid of the duplicates:
    1. Settings > Mail, Contacts, Calenders > Accounts > MobileMe > Calendars > Off
    You'll get a warning: "There are existing calenders synced with your Mac. Would you like to merge them with your MobileMe account?" Choose "Do not Merge". You then are asked what to do with the existing calenders on your phone - select "Delete."
    2. Connect your phone to iTunes and go to the "info" tab of your device page and disable sync contacts with your Mac.
    3. Settings > Mail.... > Accounts > MobileMe > Calendars > ON. It will take a few minutes to re-sync the calender without duplicates.
    If you also have duplicates in Contacts, go though the same process.

  • Fast Search Broke - Drive full "stuck in a loop"

    Hello,
    We have SharePoint 2010 with FAST Search enabled.   Content crawls completing without issue, but the index data drive is filling up and then "dumping" over and over again.  Users are now starting to notice that content
    is not showing up.   This all just starting happeining about month ago.  All components appeared to up and running.  Any help would be much appreciated.
    Thank you,
    Jim

    We've added more disk space to the index server (Primary and Secondary) and now it has calmed down.  Now it appears that we are missing items in our search results.  Running indexerifo -a status still shows about 40K items not indexed. 
    That number is falling slowly but users are starting to complain that items recently uploaded are not searchable even after an incremental crawl.    Some items show up and some don't.  We've opened a ticket with MS and are looking
    at it now.

  • SCCM 2012 SP1 - Software Center appears twice in Start Menu

    Hi guys,
    i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
    the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
    are always in the same language.
    The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
    deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
    Has anyone ever seen this? See a screenshot below:
    Thank you.
    Cheers
    Stefan

    Thanks for your Response Thomas.
    I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
    was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

  • Same genre appears twice in my iPhone 5s.

    Why does the same genre (Alternative) appear twice in my iPhone 5s. Both Genre listings in the phone show the same # of songs and minutes.
    What I've done thus far:
    1. removed "Alternative" genre from all songs in music library
    2. synced iPhone and both Alternative Genre we removed on iPhone under Genres
    3. made sure the Genre spelling on all songs is correct and the same in iTunes
    4. re-synced iPhone and again both Genres Alternative appear.
    Then tried this:
    2. connected iPhone to iTunes, went to iTunes / iPnone > settings > music and verified under "Genres" that Alternative only appears once in the Genres section
    3. on the iPhone settings > music > insured "Show All Music" was turned off
    4. on the iPhone settings > iTunes & App Store insured "Show All" > music was turned off
    5. unchecked Sync Music and selected remove all music then synced iPhone, verified all music and all Genres on the iPhone were removed
    6. ejected iPhone did a hard reset on iPhone verified both "Alternative" Genres were deleted.
    7. connected iPhone to iTunes, went to iTunes / iPnone > settings > music and re-selected Sync Music and synced
    8. STILL TWO LISTINGS OF ALTERNATIVE GENRE ON IPHONE AND HAS THE SAME # OF SONGS AND MINUTES.
    * note no other Genres have duplicate listings and there are a total of 9 other Genres. Of those 3 are custom names.
    Help please...
    Thank you in advance.

    Is the phone unlocked and available to you? Have you notified your carrier of this change?

  • Sharepoint Fast Search vs SQL server fulltext index

    HI ,
    I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
    Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
    Thank you.
    James

    Please have a look at these links:
    SharePoint Search and FAST Search for SharePoint
    Architecture Diagrams – Fault Tolerance and Performance
    Understand
    FAST Search Logical Architecture for SharePoint 2010
    Full-Text
    Search Architecture
    sqldevelop.wordpress.com

  • What is the different between Sharepoint fast search service and Sql server fulltext search?

    HI ,
    I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
    Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
    Thank you.
    James

    They are very, very different beasts.
    Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
    SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
    outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
    and tables.
    Can you run SharePoint purely for Search? Yes, definitely.

  • How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?

    How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?
    All I need is ONE INBOX (like Windows Mail used to do) ...
    I can see in the 'Account' column of each message which email account it's using.
    Then, I either junk or read the message, followed by delete or file to one of my created folders.
    As it is, half my page is depth is taken up by 12 lines of Account names !!!

    That still leaves SIX lines of Account names down the side. All I want is ONE INBOX ... (I can see which account each message belongs to in the 'Account' column...)

Maybe you are looking for