E-Rec: PA40 to hire

Hello Experts,
I am on implementation project of SAP E-Rec, with Ehp5 where E-Rec is on different box. As its the new system which we are trying to setup. I just want to know till we create ALE and setup ECC box, can I use E-Rec box to hire employees (P object)? As currently it just returns error.
I have already referred basic note: 997181, still have concerns. I just want to use the portal to see how Recruiter, Recruiting Administrator tabs can work. However, I get errors. Can anyone guide a wayout?
Thanks,
Beginner

Hi,
in advance I am not fully sure if I understand your question correctly.
If you want to work with eRecruiting in any functional role (apply as candidate, recruiter, manager, ...) you must have a candidate. These candidates are in a production scenario created via registration for externals and via HR Core -> eRec integration for internals.
As this integration for internal is usually not available on project start there is report RCF_CREATE_USER to create a candidate for the implementation team. No PA* transaction here.
In the usual installation scenario for a standalone eRec landscape you use the I2A variant (also mentioned in note 997181). In this variant the eRec system is a WebAS ABAP with only the eRecruiting component installed. So there would be no PA40 at all.
Kind Regards
Roman

Similar Messages

  • Employees are not listed in PPOME or HIS ?

    Hi,
    I used BDC to migrate personnal data with PA40 . ( Hire person where I fill the position ) , But then I can not see that person in PPOME or reporting tool HIS , Although these persons are assigned well with approriate position & Org unit . Even I check PO13 for the positions , There is no person there !!!!
    So is there any problem with my config ?
    Thanks

    Hi,
    Check next steps
    IMG>Personnel Management>Organizational Management>Integration>Integration with Personnel Administration
    1. Set up Integration with Personnel Administration
    2. Transfer Data from Personnel Administration
    3. Prepare Integration with Personnel Administration
    4. Transfer Data to Personnel Administration
    5. Check Integration Consistency
    Before you run any of reports please read documentation available.
    I would recommend "step 2:Transfer Data from Personnel Administration" not to be executed if not needed because it could mess up you OM data if not run correctly.
    Check the others and let us know the result.
    Regards,
    Ani

  • LSMW fails when run in B/G works fine in Frontend..why?

    Hi All,
    i am trying to runa batch process by LSMW, my files are accurate, no problem with them, everything works fine but it fails when run in BG..works absolutely fine in front end. whats the diff with running in B/G?
    same thing happens when i am trying to execute an RFC thru SAP JCO, it works when debugger is on 9i guess switching on debugger is similar to running in B/G) but it doesnt work when debugger is off. but when i execute that RFC directly in se37 from SAP gui it works fine..fails when connected to JCO..
    i am not having this issue with r/3 4.6c or mySAP ECC.6.0  i have this issue only in r/3 4.7.
    has anyone faced the similar situtaion? pls help.
    thanks.
    p.s if this may help. the RFC and LSMW error both are pertaining to change in address of US employees.( infotype 0006)

    for LSMW its the recording of transaction PA40 (employee hire fails when filling  address details) and PA30 (change address) and same is the case with RFC..well its a BAPI_ADDRESSEMPUS_CHANGE. 
    To eloborate more..the error is..Fill in all the mandatory fields.
    which i am very much doing..there are no hidden fields or anything..i have seen the screens etc..I AM filling all mandatory fields. infact i am not leaving anything unfilled., same scrren is going fine when in front end..i am just clicking ok..ok..ok and boom transaction complete..no complaints. but running B/G is killing me.
    i have to run batch for 100,000 employees
    What fails my logic is..its working fine in 4.6c and mySAP ECC.6.0 but not in 4.7
            Hruser
    Message was edited by:
            Hruser

  • Transaction PA30

    Hi,
    I amnew to SAP HR.Can you tell me the use of Tcode PA 30. I think that it is used to enter the master data of an employee.But not sure how to create the employee. Please provide some information on that.

    Logic of PA30 & PA40
    1)PA30 for master data maintainence (All data entered in PA40 via infotypes avilable in master data)
    2) PA40 New Hire
    Purpose
    Appropriate departmental personnel will use this process to hire a new main campus employee. This transaction is used for all new hires (except Hospital new hires) regardless of the type of employee, i.e., regular staff, faculty, temporary, student, etc.
    Beginning with the Personnel Actions screen (PA40 transaction), IRIS takes you through a series of Infotypes (screens of data) to be completed. The screens displayed will depend on the particular personnel action you select on the Personnel Actions screen.  The completion of one infotype prompts the appearance of the next one.
    Trigger
    A new University of Kentucky main campus employee has been hired. Use this transaction to enter information about the employee into IRIS.
    Prerequisites
    None
    ·         xxx
    ·         xxx
    Menu Path
    Use the following menu path(s) to begin this transaction:
    ·         Select SAP Easy Access Menu: Human Resources à Personnel Management à Administration à HR Master Data à PA40 - Personnel Actions.
    Transaction Code
    PA40
    Helpful Hints
    Infotypes in the IRIS system are logical groupings of data. IRIS organizes the groupings into Infotypes. The following Infotypes are entered by the user:
    0000 Actions
    0002 Personal Data
    0001 Organizational Assignment
    0006 Addresses
    0007 Planned Working Time
    0008 Basic Pay
    0041 Date Specifications
    0077 Additional Personal Data

  • User-Exit at Save for KL01

    Hi,
    Is there any user-exit at save for transaction KL01.
    Here is my requirement.
    Where ever am employee is hired in HR ( transaction PA40; Action = Hire) i have to automatically create an Activity Type ( t.code : KL01 ). I am doing this in user-exit PBAS0001, component EXIT_SAPFP50M_002 on HR side.
    The next this is, once activity type is created using transaction KL01, i have to automatically trigger a activity type planning, transaction KP26.
    So, i need a user exit at Save in transaction KL01, so that i can trigger KP26 from there. I found one exit COOMKS02, but i its not triggeting from KL01.
    Does any one know any user-exit in KL01 which trigger at save. Please let me know
    Thanks,
    Pratik

    Hi Sharad,
    Thanks for your reply.
    I always have an option for executing both KL01 and KP26 fron PBAS0001, but what i was thinking that if there is any exit available at save in KL01, i can trigger KP26 from there.
    If i could not find any exit, i will call both KL01 and KP26 from PBAS0001 itself.
    Thanks,
    Pratik

  • Problem in Workflow triggering

    Hi,
       I am using BOR EMPLOYEET and Events
    1. COMPANYLEFT.
    2. HIRED.
    3. REHIRED.
    4. RETIRED.
    to trigger my workflow.
    In SWEHR1 I have maintained the Business Object and in SWEHR2 I have given the entries for all the four Events.
    Now when I go to PA40 and Hire a Employee my workflow is triggering for all the Events, but it should trigger only for the event HIRED.
    Thank you,
    Ramu N.

    Hi,
    I think that your system works exactly as it is customized. If there are 4 entries in change on IT0001 without function module, 4 events are probably getting triggered with as many as receivers, also activate event trace to see if this is indeed the case.
    So either change the settings in SWEHR2, or add your own function module behind the settings, or change the event linkages in SWETYPV.
    If in doubt press f1 on the fields in SWEHR2 and in SWETYPV, I think it's well documented.
    Kind regards, Rob Dielemans

  • Cx_hrpa_invalid_buffer_access

    I've been checking the SAP Notes but so far haven't found a solution to my issue, so I thought I would post it here. We have CE implemented and turned on. Currently during the hiring action, we are having the following problem.
    PA40-->New Hire
    Type in basic employee data click save
    Enter Action (hire, prefilled)
    Enter Reason (select reason)
    Enter Position/org info/ area subarea eg esg...
    Upon saving, we get "do not select subtype" message with GREEN indicator
    Click save again, we get a short dump with the following messages
    CX_HRPA_INVALID BUFFER ACCESS
    CL_HRPA_MASTERDATA_BUFFER=====CP
    an exception occurred that was not caught in procedure create virtual IT0001 NEW IF
    reason for exception is
    Infotype record &PSKEY:a structure &A already exists.
    Can any ABAP person out there please tell me what this means and how I can fix it?
    Much thanks!!!

    Hi Rachelle,
    We're having this exact problem in our system when doing hiring actions from HCM Processes & Forms. We have debugged alot and found that it tries to read from "a_buffer_table" with SPRPS (locking indicator) value 'X'. However, in the buffer table, the SPRPS values are blank and it gets nothing back.
    We get the same error message as you, and wondered what you did specifically to resolve the issue.
    Hope you can take the time to answer my question.
    In advance thanks!
    Best Regards,
    Hans Petter Bjørn

  • Refcursor output in sqldeveloper

    Hi,
    Can you pls let me know how to view the refcursor output using sqldeveloper?
    Regards,

    Sure.
    satyaki>
    satyaki>select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
    PL/SQL Release 10.2.0.3.0 - Production
    CORE    10.2.0.3.0      Production
    TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Elapsed: 00:00:00.16
    satyaki>
    satyaki>
    satyaki>create or replace procedure gen_cur(str in varchar2,rc in out sys_refcursor)
      2  is  
      3    str1  varchar2(500);
      4  begin  
      5    str1 := 'select empno,ename,hiredate,sal           
      6             from emp           
      7             where '||str;              
      8            
      9    open rc for str1;  
    10  exception  
    11    when others then    
    12      dbms_output.put_line(sqlerrm);
    13  end;
    14  /
    Procedure created.
    Elapsed: 00:00:10.03
    satyaki>
    satyaki>declare
      2   type a is record
      3    (                   
      4      empno    number(4),                   
      5      ename    varchar2(30),                   
      6      hiredate date,                   
      7      sal      number(10,2)                 
      8    ); 
      9   rec a;   
    10   b sys_refcursor; 
    11   src varchar2(300);
    12  begin  
    13    src:= 'sal between 2000 and 7000';
    14    gen_cur(src,b);  
    15    loop    
    16      fetch b into rec;     
    17      exit when b%notfound;           
    18      dbms_output.put_line('Employee No:'||rec.empno||' - '||                          
    19                           'Name:'||rec.ename||' - '||                          
    20                           'Hire Date:'||rec.hiredate||' - '||                          
    21                           'Salary:'||rec.sal);  
    22    end loop;  
    23    close b;
    24  exception  
    25    when others then    
    26      dbms_output.put_line(sqlerrm);
    27  end;
    28  /
    Employee No:7566 - Name:JONES - Hire Date:02-APR-81 - Salary:2975
    Employee No:7698 - Name:BLAKE - Hire Date:01-MAY-81 - Salary:2850
    Employee No:7782 - Name:CLARK - Hire Date:09-JUN-81 - Salary:4450
    Employee No:7788 - Name:SCOTT - Hire Date:19-APR-87 - Salary:3000
    Employee No:7839 - Name:KING - Hire Date:17-NOV-81 - Salary:7000
    Employee No:7902 - Name:FORD - Hire Date:03-DEC-81 - Salary:3000
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.61
    satyaki>Regards.
    Satyaki De.

  • About PA-40

    Hello Experts,
    I want to know the difference of the following from T-Code PA40,
    A) Hire
    B) Hire Applicant
    C) Hiring - Addition
    D) Re-entry Into the Comapny
    E) Org Managment(Mini Master)
    Kindly explain the functionality of each Infotype & how it works
    I am working on Ecc 5.0?
    Plz let me know its urgent
    Dileep

    Hi anantha,
    If u dont mind to my email id also
    [email protected] or [email protected]
    regards,
    goutam

  • Short Dump while executing New Hire (action type) in PA40

    Hi All,
    i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
    Category               ABAP Programming Error                                                      
    Runtime Errors         SYNTAX_ERROR                                                                
    ABAP Program           /1PAPAXX/HDR_21000A                                                         
    Application Component  Not Assigned                                                                
    Date and Time          21.08.2014 14:07:03                                                         
    Short text                                                                                       
        Syntax error in program "/1PAPAXX/HDR_21000A ".                                              
    What happened?                                                                                   
        Error in the ABAP Application Program                                                        
        The current ABAP program "SAPFP50M" had to be terminated because it has                      
        come across a statement that unfortunately cannot be executed.                               
        The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in                     
        include "/1PAPAXX/HDR_21000AO01 " in                                                        
        line 52:                                                                                     
        ""LV_LENGTH" has already been declared"                                                      
        The include has been created and last changed by:                                            
        Created by: "HCM04 "                                                                         
        Last changed by: "HCM03 "                                                                    
        Error in the ABAP Application Program                                                        
        The current ABAP program "SAPFP50M" had to be terminated because it has                      
        come across a statement that unfortunately cannot be executed.                               
    What can you do?                                                                                 
        Please eliminate the error by performing a syntax check                                      
        (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".                        
        You can also perform the syntax check from the ABAP Editor.                                  
        If the problem persists, proceed as follows:                                                 
        Note down which actions and inputs caused the error.                                         
        To process the problem further, contact you SAP system                                       
        administrator.                                                                               
        Using Transaction ST22 for ABAP Dump Analysis, you can look                                  
        at and manage termination messages, and you can also                                         
        keep them for a long time.                                                                   
    Error analysis                                                                                   
        The following syntax error was found in the program /1PAPAXX/HDR_21000A :                    
        ""LV_LENGTH" has already been declared"                                                      
    How to correct the error                                                                         
        Probably the only way to eliminate the error is to correct the program.                      
        If you cannot solve the problem yourself and want to send an error                           
        notification to SAP, include the following information:                                      
        1. The description of the current problem (short dump)                                       
           To save the description, choose "System->List->Save->Local File                           
        (Unconverted)".                                                                              
        2. Corresponding system log                                                                  
           Display the system log by calling transaction SM21.                                       
           Restrict the time interval to 10 minutes before and five minutes                          
        after the short dump. Then choose "System->List->Save->Local File                            
        (Unconverted)".                                                                              
        3. If the problem occurs in a problem of your own or a modified SAP                          
        program: The source code of the program                                                      
           In the editor, choose "Utilities->More                                                    
        Utilities->Upload/Download->Download".                                                       
        4. Details about the conditions under which the error occurred or which                      
        actions and input led to the error.                                                          
    System environment                                                                               
        SAP Release..... 731                                                                         
        SAP Basis Level. 0007                                                                        
        Application server... "dc-ds-erp"                                                            
        Network address...... "172.16.23.111"                                                        
        Operating system..... "Linux"                                                                
        Release.............. "3.0.13-0.27-default"                                                  
        Hardware type........ "x86_64"                                                               
        Character length.... 16 Bits                                                                 
        Pointer length....... 64 Bits                                                                
        Work process number.. 1                                                                      
        Shortdump setting.... "full"                                                                 
        Database server... "dc-ds-erp"                                                               
        Database type..... "ORACLE"                                                                  
        Database name..... "ECD"                                                                     
        Database user ID.. "SAPSR3"                                                                  
        Terminal.......... "NLC-HP"                                                                  
        Char.set.... "C"                                                                             
        SAP kernel....... 720                                                                        
        created (date)... "Sep 14 2013 06:16:24"                                                     
        create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"                            
        Database version. "OCI_112, 11.2.0.3.0, V1, default"                                         
        Patch level. 500                                                                             
        Patch text.. " "                                                                             
        Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"              
        SAP database version. 720                                                                    
        Operating system..... "Linux 2.6, Linux 3"                                                   
        Memory consumption                                                                           
        Roll.... 0                                                                                   
        EM...... 37708200                                                                            
        Heap.... 0                                                                                   
        Page.... 106496                                                                              
        MM Used. 4666776                                                                             
        MM Free. 3709976                                                                             
    User and Transaction                                                                             
        Client.............. 210                                                                     
        User................ "HCM03"                                                                 
        Language key........ "E"                                                                     
        Transaction......... "PA40 "                                                                 
        Transaction ID...... "53EF470299AB5D67E1000000AC10176F"                                      
        EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"                                  
        EPP Connection ID....... 00000000000000000000000000000000                                    
        EPP Caller Counter...... 0                                                                   
        Program............. "SAPFP50M"                                                              
        Screen.............. "MP000000 1000"                                                         
        Screen Line......... 3                                                                       
        Debugger Active..... "none"                                                                  
    Information on where terminated                                                                  
        Termination occurred in the ABAP program "SAPFP50M" - in                                     
        "GET_HEADER_WITH_TCLAS".                                                                    
        The main program was "MP000000 ".                                                            
        In the source code you have the termination point in line 146                                
        of the (Include) program "FP50MDHD".                                                         
    Source Code Extract                                                                              
    Line
    SourceCde                                                                                  
      116
      CALL FUNCTION 'HR_HEADER_GET'                                                            
      117
          EXPORTING                                                                            
      118
               DHDID                    = FHD_HID                                              
      119
               BEGDA                    = BEGDA                                                
      120
               TCLAS                    = TCLAS                                                
      121
    * Es wird nur einer der folgenden 3 Parameter benutzt.                                     
      122
    * Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.                                 
      123
    * Der erste der nicht initial ist wird ausgewertet.                                        
      124
    *           MOLGA                   =                                                      
      125
               P0001                    = P0001                                                
      126
               PERNR                    = PSPAR-PERNR                                          
      127
          IMPORTING                                                                            
      128
               PROG                     = HEADER_PROG                                          
      129
               DNUM                     = HEADER_DYNNR                                         
      130
           EXCEPTIONS                                                                          
      131
                HEADER_DEACTIVATED          = 1                                                
      132
                HEADER_UNKNOWN              = 2                                                
      133
                HEADER_GENERATE_DEACTIVATED = 3                                                
      134
                HEADER_GENERATE_FAILED      = 4                                                
      135
                INTERNAL_ERROR              = 5                                                
      136
                OTHERS                      = 6.                                               
      137
      138
      IF NOT SY-SUBRC IS INITIAL.                                                              
      139
    * Bei Problemen gibt's eben ein leeres Dynpro.                                             
      140
        HEADER_PROG = 'SAPMP50A'.                                                              
      141
        HEADER_DYNNR = '0090'.                                                                 
      142
      ELSE.  " NOT sy-subrc IS INITIAL.                                   "                    
      143
    * Dann setzen wir jetzt auch noch das Datum fest.                                          
      144
        PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.                         
      145
    * Und schalten auf Uebergabe der PERNR mit globalen Variablen.                             
    >>>>>
        PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).                                       
      147
      ENDIF.  " (ELSE) NOT sy-subrc IS INITIAL.                           "                    
      148
    * Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.                         

    Hi,
    Error Log: Syntax error
    ""LV_LENGTH" has already been declared"
    please check LV_LENGTH variable declaration.
    It may be declared more once!

  • Runtime error while executing New Hire action in PA40

    Hi All,i am getting short dump while executing PA40 for new hire action typecan anyone look into this and guide as i am new to HCMNote: getting dump only for one user id for rest all other user id i am not getting dump.
    Category               ABAP Programming Error                                                      
    Runtime Errors         SYNTAX_ERROR                                                                
    ABAP Program           /1PAPAXX/HDR_21000A                                                         
    Application Component  Not Assigned                                                                
    Date and Time          21.08.2014 14:07:03                                                         
    Short text                                                                                       
        Syntax error in program "/1PAPAXX/HDR_21000A ".                                              
    What happened?                                                                                   
        Error in the ABAP Application Program                                                        
        The current ABAP program "SAPFP50M" had to be terminated because it has                      
        come across a statement that unfortunately cannot be executed.                               
        The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in                     
        include "/1PAPAXX/HDR_21000AO01 " in                                                        
        line 52:                                                                                     
        ""LV_LENGTH" has already been declared"                                                      
        The include has been created and last changed by:                                            
        Created by: "HCM04 "                                                                         
        Last changed by: "HCM03 "                                                                    
        Error in the ABAP Application Program                                                        
        The current ABAP program "SAPFP50M" had to be terminated because it has                      
        come across a statement that unfortunately cannot be executed.                               
    What can you do?                                                                                 
        Please eliminate the error by performing a syntax check                                      
        (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".                        
        You can also perform the syntax check from the ABAP Editor.                                  
        If the problem persists, proceed as follows:                                                 
        Note down which actions and inputs caused the error.                                         
        To process the problem further, contact you SAP system                                       
        administrator.                                                                               
        Using Transaction ST22 for ABAP Dump Analysis, you can look                                  
        at and manage termination messages, and you can also                                         
        keep them for a long time.                                                                   
    Error analysis                                                                                   
        The following syntax error was found in the program /1PAPAXX/HDR_21000A :                    
        ""LV_LENGTH" has already been declared"                                                      
    How to correct the error                                                                         
        Probably the only way to eliminate the error is to correct the program.                      
        If you cannot solve the problem yourself and want to send an error                           
        notification to SAP, include the following information:                                      
        1. The description of the current problem (short dump)                                       
           To save the description, choose "System->List->Save->Local File                           
        (Unconverted)".                                                                              
        2. Corresponding system log                                                                  
           Display the system log by calling transaction SM21.                                       
           Restrict the time interval to 10 minutes before and five minutes                          
        after the short dump. Then choose "System->List->Save->Local File                            
        (Unconverted)".                                                                              
        3. If the problem occurs in a problem of your own or a modified SAP                          
        program: The source code of the program                                                      
           In the editor, choose "Utilities->More                                                    
        Utilities->Upload/Download->Download".                                                       
        4. Details about the conditions under which the error occurred or which                      
        actions and input led to the error.                                                          
    System environment                                                                               
        SAP Release..... 731                                                                         
        SAP Basis Level. 0007                                                                        
        Application server... "dc-ds-erp"                                                            
        Network address...... "172.16.23.111"                                                        
        Operating system..... "Linux"                                                                
        Release.............. "3.0.13-0.27-default"                                                  
        Hardware type........ "x86_64"                                                               
        Character length.... 16 Bits                                                                 
        Pointer length....... 64 Bits                                                                
        Work process number.. 1                                                                      
        Shortdump setting.... "full"                                                                 
        Database server... "dc-ds-erp"                                                               
        Database type..... "ORACLE"                                                                  
        Database name..... "ECD"                                                                     
        Database user ID.. "SAPSR3"                                                                  
        Terminal.......... "NLC-HP"                                                                  
        Char.set.... "C"                                                                             
        SAP kernel....... 720                                                                        
        created (date)... "Sep 14 2013 06:16:24"                                                     
        create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"                            
        Database version. "OCI_112, 11.2.0.3.0, V1, default"                                         
        Patch level. 500                                                                             
        Patch text.. " "                                                                             
        Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"              
        SAP database version. 720                                                                    
        Operating system..... "Linux 2.6, Linux 3"                                                   
        Memory consumption                                                                           
        Roll.... 0                                                                                   
        EM...... 37708200                                                                            
        Heap.... 0                                                                                   
        Page.... 106496                                                                              
        MM Used. 4666776                                                                             
        MM Free. 3709976                                                                             
    User and Transaction                                                                             
        Client.............. 210                                                                     
        User................ "HCM03"                                                                 
        Language key........ "E"                                                                     
        Transaction......... "PA40 "                                                                 
        Transaction ID...... "53EF470299AB5D67E1000000AC10176F"                                      
        EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"                                  
        EPP Connection ID....... 00000000000000000000000000000000                                    
        EPP Caller Counter...... 0                                                                   
        Program............. "SAPFP50M"                                                              
        Screen.............. "MP000000 1000"                                                         
        Screen Line......... 3                                                                       
        Debugger Active..... "none"                                                                  
    Information on where terminated                                                                  
        Termination occurred in the ABAP program "SAPFP50M" - in                                     
        "GET_HEADER_WITH_TCLAS".                                                                    
        The main program was "MP000000 ".                                                            
        In the source code you have the termination point in line 146                                
        of the (Include) program "FP50MDHD".                                                         
    Source Code Extract                                                                              
    Line
    SourceCde                                                                                  
      116
      CALL FUNCTION 'HR_HEADER_GET'                                                            
      117
          EXPORTING                                                                            
      118
               DHDID                    = FHD_HID                                              
      119
               BEGDA                    = BEGDA                                                
      120
               TCLAS                    = TCLAS                                                
      121
    * Es wird nur einer der folgenden 3 Parameter benutzt.                                     
      122
    * Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.                                 
      123
    * Der erste der nicht initial ist wird ausgewertet.                                        
      124
    *           MOLGA                   =                                                      
      125
               P0001                    = P0001                                                
      126
               PERNR                    = PSPAR-PERNR                                          
      127
          IMPORTING                                                                            
      128
               PROG                     = HEADER_PROG                                          
      129
               DNUM                     = HEADER_DYNNR                                         
      130
           EXCEPTIONS                                                                          
      131
                HEADER_DEACTIVATED          = 1                                                
      132
                HEADER_UNKNOWN              = 2                                                
      133
                HEADER_GENERATE_DEACTIVATED = 3                                                
      134
                HEADER_GENERATE_FAILED      = 4                                                
      135
                INTERNAL_ERROR              = 5                                                
      136
                OTHERS                      = 6.                                               
      137
      138
      IF NOT SY-SUBRC IS INITIAL.                                                              
      139
    * Bei Problemen gibt's eben ein leeres Dynpro.                                             
      140
        HEADER_PROG = 'SAPMP50A'.                                                              
      141
        HEADER_DYNNR = '0090'.                                                                 
      142
      ELSE.  " NOT sy-subrc IS INITIAL.                                   "                    
      143
    * Dann setzen wir jetzt auch noch das Datum fest.                                          
      144
        PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.                         
      145
    * Und schalten auf Uebergabe der PERNR mit globalen Variablen.                             
    >>>>>
        PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).                                       
      147
      ENDIF.  " (ELSE) NOT sy-subrc IS INITIAL.                           "                    
      148
    * Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.                         
      149
    * Wird mit Einfuehrung des Headerobjekts obsolet.                                          
      150
      PERFORM REMEMBER_HEADER  "                             "XYVPH4K015649                    
      151
        USING HEADER_PROG HEADER_DYNNR 'S'.  "               "XYVPH4K015649                    
      152
    ENDFORM.                                                                                   
      153
      154
    *       FORM RE588I                                                   *                    
      155
      156
      157
      158
    *  -->  T588I_DHDID                                                   *                    
      159
    *  -->  T588I_MOLGA                                                   *                    
      160
    *  -->  T588I_TCLAS                         

    Implement SAP Note 1004280.. your issue if fixed
    If your issue is resolved request you to close the thread or else free feel to touch base
    BR
    Anil

  • New Hire Data Transfer from E-Rec to ECC via PA48

    Hi,
    We have requirement where we need to use the basic new hire data transfer from erec to ecc using PA48.
    Could someone help me by listing the step by step process that is required to configure in both EREC & ECC?
    I know there is pdf document available online but that refers mostly to XI which we are not planning to use.
    Please help.
    Regards,
    Vikram

    Hi,
    For integration between E-Rec and ECC, check [Link|http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm]
    This gives detailed information on synchronous and asynchronous data transfers between E-Rec and ECC.
    Hope it helps!
    Arpita

  • Help with HR Hire Transaction PA40

    When I start a HR WorkFlow to hire a Person With the transaction PA40. When I save the second Info-type, "Create Organizatinal Assignment", the system require a new login.
    Reading the code I viewed that the function HR_EVENT_CREATE.
    call function 'SWE_EVENT_CREATE' Row 496 Function trigger_event - HR_EVENT_CREATE
    call method l_event->raise. Row 126 SWE_EVENT_CREATE
    call method l_event_manager->raise_event( me ). Row 25 Raise IF_SWF_EVT_EVENT
    call method l_handler->process.  " Row 170 CL_SWF_EVT_EVENT_MANAGER-RAISE_EVENT
    call method l_strategy->process( me ).   " Row 24 CL_SWF_EVT_EVENT_HANDLER-Process
    Do you have any suggestion?
    thanks

    hi Duxton,
    Thanks for the respond, but the record i already have it, but the number is automatic design and i don't know how obtein it that is the problem??????? because the user doesn't have the id object, he/she only wanna know the id object that was created......

  • Unable to hire an employee in PA40

    Hi Friends,
    I was trying to hire an employee in PA40 and it says that the employee is still active.
    I run the standard report S_AHR_61015516 and took a position which is vacant, but still I am unable to hire him.
    Could someone pls let me know what might be the problem.
    BYe
    Naveen

    Naveen,
    Goto PA30 and give that employee number, if the IT 0000 exists for that employee number, then you can't hire with the same personnel number.
    You can assign 'n' number of persons to one positions.
    To maintain the vaccancy goto TC: PO01,plz check, enter the positon id and maintain the IT 1007 (Vacancy).
    While executing PA40 don't give any personnel number and in IT 0000 maintain all the field except Emp Number and press enter, if it is emp number is internal then the system will generate or you have to enter a new emp number according to the NUMKR feature.

  • In E-Rec once candidate is hired other recruiter should not hire the sameNA

    hi experts,
    In E-Recruitment eg if the candidate has applied against 2 job postings which is linked to requisition
    so basically if he is attached to 2 requisitions ,if he is hired against requisition 1 by recruiter 1,how can we prevent recruiter 2 in hiring the same candidate
    In short once candidate is hired we need to prevent other recruiters from hiring the same candidate.
    Regards
    RK

    Hi RK,
    Once a candidate is hired in to the system, the candidates data I.e Name, Pernr(incase of int.candidate), Org.unit, Position, Date of Hiring would no more be available in table T752F. Hence there is no question of another recruiter hiring the same candidate again.
    If your question is about the two different recruiters shortlisting an Applicant for two different positions, the answer would be ensure process discipline. Ex: The recruiter before proceeding further with shortlisting activities can see the overall activities created including correspondence sent to the candidate in the candidate data overview page and proceed further with appropriate action.
    Hope this answers your question.
    Thanks
    G Raj

Maybe you are looking for