E-Recruit rcf_create_user error messages

program RCF_CREATE_USER produces unclear errors such as
"A candidate already exists for the user".
What kind of link should be between an external
candidate and a user ?
Good answer will be a link to qualitative documentation
for this program.
Thanks
Zeev Gavish

Zeev,
The data model of E-recruiment is quite complex.Well,SAP provides the report RCF_CREATE_USER to create an E-rec. user.
If you try to assign same user name for more than one candidate(i.e. repeated assignment),then this error will be thrown.
For each <b>external candidate(NA)</b>,SAP creates <b>User(US).</b>
regards
Bharat
Note:Pls. reward points for the answer.

Similar Messages

Locked User Error Message for E-recruiting front end

I'm working on e-Recruiting and when a user tries to login to the front end but that user is locked the error message displayed is incorrect. It currently sends the message: (Client, name, or password is not correct; log on again.) instead of (The user is locked.). Any one have an idea of what might be the problem or where I would go to try and fix this?
Thanks in advance,
Stephanie

Hey Brooks,
There is one point where these stuff can be manipulated. Please check out in transaction SICF, go to the service and see the logon details.
The second thing which stikes to me is that there are several roles in E-recruiting. So for every role , you need a different profile. Please check if the profile matches the user in case.
Apart from these, there is an interface and the implementation called CL_HTTP_HANDLER takes the logon details, does the processing.
please let me know how far you go.
Best regards,
Bharat

E-Recruitment error message :Page cannot be displayed

Hi E u2013Recruitment Experts,
While testing the E rec BSP pages from SE80 I am getting the error message:
Page cannot be displayed.
What I have done is as follows:
Step 1:defined the context in table V77RCF_CONTEXT
Step 2:defined the element of container sequence in table V77RCF_CS_ITEMC by copyin the data from table V77RCF_CS_ITEM
Step3. defined the container sequence in table V77RCF_CS_SEQC and defined the element.
Step 4.defined link for start pages in table V77RCF_SP_LINKC while copying the data from table V77RCF_SP_LINK
Step 5.Define Start page groups in table V77RCF_SP_GROUPC while copying the enteries from V77RCF_SP_GROUP
Step 6;Defined Start pages in table V77RCF_SP_ASIDC while copying enteries from table V77RCF_SP_ASID
Step 8:I generated the url using the program RCF_GENERATE_URLS using Https protocol
Apart from above setting I have also made entries in the following customer tables:
T77RCF_SP_ID(C) - Startpages
T77RCF_SP_ID(C)T - Startpages texttable
T77RCF_SP_GROUP(C) - Startpage groups (the blocks with a number of links)
T77RCF_SP_GROUPT/GRPCT - Startpage groups texttable
T77RCF_SP_LINK(C) - Links
T77RCF_SP_LINK(C)T - Links texttable
T77RCF_SP_ASID(C) - assignment of groups to startpages
T77RCF_SP_ASGRP(C)
But still I am getting the error message that the page cannot be displayed
Can any body tell me where I have missed out
Thanks and best regards
Rajeev chhabra

Hi Naddy,
I could not find the error log in the given T code.Is there anything else where I should look at.
Cheers
Rajeev

Fiscal Year Change in MM failing with error message

Hi I am with a company that is using SAP R/3 ECC6 Modules SD MM FI CO with COPA (costing based) for reporting. Our fiscal year runs 1 August to 31 July. I am a FICO support analyst, currently also filling in for SDMM until we complete recruitment of a new person in that post.
In MM when trying to open the new period/close the old, we are getting the error message 'The specified year 2009 is not the current calendar year.' the detailed log says 'incorrect period in control record of CoCo. The current period (month/year is 112008)
I have:
1) Maintained our FYV in the IMG and it is set to year independent (tried making it year dependent but that didn't solve the problem)
2)Set the apppropriate periods with correct year shift and texts
3) Assigned the CoCode to the FYV
4) Checked that the proper variant for posting periods are set.
5) Set the Global parameters for the CoCode
Financial postings work fine and there seems to be no problem with the FYV there, and everything worked Ok last year (our first with SAP since Go Live).
I have searched the relevant sections in my SAP Press config manuals for FI and MM and done a search on Google but there must be something I am missing.
Can anyone suggest a solution, please.
Thanks in advance
David

Thanks anyway, Vijay, but OB52 is for changing Fiscal periods. That table is set correctly, the financial postings wouldn't be working if it wasn't.
I hadn't checked OMSY, Syed, thank you for that suggestion. There are no entries in any of the fields for Year or FYr. I am willing to make entries here to try it if there is a good reason but why would it have worked all through FY2008 without any entry in these fields but fail now in the new FY? The period change worked without problem for the past 12 months, isn't this the same as most SAP fields i.e. if you enter nothing then it is open for everything, in this case all years?
I am using MMPV to try to open the new period but it is there that I am getting the error messages.
Edited by: David Crossley on Aug 11, 2008 1:00 PM

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

Hi la recruiter,
There are a few types of files that Acrobat can't convert--and PDF files with security applied is one on them. I'm happy to cancel your subscription, if you decide that it's not going to work out for you. Please confirm that you'd like me to proceed with the cancelation, and I'll take care of it right away.
Best,
Sara

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

Error message when installing Photoshop CS2 in Windows 8

I just upgraded to a computer with Windows 8. I use Photoshop CS2. I am getting the error message below when starting photoshop after installation. I changed program folders, but that did not work. Please advise.
Error: an error has been detected and activation cannot continue. Please restart your computer and reinstall application.

http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

E-Recruit rcf_create_user error messages

Similar Messages

Maybe you are looking for