E-Recruiting 3. 0 Requisition Approval

Hi
The requisition approval worflow is not triggered. Does anyone have any guidelines in terms of triggering this workflow?
The worflow is activated and required config done.
Please assist.
Tx.

Hi Bongisa,
May be you can check up whether the Event and Workflow template Linkage is maintained using the transaction SWE2.
In case if it is not maintained, may be you can add the Triggering event in the Header data of the workflow template.
And also you can check if the Event is triggered using the Event Trace "SWEL"
You can switch on and off the Event Trace by using SWELS.
Hope this helps.
Regards,
Raj

Similar Messages

E-Recruitment - Issue in Requisition Approval, flow to Recruiter

Hi All,
Im using standard WF 45600028 for requisition approval.
The request when created by Manager is going for approval to his supervisor and Supervisor in turn is able to approve the request, but the its not reaching recruiter.
When i verified Requisition monitor of the MSS view, then i see the request in "Draft" mode instead of "Released".
I feel this is the reason why recruiter is unable to see the requisition coming from Workflow.
Can someone help me change the status?
Thank you.
Pranitha

Hey Thanks Siddharth,
Anyways, my problem is resolved. What i mean on Recruiter's involvement is recieving the approved form so that he can take it up further for posting.
In My case Recruiter's dash board or UWL , nowhere is the data populated. So i was of the opinion that the approved requests are by default saving in draft mode and hence not reaching recruiter.
Finally, i reallized that there is a small refresh link, at the bottom of the dash board. I need to click on the each of the links in the dashboard and "Refresh" from the link at the bottom, then only my approved requests are showing up, that too under "My Application Groups, My Open Requisiotns and All requisitions".
Silly me !! I have wasted so much of my time debugging Workflow and changing all the possible config setting.
But i really wonder why cant the data base be updated when we refresh with F5 instead click on each of the links in dashboard inorder to see what has he got in his box. This seems little weird to me.
Regards,
Pranitha

Initiating re-approval on price change durin purchase requisition approval

Hello everyone,
Must be a basic requirement for most people...can you please help us here?
We have a requisition approval hierarchy (defined in AME). We want the functionality that whenever an approver updates the price (through the "Open Document" in notification), the purchase requisition should be sent for re-approval starting with the requestor. Is there any profile option or workflow attribute which can be used for this purpose? I believe PO has some such option for setting the tolerance percentage, but don't know whether iprocurement has similar one.
Btw, we are using 11.5.10.2
thanks in advance,
abbas

Hi
For the the approval there is release strategy in purchase requistion ( with classifiaction .You can make use of this to put the approval .Now coming to ur Purchase requistion which are cretaed thru Mainatnace odere you need to cjheck the Field status for the document there you will the field valution price i just forgot the field status group.
you can try this way
regards
sunny

Enable attachement link in Purchase requisition approval WF

Dears ,
How to enable attachment link in purchase requisition approval wf ,??

hi
In the workflow, you need setup the agent assingment(i.e organizationlal roles)

PO Requisition Approval workFlow

Hello All
I am working on PO Requisition Approval work flow , when we crate a requisition one workflow is generated and my user want the workflow notification should be modified , like we have in the table few columns supplier ,itmes and wareshouse details , user want near supplier column , two another columns , so how should i do this , were should i change the code wether in the workflow or the standard package .
I am working on PO Requisition workflow , my problem is when Requisition is raised ...'PO Requisition Approval' work flow is generated and in that workflow we have details printed in the table , now i want to add few coulmns to the table . So i have modified the package PO_WF_REQ_NOTIFICATION.get_req_lines_details_link procedure , but the i am not able to see the affect in the work flow after comiling the package ...
can any one suggest me how to go head and cross check the changes .....
Thanks,
Sairam.

Hi Sairam,
I recently responded to a similar question, check out:
can we personalize e-mail notifications which calls OAfwrk
Regards,
Gareth
Blog: http://garethroberts.blogspot.com

Customization to Add Approver to Requisition Approver List

Hi
We use a Position Hierarchy to determine the Approver List for a PO Requisition Approval
However we also use Project Costing, and would like to dynamically add the Project Managers into the Approver List for Requisition lines coded to their Projects.
Does anyone have any experience doing this ? Know of any Open API calls that will allow this?
I have been through the Workflow and have designed the Process flow changes required, but cannot find any documentation on "dynamically" adding an additional approver into the Approver List.
Thanks

I have completed work on this and it will require use of the Applications Framework to add in the appropriate user. You will need to work with the Controller for the page as well as the AM for some validation.
In short you need to complete Applications Framework customisations to get this information.

How to hide REASSIGN Button for PO Requisition Approval Notification only

Hello,
I have a requirement in which I have to HIDE the REASSIGN button from the PO Requisition Approval Notification page. I realized that this page(NotifDetailsPG.xml) is being used by Sourcing Module too for sending the Approval Notifications. So I cannot directly set the Rendered Property to False for this as this would hide the REASSIGN button in Sourcing Approval Notification too.
So, how do I hide the REASSIGN button from the Notification page only if the Page is being used as PO Requisition Approval Notification? Can I use SPEL command in this case? Can somebody help me with this issue?
Thanks
Sunny
Edited by: user13369509 on May 16, 2011 7:39 AM

Hi Srini,
Thanks for the Immediate Response, I reviwed the Maetalink Note which you suggested, it was stated as:
Starting from ATG_PG.H.Rollup 4, an enhancement has been made to the Notification Details screen.
When the user viewing the notification has been granted the Workflow Administrator privilege (through the WF_ADMIN_ROLE preference), then the Reassign button will always be visible, even when the message attribute #HIDE_REASSIGN is set to Y.
This allows Administrators to reassign any notification when necessary in exception cases.
But in my case, the user do not have the Workflow Administrator privilege. He was not assigned with any workflow Admin Resps. Is there anything I am missing to check the WF_ADMIN_ROLE preference for a particular user?
Regards,
Sridhar

Requisition approver list

I am customizing PO Requisition Approval workflow and modifying the Approval List Routing Using AME process. I am adding a node which kicks off a plsql process to update some custom tables.
The purpose of this customization is to get who last approved (the previous approver) the requisition and who is the next approver. The workflow item attribute APPROVER_EMPID is helpflul to know who the current approver. But I also need who was the previous approver. Any easier way to get this info or any oracle table ?
I tried FORWARD_FROM_ID which always has the emp id of the person who submitted the requistion, not the last approver. Any suggestions to get this info ?
Thanks
SP

If the requisition is already approved once, then you can take the approver name from the following query by joining with hr_employees/per_people_f
select employee_id from po_action_history where object_type_code = 'REQUISITION' and action_code = 'APPROVE'

Vanilla PO or Requisition Approval

Hi,
11.5.9 E-Business PO, but not i-proc...
Is there any inbuilt functionality to facilitate PO or Requisition approval, along the lines of
A. creates orders / requisition
B. - Is 'sent' orders to approve
And yes, I know there is standard query the req / po back and approve, I just wanted to know if the standard PO Workflow, without customisation, carried this functionality.
thanks for your input,
Robert.

Your question is not clear.
UserA creates a PO.
Then he submits for approval.
UserB gets the notification to approve.
Is that what you are looking for?
This is seeded functionality. You will have to either use the position hierarchy or the employee-supervisor hierarchy.
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant

Is it possible to reassign a requisition approver?

Is it possible to reassign a requisition approver?
We have a service that contains two approval tasks. The first task is statically assigned to the service desk. The second task is fired when the service desk identifies the approver and completes the first task. However, we have found many cases where the identified approver is incorrect due to outdated data and would like to find a solution allowing the service desk to update the secondary approver and reissue the approval task. Does anyone have suggestions?

Thanks Ed. I'll open up a ticket for this enhancement. By the way, we have found that if a person is inactive in OSC and we then activate them, they do not show up when we search for them in ServiceManager to assign approvals to. We waited overnight in case it had to be refreshed, but still they do not show up. Any ideas on this?
I don't think it has to do with whether the approver is active or inactive because we put in a user that is set to inactive and it lists him when we do the search in S

IProcurement Purchase Requisitions Approval

Hi,
can anyone help me for finding who is the approval of the purchase requisition,
actually when i m clicking on the approve button after entering the fields values its going for approve but when i m checking it in iProcurement Requisition its showing "No approver found for Purchase Requisition 5645".
so plz anyone help me to solve this problem
Thanks in advanced

Have a look at the following Metalink notes:
- 297576.1 (Document Approval is Returned with a Notification Saying No approver Found for Purchase Requisition XX)
- 368640.1 (Requisition Approval Gets No Approver Found If Tax Makes The Total Require A Higher Level Approver)
- 316704.1 (No Approver Found For Requisitions Created After Clicking Clear Checkout Changes)

Requisition Approval Process in EHP4

HI,
In EHP4- E-recruiting, I have given one user the role of Restricted Recruiter. During the requisition creation process, this user should not be allowed to release the Requisition. But this user can release the requisition. It is not asking for the Approver. I hvae already activated the standard workflow for this
I am currently using the follwoing package- SAPK-60407INERECRUIT.
Thanks and Regards
Rosy

Hi Christine,
Where can I find out more about what the "workitem" is and where it should be "displayed" to the approver? I'm not sure of what "Interface" the Approver is supposed to Login to, in order to approve the requisition so as to set the requisition's status to "Released".
I'm using the Restricted Recruiter role that you describe, and I'm able to get the workflow to send an email to the designated approver. However, the default email doesn't mention anything about the "workitem" and the email does not provide a Link so that the approver can complete the Approval process.
We are using a distributed SAP E-Recruiting sytem and we do not use SAP Portal or MSS. In addition, we have only turned on and activated Business Function "HCM_ERC_CI_1".
Any help would be greatly appreciated.
Don

How to know through back end employee position in Requisition approval

Hi all,
I have one Employee_id ,how to know this employee has a authority to approve the requisition through back end. what is the link between
per_all_people_f and PO_POSITION_CONTROLS_all.
Thanks

hi
I have one small doubut, what is the differnce in the PO_Requisiiton_headers_all Table Have PREPARER_ID and PO_action_history table Have Empolyee_id and also in po_action_history have created by .what is the main differnce between thease three PREPARER_ID,empolyee_id and created_by .
Ex :- select created_by,last_updated_by,PREPARER_ID,creation_date,last_update_date
from apps.po_requisition_headers_all where requisition_header_id=6731548
O:P- created by last_updated_by prepaper_id creation_date last_update_date
1216 83867 72208 5/26/2009 8:48:59 AM 5/26/2009 12:41:19 PM
select created_by,last_updated_by,employee_id,action_code,creation_date,last_update_date
from apps.po_action_history where object_id=6731548 order by sequence_num
CREATED_BY, LAST_UPDATED_BY, EMPLOYEE_ID, ACTION_CODE, CREATION_DATE, LAST_UPDATE_DATE
1216, 1216, 72208, IMPORT, 5/26/2009 8:48:59 AM, 5/26/2009 8:49:27 AM
1216, 1216, 72208, SUBMIT, 5/26/2009 8:55:41 AM, 5/26/2009 8:55:41 AM
1216, 1216, 72208, RESERVE, 5/26/2009 8:55:41 AM, 5/26/2009 8:55:42 AM
1216, 1216, 72208, FORWARD, 5/26/2009 8:55:42 AM, 5/26/2009 8:55:43 AM
1216, 83867, 72208, APPROVE, 5/26/2009 8:55:43 AM, 5/26/2009 12:41:13 PM
My Mian Problem is why same employee forward him self to approve the requisiiton.
but his last updated_by is different.
I am not Understanding the functionality of this .
Thanks

Purchase Requisitions Approval Error

Hi,
We are working in Oracle Applications 11i. We have the follwoing modules installed and used: Purchasing, Inventory, HRMS(Payrol), General Ledger, Assets, Payables.
I am trying to fill in the gaps in our initial setup in order to enable the user to use Purchase Requistions documents.
Purchasing Super User wishes to create a Purchase requistion herself and get it approved and then distribute the approved requistions amongst the buyers. Is this possible??? How can we implement this? Can we assign the superuser to aan approval hierarchy of one level?
Also, I have created a multi-level position approval hierarchy , run Fill Employee Hierarchy, and assigned it to the Purchase Requisition document.
Me, in the 1st level have created a Purchase Requistion,I submitted for approval and then had the error:
APP-PO-14142: In Exception of Start_Wf_Process()-PO_REQAPPROVAL_INIT1.Start_WF_Process: In Exception handler: ORA-20002: 3108: Root Process could not be determined for item XXXXX. There may be a problem with item type selector function, or you may be required to supply a starting process Name.
Can someone advise please....
Thank you...

Hi again,
Now please help me in the first part of my post.
How can I setup Purchasing Requisition in one-level hierarchy and approval?
After the Reuisition is approved, in order to control the load balance , how can the super user distribute it to buyers to follow up the standard purchase order and submit it for approval?
Thank you

Newly Created Branches not showing up for Recruiter in the Requisition.

Hi,
We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
Thanks.

Hi,
the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
Kind regards
Roman

E-Recruiting 3. 0 Requisition Approval

Similar Messages

Maybe you are looking for