E-Recruiting 6.0: Name Field

Hi Experts,
I have the following questions as regards to 'name' field and would appreciate your help:
1) I understand the name fields (first name and last name) cannot be customised. But does E-Recruiting support the addition of middle name? I can configure under Business Partner to add in the Middle name, but it did not display on the E-Recruiting screen or R/3 BP transaction. I am not sure whether standard E-Recruiting does not support it or I have not configure correctly.
2) What is the table name which stores the name of a candidate and the applicant objecet number? I can see the name of the candidate in transaction BP, but i do not know where to find the applicant number. I need the information to for tracing and troubleshooting purposes.
Many thanks,
William

Hello William,
with e-recruiting 600 support package 10 or 11 e-recruiting supports middle name, 2nd academic title and name prefixes in the web dynpro frontend as standard fields for candidates. Unfortunately it seems SAP is no longer adding such stuff to the BSP frontend. In transaction BP you should be able to see these fields if noone changed BP. But the fields are only visible when filled so you might have to change to edit mode to click this small button with the plus.
Personal data of candidates name, birthdate, gender, titles are stored in the standard business partner tables BUT000 and following. Address is saved in the tables of the central address service but needs an entry in IT5110. That's why adding an address in BP won't work while changing is possible.
To get the differnt keys which are used for the candidate I usually start from BP as I have a name. I simply use the sear help of BP to get the BP number. Then it's all about HRP1001 which stores all object relations. As BP is an external object from HR view (as is the User) you put the BP into SCLAS and number into SOBID field (dont forget leading zeros here) and you can get the CP number. With the CP number you can get the User and the candidate (NA) number. From the candidate you can get applications (ND) and candidacies (NE) and so on.
Best Regards
Roman Weise

Similar Messages

Path and Name field in SPD 2010 Workflow for creating Doc Sets

Hi Guys,
Here's hoping you can help out and give a few pointers. I'm currently trying to implement what I thought was quite a simple workflow involving the creation of a Content Type (similar to Doc Set but with additional field) within an alternative library when
a new item is added to the current library.
Create Item in CaseFileLibrary (Output to Variable: CaseFile)
When running the workflow, I keep getting the following error:
"The workflow could not create the list item because the file name is either missing or invalid. "
It seems to be related to the 'File and Path' field within the 'Create New List Item' field mappings. For this I have tried the CurrentItem:Title as some other forums suggest and have also tried entering the URL path e.g. /subsite_name/library_name/CurrentItem:Title.
(as the name of the CaseFile (Doc Set) is going to be the same as the current item name)
If anyone has any suggestions, I would be truely greatful.
Luke

Hi Luke,
This error indicates there is an error in the workflow logic. Ensure that the file name entered in the Path and Name field is a valid file name. Common reasons for a file name to be invalid include a missing or incorrect file extension or a file/path string
that is too long and exceeds the allowable number of characters.
More information, please refer to :
Common error messages in SharePoint workflow development
For the URL that you used in the ‘Create New List Item’, whether the CurrentItem:Title is a lookup, not typed by yourself. If not, please type /subsite_name/library_name/, then lookup CurrentItem:Title, like the below, then save and publish the workflow,
compare the result.
In addition, please use another name for the name, compare the result.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

File Path and Name field does not display correct path

We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

How to read the "Name" field from document library in workflow?

Hi,
The task I'm trying to accomplish looks pertty simple: I need to read a value of the item's "Name" field inside the workflow. I try to do it using LookupSPListItem and GetDynamicValueProperties activities. I can get value of the "Title"
field, also I created custom field and can read it too.
But the "Name" field always comes empty.
I guess I need to use some tricky syntax or this field has some different "internal name"?
The workflow is designed in VS 2013.

Thank you. Looks correct, since when I enter this path (FileLeafRef) into GetDynamicValueProperties
and change Entity Type to list of documents it changes to Name
automatically.
But somehow it doesn't work too. (:
I also tried LinkFilenameNoMenu and LinkFilename
- same result.
EDIT: Solved. :)
Looks like FileLeafRef is not loaded by default by LookupSPListItem, so you have to pass this property name via
Properties collection. The bad news is that in this case other properties won't be loaded if you didn't add them to this collection.
Anyway, it works. :)

How do I get a new value for the service name field and update it in Connection Properties?

I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks

Replication of bp name field from ERP to CRM

Hi experts,
We have a problem in ERP to CRM master data replication.
We have already connected our ERP (ECC 5.0) system to CRM 7.0.
We have made initial master business partners (bp) data load from ERP to CRM without problems.
All bp fields, including NAME (but000-name_org1) are transfered correct from ERP (KNA1-NAME1) to CRM.
We have a z program in ERP that is used by users to change the customers names (KNA1-name1).
When we use our custom program in ERP to change the kna1-name1 field in ERP, the bp name field is not changes in CRM.
Using XD02 or FD02 in ERP to change the name (kna1-name1) field in ERP the replication of this field to CRM is correct.
KNA1 table is updated correctly in ERP using our custom program .
What does transactions XD02 and FD02 has that make name filed replicated in CRM?
Thanks in advanced.

Hi,
First variant:
You have to retry load business partners by request:
Tcode R3AR4, R3AR2, R3AR3
So, system retrive new data from tables and transfer to CRM.
Second variant:
You have to add to your z-program part, there you fill data in the CRM system also (via RFC).
Denis.

Changing Mail, contacts, calendars name field

hello probable something simple but how do i permanently change the Name Field in the "Mail, contacts, calendars" setup.
I press details to enter my own but each time i do the name field is over-written with a previous owner or user of the mac.
Until this is complete i cannot sync contacts and calendars as i want to, using OS X Mountain LIon.

Go to System Preferences > iCloud
Sign out of the current Apple ID
Sign in with your ID.
System Preferences > Users & Groups
Change name for current User.
However, I HIGHLY suggest that you create a new User and move all your data to the new User or do an erase and install.
1) Move to a new User. See directions here:
Move your data to a new User or a new Mavericks partition**
2) Backup your data to an external drive using clone software. While booted from the clone erase the internal drive and reinstall OS X.
**(Fair disclosure: NeedHelp4Mac is my site. I may receive some form of compensation, financial or otherwise, from my recommendation or link.)
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
You will need an external drive to create the clone unless your internal drive is large enough to create a second partition large enough to hold all your data.

File name field not generating dynamic file name for report printing

Hello Folks,
I have a report region on a page and have enabled report printing. I would like to have the file name generated dynamically. So, I add the substitution string, say "&P1_CUSTOMER_NAME." (no quotes). The output file I get is literally named "&P1_CUSTOMER_NAME..pdf" (no quotes).
I have seen several posts suggesting the file name field should accept this syntax but, I cannot get it to work.
We are running Application Express 3.2.0.00.27 and BI Publisher.
Any suggestions?
Thanks for your help.
-Markus B.

I was finally able to make it work using a page process and the APEX_UTIL.DOWNLOAD_PRINT_DOCUMENT with a submit button.
-Markus B.

Resource name field for target oracle table

Hi,
I want to build a generic interface that takes data from different similar structured flat files and loads to different target table (similar structure).
I thought I will use the resource name field for both source and target and use variables to determine the source and target names during runtime.
the problem is it runs fine at the source when i change the file names to load from but it fails at the target when i use variable to determine the target name.
Did anyone try this earlier? if yes, can you please help? The error I got was 911 : 42000 : java.sql.SQLSyntaxErrorException: ORA-00911: invalid character
and the query generated was
insert into      SCHEMANAME.#PROJREP."v_generic_interface_target_name"
     COL1,
     COL2,
     COl3
select
     C1_COL1,
     C2_COL2,
     C3_COL3
from     STGSCHEMA.C$_0DEMO1
where     (1=1)
Edited by: sriksd on May 7, 2010 6:51 PM

Hi,
Which KM you are using ?
Try to use #PROJREP.v_generic_interface_target_name into Resource name of the table in the data models.
Regards

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Is it possible to view ".mp3" files in Mavericks "Tags" windows by file name (rather than the info in the "name" field of it's ID3 tag)?

Short version:
When viewing ".mp3" files in a "Tags" window, the information in the "name" column next to the file defaults to the information in the "song" field in the file's ID3 tag.
Is it possible to change have the "name" column display the actual FILE NAME instead?
I did some research and found nothing.
Long version
Let's say I have a ".mp3" file named "Todd Rundgren - Hello It's Me.mp3"
When I open the folder this ".mp3" is in and find the file, the "name" column will read "Todd Rundgren - Hello It's Me.mp3" (of course)
Now, I tag the file "jams"
Now I go to my "jams" tag view everything tagged "jams", the "name" column in that window DOES NOT say
"Todd Rundgren - Hello It's Me.mp3" , but instead just "Hello It's Me"
The finder seems to be pulling this information from the "name" field of the ".mp3" ID3 tag metadata (aka, the information that would be written in the "name" column when viewing the file in iTunes.)
Ok, that's fine Mavericks, but I want to see the ACTUAL FILE NAME of my ".mp3", (which "tags" windows seems to do for most other things [documents, folders])
Q: Is it possible to display the filename of a ".mp3" file when viewing a "tag window?"
Tags are super useful, but this inconsistency makes it inefficient, distracting, and confusing to move freely between the window for a given "tag", and a normal "finder" window.
Any help would be greatly appreciated, thanks!

You are not alone…
https://discussions.apple.com/message/24065588
https://discussions.apple.com/thread/5762545
I think you have to avoid editing inside the tags list with the 'metadata names'. Instead right click an item, select 'Open enclosing folder'.
In 'real folders' you can enable the 'Title' in column via the 'Veiw Menu > show columns', that way you can see the file name & ID3/ EXIF titles.
'Fake folders' (smart searches & the recent tags list) don't feel finished yet IMO.

LabVIEW 2011 file selection fails to fill in the file name into the "File name:" field

In LV2011 I am selecting a text file while my code is running. The "file name:" field is not populated with the selected file name.
This is inconvenient, especially if I want to modify a file name by one or some few characters.
How do i make LV 2011 behave like the previous versions?
Scientia est potentia!
Attachments:
File name is not filled in.PNG ‏72 KB

Thank you fot your reply it causd me to find the problem.
I figured it out while I was trying to extract the applicable section of my code to send it to you.
I had an asterisc wired to the "default name" input of the "File dialog" VI.
Now I am not wiring anything to the "default name" input of the "File dialog" VI and it works just fine.
I am sorry for your lost time.
Scientia est potentia!
Attachments:
Corrected code.PNG ‏10 KB

How Does The Browser Know The "File Name" field in the "Save As" dialog

Hi!
I have a servlet called co.com.SomeStaff who reads a binary file from the server an sends it to the breowser.
The Browser opens the "Save As" Dialog whith the value "co.com.SomeStaff" in the File name field, but and I need the name "SomeBinariFile.exe" instead.
How can I change that value?
Thanks All.

Use <%
response.setHeader("Content-Disposition", "attachment; filename=filename.2save");
%>

Predefault "User Name" field with Login Name

Hi,
Predefault in "LS Medical User Verification" BC does not work. I tried to do the following but all did not work:
* Put a predefault value in the "User Name" field, System: Creator
* Create a calc field "SCR Login", calc value: LoginName (). Set predefault of "User Name" field, Field: 'SCR Login"
* Expose "SCR Login" in the applet. Field is blank in UI.
We are using the vanilla "LS Medical User Verification Applet" for user verification and we want to predefault the User Name field with the current user logged in. How can I achieve this?
Thanks,
Jasmin

Hi,
I believe Predefault/Postdefault will only work with NewRecord even and since the User Verification Popup Applet does not go to that event on load that is why it does not work.
Since the client wanted to default the user name with the current user logged in, we just removed the User name field from the popup applet and pass the TheApplication().LoginName() to the Authentication Business Service.
Thanks,
Jasmin

JQuery to set Title field to Name field in Document Library

I want to use some simple JQuery to populate the Title field of a document with the contents of the Name field. I am able to populate the Title field with basic text using:
<script type="text/javascript">
$(function() {
$('input[title=Title]').attr({value: 'Test'});
</script>
That works fine - but how can I change it to pass the contents of the Name field into the Title field? This code runs on the EditForm.aspx for the document library. Thanks!

Are you editing the webpart in visual studio and designing custom webpart?

E-Recruiting 6.0: Name Field

Similar Messages

Maybe you are looking for