E-Recruiting and New OFCCP Internet Applicant Rules (US)

Hello,
On February 6, the Office of Federal Contract Compliance Programs' (OFCCP) criteria for Internet Applicants went into effect in US.
Is SAP E-Recruiting ready for this? How could this be implemented?
Kind Regards
Koen Van Loocke

Hi all,
please check with SAP-Note 929247 (Recordkeeping and Reporting) and the related notes...
968524 OFCCP: Selection criteria improved
945941 OFCCP: Message texts and exception handling
Best Regards, Michael

Similar Messages

I don't have a question so much as a comment for APPLE. I am a new iPhone 5s user and it has many things I like but It is too small and I can only talk on the phone and use the internet if i am in a position to use a wifi connection and that is not good

I am a new iPhone 5s user. I like many of the features it offers. I don't like that I cannot talk and use the internet (if I am away from WI-FI) and this phone is too small. I am actually thinking of returning it and going back to an Android. After all the hassle it took to get all my stuff working on this phone , it may be worth the switch. This phone needs to be able to multitask freely in this day and age. Also Safari is not the best search engine but I could work with it if I could talk and use it at the same time. I use my phone for business and this is a feature that is needed in my line of work.

TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck.

How do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance

Trying to download update to CoPilot Live and CoPilot GPS with maps. files sizes are large and taking hours to download on wireless connection. How can I download App updates and new maps while connected to PC and Itunes through hard wire internet link?

Trying to download update to CoPilot Live and CoPilot GPS with maps. Files sizes are large and taking hours to download on wireless connection. How can I download updates and new maps while connected to PC and Itunes through hard wire internet link?

I'm on my iPad, so I don't know if this is the page with an actual download. I don't see a button, but assume that is because I am on an iPad. It is in the DL section of Apple downloads.
http://support.apple.com/kb/DL1708

Unexpected shutdowns and loss of internet connectivity on brand new 420t

Hi,
I was experiencing unexpected shutdowns (would see safe mode choices when turned PC back on) and also intermittent internet connectivity issues.
To Fix:
In device manager, I turned off the option in the Realtek Network Controller Power management tab to allow the computer to turn off this device to save power.
It's been working like a charm so far (2 days). I'm not so sure HP should be building PCs with this option set. There are no updates that I haven't installed either. PC still sleeps (can see nic lights go off) and wakes up just fine.
Other that that we really like this PC...Beats Audio wasn't impressive with only the internal speakers, then I tried a good set of external tweeters and a subwoofer and then it was realized.
Hope this helps someone.

Troy,
Thanks for the suggestion. It sounds like you've heard that others have had this problem. Is that right?
And are you suggesting that the kernel panics and the loss of Internet connection are related? They often happen independently of one another.
Claire

Help with loggin in and out of internet please

I have the 9360 and use the internet and have set up my email account fine but for one annoying issue:
The problem I have is that each and every time I move away from my home wifi, the device needs me to log into BTFon to use the internet away from home.
At my parents' house they have wifi and I have put in their network key many times, yet the blcakberry doesnt even look for it it simply asks me to log into ruddy BTFon!!!
When I am out and about, instead of it using Vodafone, it forces me to find a BT Hotspot and its' driving me MAD!!!!!!!
When I return home, I actually have to tell it to use my wifi as it still thinks I am logged into BTFon.
I know its' my dull brain but can someone please point out which obvious things I've failed to do!?
Thanks in advance

Does the iOS device connect OK to other networks? If so that indicates a problem with your netwok
Do other devices now connect OK?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

E-Recruitment Installation - new client required??

Hi Experts,
We are implementing E-REC and I am not sure if we should install it with a different client than the one we use for HR. How do you decide? Does it need to be a different client?
If so, do you need to maintain user ids and authorizations in both clients?
How does the Portal know what client to reference when pulling data?
Thanks for any help!
Shane

Hello Shane,
i have to admit that i never thought /heared of that option. Usually you decide between installing on the HR server (same client) or you install on a seperate server. For the first option there is a synchronization on the server for making employees to internal candidates for the 2nd you use ALE data distribution.
The decision is usually based on the data-/systemsecurity policies. An e-recruiting system as connected to the internet. This is often a no go for a combined installation. Installing in another client does not really improve the situation.
In e-recruiting 300 you had the 2 options keep the hr system behind all firewalls and install e-recruiting on a server in the dmz of the firewalls or break down some firewalls for the combined installation. That's why nearly all 300 installations i ever had to do with are e-recruiting standalone installations.
For 600 when using Webdynpro there is a new option you can relay the outside e-recruiting access over a special server via a trusted rfc to the server with hr + e-recruiting behind all firewalls for better data security. Some customers even use this constellation for an e-recruiting standalone instalations although i am not really convinced of this idea.
So in most cases the system landscape is decided by infrastructure and data security / data policy experts. The harder your company policies and the data security laws in you country are the more likely they will request the standalone version.
If the experts mentioned above give their ok for combined installation your start analysing you user structure (who has users for the hr system, will hr tollerate everyone getting a user on their holy cow?) and of course your authorization structure (if you use e.g. managers destop with structural authorizations for manager reoporting you will definately get a challenging project with a combined intallation) and your data structure if you use interal hiring you will need (in standard oriented implementaions g) an employee dataset. if you have subsidaries which have to be integrated in the e-recruiting but not using the same hr core system using a combined installation is in my opinion much more tricky.
When you checked all these points, discussed with network infrastructure guys, the data security policy guys and the hr system owner you make your decision. Both solutions have their advatages and also their challanges but the stand alone installations have in my expirience the majority.
I admit sometimes it works much easier. You go to the HR guys and say "hey we install e-recruiting and plug your system with all organisation, comp. benefit and payroll data to the internet" - 30 seconds later they decide for the standalone version.
Hope that helps you at least for setting up your decision process.
best regards
Roman Weise

IChat And New D-Link Router Problems

Folks,
I really need a helping hand with iChat. I've posted some problems here before which you were kind enough to help me out with but I am at wits end tonight. I just bought a new D-Link EBR-2310 Wired Router (Hardware Version B1 and Firmware Version 2.01 - the very latest version). I'm completely up to date on my iMac running Mac OS X 10.5.7 with every software update known to June 11th, 2009 including QuickTime 7.6.2. I have QuickTime Streaming set to 1.5Mbps T1/Intranet LAN and iChat Bandwidth Limit set to 500 kbps.
I use an AIM account which uses port 5190. With my old D-Link Router (DI-604), I had to set up an Advanced Virtual Server for UDP Port 5190 and I also had to disable the "Discard Ping From WAN side" function (which seems to almost defeat the purpose of the security of the router in some ways but I didn't have much choice). Making these changes seemed to fix all the iChat "communications error" problems I was having with the older router. Things seemed to work fine after making these changes mind you, this was under Mac OS X 10.5.6 and I'm now running Mac OS X 10.5.7.
In this new D-Link EBR-2310 Router, I've done much the same thing. In the Advanced Section of the new router under Application Rules, I've set up a new "application name" called iChat and configured Trigger Port 5190 UDP and Firewall Port 5190 UDP - set to "always" but should I have both UDP and TCP enabled or just UDP? I've also enabled "WAN Ping Respond" (again, this seems to defeat some of the security of the router but no choice other than to do this).
I'm getting iChat "communications errors" and just a generally poor connection with whomever I chat with. On their end, my voice will drop out at times and my image will sometimes have a little static in it. It happens with all users on their end (some are AIM users, some are dotmac/mobile me users). After a few minutes of being able to chat, the picture will freeze and a communication error pops up. We have to quit out of our connection and log back in and then it will work again for a while until the same problem occurs.
I called D-Link and they were of no help when it came to using Macs with iChat (iChat isn't even listed as one of the applications in any of the router preferences). They suggested changing the MTU from 1500 down to 1492 but my old D-Link worked fine at 1500. They also suggested disabling "SPI" in the router firewall settings. I haven't done any of this yet as they didn't know much about Macs.
Do I need to disable "SPI" in the router firewall settings? Do I need to configure both UDP and TCP ports 5190 in Application Rules? Do I need to set up some sort of Port Forwarding on this new router? Is there some other configuration I need to set up in this new router? I'm just lost. Darned near ready to do away with the router completely but we have three Macs on our network so we need the router in order for all of us to be able to access the Internet.
Any help would be greatly appreciated.
Thanks,
Gerard

Hi,
Both are correct.
iChat 3 uses 20 ports as a Range for the A/V chats as it uses 4 ports on a Vid in Vid Out, Audio In Audio Out basis where as iChat 4 sends and gets everything on one port.
The iChat 4 Article http://support.apple.com/kb/HT2282 does not mention the Bonjour or Jabber Ports which are still needed (in the router and/or Modem)
What the Second Article does not list is the iChat Screen Sharing port.
For this using UPnP if the device has it is better.
UPnP (Universal Plug and Play) allows the app to sate when and what ports are open for it (they close after a period of Non use that can be adjusted in some modem/routers).
You need this as the Screen Sharing ports is random.
The Port Forward site shows two versions
Version 1
Version 2
with slight differences in how the boxes can be filled in.
Neither set of pics gives clues as to whether UPnP is on there.
Yes I would disable SPI (And/Or DoS)
SPI (Stateful Packet Inspection) tries to examine the data coming to your modem and judge if it is Ok to pass on.
There is so much iChat Video data in some chats that it can not keep up and closes the port.
DoS (Denial Of Service) measures the rate of data and when it reaches a threshold it cuts the port presuming it to be an attack. Of course most devices that have it have un-adjustable settings that do not reflect modern Internet Speeds.
EDIT
This Emulator says UPnP is in Advanced Network along with Enable WAN Ping Respond (Although you do not have a time limit adjustment)
9:57 PM Friday; June 12, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

Difference between classic Recruitment and E-Recruitment

Hi experts.
In our company we want to implement recruitment processes of SAP. But I want exactly know what is the difference between Recruitment and E-recruitment.
to implement recruitment with new web interface or to implement E-recruitment ? Please to provide reason why first one or other one. I'd like to know detailed difference . Every helpful answer will be regarded.
Regards
Garayev

As far as I know for recruitment you need to open vacant position to be able to run the process, but in E-Recruitment you do not need to create vacant position. You can run E-Recruitment with or without position.
Also E-Recruitment can be linked with ipad or other tablet pc's such as managers or hr recruiters can take notes during the interview and notes in the interviews can directly be recorded in E-Recruitment.
With E-Recruitment it is much easier to collect data of applicants who are not working in the company.
Regards;
Okan

New FIos Internet user

Hoping someone can help a new FIOS internet user that's not much of a tech person. I have a new Verizon FIOS connection at home and an ActionTec wireless router connected to a box on the wall by coax cable. No problem with the wireless connection to my two family laptops, nice strong signal all through the house.
I want to connect two powered switches by ethernet cable to the ports on the router. One to connect my DirectTV box and bluray player so they have internet connections, and one in my basement to run a desktop PC that doesn't have a wireless card in it. Are there any problems with this? Does Verizon allow me to have two separate switches connected to the router which then power multiple items? Thanks!
Solved!
Go to Solution.

You should have no problem connecting a switch to each of two ports on the Actiontec, and then feeding multiple devices from those switches. I'm doing that myself.
However, I don't understand why you need a switch in the circuit between the router and the desktop PC in the basement. If there's only going to be one device connected in the basement a direct run of Cat 5e or Cat 6 cable from an Actiontec port to the basement PC should do the trick.

New home and new WIFI sluggishness

I recently moved in with my girlfriend. At my last location, I quit using wifi, was connected directly via ethernet to my cable internet modem. I was also Airport sharing the connection for my kids' iMac.
Now in her new place (and new wifi), I can connect with full bars via Airport, but many sites do not load the first time. I need to refresh the browser several times to get many sites to load.
I have turned off the internet connection sharing as well. Is it some type of DNS problem?
clueless... assuming it has something to do with the move.

HI greengrass,
There is no real procedure for you as a customer. You can place an order for broadband and phoneline simultaneously. BT will take care of the rest.
If there a line in the new place then it might need an engineer call out in order to get it up and going but this will be made clear whenever your order is placed.
TX
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Setting up Air play with new time capsule and newer airport express?

I just recently purchased a new time capsule, and I'd like to use my current generation airport express to stream music from my apple devices. I just was wondering what I had to do in airport utility to set this up? I was also wondering how to transition the network over from the old express to the new time capsule as far software settings go. I really appreciate the help and assistance. Thanks folks. I'm really looking forward to setting up the network for our new iMac.

Your setup is very easy..
This is how I would do it.
Remove the express from the network.. ie just unplug it but do not change anything in it. Keep the configuration as is until the TC is working.
Power off the cable modem.. this is requirement.. at least 20min is usually needed, dependining on your ISP.
Go into the airport utility and setup the TC as router for your network .. it is a simple setup.. but I would do as stated.. all short names, no spaces pure alphanumeric rather than accept Apple's names. That is for TC and wireless.
After 20min power up the cable modem. Once it is running and you have internet access. you can proceed to setup the express to do the airplay. If the internet still doesn't work, power off the cable modem overnight..
Do not lose that express setup so if you absolutely have to, you can at any time substitute it back and have internet again.
So everything is working properly TC in place as full router.. now hard reset the express.. and simply use the airport utility to put it in extend wireless .. or plug in by ethernet if you are going to hard wire it.
The extend wireless setup is all done straight from the existing setup.
Now you can plug your express audio port into your speaker.. and setup the airplay via the itunes.
I will get Bob to give you his way of doing it.. There is no one RIGHT way .. but he can give you more info if you want a particular method.

Firefox freezes when I try to open my emails and use the internet, what can I do?

Use Mozilla Firefox to see my emails and use the internet from about one week when I try to see my emails or use the internet it takes me to another wed site or gets freezes I am worry about because I don't know what's going up. This is the first time it happening to me. It says Firefox can not work properly it will close and I can lose some information, or click to star a new session but it never starts again it got freeze and I have to shut down the computer.

Use internet explorer as your default until this issue is resolved. Under Firefox, hotmail live will not load my email folders. No problem using internet explorer.

A new iPad and new Express, but no Mac - can't set up network!

Here's a puzzler (for me at least) --
Mom bought a new iPad and new Airport Express. She has no Mac, so no iTunes and no syncing. Her iPad does NOT have Airport Utility. She's starting from scratch.
Her Express is connected to her Cox Cable Cisco modem, shich shows steady green for good internet connection. The express flashes amber, I assume becuase there's no network set up.
Her iPad sees the Express -- Wi-Fi in the Settings menu has "Apple ..." where the network name appears -- and the wireless signal 'fan' shows strong in the top bar.
In iPad > Settings > Wi-Fi, Wi-Fi shows 'on', no editable network shows, and no "create network" option shows.
She can't get Airport Utility without internet or syncing to a Mac, and she can't see any way to create a network, or see any existing network that she can forget or manage.
Is this simple Cox Cable > Cisco modem > Express wireless > iPad a workable setup?
Is there any way to create the wireless network without Airport Utility?
Thanks!
Otto
P.S. The iPad isn't pristine connection-wise. It was temporarily connected to a public Wi-Fi to complete setting up an iCloud account, and so get to the home screen for the first time. BUT, my mom is ancient and fearful, and I don't want to send her out to find public Wi-Fi to set up a a credit card account so she can use the app store to get utility if I don't have to. Help.

Thanks CRMDVM -- ...which means, I think, that she will need to go out into the wide world to find public wireless. Makes me wish Airport Utility was one of the stock apps that came with the iPad.
Any other ideas? Any way to manually configure on an iPad? Anything? Thanks.
Otto

E-Recruitment and EHS - tables are missing ECC 6.0

Hello All,
We have recently noticed that we have tables missing in our SAP HCM and our EHS(Employe Health and Safety) Development Box. I am attaching the list of tables for review by all. Can someone tell me, please, if they know what these tables are for and if they are part of a note or submodule running off main modules for E-Recruitment and EHS. I checked notes in OSS but cannot find the tables for the EHS or E-RC modules.
We cannot find these tables listed anywhere. We are using ECC 6.0 and the BB installlment was for N. America.
<b>EH&S Tables</b>
CCRCC_CHCK_ON - EHS: Online Checks for Regulation/Scenario/Scenario Category
CCRCC_DET - EHS: Data Determination Modules per Regulation/Scenario
CCRCC_DETDOCTYPE - EHS: Modules for Regulation/Scenario/Scenario Category
CCRCC_EXCHG - EHS: Data Transfer from and to EH&S
CCRCC_FILTER - EHS: Data Filtering
CCRCC_LIMITG - EHS: General Quantity Restriction
CCRCC_LIMITS - EHS: Relative Quantity Restriction
CCRCC_MON - EHS: Monitoring Settings
CCRCC_PERIOD - EHS: Period Definition
CCRCC_SCENTYPE - EHS: Scenario-to-Scenario-Category Assignment
<b>ERECRUIT - PA-ER - E-Recruiting</b>
T77RCF_INCL2FORM - Assignment of Text Element to Smart Form Template
T77RCF_WL - Worklist
T77RCF_WLA_IDXGR - Index Group for Worklists
T77RCF_WL_ACT_P - Action Profile of Worklists
T77RCF_WL_OUT_P - Output Profile
T77RCF_WL_SEL_P - Selection Profile for Worklists
T77RCF_WL_SEL_PV - Values for Selection Profiles in Worklists
Points awarded!!

Hello Brenda,
I cannot speak for the EHS stuff but the tables you mentioned for E-Recruiting are part of the functional enhancements for e-recruiting 600 delivered with e-recruiting servie pack 7.
E-recruiting delivered 2 service packs which implmented new functioons. These were the e-recruiting packs 5 and 7. Futere enhancements will be delivered with the standard EhP (enhancement package) szenario - first of them is EhP3 for e-recruiting awaylable today if i remémber the schedules correctly..
You are probably missing these tables as you do not have installed the packages yet - so check your sp level. I strongly recommend you to upgrade to the newest service pack 11 for e-recruiting especially if you use / plan to use the webdynpro candidate frontend. But also for other implementation szenarios the sps are very urgent.
For the table in detail:
T77RCF_INCL2FORM - is a tablke for the new letter / correspondence change functionality using a dedicated changable text area in the smartform whixh has the advantage towards the old solution that changed correspondence can be printed propperly.
All other tables are part of the so called dashboard functionality.
You can find additional information on these functional enhancements in the software download centered of the sapnet under "Installations and Upgrades" -> "SAP Application Components" -> "SAP ERP" -> "SAP ERP 2005" -> "Documentation".
Best Regards
Roman Weise

E-Recruiting and New OFCCP Internet Applicant Rules (US)

Similar Messages

Maybe you are looking for