E-Recruiting: BSP Default Values

Hi,
is it possible to use default values (without modifications on the E-Recruiting BSP applications) in E-Recruiting 600?
Thanks and regards
Gabriel

Hi,
the answer is easy - no, it is not possible.
The only available function in this direction is the reference code generation for posting instances which is already implemented. Furthermore a Badi for setting some requisition and posting data is announced for EHP3 - but as i haven't seen it so far i cannot say if it is useful.
Rgds.
Roman

Similar Messages

BEx Variable default value does not pass thru to Webi report

Hi,
It appears that the integration between BEx and BOBJ Webi does not support default values when the webi report is scheduled. This means that if Webi/Infoview is the delivery method, than clients require 2 reports. 1 for adhoc and 1 for scheduling. Is there another way around this so 2 reports are not required? See SAP Knowledge Base Article https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136363534393826
Regards,
Dae Jin

Hi,
Yes it is not supported. you can achieve by writing customer exit for this.
in istep 2,
check whether the variable value is intial.
if intial
pass default value
if not intial (else)
dont do any change, just pass the user input to restriction.
-Sriram

USOBT_C almost empty after changing default values with SU24

After the implementation of OSS Notes 0001378328, 0001382895 and 0001404093 I performed a change in SU24 on the default values of authorization object (2nd tab) S_ALV_LAYO for all transactions involved.
I filtered all transactions with default value u2018Yesu2019 for this object and selected all these entries and changed them to u2018Nou2019.
When creating new roles afterwards I noticed that no objects were pulled in in PFCG and when checking table USOBT_C I noticed that, apart from the 328 records I changed to No for S_ALV_LAYO the whole table was empty! In the development client there are now just 328 records in this table whereas in de acceptance client there are 233,124 entries!
Could you please find out the following:
- How could this happen?
- What can I do to restore table USOBT_C?
I reported this bug also on OSS but maybe someone of you has had the same experience and can share the causes and solutions.
Thank you!
Lodewijk Borsboom

> > To read such a huge text in the above suggested notes may become tiresome of not ofcourse worthless.
> What is the use of posting a list of links or randon OSS note hits, when you are not sure whether they are usefull or not?
>
hmm.... though I am not sure and agree with the raise of OSS message for this issue, but when I read these notes after reading the query I found them to be notified to op.
> Lodewijk can do that simple search himself. I always assume that the person asking a question has done a search before hand...
>
Agreed again. But not sure of his search result. May be his string missed some of these notes and can help him to check the program errors rectified in couple of Notes in 2009. But of course I confess about the uncertainty of the exact solution from my side.
> If it is a basic requestion and easy answer with a link, then I delete it. It has no value to SDN. You are just attempting to do someone else's work for them, and that it not the case here.
>
> Please read the question carefully and answer specifically.
>
read and then posted the message. Also as I was not sure of solution to this particular error I surrendered in advance [mainly for you ]. Still I would like op to view the following notes on SAP Default value maintenance and if he has already done then that is great and I am just not helping with proper suggestion.
[Note 1287998 - Problems when you maintain default authorization values|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1287998]
[Note 1378328 - SU24: Error after deleting authorization default values|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1378328]
Note 1382895 - SU24|Default value maintenance for authorization objects
Note 1235912 - SU24|Display and maintenance of authorization default values|
Hi Lodewijk,
Did you check the change header for USOBT_C in CDHDR and CDPOS? Also let us updated with the reply from OSS please.
regards,
Dipanjan

Need to set default value on Account Search

HI All,
In BSP BP_HEADSEARCH view MainSearch I need to default the value of the attribute 'RESP_AREA' to '01'. I can see the attribute on the value node SEARCH but when get the current context of SEARCH the entity is of a type CL_CRM_BOL_DQUERY_SERVICE and I am not sure how to set the default value.
Any help will be appreciated,
Regards,
Tom

Hi Tom,
When it comes to setting values in a search entity you can not use the normal getter/setter methods because the context node class will be inherited from CL_BSP_WD_CONTEXT_NODE_ASP. In the context node class there will be few attributes (FIELD,MAX_HITS,OPERATOR,VALUE1,VALUE2) that corresponds to the fields diosplayed in the search criteria. The fields VALUE1 and VALUE2 represents the LOW and HIGH values.
To set default value for RESP_AREA you must redefine SET_VALUE1 method and read the ATTR_NAME. If ATTR_NAME is RESP_AREA then you can set the value.
Method SET_VALUE1.
* Get current criterion
data: criterion type ref to if_bol_bo_property_access.
if iterator is bound.
    criterion = iterator->get_current( ).
else.
    criterion = me->parameter_collection->get_current( ).
endif.
* Set its low value from user input
try.
      data: lv_value type string.
      lv_value =
         me->convert_value_from_string( iv_string = value
                                        iv_criterion = criterion ).
      criterion->set_property( iv_attr_name = 'LOW'
                               iv_value = lv_value ).       "#EC NOTEXT
    cleanup.
*     Keep buggy user input for correction
      criterion->set_property( iv_attr_name = 'LOW'
                               iv_value = value ).          "#EC NOTEXT
endtry.
* Set the default value for RESP_AREA
lv_attr_name = criterion->get_property_as_string( 'ATTR_NAME' ).
if lv_attr_name eq 'RESP_AREA'.
    criterion->set_property( iv_attr_name = 'LOW' iv_value = ---- ).
Endif.
Regards,
Arun

Default values in pa30

hi i want to put some default vales in pa30.
how it is possible
regards,
ashwin

Hi,
These are the exits avilable for PA30
HRPBAS01        User Exit for HR Master Data
HRPC0001         HR: PC download authorization
HRRPAI01         User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
PARA0001         Enhancement for Determining the Number of Periods
PARA0002         Enhancement for Calculating Annual Salary; IT0008,14,15
PBAS0001         PA: Pers.Admin./Recruitment: Default values and checks
PBAS0002         PA: Enhancements for Personnel Administration - Menu
PBASRP01        PA: User exit distributed reporting
Regards
Sudheer

Select-options How to assign Default value as "Not equal to something"

My req. is to asssign default value for a select-option as <> "DS1" . I am able to give default value as DS1 But dont know how to give "<> DS1" . Please help me
Thanking u in advance ..

INITIALIZATION.
s_lifnr-low = '0001'.
s_lifnr-high = '0002'.
s_LIFNR-sign = 'I'.
s_lifnr-option = 'NE'.
append s_lifnr.
Regards,
Subramanian V.
P.S. - Raja, still mode = BSP ??? :-P
Message was edited by: Subramanian Venkateswaran

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

How to load a default value in to a column when using sql loader

Im trying to load from a flat file using sql loader.
for 1 column i need to update using a default value
how to go about this?

Hi!
try this code --
LOAD DATA
   INFILE 'sample.dat'
   REPLACE
   INTO TABLE emp
   empno   POSITION(01:04) INTEGER EXTERNAL NULLIF empno=BLANKS,
   ename   POSITION(06:15) CHAR,
   job         POSITION(17:25) CHAR,
   mgr       POSITION(27:30) INTEGER EXTERNAL NULLIF mgr=BLANKS,
   sal        POSITION(32:39) DECIMAL EXTERNAL NULLIF sal=BLANKS,
   comm   POSITION(41:48) DECIMAL EXTERNAL DEFAULTIF comm = 100,
   deptno POSITION(50:51) INTEGER EXTERNAL NULLIF deptno=BLANKS,
   hiredate POSITION(52:62) CONSTANT SYSDATE
)-hope this will solve ur purpose.
Regards.
Satyaki De.

Assigning a default value to a field

Hello Everyone,
       Could you please tell me how to assign a default value to a field in a transparent table, so that while creating an entry even if we don't enter the value, a default value will be assigned.
Thanks,
Anbu.

Like this
DATA: BEGIN OF itab OCCURS 0,
        field1 TYPE c VALUE 'X'
        field2 TYPE c,
      END OF itab.
append itab.
append itab.
You will have by default X set in both rows for field1.
Regards
Marcin
PS: Ooops I just noticed you meant transparent table but I wrote about internal one. As long as you maintain that table using maintenance view you can use event 05 - When Creating a New Entry and set fixed value for a field there. So whenever you create new entry it will receive that value.
Edited by: Marcin Pciak on Jun 23, 2010 8:57 AM

SQLLDR - how to set a default value for an empty string

I'm using SQLLDR to load data from a flat file on Oracle 10g 10.2.0.4 EE, Linux RHEL 4 update 6. Seems like my question is simple, but darned if I can't find the solution.
My source file (comma delimited extracted form a different RDBMS) has some (not all) rows where the output for a string is "", and not NULL. How do I check for empty string and add a default value in the control file? The target column is non-nullable
Here's my current control file - however, the column attributeName where sometimes the source record is "" does not get evaluated as NULL.
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
   TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName "decode(:vc_attributeName,null, 'none')",
attributeDefault)
{code}
When I tried decode with "", I received the following error:
{code}SQL*Loader-350: Syntax error at line 11.
Expecting "," or ")", found ", 'none')".
attributeName "decode(:vc_attributeName,"", 'none')", {code}
This does not work either:
{code}
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
   TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName NULLIF attributeName = BLANKS ,"decode(:vc_attributeName,null, 'none')",
attributeDefault) I get the following in the log:
Table COMPANYMETADATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
L_METADATA                          FIRST     *   , O(") CHARACTER
COMPANY                            NEXT     *   , O(") CHARACTER
CLASSNAME                         NEXT     *   , O(") CHARACTER
ATTRIBUTENAME                     NEXT     *   , O(") CHARACTER
    NULL if ATTRIBUTENAME = BLANKS
    SQL string for column : "decode(:attributeName,null, 'none')"
ATTRIBUTEDEFAULT                  NEXT     *   , O(") CHARACTER
Record 1: Rejected - Error on table COMPANYMETADATA, column ATTRIBUTENAME.
ORA-01400: cannot insert NULL into ("SRV5"."COMPANYMETADATA"."ATTRIBUTENAME")
{code}
Any help is appreciated -
Edited by: kpw on Feb 9, 2009 11:10 AM

Hello,
I just loaded following data successfully in my_data table using the same control file I posted. Yes it will evaluate "" as null and replace with none, remember in control file you have this option, "optionally enclosed by '"'.
#my_data.dat
"myname1", "attribname1"
"myname2", "attribname2"
"myname3", "attribname3"
"myname4", ""
#my_data.ctl
load data
into table my_data
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
my_name char(30),
vc_attributeName "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
{code}
Here is the output log file
{code}
Control File:   my_data.ctl
Data File:      mydata.dat
Bad File:     mydata.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table MY_DATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
MY_NAME                             FIRST    30   , O(") CHARACTER
VC_ATTRIBUTENAME                     NEXT     *   , O(") CHARACTER
    SQL string for column : "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
Table MY_DATA:
4 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array:                  18560 bytes(64 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:             4
Total logical records rejected:         0
Total logical records discarded:        0
Run began on Mon Feb 09 18:17:35 2009
Run ended on Mon Feb 09 18:17:36 2009
Elapsed time was:     00:00:00.98
CPU time was:         00:00:00.10
{code}
Hope this helps clearing your dobuts
Regards

Multiple Default Values in a Multi-Select LOV Parameter?

Hi,
I have a report in BI Publisher standalone version 10.1.3.4. The report has a list of values called org_lov. This lov is attached to a multi-selection p_org_code parameter from which it is desirable to also have multiple default values.
For example, if org_lov has the following values:
100
101
102
103
104
105
106
I would like to have 3 default values and have 100, 101,105 as the defaults if the user doesn't specifically select anything from the LOV. So far my testing has only allowed a single default value.
Here are my settings:
Data type = string
Multiple Selection = checked
Can select All = checked (all values passed)
On the Default Value field, I have tried the following:
1. 100, 101,105
2. [100, 101,105]
3. '100', '101','105'
4. (100, 101,105)
5. ['100', '101','105']
6. ('100', '101','105')
I don't need these default values highlighted in the LOV, I just need it passed correctly to the query (a data template).
Thank you in advance for any input.

Hi,
Sorry for the delayed reply. I tried what you suggested but the problem is that by having the "Multiple Selection" property of the parameter unchecked, the result is that it allows the user to only have a single value passed. The user wants the option to select multiple values AND also have the multiple default values.
Thanks anyway.

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Why the default value is not the Oracle recommended?

Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?

>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com

Default Value in a DFF is not getting populated in Self Service Page

I had an issue in Self Service Page.
In the SS page there is hidden mandatory field in DFF segment,which should get populated with a default select statement.
But this field is not getting populated with the default values.
But this is working fine in Forms , i.e the default value is populated in forms.
Why the default value is not populated in Self Service Pages?
For Eg: If there is a DFF "SAMPLE_DFF" which has some context with segment
Context Code : GB_CODE
Segment : "Enter the Group"
and this segment is made required and defaulted with a select stmt (select stmt returns 'XXXXX')
In forms if am not entering any value, then its defaulted to 'XXXXX'.
But in Self Service this is not happening.
Can anybody help me out...

Actually, I have narrowed down the problem. It is not quite the same.
DFF is Receivables, Address Information (Release 12). We have 2 attributes defined and we want the default value of the 2nd to be dependent on what the user selects in the 1st.
So the default value of the 2nd is defined as a SQL Statement, select :$FLEX$.INDUSTRY_CODE from dual (where INDUSTRY_CODE is the value set name from the 1st).
We know the syntax is correct because if we actually hardcode a default value in the 1st attribute (select 'BLAH' from dual), then we do see that the default value for the 2nd attribute fills in with BLAH as well. However, we do not want that. We want the user to choose a value for the 1st attribute from the LOV, and then have the 2nd attribute default to that same value. This is the part that does not seem to work in OAF, but definitely used to work in Forms.
Any thoughts?
Thanks much!

SUN ONE Ldap - Default value is not getting displayed

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
Can any one help me in this for this issue.
Regards,
K. Senthil Kumar

I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

E-Recruiting: BSP Default Values

Similar Messages

Maybe you are looking for