E-Recruiting - Change the subject of the correspondence letter

Hi Gurus,
Till now the E-Rec correspondence letter has for email subject the activity name (eg: "Correspondence: Rejection").  We would like to replace it by the Posting ID and title. 
I tried to found any things like this which could helps me in img but doesn't seem there is something like in standard.  Does anyone of you could let me know how we could change this subject ?
Thank you
Hadrien

CL_HRRCF_CS_DOC_CAT_SF_SUPER-set_subject

Similar Messages

  • Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

    Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

    If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
    Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, select the Summary tab.  You should see a checkbox that says Enable disk use.  Check it and click Apply.
    NOTE:  If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it.  If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
    So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use.

  • I changed the drive letter on my iPod and now iTunes won't recognize it!

    Help please! I contacted an Apple associate and they told me to change the drive letter of my iPod in My Computer. I did that and now iTunes won't recognize my iPod at all and I can't change the drive letter back to the original one. What do I do?

    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
    Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
    Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.

  • Copy the SQL Binaries and Data to another drive and then change the drive letter to previous drive letter

    Hi All,
    We have SQL Server 2012 SP1 installed on E drive (which means SQL Binaries, Database and LOGs) are in the same drive E, we are not able to backup the SQL Server because according to Backup Vendor their is a problem with the DISK E which is why the backup
    is not successful, We have added one more drive with the same space, we have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to
    start SQL Service but it was not starting, we have again reverted back the original drive to E and service was successfully started, please note here that SQL server service logon is NT service / local service. Please help us that how to do achieve this as
    we are using the same E drive and OS should not know any thing. Please help us to copy and then change the drive letter to E so that we can delete the old drive.
    Thanks
    If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

    We have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to start SQL Service but it was not starting,
    You should not have done this. Even if you install complete SQL Server on Separate dedicated drive few binaries would always go on system drive that is C drive so your idea of moving files to other drive would sure create a problem. As a fact you cannot
    move SQL Server complete installation from one drive to other apart from uninstalling and reinstalling again.
    Copy it back an hope fully you would be able to restart. Why should you take a product which allows you to change sql server drive its a bad product. I guess backup engineer does not how to configure backup agent
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • When changing the drive letter for the ipod itunes still wont come up

    when changing the letter a couple of times itunes wont come up and trying to restore it nothing happens i have reinstalled itunes like 12 times and the 6/28/06 software messed me up i dont know what to do when i turn on my ipod its like i barley got it from the store when i hook it up and change it when i take it off it does that what should i do i need some help please someone i cant do this anymore anything out there

    Try doing a Ctrl-Alt-Del, and in Task Manager click on the Processes tab. End the iTunesHelper and iPodService processes. Then reconnect the iPod and go into Disk Management, and the iPod should show up. Change the drive letter to something other than C, then eject the iPod and restart the computer. When you reconnect it you should be able to get it recognized.

  • How do you change the first letter of a new line from uppercase to lowercase?

    In filling in case sensitive id's and passwords, the iPad automatically capitalizes the first letter---how do you change to lower case?

    You can shut off Auto Capitalization in the settings to prevent that from happening.  Go to Settings>General>Keyboard>Auto Capitalization>Off.
    You can change to lower case manually by tapping the "black X icon in the arrow" in the upper right corner of the keyboard to delete the capital letter and then type in the lower case letter.

  • TS1493 When I go to change the drive letter, I go through the entire process and when I click on disk management, my ipod is not listed. On my computer it is still listed as a digital camera

    I have searched online and tried all the possibilities to fix the issues I am having but have sadly been unsuccessful. My ipod is being read as a digital camera, it is not reading on my itunes therefore I cannot sync any music or apps I have purchased. The only solution I couldn't try was to change my drive letter. Main reason being, my device did not show up under the disk management page.

    If you have pictures (on your iPod) in the Camera Roll, that may be why the iPod is showing up as a camera. The Camera Roll is where pictures taken on the iPod, screenshots taken on the iPod and pictures saved from Safari are stored.
    Copy the pictures from the Camera Roll and put them onto yuor computer. Once you have done that, you can delete the pictures from the Camera Roll and perhaps the iPod will stop showing up as a camera.
    The iPod Touch does not have an accessible hard drive, so it will not show up under disk management.

  • How do I restore missing itunes links by changing the drive letter?

    Bought a new Windows 8 PC and moved my old XP MyMusic folder to the Win 8 Music folder.  Installed iTunes and it automatically found the music and all the music files managed by iTunes in the iTunes sub-folder work just fine.  The problem is I have many other music folders under the top level Music folder and the links to those files are broken.  They are broken because on the old PC everything was on the D drive but now they are on the C drive.
    If I "Get Info" on a track I can see it is still looking for the file on the D drive.  I'd like to do a mass edit to change all the references to the D: drive to be C:.  I've been unable to find a program that will do this.  Or, is there another way?
    An option might be to somehow reorganize the folder structure on the old PC and then re-copy the folders to the new PC.  I do not want to put everything into iTunes folders because that would duplicate everything and make them hard to find.  I often get content outside of iTunes, such as by recording LP's.

    I'll try to double check the mechanism. There is certainly part that compares file sizes to try to ensure the correct match. If your effective media folder is the Music folder above iTunes instead of iTunes Media inside it is there is a chance that files were named by Windows Media Player in the past rather than iTunes? iTunes has different substitutions for invalid characters and limits file & folder names to 40 characters. Have you got any deeper folder nesting than <Media Folder>\<[Album ]Artist>\<Album>?
    This thread shows the list of potential folders that the script will look through. In most cases there will only be a few folders from that list that match any given combination of artist, album artist and album, and in those folders even fewer files that match with the track number and name, and, in most cases, only one that has also has the correct file size.
    It would be useful to have the details of a sample track that the script is failing to locate, its true location and what iTunes shows on the Get Info > Summary tab.
    tt2

  • My ipod nanos are not being recognized in iTunes. I have tried everything! Changed the drive letter, the disk to FAT32, resetted it, downloaded itunes again, but nothing has worked! HELP please.

    Somehow my nano now lost all its music so now its empty!  Also, before windows used to recognize my ipod and i'd get a pop up saying "open to view files" but now I don't even get that anymore. I have also tried syncing it by putting them in disk mode but NOTHING has worked. I am getting so frustrated.
    I followed all of the "steps" on the apple support page but none of that has worked too. PLEASE help me because I literally feel like just throwing my ipods out the window. I never had this problem before.

    When you connect your iPod to your PC, what appears on the iPod's display?  Does the iPod charge when you have it plugged into the PC?
    Are you running the latest version of iTunes (10.6.3)?  It wouldn't hurt to also make sure your Windows OS has all of the latest patches and updates as well.
    I assume you have plugged the iPod ino different USB ports located directly on your PC and tried using another 30 pin dock connector cable to rule out the possibility of a bad cable?
    B-rock

  • How can I change the BlackBerry Link Network Drive mapping from Z: to something else?

    Hello,
    I generally have a mapping to my NFS server on Z:, and my iTunes library has a relative path to Z: for all of my music - the fact that Link is automatically picking Z: as my network sync target for my device does not work for me to sync music, or anything really. I can't figure out how to change this value to something else.
    I found the registry key: \HKEY_CURRENT_USER\Software\Research In Motion\Device Manager\Device Settings\<DEVICENAME>\VolumeMapping with a default blank REG_SZ - can I use this key at all to manually change drive mappings for my device? If so, what is the key/value pair I need and will this mess up any assumptions taken inside the Link software for synching?
    ... Also, I have a Feature Enhancement Request to go along with this issue: Add a "Change drive map letter" button beside the "Turn on wireless connections to my computer" button in Link, and add the same option in the context menu to the 'Device Manager' for the mapping (which currently just says 'Explore').
    Thanks for the help,
     - Jeff

    I do not know a lot about this subject but since Device Manager is not a Device and the BlackBerry Phone is not recognized as a Device in Disk management unless Mass Storage is turned ON it looks as if by design you cannot change the Drive Letter.
    Also if Mass Storage is turned On in the Phone Settings File Manager and BB link will not work but the BB Phone will then be recognized as a Device in Disk Management and the Drive Letter can be changed, this has no effect on the Drive Letters for Device Manager.
    Normally to change the Drive Letter and Paths of a Device once the Device is plugged you would go to Administrative Tools, Computer Management, Disk Management, right click the Device and choose "Change Drive Letter and Paths"
    Changing the Registry or Uninstalling Device Manager but keeping BB Link or looking for a Utility that can change the Drive Letter such as the one that many XP users had called TweakUI (only worked in XP) or changing the Drive Letter for your Network may be the only way.

  • How do I change the color of the matching letter in a matching quiz question in Captivate 8?

    The default dropdown box has white text with a white background. The text for the questions and answers is black. That doesn't change the dropdown letter to black, though. I've tried changing the default styles, and it only changes the main text, not the letters in the dropdown box. An old post for captivate 5.5 mentions changing the text color to differ from the dropdown answer color, but I want the reverse--the dropdown letter color to match the rest of the text. Actually, I'd take any color that would show up on the default white background for the box.
    Please, any answers in layperson terms. I don't know code and am refamiliarizing myself with Captivate after a few years away from it.
    Thanks,
    Sally

    I probably should add that it is only on publish that the text color changes to white. When I'm working in the Captivate program, the dropdown text appears black.
    Sally

  • How can I change the Microsoft Office Click to Run from drive letter 'Q' to something else?

    How can I change the Microsoft Office Click to Run from drive letter 'Q' to something else?
    We have a legacy app that used drive letter 'Q' already, now the newer machines are coming in with 'Q' preassigned to Microsoft Office Click to Run, and it is causing problems.  There has to be a way to change the drive letter assignment to some
    other letter besides 'Q' 

    Hi,
    Office that is delivered by Click-to-Run is installed on the Q drive, this cannot be changed.
    To work around this problem, uninstall the Click-to-Run version of Office and then install with the traditional MSI-based installation.
    To switch to using an MSI-based Office edition, you can learn something useful from this link below:
    http://office.microsoft.com/en-us/excel-help/click-to-run-switch-to-using-an-msi-based-office-edition-HA101850538.aspx
    Regards,
    Melon Chen
    TechNet Community Support

  • When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message.  How can I change the mail settings so that every reply is listed

    When I receive and answer e-mail, the correspondence is usually "nested" "behind"  the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox.  How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message.  I'm afraid I might accidentially overlook messages the way they are handled now.

    Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread".  I think that will make each message show individually.

  • Purchase order by e-mail: changing the e-mail subject

    Hello all,
    We are sending are purchase orders to the vendors by e-mail.
    I would like to know how can I change the e-mail subject to a subject of my choice (for instance the PO number, etc.).
    Thanks for your help,
    Sivan

    Hi,
    You can  change the e-mail subject to a subject of your choice by following way.
    If you want to send a purchase order as (external) mail, for example, to a
    vendor, you have to maintain the mail title in the condition record for the
    output type (for example in Transaction MN05) on the 'Communication method' tab
    page. Enter the mail title in the 'Text for cover page' field. You cannot
    maintain an additional mail text.
    Hope this will help u,
    Deepak

  • How do I change the subject of an inbox and outbox in order to organize them better

    I would like to change the Subject of received and sent mails in Thunderbird. I used to be able to do this with Eudora and it helped me to organize them better especially when the subject and content didn't match!

    They are designed for Thunderbird not Firefox.
    Current version of Thunderbird is 31.5.0 and they work with that version.
    Are you using a Thunderbird beta version?

Maybe you are looking for