E-Recruiting - Doubt about job for changes in HR system.

Hi,
We are on E-Rec 604 with seperated standlone e-rec system.
I did the initial transfer of the Org Management and employees data through PFAL from ECC to E-Recruit and all were ok.
Now we are planning the job for future changes.
The job in e-recruiting is ok, using RBDMIDOC and RBDAPP01.
But I have some doubts with the job in HR system. I think I have to use those steps in the job:
RBDMIDOC
RSEOUT00
RBDMOIND
RBDCPCLR
It´s true?.
And in this case, with those steps the new employees in HR system will be created as internal candidates in E-Recruiting without problems?.
Could somebody help me, please?.
Best Resgrads,
Esther

Dear Esther,
In HR system, you only need to schedule these reports to transfer HR data from change pointers :
RBDMIDOC to created idocs from change pointers
RSEOUT00 to send idocs to the target system
RHALESMD : is used to generate Idocs that have already been processed or failed when report RBDMIDOC was running so
still with change pointers unprocessed in table BDCPV
Hope it helps,
Kind Regards
Christine

Similar Messages

Many doubts about your questionable "change for better" new conditions

I Am an early adopter of Revel and a satisfied customer. I upgrade my account some months every year if I have done more than 50 pics I want to save on Revel. When downgrading my pics remain on Revel. Fantastic!
With the new terms I would have to pay for a permanent upgrade as my account raises the 2Gb free that you are offering.
this not a change for better as you say. Not at all.
As an early adopter will I keep the billing rigths and conditions that I signed up when I subscribed the service? I wait for a clear answer as I am thinking about deleting my account.
Your change sound like a trick... now that I have spend lots of time upgrading many Gb you change the conditions. Not wise at all. and the worst is that we don't know what are you planning for the future....

Darderes-
The new model will not change how the premium accounts work, but all free users will be using the new model once the changes take place. We realize this may benefit some users and not others and apologize if it causes you any inconvenience.
Pattie

Doubt about using for all entries

I have to retrieve 3 columns from 2 tables(MARA and MAKT). How should i device the FOR ALL ENTRIES statement for such a situation??
What i need to retrieve is:
MATNR   from       MAKT
MAKTG   from       MAKT
MEINS    from       MARA.

HI
in final internal table you declare what ever you want from that 2 tables
MATNR
MAKTG
MEINS
and 2 more internal tables like this
1st : MATNR
        MEINS from MARA
2nd : MATNR
        MAKTG from MAKT
write a select query for 1st like this
SELECT MATNR MEINS from mara into itab1 where matnr = p_matnr.
if not itab1[] is initial.
SELECT MATNR MAKTG from MAKT into table itab2 FOR ALL ENTRIES IN itab1 where MATNR in itab1-matnr
endif.
loop at 1st itab1
read on itab2
move fields to final internal table only required fields
<b>reward if usefull</b>

Error in job for connection to CUA System

I have a problem with the two jobs in the u2018AS ABAP - Initial loadu2019 for a CUA system. According to the log is seems to be a memory issue!!!!
Extract from the logfile:
u2026u2026u2026
26.03.2009 09:57:31 :I:Initializing custom pass FromSAP: ReadABAPRoles
26.03.2009 09:57:31 :I:Initializing MX SAP BAPI object
26.03.2009 09:57:31 :W:Filter not supported when Listing CUA Roles. Ignoring :*
26.03.2009 09:57:35 :E:Unhandled Error in DSERuntime
java.lang.OutOfMemoryError: Java heap space (failed to allocate 84038672 bytes)
u2026u2026u2026
This error is related to the both the jobs: ReadABAPRoles and ReadABAPProfiles.
Please note:
Setting the %$rep.CUA_MASTER% equal u2018falseu2019 using the repository constant works for the both jobs (only the roles and/or profile in u2018localu2019 system the is read meaning no data from the subsystems in the CUA is read )
Any suggestions for handling this problem??
Best Regards
Tom Svarre

The text you enter in the dispatcher script after JAVAOPTIONS= is passed on as one parameter to the java executable. When you set JAVAOPTIONS=-Xmx256M -Xmx256M the effect is like the commandline java "-Xmx256M -Xms256M" java interprets this as an illegal heap size and refuses to start.
If you want to specify more than one javaoption, you also have to set MXDISPATCHER_EXECSTRING=1
This option causes the dispatcher to pass the arguments to the java executable as one string instead of split into separate parameters.
The reason this option is not turned on by default, is that this can cause problems with paths and parameters containing special characters that causes the command line interpreter to fail.
In your case, only specifyng the -Xmx is probably the best solution. Specifying -Xms will cause heavier load on the system also for jobs thatdoes not need a large heap.

E-Recruiting 604 Doubt about the planning of the background job.

Hi,
We are on E-Rec 604 with seperated standlone e-rec system.
I did the initial transfer of the Org Management data through PFAL from ECC to E-Recruit and all were ok.
Now I have to planed the job for the future changes.
This is my doubt, I just have to plan the program RBDMIDOC in the HR system, or should I add something more?.
Please somebody could guide me?.
Thanks a lot,
Esther

Hello Esther,
there are some more configuration steps for the regular update after the initial load.
Probably already done by you is the activation of the change pointers for the message type otherwise RBDMIDOC won't create any IDoc.
Additional settings to the ALE you should apply to the system:
- In the e-recruiting system, go to the partner profile settings for the ALE. Open the inbound parameters for the message type and switch radio button in the "process by function module" section from trigger immediatly to trigger by background program.
- Create a variant for report RBDAPP01 on the e-rec system setting the package size to 1
- Plan the report RBDAPP01 as job on the e-recruiting system to process the incomming IDocs
Ensure in the job scheduling of RBDMIDOC and RBDAPP01 that both are running before midnight and the RBDMIDOC is running before RBDAPP01 of course.
Additional E-Recruiting settings you have to do:
- schedule HRALXSYNC on the e-rec system as daily job
- Ensure that the e-rec periodical service PROCESS_CAND_STATUS_CHANGE (class CL_HRRCF_UPDATE_P_STAT) is activated in the e-rec customizing under E-Recruiting -> Technical Settings -> Periodical Services
Best Regards
Roman

Doubt about changes in the routing for the next year

Hello All,
I have a question hope for you guys to gave a brief and technical answer to me.
I have some doubts, one doubts is in the actual routing, can I change the Valid to ( Date) in the routings in the operation. (Example. original valid to date is 31.12.9999 i want to change this with 31.12.2007). Because we want to create new routing with changes for the next year. But it´s necessary the new routing is valid from 01.01.2008 and valid to 31.12.2008.
And I can´t 2 routings with the same valid for 01.01.2008
I have many routings for change and I have other option like change the status (create or release).
Other doubt, the user has a excel file with the changes necessary, how can I upload from excel file to SAP R/3. It exist one program, one procedure u other option.
Your kind response is what am ex[ecting expert. Thanks,

Hi
pl use the ECM functionality (engineering change functionality) for the same..its standard SAP and no need for any special config..
You can channge the same routings by giving the effectivity date in ECR (eng change request)
for creating an ECR pl follow the below steps
=Create Engineering change request - TCODE - CC31
=Click on object type after entering this screen parameters
=Click on status management
=and change status by clicking on Check request
=Select the required objects types to be changed and click on objects to reach the below screen
=Enter the required objects to be changed via selecting appropriate tab.
=Select the object and click on details
=Click on status management
=Go to Header and click on status
=Change the status by clicking upto convert request.
=Click on the save button and Engineering Change Request has been created..
IMP Notes -
Do close and Release the Engineering change request after doing the appropriate changes at both Object level and Header Level
Pl come back for any further clarifications..
rewards will be appriciated if found useful
BR
Sumit

About job postings for Oracle Developers Please Help.

Hi to all.
This is not a specific doubt about development, is for employment.
This is not a Job Posting.
I have 2 years of experience developing in Oracle FOrms (Web ann C/s),with
another tools (like Jdeveloper),etc with a Bachellor degree in System - Engenering
Here in my country(Peru) the pay per hour is almost 5.9 to 6 US$ (a total per mounth is
between 1000 and 950 US$).
As you can see the standar level of salary is very low.
Even that level is considered "high" for our standars. (A Visual Basic /Sql-Server developer gets a 4.00 uS$ per hour).
I have seen (in the Oracle job postings page) amounts like 60 -50 US$ per hour for Oracle Developers.
So I have some questions for you , the real people who works in Oracle enviroments.
-That amounts per hour are really true?.
-IF its true (in countries like USA or CANADA) how much can I save ,having a normal life?
-In have passed the first OCP Exam,(3 left), but it is really necesary to get well-payed a Job?
-There are some many enterprises recruiting foreigners for IT jobs but (if somebody knows...),there are some good ones and the bad ones.Have you been heared about the bad ones,, and who are they??
Please I need your feedback.
Its very important to me any suggestion or comment because I'm planning to work outside.
Thanks for your attention.
null

Hi to all.
This is not a specific doubt about development, is for employment.
This is not a Job Posting.
I have 2 years of experience developing in Oracle FOrms (Web ann C/s),with
another tools (like Jdeveloper),etc with a Bachellor degree in System - Engenering
Here in my country(Peru) the pay per hour is almost 5.9 to 6 US$ (a total per mounth is
between 1000 and 950 US$).
As you can see the standar level of salary is very low.
Even that level is considered "high" for our standars. (A Visual Basic /Sql-Server developer gets a 4.00 uS$ per hour).
I have seen (in the Oracle job postings page) amounts like 60 -50 US$ per hour for Oracle Developers.
So I have some questions for you , the real people who works in Oracle enviroments.
-That amounts per hour are really true?.
-IF its true (in countries like USA or CANADA) how much can I save ,having a normal life?
-In have passed the first OCP Exam,(3 left), but it is really necesary to get well-payed a Job?
-There are some many enterprises recruiting foreigners for IT jobs but (if somebody knows...),there are some good ones and the bad ones.Have you been heared about the bad ones,, and who are they??
Please I need your feedback.
Its very important to me any suggestion or comment because I'm planning to work outside.
Thanks for your attention.
null

When syncing my iPad with my computer I keep getting the notice ' waiting for changes to be applied '. What is this all about ?

When syncing my iPad with my computer I keep getting the notice ' waiting for changes to be applied '. What is this all about ?

If everything is working OK, I believe it simply means that the iPad and iTunes are communicating and that any changes that you made to the sync configuration are waiting to go through. If you updated apps on the iPad and they get transferred into iTunes or if you download new songs onto the iPad and they are being transferred into iTunes, any app data that moves back and forth - those would be changes that need to be applied.
If you can't finish the sync and that's why you are asking, can you provide more specific details?

Keyword.url field bloked for changes in a firefox about:config tab (firefox with yandex)

keyword.url field bloked for changes in a firefox about:config tab (firefox with yandex)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

This is not a question just an observation. happy birthday ipod. thank you for the fantastic 10 years, thank you for changing the way we think about music.

this is not a question just an observation. happy birthday ipod. thank you for the fantastic 10 years, thank you for changing the way we think about music.

frank,
every negative experience is an opportinity to learn. deleting or moderating these experiences would be turning away the chance to learn. as long as users follow the participation rules, we allow even the most negative posts to remain.
as you said, forums are inherently negative by nature as users typically come here to solve a problem. those of us who try to solve the problems are in the minority. we certainly appreciate users such as yourself who voluntarily return to the forum to help out, especially those who initially came here to solve a problem themselves.
thank you as well.
-erik
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Can we change the selection criteria for RV60SBAT Background Job for Billin

We have a requirement to add a new selection criteria for RV60SBAT Background Job for Billing. We want to process back order invoices first. So we want a specific background job to select these. So we want to select any orders that are eligible to be invoiced where order date < the date of background job(r sy-datum ). Any ideas where we can introduce this logic for selection criteria?
Thanks,
Matt

Hi Matt
For your requirement , copy the standard RV60SBAT program to Z program and in that copied RV60SBAT program , maintain the logic that the backorder invoices should be first processed.Then after that regular background job for billing should take happen .Then your requirement can be fulfilled
Regards
Srinath

HT1386 I have an iPod 5, IOS 7.1 and Macook pro OS Maverick, i've updated my iTunes but when I want to sync my iPod it gets stuck on the 5th step "Waiting for changes to be applied" I let them at night for about 8 hours but the syncing hadn't done.

This problem has been happening for the past 3 months. Please help me.

Try:
"Waiting for changes to be applied": Apple Support Communities

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Pre-processing job for Transactions

Hi Archiving Forum,
In SAP help it is mentioned that pre-processing job is optional job. I am trying to run Write job for few of the transactions where the status is completed without pre-processing job.
But when i debugged the write program for - CRM_SERORD archiving object, the program internally checking the I1100 status for each Service ticket/ Order.
Here, all Service tickets were marked completed status on 24/03/2009.
Residency time for all transaction types is 1 day.
I am running the Write job for Service Ticket and Service order on 24/03/2009. - but job is not able to write the data into Archive files.
Should i wait for One day ( where it completes the Residency time) to run the Write job?
If i wait for one day, then the write program is internally checking the status I100 (Archival status). Is this status is updated by default in the CRM_JEST table after completing Residency period ?
Please need concrete answers.
Thanks in Advance,
Kishore

Hi Kishore,
Pre-processing job should be scheduled for archiving objects before runing write program because it will help in basic archivability check and makes the basement for write program.
Without executing pre-processing program write program will fails to archive data. For example: CO_ORDER, MM_EKKO, MM_EBAN and so on... in R/3 system.
Similarly in CRM system Pre-processing program will help
In check, the following database changes for CRM_SERORD:
1) The date of the archivability check is updated.
2) For the archivable data, the status is changed to 'Archivable'. Then the
data is no longer changeable.
3) For the archivable data, the system sends a deletion BDoc type with
message type 'A' (for archiving) via the CRM Middleware so that the other
components involved in mySAP CRM solutions are informed about an archiving
of the data in the CRM server. The system sends deletion BDoc types at this
time because the change to an unchangeable status is the status change
which is relevant from a business point of view.
In CRM 3.0 version
The check occurs in an archiving object-specific preprocessing program
entered for the archiving object in transaction AOBJ.
As of mySAP CRM5.0 it is controlled using transaction SARA check/delete
In your case:
Even after passing of 1 day of residence time service order or service ticket will not be archive since write program will not set the status for archive I1100. Preprocessing program calling functional module and setting the status as archivable (I1100) after all the pre-requisites are met and write program will archive those data.
The status in ST / SO will not be automatically changed after meeting residence time.
Please also read OSS note no 500551.
-Thanks,
Ajay
Edited by: Ajay Kumar on Mar 25, 2009 2:17 AM

E recruitment -career and job Error u201CAn internal error occurred. Please try

Hi All
The issue is E recruitment regarding career and job (internal candidate) in this page select candidate profile I am getting Error u201CAn internal error occurred. Please try again lateru201D (my client using BSP and Portal)
I was checked T- code SLG1 but it show Errors 1) Periodic service was not executed due to concurrent service2) The error occurred in program RCF_PERIODICAL_SERVICES line 41
And also I checked T u2013 code SICF for services hrrcf_start_int tested but here also getting error u201CAn internal error occurred. Please try again lateru201D
Please any one guide me for how to resolve the issue
Regards
Eshwar

Hello Eshwraj,
Please check out the following :
Please check transaction SM37 and check have you create a periodical job for program COM_SE_DISPATCHER. If this is the case this is not correct - only RCF_PERIODICAL_SERVICES has to run as periodical job which indexes the objects then.
Please delete your COM_SE_DISPATCHER job and activate the RCF_PERIODICAL_SERVICES job again and test the service run afterwards.
The services DISPATCH_CPOINTER_FOR_PUB_INT and DISPATCH_CPOINTER_FOR_PU_EXT of program RCF_PERIODICAL_SERVICES do the pre-work which means that they create the change pointers for the
postings which are then processed by program COM_SE_DISPATCHER. These services are only called by program RCF_PERIODICAL_SERVICES. COM_SE_DISPATCHER can't do that alone. Report COM_SE_DISPATCHER is
called automatically.
Best Regards,
Deepak..

E-Recruiting - Doubt about job for changes in HR system.

Similar Messages

Maybe you are looking for