E-Recruiting : Filter details in ALE setup

Dear experts,
I have a small clarification regarding the filter details we specify in the distribution model when we set it up.
We have eRecruiting on a separate instance from ECC & both are on 603.We are integration the ECC data using ALE & message type HRMD_ABA05.
The infotypes that can be transferred are 0000,0001,0002,0006,0105,1000,1001. Is this correct?Can we transfer other data too?
Can someone please specify the exact filter criteria that can be specified?
How do i transfer the objects ? both for PA & OM objects in an optimum way ? Should i transfer the objects one at a time like P, then O etc?
Also, while exceuting PFAL against all objects, i see that at the eRecruiting end there is an error in the iDoc. Status is 51 "Error: insertion of infotype 1001 (return code 3 )". Please help in understanding how to transfer the data in a better fashion into eRec. I can see all the objects CP,BP,NA,O,S C in 1001 in eRec but i have got this error in the iDoc. what should i do?
Regards,
Sowmya

Hi
You need to update the orgunits .... i.e.
first move O,C,S object types and then you can move.......
during initial data transfer: You can search and refer standard notes as well,
Move O in update mode thru pfal : and put infotype 1000 only
Similarly follow for C,S
Then move P data initially avoid putting filters..........
in insert mode......
Then move O.C,S in insert mode.......
After the initial movements then you can update your message types with infotypes like.......
0,1,2,6,105,.1001,1000 is sufficient
also you can do some customising in badis at the e-rec end and also pass 22,23,24 .....
also there are some hrpad entries which u need to pass...in the filter...
check the message type for that......
Regards,
Divya

Similar Messages

  • Inbound ALE Setup for Work Orders in SRM

    Hi Gurus,
    I need help on Inbound ALE Setup in SRM.If i have Inbound Idoc available at SRM side, what needs to be done for ALE configuration so i can post this data to corresponding application documents.
    Which message type, Process code i need to use??Please suggest me.
    Thanks in Advance.
    Regards,
    Manoj Tiwari

    Hi Manoj,
    If you really want to use IDOCs, you'd better post this on an ABAP/ALE forum to get ALE/IDOCs gurus :p.
    But the integration of WO in SRM can be done using the standard process for "External requirement": then have a look on this thread: Work Order needs to move from CRM to SRM/EBP Shopping Cart
    Regards.
    Vadim

  • ALE setup

    I want ALE setup between 2 systems.
    Any reference available

    http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
    http://www.sapgenie.com/ale/index.htm
    chk it

  • We want to take backup of ( RFC ,Printer, ALE setup) Tables

    Hi All,
    We want to take backup of ( RFC ,Printer, ALE setup) Tables before refresh. Could you please suggest me how we can find the related tables to export RFC etc..

    Hi Manohar,
    You can use below methods..
    RFC connections
    For releases < 6.10 SE01 -> create -> workbench req (next popup screen Fill in the BOX Target, write same SID as you are logged on to -> delete task created. Request/Task -> object list -> display object list -> change -> new entries -> r3tr tabu rfcdes -> enter -> extras -> change object function -> entire table -> save.
    Release transport, check transport log, number of exported entries should be the same as rows in table.
    FOR CLARITY:
    SE01
    Create (paper icon)
    Tick workbench request
    OK
    Add description, project id (if listed) and sid (use log if not available) and save
    Highlight unclassified transport
    Delete (dustbin icon) and confirm
    Double click on transport (lowest level)
    Change to update (pencil icon)
    Add entries u2013 PRO = r3tr / OBJ = tabu / OBJECT NAME = rfcdes
    Enter
    Click on key in next column
    Reply yes to save changes and close the warning box
    Update (pencil icon)
    Add an *
    Save
    Similarly ::::::::::
    Table TBDLS (logical names)
    Table IACORDES & IACORSITE (logical names)
    Printer definitions make transport
    SPAD -> Output devices -> Update -> Edit -> Transport -> Transport All
    User masters (if required) make transports
    SCC8 u2013> Selected profile: SAP_USER and target system
    Save batch task info from tables TBTCO & TBTCP in SE16
    thanks
    ashish

  • Customizing description to mass segmentation filter details.

    Hi all,
    I need to know how to assign a customized description to mass segmentation filter details at marketing segment builder instead the default description "empty profile" after assign the selected atribute.
    Thanks a lot!
    Rafael.

    Hi Susana,
    How did you solve this issue please???
    I am having the same problem...
    Thanks,
    Rafael.

  • Sales order details thru ALE

    hi folks,
    i have a simple scenario to do with ALE/IDOCS. i have to create sales order in SAP. And when ever that SO is created the sales orders details should be sent to an external system (here, notepad). could any one suggest me teh step by step proceduer for the same......or atleast some brief procedure hw to acheive this...i also have one more doubt....can we send IDOCS from ECC 5.O to IDES 4.6. if i am trying to do the same it showing some error mentioning that basic idoc type does not exist in 4.6c......can any one resolve my doubt,
    thnx in advance,
    santosh.

    Hi Gouri Sankar,
    would you be able to upload the sales orders with multiple line items using BAPI LSMW?
    if so could you plz suggest?
    Thanks in advance.
    Suresh/

  • Sending sales order details through ALE to External system

    hi folks,
             i have a simple scenario to do with ALE/IDOCS. i have to create sales order in SAP. And when ever that SO is created the sales orders details should be sent to an external system (here, notepad). could any one suggest me teh step by step proceduer for the same......or atleast some brief procedure hw to acheive this...i also have one more doubt....can we send IDOCS from ECC 5.O to IDES 4.6. if i am trying to do the same it showing some error mentioning that basic idoc type does not exist in 4.6c......can any one resolve my doubt,
                            thnx in advance,
                                santosh.

    Thanks for your quick response, Sarathy.
    Yes I am referring to SAP ECC to third party system but using ALE.
    Here is the scenario, a sales order will be created in SAP CRM and that sales order will be replicated to ECC as a sales order. Now I need to generate an Idoc for this sales order to send it to a third party system.
    Regards

  • Repository filter - Details iView

    Dear all,
    I prepared a repository property filter to manipulate special properties (as the name suggests ). In the "KM Content iView" the filter works fine, but if I open the "Details iView" the filter doesn't take action. What I have to do, to enable the filter for every iView accessing the document and showing some properties?
    Thanks in advance
    Walter

    Hi,
    Not sure, why you are unable to retrieve created property.
    The property should be cm_created and namespace , so check if you are using correct property id.
    Always post codes so that we can help you.
    Regards,
    Praveen Gudapati

  • Problame in adding filter group in ALE distribution chanel

    Dear All,
    I am adding filter in ALE(Disribution Model BD64) for Material type, Division,Sales org & distribution channel for outbond Idoc but it still allow to shoot the idoc which are not satisfying the condition. Can anybody please tell me the reason as wel as suggest me the solution for the same .

    Hi Swarup,
    If its SAP to SAP system this error could be because the model is not distributed correctly.
    if its an external system then you need to go to local system and set the filters in zdist2....and then run zdist4 in background.
    Please reward points if useful.
    Regards,
    Adarsh Srivastava.

  • IPad address book does not show contacts' details after iCloud setup

    Hi everyone,
    I setup iCloud today on my Mac and my iPad. It is working fine on my Mac - when creating new contacts they show up online and vice versa. However, a strange thing is happening on the iPad. iCloud syncs the contacts list fine - but when tapping on a contact (in the book layout on the left side) the app does not display any details of that contact on the right side. All it shows on the right side are three buttons: "Create new contact", "Add to contact" and "Send contact".
    Does anyone have the same problem? Any tips/solutions?
    Thanks!
    F

    I had the same problem on both my iPad & iPhone. I adding a contact on my iPad and now everything seems to sync properly. Hmmm, interesting.....  THANKS FOR THE SUGGESTION.

  • Requesting detailed config and setup for forecast 'period splitting'

    I have searched the SAP community, and found little detailed information about configuration and setup for SAP forecast 'period splitting'.
    I have selected the standard scenario in the 'Splitting Indicator' (1 - 2 - 4) in MM03/MRP3 for splitting month periods into weeks - AND - I have set the MRP Type found in MM03/MRP1 to 'VV' as specified (with "obligatory forecast indicator set on, which supports forecasts to be used as a basis for MRP).
    Doing so has not resulted in my monthly inputted forecasts being split into weeks.
    I am thinking that there is some missing configuration that is needed. Please advise if you can.
    Thank you 

    Bert,
    Now I am more curious than ever.  You mention that your forecasts are not generated by SAP, but are generated by an external forecasting program, using requirements type VSF.
    This sounds like your interface program is entering Planned Independent Requirements, not forecasts (for VV MRP type, the MRP element for forecast requirements is called "FORERQ" and not "IndReq").  The field to which you refer ("Splitting indicator" in the MRP3 tab) has no impact on Planned Independent Requirements.  To my knowledge, it only works with the integrated forecast generation program that is commonly used in VV MRP type.
    Best Regards,
    DB49

  • FM to get partner profile details for ALE-IDOCs?

    hi
    is there any function module to get partner profile details in current system?
    extremly sorry my mistake......
    for ALE-IDOCs
    Message was edited by:
            ashwinee mali

    BAPI_BUSINESS_PARTNER_MODIFY   CBP: BAPI for Modifying (Creating/Changing) Business Partner             
    BAPI_BUSINESS_PARTN_GET_DETAIL CBP: Business Partner Detailed Information                               
    regards,
    srinivas
    <b>*reward for useful answers*</b>

  • Details for ALE Message type 'INVOICE'  for intercompany billing ?

    Hi all,
    I have a requirement that i have to create the Invoice receipt for FI when the billing document is created ( VF01)  in the same client?
    Please provide me the details for this
    such as output type , process code and other master data settings that have to fill?
    Thanks,
    Vamshi.

    Hi prakash,
    Thanks for the reply and it is very helpful.
    But i am using message type RD00 and shall i use this?
    Else, please specify the details that i have to maintain to use RD04 clearly stap-by-step?
    Thanks,
    Vamshi.

  • Create idocs for FI documents posted before ALE setup

    The users were creating FI documents normally during May 2006, but the ALE financial interface was not set up until the end of that May.  We are using a FI message type which is a copy from a standard one.
    Is it possible to create idocs from those FI documents posted before setting up the ALE connection so those FI documents can be sent via ALE?
    CM

    To copy number ranges to a new year you do with the transaction OBH2.
    When you want to transport number ranges you ask for problems. Only for a new implementation you can do it but not when there are existing number ranges with postings for that company

  • Port generation error when ALE setup

    Hi ,
    I am getting the below error when i try to generate the Partner profile .
    Port could not be created
    PR3CLNT400          PR3CLNT400
    RFC destination PR3CLNT400 not specified for system PR3CLNT400
    Enter the RFC destination and restart the generation "
    Could you please let me know the reason .
    I have done the same setup for Quality server sucessfully . when i try to do it the same for Production , its giving me program .
    Thanks&Regards
    Srinivas

    Hi,
    How to check 'Logical system ' in Place or not ?
    Path: Go to transaction SALE -> Sending and Receiving Systems -> Logical Systems -> Define Logical System
    I always generate the partner profile manually (via WE20) and always work fine. Sometimes I face an issue when try to generate froom BD64 and the error does not make sense (though happened). Give it try ...
    Regards,
    Ferry Lianto

Maybe you are looking for