E-Recruiting for external and internal candidates

Hello,
I am looking for documents/guides that can show me how to configure E-Recruiting frontend (for external candidates) to point to the integrated ECC (HR + E-Recruiting) backend, and to configure SAP Portal with ESS (for internal candidates) to point to the integrated ECC backend. I am also looking to configure Trex 7.0 for E-Recruiting. I am unable to find any documents regarding this scenario. Can anyone help me locate some material?

Hi Vishal,
There is no standard field available but this requirement can be handled through an enhancement in the specific BSP page. In your requirement it will be personal details tab in candidate profile wizard and it would also necessiate to enhance infotype HRP5102 - candidate information with this field.
You can also refer the blog below contributed by Hemendra Singh Manral to understand how to go about doing this enhancement in the BSP.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/other-topics/e-recruitment%20adding%20additional%20custom%20fields%20to%20requisition%20maintenance.pdf
Hope this information helps.
Best Regards
G Raj

Similar Messages

Configure a sharepoint 2013 site for external and internal access

I need to configure a local install of sharepoint 2013 so that users can access it internally and externally using windows/AD authentication. The internal and external addresses are different.
I have bound an external ip to the domain for external access.
I have created Alternate Access mapping, and bound the host header but I get a file not found message for external access.
Have I missed something here? why the error and how can it be fixed. Step by step process would be appreciated.

Hi Luis,
According to your description, my understanding is that the error occurred when accessing the site externally.
The most common cause for this is that the IIS host header is configured incorrectly. The 404 will appear because we are hitting a different IIS web site and not the one we are intended to.
Here is a similar issue for you to take a look:
http://stackoverflow.com/questions/14953322/sharepoint-2013-404-not-found-while-accessing-site-collection-from-outside
More references:
http://technet.microsoft.com/en-us/library/cc261814(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc263208(v=office.15).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Specific Settings for external and internal display modes?

Does anyone know if there is a way do have different settings that adapt to whether I'm using my Macbook's internal display or am docked to my 23" external Cinema Display at home? It would be nice if the Dock would be small and on the side "internally" and large and at the bottom "externally." Also its a pain if I've expanded a window on my external, then disconnect and have to tidy up my windows again so they fit on my smaller internal dispaly

Hi
Check this document
Page 35 shows how to change icons
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8
Regards
Krishna.

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

Prob creating ABAP Proxy-Interface use external and interna msg definition

Hi,
I've created a service interface using external definition (message type for request and response), imported via WSDL file. However, while creating ABAP proxy in SPROXY, it gave the error message "Interface uses external and internal message definition". I searched through the forum, the questions were raised but no definite answer was found. Is it not possible to generate a proxy if there is any external definition used?
Details of the error message:
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
p/s: My external definition is actually derived from a ABAP FM web service. The reason why i used external definition is that i try to avoid the tedious steps of hard-coding all the data types for the request and response message types.
Any help would be highly appreciated.
- julius

Hi Arvind,
For technical reasons, proxy generation and the respective editors in the Integration Builder do not support the entire language range of XML schema and WSDL. For an overview of which language elements are supported, see the Excel spreadsheet in the SAP Service Marketplace at service.sap.com/xi ® Media Library ® Documentation: SAP XI 3.0 (SP11) u2013 Supported XML Schema and WSDL (EN).
I couldnt find the above document in the service market place. Any hint to find it?
Thanks.
- julius

What are policy firewall port should be permit between meetingplace web external and internal

I deploy MeetingPlace Web Conferencing with SMA.
1. What are policy firewall port should be permit between meetingplace web external and internal (web external on DMZ zone and web internal on internal zone)?
2. Synchronized Globally Unique Identifiers (GUIDs) between internal and external Web Servers used firewall port?

Hi,
List of Firewall pots to be opened are mentioned in following document, you can refer your deployment type and open ports as mentioned.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_Audio-Only_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_WebEx-Scheduling_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_MeetingPlace-Scheduling_Deployments
Regards
Ronak patel

Export - Import In ABAP ( for variables and internal table)

how can we pass value for the variable and internal table using Export and Import?
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
data: var type sy-uzeit.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var,sy-subrc,sy-uzeit.
i found var value 0 while importing.
what is the right syntax for passing value of variable and internaltable.
regards,
dushyant.

Hi,
There are two possible solutions.
Solution1:
Program1.Should be run before atleast once so that TIME should be filled.
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
Program2.IF the TIME is filled,then only it will produce the result.
data: var type sy-uzeit.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Solution2:
Single program:
data: var type sy-uzeit.
var = sy-uzeit.
EXPORT var TO MEMORY ID 'TIME'.
clear var.
IMPORT var FROM MEMORY ID 'TIME'.
write:/ var, sy-subrc, sy-uzeit.
Kindly reward points by clikcing the star on the left of reply,if it helps.

OWA for Iphone and international calling card

Hello,
I work as the Supervisor for a company that has just purchased many iphones. The group that is in charge of email at my company will only allow "OWA for Iphone" to be used because in this way, nothing is downloaded to the device. All email, calendar entries and contacts/people entries are web based. Because nothing is downloaded to the device, the Iphone app for any international calling card company like Reliance or True Roots will not work.
When I say, "will not work" this is why. All international calling card companies apps that I have found, access the local downloaded contacts on the Iphone itself. I have not found any that can connect to the people in the "OWA for Iphone" app to make international calls for cheeper prices.
Is there an international calling card company whose app will work with "OWA for Iphone" and not the locally stored contacts? Or one that I can make the choice, choose the contacts from the local Iphone and or people in the "OWA for Iphone" app?

International calling apps allow you to call an entry from your contact list. When you make a call from your device using this International calling app it will hang up, dial a 1 800 or 1866 number, then redial the international number you dialed and complete the call. This allows you to call for example, India for $.06/minute instead of $.50/minute or what ever your provider charges you. It basically make it so your international calls go through your international calling app provider instead of your phone provider. You still use your phone provider minutes, but the cost is rerouted to your international calling provider/partner.
1. I know, its so hard to do anything. Yes all smartphones (Iphones, Androids, Windows, etc...) The email admins will not allow anything to directly download to the device from the company. The OWA for IPhone app uses the web browser but changes the view of the email to look and feel user friendly. Basically, OWA for Iphone is using the web to look at all email, contacts, and calendar entries.
2. The international calling app (Reliance and all others I have found including Skype) will only look at local downloaded contacts. Because we are using OWA for Iphone there are no downloaded contacts. So, the international calling app does not see the contacts to be able to call.
If I go into OWA for IPhone and go to People and call somebody internationally +44 XX XXX XXXXX it works fine, but the international calling app does not activate becasue the app can't see the number. This is because its looking only at the local downloaded contacts list, not the contacts on the web using OWA for Iphone

Dual setup for internet and internal access

Goal: To set up an Xserve that is both hosting public web sites and internal websites. The server is currently connected to the internet via ethernet 1 and to our internal network via ethernet 2. It serves as a backup failover for our main web server and hosts an internal wiki. The wiki is getting more sensitive company information so we want to cut it off from outside access and guarantee that it cannot be hacked or otherwise seen. Someone mentioned a solution using partitioning of some kind to achieve this separation. I haven't been able to find information on this. Can anyone tell me more about what this may be or suggest a setup that will accomplish the same security.

Here, you have two NICs within one security context.
A security breach made via one NIC can generally gain access to another NIC within the context of a single operating system. Once the [security of the box is breached|http://labs.hoffmanlabs.com/node/1214] sufficiently to cause you problems (whether data exposures, deletions, defacement or otherwise), then the entire box is generally considered to be untrustworthy.
If the breach arrives via http port 80 (and that is a typical web server breach), then (once the breach is made) the box itself is compromised. The firewall block here doesn't get you the degree of isolation provided by a DMZ; a breach via port 80 inward or one of these recent browser-based attacks on the firewall aren't necessarily blocked. (Whether the particular web environment is directly vulnerable to a breach is another and open question. Some environments can be more vulnerable to others, but there's the common assumption that all web-facing and internet-facing environments can potentially be vulnerable. That also ties back to how the box is managed and monitored, and how fast a breach can be detected and isolated and sealed and cleaned up.)
Some operating systems feature technologies known as sandboxes or jails or such, and sandboxes (and jails) are not AFAIK officially available on Mac OS X Server. These are part-way between the default configuration and what's provided by operating as a VM guest. If you really want to learn the innards of the configuration sufficiently, you might be able to get a jail or sandbox or such going, but then tossing another Mac Mini at the problem solves it in what is usually a more supportable fashion than getting a sandbox or jail going and maintaining the configuration over Mac OS X Server patches and upgrades, and application installations and upgrades, and thus at lower cost.
The approach using a VM tries to avoid extending the exposure by requiring the attacker to breach the underlying VM to get further from the box, and approaches based on a DMZ and on multiple boxes also try to contain or firewall a compromised system.

RD Session Broker + NLB doesn't work for external users (internal users on network/WAN are OK)

Hi all,
I have run into an issue as the title of this question suggests.
So the senario is, I have (all Virtual):
2x 2008 R2 Remote Desktop Servers
1x 2008 R2 with Session Broker install
I haven't configured any RD settings on the session broker server (i.e. RD virtual desktop, RD Gateway, etc) It's purely setup as the RD Connection Broker
Each of the RD servers I have configured 2 NIC's. The 1st NIC is configured with NLB (NLB only setup for traffic on port 3389 all other traffic isn't handled by NLB). The other NIC is configured to be used only for session reconnection. I'm hoping this is
the right configuration as it's how I have interpreted these guides:
http://technet.microsoft.com/en-us/library/cc772418%28WS.10%29.aspx
http://technet.microsoft.com/en-us/library/cc771300%28WS.10%29.aspx
Please correct me if I have setup the servers incorrectly and what should be differently.
I have setup the NLBs Cluster IP. A rule has been set on the router to make it available externally
This worked fine with an old single RD Server (same IP as NLB Cluster IP, currently offline so no conflict) before the RD Farm was implemented. So I know the port forwarding is OK.
So NLB and Connection Broker Load-Balancing work well for users inside the network. It spreads sessions evenly and there is no problem with DNS resolving the farm name etc. Sessions that are disconnected are reconnected to the same server, etc.
Accessing the TS Farm from the external address isn't so successful
Connectivity is random. Rarely it works, sometimes it gets to "initiating remote connection..." and then disconnects. It doesn't work more times than it does.
So what do I need to do to get this working? Is there another component or something else that I need to configure to get it all working?
I look forward you your help
Thanks,
Trent

Hi Trent,
If both the RD session broker and the NLB are working fine in
the internal network, I suspect that there is something wrong with the external connection. I’d like to confirm the following questions to narrow down this issue:
1.
Can you PING and telnet this RDS farm name when encountering the “disconnect” issue? For example: telnet farmname
3389.
2.
Can you individually connect to the RDS server when failing to connect it via farm name?
3.
Did you configure any certificate on the RDS server or RD gateway server?
4.
Do you get any event log when this issue happens on the server and client side? If yes, please let me know it word-by-word including the event ID.
Thanks.

How to authenticate external and internal users on different AD

What is the recommended way to authenticate external users as well as internal employees in a customer facing application?
We have external users in an Active Directory in the DMZ and our employees in our internal DMZ. Unfortunately we don't have an identity management system in place and wondering if there is a way we could authenticate user against two active directories without creating a trust between them.
We are implementing EP7.0
Thanks in Advance.

You can also use user partitioning. A feature of the UME which allows for having different user persistence options for different users. What you could do in this case have the external user stored in the local db or an LDAP for the external users and the internal users stored in an internal LDAP directory. For more details about <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/e0/b60b404b2b1e07e10000000a1550b0/frameset.htm">user partitioning</a>, please see the docs.
regards,
Patrick

Fortinet 100D - split switch ports into external and internal VLANs?

I'm building out a small colocation site of two hosts.Would like to minimize the number of boxes that I have to buy and manage, but also need to have a reasonable firewall setup. I will have one firewall box and in an ideal world would like to get away without buying one or more switches to put alongside it.My bandwidth provider is going to give me two physical drops that provide connectivity to two of their aggregation routers configured HSRP. If I was going to connect to this in a typical setup, I'd have an external switch with the two drops attached plus one to the external side of my firewall. I'd then connect the internal side of my firewall to my internal switch, and my hosts to that.Given the low port count vs the large number of ports on the Fortinet 100D, I'm wondering if I can split the ports on the box into two groups and be...

We are excited to share that the City of St. Cloud, Minnesota, has deployed our HC3 Virtualization Platform for its price, ease of use and operation, and reliability as part of an ERP rollout rather than purchasing an additional SAN to host the new solution. Nicknamed the Granite City after the quarries and stone-finishing businesses that gave it its early economic boost, St. Cloud is the 10th largest city in Minnesota with a population of more 66,000 people. The city’s mission is to provide high quality public services for its residents in a cost-effective, responsive, innovative and professional manner given the changing needs and resources available. In an effort to best fulfill that mission, St. Cloud’s IT staff decided it would try to pilot a project with Scale Computing rather than purchasing another X-IO SAN as part of a...

Access to application when external and internal address of EP are differen

I have a problem with access to application in portal. I deployed the application (ear) and it is available by address http://noss.inside.bcc.com.pl:54100/forum/index.jsp in our intranet. External address of portal is https://portal.bcc.com.pl. My application is unavailable outside the company, because in url iView there is an address of internal network. I've tried to use relative address /forum/index.jsp, but it doesn't work. Is there any kind of iView, which can solve my problem?

Hi Julia,
have a look at this Topic: <a href="https://forums.sdn.sap.com/thread.jspa?threadID=65920">How does portal connect a user to internal web site</a>. Basically it is the same problem. Unfortunately Jeremy had not described the solution in detail.
Regards
Gregor

Starting Point for Internal Candidates in E-Recruitment

Hi Experts,
We recently upgraded our E-REC to SAPK-60405INERECRUIT. I noticed that hrrcf_a_startpage_int_cand is now inactive.
Is hrrcf_a_startpage_int_cand the starting point that you use for all your internal candidates, or is there another option?
Thanks in advance.
Shane

Hello Shane,
I assume you have the effect that after importing the support package the ICF service went from active to inactive. This has nothing to do with the support / usage of this ICF service. It is a technical behaviour that ICF services or complete subtrees of services can change from active to inactive during release upgrade, on applying a support package or even when transporting an ICF service.
So you should add "checking the state of ICF services" to your patch checklist as it is something you should always verify, same like run the SGEN, invalidate the http server caches or adjust the otr text contexts.
Kind Regards
Roman

E-Recruiting-Internal candidate Transfer

Hi
External candidate: I am able to transfer the selected candidate from E-Recruiting to PA.
Internal candidate: when the offer is accepted by the candidate how the changes takes place in PA. Can you threw light on this step please.
Thank you

Hi Robin,
the organizational change for internal candidates can also be processed by using transaction PA48.
When using the data transfer activity e-recruiting transferes data via a RFC function module call into table T725F. If you dothis for an external candidate e-recruiting will generate y dummy employee id for the data and when you run PA48 it starts an Hiring Action. If you transfer an internal candidate its data is put into the table with the correct employee Id. If you run PA48 the system recognizes the employee id as existing one and starts an organizational change action.
I think just the label on the button in PA48 is a bit misleading.
Best regards
Roman Weise

E-Recruiting for external and internal candidates

Similar Messages

Maybe you are looking for