E-recruiting in portal

we have installed (and adapted) the e-recruiting component. Everything is working as planned.
Now we would like for internal candidate to access their screen / application using the portal.
We managed to create a webdynpro iview, add it to a page and role, and display the start screen as needed.
However, when the candidate try to access a publication/offer, the WDA try to open a new page, and then display an error stating that the action is not autorized.
Does anyone know what i need to to to autorize this action ?
As an added difficulty, the portail in version 7.01, while the ERecruiting application is 7.3, so i don't know if component are needed.
best regards

Hello,
We have completed all the prerequisites. Connection between the portal and the EREC system is OK and working. Interactions with the WDA in the portal for the internal candidate are also working :  we can display the screen, search for a job... and so on.
The problem is when we select a job offer, the WDA try yo launch another WDA in a second window, and that the portal block this operation stating that we do not have the autorisation for this action.
the EREC system is a 7.3.
The dev portal is a 7.01, (7.00 SP17)  where the ESS E-Recruting have not been added. Since a move to the 7.3 portal is expected in a few month, i've been asked to minimize operations on the current one, thus my wish to add the minimum (ie one role/worset/page/iview)

Similar Messages

  • How  to configure E Recruiting in portal.

    Hi
    After installing  ESS and MSS in ( ECC600 & EP 70).
    How  to configure E Recruiting in portal.
    Thanks & Regards
    Daya

    Hello Daya,
    BP deployment is done via using JSPM by your Basis consultants.
    Download the BP package from this [link|https://www.sdn.sap.com/irj/sdn/contentportfolio]
    http://help.sap.com/saphelp_erp2005/helpdata/en/9e/fc4686de064279b5e5476d40734427/frameset.htm
    Also, [check this|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/mss-e-rec%2bconfiguration] for confugration of E-recruitment for webdynpro Java version.
    Regards,
    Anil Kumar

  • E- Recruitment related Portal work items

    Hi All,
    we are in the process of implementing E- Rec 6 in EP 6. This being the context require inputs on the following
    1. How to go about installing TREX. can this be done by SAP HCM functional consultant or needs to be done by Portal consultant. If so what is the level of knowledge required by a Portal consultant
    2. What all to be done wrt making the E- recruitment related pages i.e External Page, Internal page, Administrator, Recruiter etc UP and Running. Again to do this what is the level of knowledge required by a Portal consultant.
    would appreciate a knowledge sharing on this.
    thanks in advance

    Hi
    Portal consultant should takecare of Trex Installation .
    check the installation guides and proceed
    /message/157030#157030 [original link is broken]
    Koti Reddy

  • E-recruitment 6.0 - Smart Form - Text Module - Qualifying Event

    Hi all,
    Once more a question:
    E-recruitment 6.0
    Smartforms with invitation letters (for example for an interview)
    In the recruiter's portal we use a 'qualifying event' to 'set' an appointment' , date, time, place etc.
    We use the input from this reference activity in the text module of the smartform.
    The text module holds the main text of the letter.
    The text from the module appears in the recruiters portal when the recruiter performs activity 'send letter' (act. type: invitation) so that he can add some text manually if he likes.
    This functionality is in E-R6.0 since SP7
    It goes well when the recruiter does not add anything manually. The variables load in the smartform and it works as wel wanted.
    BUT when the recruiter manually changes the letter (the text module) in the recruiters portal, all variable are lost from the letter.
    I hope someone can help me out.
    Edited by: N. Lodewijk on Dec 4, 2008 11:57 AM

    You need to use the functionality "Changeable letter".

  • How to Design Attractive Logo In Adobe Photoshop?

    Hi
             I am working on adobe Photoshop to design a Logo for a Recruitment Job Portal E-Recruitment Hub - Govt Jobs Notification 2014 Online Application Form and  i am trying to making an attractive logo for this jobs site. Dear all please suggest me better logo design for this jobs site 
    Thanks and i am waiting for reply.

    It will depend on the image. If it was one that was saved as a psd file and has layers (window>layers) {Look in the layers panel and see if you see a layer with a thumbnail that looks like a large T} In this instance, you can double click on that thumbnail to highlight the text then type in its replacement.
    If the image is a jpg which does not support layers, transparency or live text, then that would mean that you need to use the selection tools to select that text and fill it with the same color as the background. You can then use the text tool to type in the text you want.
    Remember to save a copy as a psd file so you can edit the text at a later date.

  • Smartform - text module - qualifying event

    Hi all,
    Once more a question:
    E-recruitment 6.0
    Smartforms with invitation letters (for example for an interview)
    In the recruiter's portal we use a 'qualifying event' to 'set' an appointment' , date, time, place etc.
    We use the input from this reference activity in the text module of the smartform.
    The text module holds the main text of the letter.
    The text from the module appears in the recruiters portal when the recruiter performs activity 'send letter' (act. type: type invitation) so that he can add some text manually if he likes.
    It goes well when the recruiter does not add anything manually. The variables load in the smartform and it works as wel wanted.
    BUT when the recruiter manually changes the letter (the text module) in the recruiters portal, all variable are lost from the letter.
    I hope someone can help me out.
    Edited by: N. Lodewijk on Dec 4, 2008 11:47 AM

    You need to use the functionality "Changeable letter".

  • E-Recruitment and IBM portal integration

    Dear Experts,
    I am going to start working on new project. there they want to implement the E-recruitment. but they are not going to use ESS /MSS. they have their IBM portal in place.
    can some one tell me how to integrate the SAP ECC and IBM portal. the middleware is web sphere.
    what are the key points to keep eye on.
    if any documents are there please forward me.
    thanks and regards
    chandra

    hi sunil,
    we are planning to implement the EHP 4.0 (which is coming to market in May 2009).
    any detailed idea?
    thanks
    chandra

  • Integration of SAP e-Recruiting 6.0 in Enterprise Portal 7

    Hi,
    I'm trying to integrate e-Recruiting functionalities into our Portal.
    The current situation:
    SAP e-Recruiting 6.0 is set up (integrated on ECC 6.0), and works fine when using the BSP-front-end.
    De ESS/MSS Business Packages are installed on the portal.
    The system alias for e-recruiting is created (and tested).
    My test user has the ESS Portal role, and the role "SAP_RCF_INTERNAL_CANDIDATE" in the backend system.
    The problem:
    When I log in with my test user, and go to "ESS" => "Career and Job". I have several options under "Job", being:
       - Applications
       - Apply Directly
       - Favorites
       - Search for Jobs
    All of these are related/connected to the e-recruiting module. All of these functionalities work fine, when log in to the e-recruiting BSP's directly. But when I click on them via the Portal, I get the message "An internal error occurred. Please try again later."
    When I go to transaction "SLG1" for a detailed error log, I see "The system accesses Customizing table T77RCF_sp_ID using parameters [0000]. There are no entries in the table for this."
    When I use the BSP-pages, I can set the parameter RCFSPID via a parameter in the URL (e.g. "application.do?BspClient=800&BspLanguage=EN&rcfSpId=0001"). And via this parameter, the system knows which recruiting-role I have (e.g. 0001 = Internal candidate and 0002 = External candidate). But this value is not transmitted to the BSP pages when I access them via the Portal.
    What I tried was editing the iview "Career and Job Services". I set the value "Parameters forwarded to BSP" to "rcfspid=0001". But that was not the solution.
    So finally my question:
    Where do you set this parameter?
    Thanks!

    Hi,
    Other applications are fine (although the Portal is not 100% set up yet). I think this is related to the link between the portal and the e-recruiting module.
    More details:
    Serious error; see log
        - The system detects a technical inconsistency.
        - The operation will be terminated.
    The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56   
         - Termination takes place in:
         - Main program: CL_HRRCF_ABSTRACT_CONTROLLER==CP
         - Subroutine: CL_HRRCF_ABSTRACT_CONTROLLER==CM001
         - Line in source code: 56
    Customizing table T77RCF_sp_ID contains no corresponding entry for [0000]   
         - The system accesses Customizing table T77RCF_sp_ID using parameters [0000]. There are no entries in the table for this.
         - Either a program error or an error in Customizing exists.
    The error occurred in program CL_HRRCF_T77RCF_SP_ID=========CM001 line 25
          - Termination takes place in:
          - Main program: CL_HRRCF_T77RCF_SP_ID=========CP
          - Subroutine: CL_HRRCF_T77RCF_SP_ID=========CM001
          - Line in source code: 25

  • Error while using Recruitment application in ESS Portal

    Hi Experts,
    We are facing  two   issues when we are using recruitment application.
    By this applicaton,the concerned can raise a requirement to the recruitment dept.
    Some users are uanble to use the application.
    After filling the data,some users are getting the error as "Unable to send E mail notification  and can not complete action.This activity could not be read.
    And another error  of the application is after completion of enrtering details some users are getting the error message as " HR Requisition request  successfully created with ID XXXXXXXXXX .Request is assigned to NULL.
    Kindly help me out for the resolution of the issues.
    Regards,
    Sairam.

    Hi Andy,
    Thanks for the reply.
    We are not using e-recruitment.
    We have developed a portal application called Recruitment application.
    By this user can raise the requirements in his deprtament and time to be filled.
    E mails were already  there in in communications infotype.
    Please advice me to resolve the problem.
    Regards,
    sairam.

  • Error while accesing requisition from recruiter role in portal

    Dear Experts ,
    When we are trying to access *requisition in recruiter role in portal it is showing you are not authorized to perform this applcation. Can you pleae suggest me what will be the problem.
    For clarity we are having EHP4 , and the portal nw7.1 , we have assigned SAP _ALL to the user we are testing and in portal we had assigned super admin , recruiter , recrutiment administrator.
    Quick reply is highly appreciable.
    Thanks & Regards,
    Ravi

    Dear Bala ,
    Thanks for your support the erro got resolved actually the candidate has not been maintained , after doing that in weekend it got resolved.
    Thanks
    Ravi vemuri.

  • E-Recruiting BSP iView errors in the Enterprise Portal.

    I am trying to get my e-Recruiting BSP applications to work correctly in the Portal. But unfortunatley I consistently get this error message.
    The following error text was processed in the system:
    BSP Exception: Das Objekt application.do/start in der URL /sap/bc/bsp/sap/hrrcf_start_int/application.do/start?sap-syscmd=nocookie&sap-client=&sap-language=en&sap-accessibility=&sap-ep-version=7.00.200611091758&sap_ep_version=7.00.200611091758&sap_ep_baseurl=http%3A%2F%2Fsnocfpd1.myco.org%3A50100%2Firj ist nicht gültig.
    The BSP
    https://snocfrd1.myco.org/sap/bc/bsp/sap/hrrcf_start_int/application.do?rcfLogAppl=SEARCH_JOBS
    works fine.
    anybody have any ideas how to troubleshoot this? I'm assuming it has to do with all the rest of the garbage parameters the Portal is sending to e-Recruit.
    -Tim

    Hi!
    Obviously the BSP iView is configured wrong. Have closer look at the URLs:
    BSP in native browser:
    https://snocfrd1.myco.org/sap/bc/bsp/sap/hrrcf_start_int/<b>application.do?rcfLogAppl=SEARCH_JOBS</b>
    BSP in Portal:
    /sap/bc/bsp/sap/hrrcf_start_int<b>/application.do/start?...</b>
    Obviously the iView contains a parameter start or you defined the BSP application name as application.do/start
    Regards,
    Volker

  • E-Recruitment Applications in Websphere Portal

    Hi,
    We have a requirement wherein we need to have E recruitmtnt applications in IBM Websphere Portal.I have gone through few documents and i am not clear how to move forward.Could anyone suggest some best way to achieve this.
    1.If we do Integration between SAP Portal and IBM websphere, can we get E Recruitment applications in Websphere Portal.If this is the way what might be the issues we are gong to face moving forward.(As suggested through SAP iView Integration Portlet i guess)
    2.As E recruitment applications we are using is completely based on ABAP Webdynpro,is it possible to display these applications directly from ECC to IBM Websphere Portal.(As every WDA is associated with an URL,  can we make use of this URL in Websphere)
    3.Again E recruitment Portal content needs SAP Portal because some of the functions of the roles ( like Recruiter iview , Manager Iview etc are delivered as Portal Content).Can we achieve all these without SAP Portal.
    I would be great if someone suggest me the right way.
    Regards,
    Anil

    Closing the thread as i havent got any response

  • E-Recruitment External Candidate Page in Portal

    Hello All,
    we have E-Recruitment 6.0(Stand alone installation) and EP 7.0.
    Have configured Anonymous logon in portal and created iViews for the External page(ABAP webdynpro for application hrrcf_a_startpage_ext_cand), since its a ABAP Webdynpro iView it is checking for the usermappin for SSO and hence the application thows error.
    The application is displayed properly using the URL
    "http://<E-rec_host_name>:<port 8000>/sap/bc/webdynpro/sap/hrrcf_a_startpage_ext_cand?sap-language=EN"
    The problem is only when trying to access through the Portal; We need this since we are exposing portal externally.
    As the main purpose of the application 'hrrcf_a_startpage_ext_cand' is to display a logon page and also allow a user to register, there should not be any user mapping done.
    Really confused how to handle this scenario; Can any one help in integrating this E-Recruiting with Enterprise Portal.
    Thanks All in advance.

    For the GUEST user in portal we have done usermapping to the E-Recruitment system using 'J2EE_GUEST' user in E-Rec.
    In SLG1 we are gettting the following errors
    An exception occurred in E-Recruiting.
         CL_HRRCF_ABSTRACT_CONTROLLER==CPCL_HRRCF_ABSTRACT_CONTROLLER==CM00156
    No candidate could be found for US J2EE_GUEST
         The system cannot find any candidates using the data specified.
    Error while creating candidate

  • E Recruitment Standalone system needs to connected with portal

    Dear E rec experts
    I am having e rec standalone system and a SAP HR system , Presently portal is connected with  SAP HR system, I need to connect the portal to E rec server as well . Our Basis team did the SLD and SSO  configuration , and portal system object also have been created to point the portal with Stand alone system . still i can not  connect to e rec system with the portal.
    Can any help with  the java connector component name  for e rec stand alone system with  HR system , if jico is the solution for this issue.Else Please  advice me any other solution -
    Regards
    Abhi

    Hi Abhi,
    Jco is for Java components. E-recruiting does not use Java Web Dynpro, but rather BSP and ABAP WD.
    You link the systems via RFCs:
    Call SM30, table T77S0 and check following parameter:
    in RECFA HRRFC the destination to the HR system should be maintained
    for this destination you can check if the connection is working by going to transaction SM59 -> ABAP connection -> double-click on the name -> button "connection test" to confirm the connectivity.
    Afterward, you have to create the ALE distribution model so that you can transfer data via PFAL tcode and check the received Idocs on T-code BD87.
    Regards,
    Bentow

  • E-rec  Errors in search of candidates in e-Recruiting portal and transactio

    Hi, please need help to:
    1. In e-Recruiting portal under the tab "recruiter":
    "Services-Candidates-Search for candidates" running "Search button" and are 3 internal error (no detail of the error).
    If we ignore the errors and rerun the "Search button" then we appear 1 internal error and a message that "No data available", but we know that there are candidates in the SAP R / 3.
    2. When we execute the transaction SLG1 in SAP R / 3 are the following errors:
    Fatal error, see log
    An exception has been detected in e-Recruiting.
    An exception has been detected in relation to the search mask
    Technical Details
    error ID: 3C466BE84D30748BE10000000A1145AF
    Class of error: CX_HRRCF_SEARCH_MASK
    context error: CX_HRRCF_SEARCH_MASK
    Error in the program emerged
    CL_HRRCF_SEARCH_MASK_GROUP====CM003 line 40
    An exception has been detected in e-Recruiting.
    CL_HRRCF_SEARCH_MASK_GROUP====CPCL_HRRCF_SEARCH_MASK_GROUP====CM00340
    Technical Details
    error ID: 3C466BE84D30748BE10000000A1145AF
    Class of error: CX_HRRCF_SEARCH_MASK
    context error: CX_HRRCF_SEARCH_MASK
    Thanks.

    Thanks Shane LaBonte,
    Package Bussines. We have the following installed:
    RECRUIT 1.40 for BP ERP Recruiter
    ADMIN RECRUITING BP 1.40 for ERP Administrator Functionality
    ERP05 BP 1.41 COMMON PARTS
    MSS ERP05 BP for Manager Self Service 1.41
    ESS ERP05 BP for Employee Self Service 1.41
    We have activated 4. (we EHP4)
    HCM_ERC_CI_1
    HCM_ERC_CI_2
    HCM_ERC_CI_3
    HCM_ERC_SES_1
    Is there anything else we should take account?
    Regard

Maybe you are looking for