E recruiting:Link for Managers requisition page in MSS

Hi All,
I need to know the BSP page which is used to raise requisition for the mangers through MSS
Secondly I also need to knwo how to genearte the url for this BSP page.
Any Help is greatly appreciated
Thanks and best regards
Rajeev

Hello,
The requisition request view in MSS is an iView from the MSS package and can be found under 'Teams'. The iView is called:
com.sap.pct.erp.mss.requisition_creation
Regards,
Nicole

Similar Messages

Change link for a web-page in CRM 3.0

Hello.
I'm new to CRM and have a problem with a link in cic0.
Before we had a link to linjegods.no, but now we have to change this link to another web-site called schenker.no.
Where is it possible to do this change?
This is an old crm (BBPCRM 3.0)
Please can somebody help me?
Points will be awarded.
Best regards
Harald Vedvik

Hello Muralidhar and thanks for your answer.
There is no error here.
The problem is that the web page www.linjegods.no dont exist anymore.
Therefore I have to change the link to another web page.
But I dont know where to change this link.
Best regards
Harald Vedvik
Edited by: Harald Vedvik on Jan 16, 2008 9:36 AM

E-Recruiting :Webdynpro for ABAP start page modification

Dear Experts,
We will be using the wbdynpro for ABAP screens for candidate profile for a succession planning implementation.
We have a requirement to change the start page as well as the candidate profile screens.We need to change the overview screen as well.
In the IMG activity,i can see the node to change the start page.
Can someone please help me out with the following :
1) Start page id : I can specify 9NNN
Config id : ???
What exactly is the config id? i am totally new to webdynpro technology & webdynpro ABAP.
Documentation says "Enter the Web Dynpro configuration identifier (component configuration ID of the start page component) that defines the start page variant."
I went to SE80 & found the component for the start page & even went to the editor for component configuration(this opens in a browser).
Should i create my own configuration id here?
what else do i need to do.
2) After creating the configuration id & creating a custom start page,how will the standard link to the webdynpro start page be modified? how do i refer to this custom start page?
Please help as it is a matter of urgency.Assistance will be appreciated & rewarded.
Thanks in advance.
Sowmya

Dear Rajeev,
Thanks for the quick response.
The entry in the table T77RCF_WD_SP_IDC will be taken care through the entries in the start page of the IMG activity.But do this i need to know what is config id. Can you please help me with this.
We cannot make changes in T77RCF_WD_SP_ID.
Regards,
Sowmya

How to hide welcome user and logout link for only specified pages

Hi,
I have few pages in my application like forget password page, in which i don't want to show logout link on top corner and welcome message. For rest other pages its ok. If I edit the template body for doing it then in all pages the welcome user vanishes, where i need to hide it for some specific page only.
Please give some idea.
Thanks,
Chandra Bhanu

Go to Shared Components/Templates.
Find the page template that you are using and click Copy.
Go into the copy and look for &USER. and #NAVIGATION_BAR# and delete.
Go to each page that does not need the user and navigation and assign the new template.
This will get rid off the user details and the navigation bar.
Gus

Creating Links for other Web pages within Flash C23

Hello Everyone,
First of all, I'm sure you're tired of answering the
questions regarding "Links". Although, I'm having a very
difficult time with this issue. I just purchased Flash C23,
taken all the tutorials from www.lynda.com, but
I do not find answers for linking one web page to another
within Flash C23. I have read all the answers
on this forum and still can not get my buttons to link up to
my other web pages.
I have figured out how to create the buttons, although, I'm
not doing something right when I try to link up my web
pages. You have to realize I'm coming from Adobe Golive (no
need for codes or scripts). I do not want to stop
using Flash... Can someone help?
Thank you so much, it's appreciated.

replace 'siteName' with whatever you use to target your site
in a browser. 'FranchelleDesigns' is what you named your page in
GoLive.
function loadPage(event:MouseEvent):void{
var myURL:URLRequest = new URLRequest("
http://www.siteName.com/FranchelleDesigns.html");
navigateToURL(myURL,"_blank");
my_btn.addEventListener(MouseEvent.CLICK, loadPage);
EX: my website is
http://www.damonedwards.net
lets say I create some HTML page that I want to link to, and I save
it as, ContactMe.html... this is what I would use in flash to link
to it
function loadPage(event:MouseEvent):void{
var myURL:URLRequest = new URLRequest("
http://www.damonedwards.net/ContactMe.html");
navigateToURL(myURL,"_blank");
my_btn.addEventListener(MouseEvent.CLICK, loadPage);

How to Create Blank pages & no links for more pages

Hello,
just started using iweb ...is there a way to create a blank page not associated with pictures, podcasts movies etc and I want to create a site with multiple picture pages but i dont want a link for every single page on my heading or that area between my header and the body.
whats happening right now is there is a link for every page in my site on the heading if i keep this up my heading will look like a big paragraph
thanks for any help

If you want a page not to be displayed in the navigational menu, then just click on the Inspector and click on the Page tab (second from the left). Under the name of the page (which you can also change here) there is a box to include page in navigation menu. Just uncheck that box and your page won't show up. Of course, I assume you will have a link to the undisplayed page(s) from other pages that are in the menu.
Hey, if this answered you question, could you please click on the "solved" or "helpful" button that you see in the title bar of my reply? I would really appreciate it.

Creating a PDF from Word, endnote links jump to wrong page

I have a Word file with a large number of endnotes. In Acrobat 9.5.5 the endnote links jumped to the correct page. In Acrobat XI, which I just upgraded to, all endnotes jump to the wrong page. Somehow when converting the Word to PDF the calculation of what page to jump to is calculated incorrectly. Is this a known problem? I see other discussions on problems with endnotes but they are for different problems. How can I resolve this. I don't want to have to revert to Acrobat 9, but it worked.

Well I tried that. I set the printer driver to Adobe PDF. I then selected all text and hit F9 to refresh all links and saved the file and then went to the Acrobat tab to create the PDF version. Using the application and importing the file to create a PDF causes the same result. I can now see a pattern of what is happening. This has a large number of endnotes, 525. There are probably 30+ endnotes links per page. I noticed that all the endnotes links for the first page that has the links all point to the second page of endnotes in the endnote section (strange that it starts with the second page and not the first), then all the endnote links of the next page point to the third page of endnotes and it continues that way until the end.
Another way to describe this is that the first page of endnote links should point to endnote pages 1 through 4 but they all point to page 2.
I checked and all the links in the Work doc are linking correctly.
I wonder if version XI has been rewritten since version 9 and my case is too extreme for this version and it chokes. I'm trying to rebuild part of the file from scratch and see if the problem goes away since there is a lot of history to this file and it started at least at Word 2007. I'm using Word 2013 now and have converted the format to the 2013 level.
I've sent in a bug report but have not heard anything and talked to customer service over chat but they don't seem to care enough to pass this to development even though it's easily reproducible.
Thanks for your help.

Broken Link For the verizon 700wx updater 1.24

Help!!! Followed the link www.palm.com/700wxverizon-update from
http://www.hpwebos.com/us/support/mobile/treo700wx/downloads.html and was sent to
http://kb.hpwebos.com/wps/portal/kb2/common/article/10133_en.html which told me
Warning
Sorry. You may have asked for an item that does not exist. Please check the web page address or go back to the last page.
Could someone please tell me where to find the updater!!!
Post relates to: Treo 700wx (Verizon)
Post relates to: Treo 700wx (Verizon)

From my recollection, the update was removed approx. 2 years ago. This was an update to WinMobile version 6 and Microsoft removed the update for the phones.
You may be able to find it somewhere on the internet if someone downloaded and saved the update.
The only updates avail. now are on the support page for your phone under downloads.
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb2/na/treo/700wx/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Link for BC4J Struts-JSP and Tiles

Hi,
I have a JSP-Struts application. By the default generation, JDeveloper build a main.html Page. This page have many Frames and one Frame is "navFrame". On this frame I have a link for a JSP Page : Browse. The call is OK. No Problems.
No I have another Page with Tiles :
<template:insert page="IMDLayout.jsp" flush="true">
<template:put name="title" value="Invoices Interface" />
<template:put name="header" value="/tiles/common/header.jsp" />
<template:put name="footer" value="/tiles/common/footer.jsp" />
<template:put name="menu" value="/tiles/common/menu.jsp" />
<template:put name="body" value="VInvoiceUsersView1_Browse.do" />
</template:insert>
The "body" Tiles call the same JSP Page as the link on the "navFrame", but now I have the following error :
[ServletException in:VInvoiceUsersView1_Browse.do] Response has already been committed'
Why ?
Please help me, I need a solution. Does somebody use BC4J/Struts/Tiles ? Any Experience ? Problem ?
Thanks
Yves

Repost

E-Recruiting EHP4 WebDynpro link for create internal application and portal

Hallo there,
we have installed ehp4 with web Dynpro and I am searching the link for creating an *internal* application.
The external Aplication I found in the se80 ERC_C_APPL_MGMT_UI. But this link is only for external applications.
The other Links I try to find is for the portal. I need it in the ESS and the MSS.
I didn't find them in the package PAOC_RCF_UI_SELF_SERVICES.

Hello,
For creating manual internal and external applications, the WebDynpro application is the same - ERC_A_APPL_MGMT. The component is the same ERC_C_APPL_MGMT_UI as you have said in your e-mail. In this component you can also check the view V_APPL_DATA and see that both fields for internal and external are available. The fields are determined at runtime based on whether you have selected 'Internal' or 'External' link in the portal. In the recruiter portal role, when configuring the pages for internal or external you use Application Parameter IS_INTERNAL. If IS_INTERNAL=X then this parameter will be passed to the component mentioned above and the system will know that it should display internal candidate fields. If IS_INTERNAL=' ' then system will display for external and this is the default.
You can click package PAOC_RCF_WD_UI > Web Dynpro > Web Dynpro Applicat and right click ERC_A_APPL_MGMT to test. When the page opens, you can add parameter &IS_INTERNAL=X to the URL and you will see it will change to internal application page.
Hope this helps.
Regards,

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

How to link the same horizontal page for two different vertical pages without duplicate them?

Hey guys,
Is there a way to link the same horizontal page on two different vertical pages without duplicate the horizontal page?
I have a doublepage of a book splitted in two parts in different vertical pages but i want link the fullsized image in the horizontal page for both of them. Got that? hahaha
Thank you all

Confusing But interesing.
I think it's possible. I have a idea. It will need one advanced trick.
To explain it, I need test simply haha.

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

The download link for After Effects CS5 leads to a page with "access denied"

I need to download this application (i already have a license) to install on a new machine but the link for the Mac OSX file leads to this page:

Cookies and Java are/were enabled in both Chrome and Safari, same results. I should also add that I have already downloaded other old products (CS4 suite) with no issues.

Need a link for FF sent to my email. The link is not showing up on my IE page on my new computer in IE 8 or IE 9

Need a link for FF sent to my email. The link is not showing up on my IE page on my new computer in IE 8 or IE 9

Did you set up virtual pads to assign the Simmons kit in layout mode? In layout, select the group controls tab in the screen control palette. Select the desired pad group(8, 12, or whatever) and drag it onto the layout area. Select a pad and press assign in the screen control inspector. Tap on a Simmons pad and it should be able to learn the pad assignment and note number. Repeat for the other pads. Hope it works for you.

E recruiting:Link for Managers requisition page in MSS

Similar Messages

Maybe you are looking for