E-recruiting notifications queries

Hi Gurus,
Please help me with the following queries regarding the e-recruiting notifications::
1. How can we send an automatic notification while extending an offer to the refferer if the application came from an employee referral source?
2. How can we send automatic periodic notifications to all the applicants with profiles in the Talent Pool, to remind them to confirm/update their resume details.
3. How can we have an automatic notification after each completion of any of the recruitment activity.
4. Is the automatic tracking of correspondence generated in e-recruiting possible.
Regards

Hi,
There are some standard workflows. based on the standard events which need to be modified to incorporate your logic.
a) Extend an offer: For every activity created in the system an event is triggered in the system, a workflow is attached to it (you need to activate it) which is called... this workflow can be copied to a custom workflow where if the activity is extend an offer the referrer is identified and a mail is sent as a notification.
b)Periodic notifications:
Approach 1: create a report which is scheduled periodically to send mails.
Approach 2: use a workflow and trigger the event for this workflow periodically.
c) There is already a standard workflow for it available... explore the options........ some of the details i have mentioned in step a)
d) Ya tracking is there but it is administrator tracking transaction is sost........
Regards.
Divya

Similar Messages

E-recruitment - Role based restrictions on Active Queries - High Priority

Requirement - Do we have an option to restrict the queries in recruiter 'active queries list' (work center) based on roles.
for example: Restricted recriter should not be allowed to view Back ground checks query. and Talent Groups query.
Version - E-rec 604 support pack 5. Webdynpro Interface, seperate front end and back end - candidate Scenerios #3 as per Note 1017866.
Request e-rec Pro's to post the solution, if they have faced this issue in there e-rec implementation exp.
Thanks & Regards,
David.
Edited by: SAPERECSDN1 on Oct 12, 2010 6:25 PM

Hello,
You can check out transaction POWL_QUERYR. Through this you can specify the roles to be assigned to the role. Through transaction POWL_QUERYU you can even specify the roles to be assigned for a specific user. You can copy the specific roles required and assign them to the roles. Any role which is not assigned to specific role will appear to all the roles that have authorization to the workcenter object.
Regards,

Error after implementing SP11 Patch 5 for 7.5 MS

After implementing SP11 Patch 5 for BPC 7.5 the SPRunConversion function (which worked find under SP07) no longer works. Every time that the function runs an error FX-160 is generated indicating that there is No Entity selected.
I have modified all of the applications, optimized all of the applications, and reprocessed all of the rate related dimension files.
Has anyone else run into this issue with the stored procedure after upgrading to patch 5 on SP11?

Hey Experts,
other templates working fine (personell admin. personell time, organizational management, travelmngt.)!
The templates running in the 3.5 BW....but since the update of our testsystem the e-recruiting templates give back these errors.
We dont wanna initialize the migration of templates and other objects to 7.0 now. Maybe in a few months.
Could it be that several (in my case the e-Recruiting Templates/Queries) 3.5 objects never be running without migration?
Thx for your answers!!!
kind regards,
moriz

Queries on Event Notification Service

Hi,
I have installed the System Messaging Server 6 2005Q1 in Linux and wish to use the Event Notification Service for the Mail Server. I have the following queries on the ENS
1) Does it follow the SUBSCRIBE/NOTIFY dialog under SIP?
2) The enp:// type url used for subscription and notification refer to Event Notification Protocol or is it something proprietary to SUN ENS?
Regds,
N.Ramki

Hi,
I wished to check on the notifyplugin parameters set for the ENS and used the configutil tool
./configutil -o local.store.notifyplugin.<eventType>.enable
and for none of the event types (newMsg, ReadMsg etc) any value was returned.
Could we add these parameters and the value we wish to set using the configutil? Or are there other means of doing it?
Regds,
N.Ramki

Queries related to Notification : Tcode : QM02 and QM03 ( SAP ECC 6.0)

Hello,
In tcode qm02 i can see the action box window. But if i display the same document using QM03 i dont see the action box window. Is it possible to display action box window while displaying the document using qm03.
Thanks in advance.
Hem

Hello Hemaraaja,
In notification display mode (QM03) only those action box functions are available which are defined as Documentation 'None' functions.
For the functions which are defined to be documented as activity or as task, the notification needs to be updated when executing the functions and therefore, these can only be displayed when changing the notification.
See the following setting:
Transaction QCC2
-> Notification Processing
-> Additional Notification Functions
->Define Action Box
- Define Functions for the Action Box
(Select the correspondent activity and view the detail)
You need a usage i.e. B5 (change and display)
defined as notification and task
and documentation N None.
This should be possible.
Hope that this information helps resolve your issue.
Regards,
Isabelle

Refreshing POWL Queries in e-Recruiting

Hi All,
I need some help regarding POWL Queries.
If I switch from one link - My Open Requisitions to other link My New Applications, then REFRESH is not happening.
Could you please help me to solve this issue.
Thanks,
Anil

You can schedule the refresh by running a background job, please have a look at the following link for more information:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/42/d6652b755c1630e10000000a1553f7/frameset.htm
The following text is qouted from the above SAP documentation link:
POWL_WLOAD (Refresh Active POWL Queries)
You can use this report to update queries. If you schedule the report as a background job, for example, you can update the queries overnight. Users then have access to the updated data when they start work, without having to refresh the data themselves. This is a way of controlling the server load.

Queries:Editable ALV - Without OO concept and BAPI for Quality notification

Hi Abaper's,
1. Is there a possibility of giving F4 help for an editable field in Classical ALV ?
2. Could anyone suggest bapi for changing notification status in QM02 ? Approving/Rejecting/Closing Notifications.
Regards,
Kausthub

MSS Requisitions is not moving to Recruiter's POWL and system is throwing the errors.

Hi everyone,
Hope all are doing in good spirit.
I have an issue in regards with Requisition Creation and its related process.
I am working in Standalone architecture where Recruiting server is in another instance apart from HR system.
We are using WS45600028 standard workflow.
When Manager submits the Requisition to higher level manager to approve, its done successfully and the notification is going to the Manager. But after approval, Requisition is not going to Requiter's POWL queries.
I have maintained Support Group, Lead Recruiter in it and assigned this to Requisition.
I have checked HRP5131 table. But there is no SOBID which sould be flaged as Lead Recruiter.
When Higher level Manager approves the Requisition, It is successful bu there is an error in slg1.
Error: Error when ending the Work item 0000007704 in HR system.
The system returned the call of interface SAP_WAPI_WRITE_CONTAINER in this context
System Response:
Call ended with an error. The function was not executed.
Procedure: Remove call.
At the same system is throwing the error for the User (This user is used for RFC creation using with transaction SM59): No candidate for this User.
Details of error: The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77
Procedure for system administration:
Check the context in which the error occurs.
Since it it probably program error and not an input error, you should contact SAP.
Can you please look into the above issue and address me if you have any solution for the same.
Any help would be greatly appreciated.
Thank you.
Regards,
Sekhar

Hi Nicloe,
Thank you very much for your response.
I have done the data transfer from HR system to E-Rec system through ALE iDoc using PFAL.
All the is transferred and corresponding NA, CP, BP generated in E-Rec for P.
All the users(Recruiter, Managers and Recruiting Admin) data have transferred to E-Rec System.
But when Manager is creating the Requisition Request, it going to his higher level manager for approval and its been approved successfully. Later it is not updating the Recruiter's POWL.
In DB table HRP5125 Requisition data is created but with only few details like Start and End date, Object ID. in E-Rec system.
In HRP5131, NB related data is there but there is no SOBID for lead Recruiter.
Immediately i am getting errors in both HR and E-Rec systems as follows after the Requisition got approved.
In HR system, Error when ending the Work item 0000007704. Workflow completed successfully but still here is an error.
In E-Rec systemThe error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77.
And system says, Since it it probably program error and not an input error, you should contact SAP.
I heard that there might be an inconsistency in NA, BP, CP when we do PFAL transaction for data transfers. Can you suggest me to raise SAP ticket in this context?
Or Did i miss any configuration in this connection?
What can be done now to fix this? I am working EHP 5 and SP level is 11.
Can you please let me know. Kindly help me out of it as i am struck with this since very long time.
Thank you.
Regards,
Sekhar

Service desk: Hide links (queries) in the work center view

Hi,
we are using the service desk towards our customers.
Basically we have to sets of roles: one for consultants (ourselves) and one for our customers.
Our customers are entering the service desk through a web-interface.
If the consultants enters the web-interface, they can see reports and queries to the left, and they can open and edit tickets.
If the customers enters the web-interface, they cannot see queries and reports in the left navigation bar, and they can not open and edit tickets.
Now we need a third possibility:
A customer need to open and edit tickets, but they should not be allowed to define (or even execute) queries.
Because when they can define queries, they get access to see all other customers tickets. And that is not good.
How to obtain this?
Thanks a lot in advance.
/ peter

Based on your comments, I take it that you may not implementing a formal first level support who can perform these tasks as recommended by solman standard. If you are, your customer can request reassignment using their reply option, and the support tech performs the task. You can implement some sort of email notification process to inform the new BP.
Alternatively, I can suggest two modifications if you have a developer at your disposal:
1) in your solution manager system, clone the incident create web dynpro to ensure population of the required fields to the customer and to suit your requirement. Here you can also remove the SU15 text id checks.
2) in your satellite system, modify the function group which triggers the create incident process and have it launch the cloned web dynpro above.
My apologies, I don't have access to a solman system immediately to give you the exact object names for the above suggestions.
Cheers,
P

Notifications not going to the contact person

Hello Friends,
Scenario - When i create an RFI Customer activity in a CSR and set its status to 'Requested Customer'', a notification (more information is required) goes to the contact person and the team lead of CRO (Customer Responsible Organization). If the customer does not reply for 3 days (in case of a High Severity CSR) or 7 days (in case of severities other than High), then reminder notifications (more information required - reminder) get triggered which go to the contact person and the team leads of CRO.
Problem - In the first case,the notification (more information is required) goes to the contact person and the team lead of CRO (Customer Responsible Organization) where as in the second case, the reminder notifications do not go to the contact person, but they go to the team leads of CRO.
Analysis - There are 2 workflows that get triggered when the RFI Customer activity in a CSR and set its status to 'Requested Customer''. The first one sends the notification (more information is required) to the contact person and team leads of CRO immediately. The other workflow checks whether the customer has replied for 3 days (in case of a High Severity CSR) or 7 days (in case of severities other than High), and then sends the notification to the contact person and team leads of the CRO. I have checked the bindings, tasks, receiver rules and the methods in both these workflows. They are exactly similar. The only difference in these workflows is the wait step added in the second workflow.
Do you have any clue as to what is the reason behind the second workflow not sending the notifications to the contact person ?
Appreciate your help and timely response.
Thanks
Prashant

Hello Rick,
Thank you for your response. Here are the answers to your queries -
Question -->Is a mail being sent to the same email address in both workflows with SendMail, and only working in one of them?
Answer --> Yes
Question -->There must be some other difference other than the wait step.
Answer --> The difference between the 2 workflows is mentioned step by step as below -
Workflow for which the notifications are sent to the contact person and team lead of CRO
Step 1 --> Condition step whether the email address exists or not.
If No --> Sends a mail to the LDA (Local Database Administrator) to maintain the email address of the contact person
If Yes --> Goto Step 2
Step 2 --> Condition step whether the Severity of the CSR is High or not
If Yes --> Send step (to send the email notifications to the contact person and team lead of CRO)
If No --> Send step (to send the email notifications to the contact person and team lead of CRO)
Workflow for which the notifications are not sent to the contact person and team lead of CRO
Step 1 --> Condition step whether the email address exists or not.
If No --> Sends a mail to the LDA (Local Database Administrator) to maintain the email address of the contact person
If Yes --> Goto Step 2
Step 2 --> Condition step whether the Severity of the CSR is High or not
If High - Wait Step (waits for 3 days before sending the notifications to the contact person and team lead of CRO)
If Other - Wait Step (waits for 7 days before sending the notifications to the contact person and team lead of CRO)
Step 3 --> Condition step to check the CSR Status (to check whether the customer has replied or not)
If Yes(customer replied) --> End workflow
If No (customer has not replied)--> Send step (to send the email notifications to the contact person and team lead of CRO)
Question -->How have you implemented the wait step? Does it fetch the address before or after the wait?
Answer --> The email address is fetched at the very first step.
Question -->What happens if you make a test workflow with just the Sendmail step and send to the same address?
Answer --> The notification goes to the same email address.
Kindly let me know if the information that i have provided is comprehensive enough. Your help will be deeply appreciated.
Thanks
Prashant

Facebook Notifications - How to turn them off completely?

No matter what I do I keep getting them in my notifications tab.
I don't want to have to open each and every notification just to get rid of them. Right now it's telling me every fart and queef going on Facebook. I turned it off in Options, everything is unchecked. I also set the News Feed to NEVER update. I also logged into Facebook on a computer and set everything to off. Email notifications are also off.
Any help? I did a search and nothing shows to be successful. Please help!
I had this rekindled love for Blackberry and I am about to lose all faith over this issue.
Here is the opposite issue. I'd like to know how to replicate this.
http://supportforums.blackberry.com/t5/Downloaded-applications-for/No-Facebook-notification/td-p/140...
RIM really needs to get it together. People that want notifications can't get them, people that don't want it at all get them.

You guys? This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here. You would have noticed this in the EULA and message upon registration.
Do you not want to see the Facebook notification icon on the homescreen notification bar?
Options > Device > Applications > see Facebook in the list? Press the Menu key > Delete.
Done.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Error while using Recruitment application in ESS Portal

Hi Experts,
We are facing two issues when we are using recruitment application.
By this applicaton,the concerned can raise a requirement to the recruitment dept.
Some users are uanble to use the application.
After filling the data,some users are getting the error as "Unable to send E mail notification and can not complete action.This activity could not be read.
And another error of the application is after completion of enrtering details some users are getting the error message as " HR Requisition request successfully created with ID XXXXXXXXXX .Request is assigned to NULL.
Kindly help me out for the resolution of the issues.
Regards,
Sairam.

Hi Andy,
Thanks for the reply.
We are not using e-recruitment.
We have developed a portal application called Recruitment application.
By this user can raise the requirements in his deprtament and time to be filled.
E mails were already there in in communications infotype.
Please advice me to resolve the problem.
Regards,
sairam.

Orgigin of an applicant in SAP e-Recruiting

Dear guru's
Is there a column or field within a requistion overview in which the recruiter can view the origigin of an applicant in that requisition? For example, the difference between a applicant, who applied himself or was assigned to the application by a recruiter.
Hope you can help me out.
Kind regards,
L.Tielen
Edited by: L. Tielen on Jul 16, 2010 4:11 PM

Hi,
One way to find this out is from the assignments list of the requisition. If the applicant has applied to the job, then you would find a date in the column "Applied on". If this column has no entries for a candidate, you can take it that a recruiter assigned the candidate to the requisition.
However, as Roman put it, the standard has no way to show this difference in a requisition overview.
Just to add to this: if a recruiter has assigned a candidate to a requisition, you wouldn't find a date in the column "Applied on" AND you'll find the activity Correspondence: Rejection disabled. No candidate would want to receive a rejection notification for a job s/he hasn't applied for!
Cheers
Shyamu
Edited by: Shyamu Murthy on Jul 23, 2010 1:33 PM

Error during page load in e-Recruitment

Hi SAPiians,
We are implementing SAP e-Recuitment using BSPs. We are done with the configuration part and also configured the ALE.
Also, generated the URLs using RCF_GENERATE_URLS. When i copy and paste the URL in a browser, the logon page pops up. When i enter the username(has all the e-Rec specific objects assigned to it) and password, it ends in a short dump. Below is the text:
Note
The following error text was processed in the system DER : Access via 'NULL' object reference not possible. The error occurred on the application server DV35_DER_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_HEADINCLUDE==========CP
Method: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Method: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_HEADINCLUDE==========CP
Method: IF_BSP_PAGE_CONTEXT~ELEMENT_PROCESS of program CL_BSP_PAGE_CONTEXT===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DER in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server DV35_DER_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server DV35_DER_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: RCF_UNREG -l: E -s: DER -i: DV35_DER_01 -w: 0 -d: 20081017 -t: 145914 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED
The ST22 dump has following message:
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_HTMLB_HEADINCLUDE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_HTMLB_HEADINCLUDE==========CP" or "CL_HTMLB_HEADINCLUDE==========CCIMP"
"IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
    SAP-Release 700
    Application server... "DV35"
    Network address...... "10.8.54.191"
    Operating system..... "SunOS"
    Release.............. "5.9"
    Hardware type........ "sun4u"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "DV35"
    Database type..... "ORACLE"
    Database name..... "DER"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Feb 3 2008 21:08:24"
    create on........ "SunOS 5.9 Generic_117171-13 sun4u"
    Database version. "OCI_102 (10.2.0.2.0) "
    Patch level. 146
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "SunOS 5.9, SunOS 5.10"
    Memory consumption
    Roll.... 16192
    EM...... 4189848
    Heap.... 0
    Page.... 16384
    MM Used. 2078976
    MM Free. 2108272
User and Transaction
    Client.............. 200
    User................ "RCF_UNREG"
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "48F75A37D7085D19E10000000A0836BF"
    Program............. "CL_HTMLB_HEADINCLUDE==========CP"
    Screen.............. "SAPMHTTP 0010"
    Screen Line......... 2
    Information on Caller ofr "HTTP" Connection:
    Plug-in Type.......... "HTTP"
    Caller IP............. "10.125.6.207"
    Caller Port........... 8001
    Universal Resource Id. "/sap/bc/bsp/sap/hrrcf_cand_reg/application.do"
Source Code Extract
Line SourceCde
106 **   Wednesday
107 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20030101' IMPORTING week = week_num.
108 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 8. endif.
109 *
110 **   Thursday
111 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20040101' IMPORTING week = week_num.
112 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 16. endif.
113 *
114 **   Friday
115 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '19990101' IMPORTING week = week_num.
116 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 32. endif.
117 *
118 **   Saturday
119 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20000101' IMPORTING week = week_num.
120 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 64. endif.
121 *
122 **   Sunday
123 *    CALL FUNCTION 'DATE_GET_WEEK' EXPORTING date = '20060101' IMPORTING week = week_num.
124 *    IF week_num+4(2) = '01'. firstweekcode = firstweekcode + 1. endif.
125 *
126 *    sfirstweekcode = firstweekcode.
127
128 *   Get date format
129 *    SELECT SINGLE datfm FROM usr01 INTO datfm WHERE bname = sy-uname.
130 *    if datfm is initial.
131 *      datfm = '1'.
132 *    endif.
133
134     data: stylepath type string,
134     data: stylepath type string,
135          popuppath type string.
136          stylepath = headinclude->mc_render_lib_d2_system->stylepath.
137     popuppath = stylepath.
138
The error is at line 136.
What could be the problem ?? I have done all the config related to e-Recruitment... Also activated most of the SICF services...
Could something be pending from BASIS front ?? Below are some of the keywords found in SM21 log.
1. Run-time error "OBJECTS_OBJREF_NOT_ASSIGNED" occurred
2. Task: 23834, Process:Dialog work process No. 001, Program: SAPMHTTP, Problem Class: Transaction problem, Package:SABP
Module Name:abdata, Line:0430, Error text:ab_DataAddrRead
Please guide...
Thanks.
Shashank Shirali

Hi Friends,
The problem is solved. The issue was with SICF service activation.
Certain system services were not activated.
Thanks,
Shashank Shirali

E-recruiting notifications queries

Similar Messages

Maybe you are looking for