E-RECRUITING OPEN SEARCH FOR CANDIDATE RECEIVING MULTIPLE ERROR LOGS IN SLG

E-Recruiting Netweaver 7.0 separate system
Non XI R3 system for HR
CL_HRRCF_CANDIDATE_ADMIN_BL error in search results
Hello,
Within the "Search for Candidates" page, when doing an open search, we only receive one candidate. Also with transaction code SLG1 there are multiple error logs stating that a candidate could not be found.
What does the error message mean and how do we resolve what is causing them? If resolved will we get a full open search within the "Search for Candidates" page?
Specific error: No candidate could be found for NA 50003803.
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 345.
Error class: CX_HRRCF_MAINTAIN_OBJECT
Appreciate any help,
Cindy

I have solved this issue.
Pass the logon data to the service for the external candidate registration
Do the indexing and configuire the SES objects and index as well.
Configure the missing entries in the serach profile/templates

Similar Messages

  • How to search for a standard sap error message

    Hi all,
        I want to know where exactly we need to search for a standard sap error message ( For example like STACK_NO_ROLL_MEMORY).
        I am searching the same in sap market place/oss note search...but don't see what I am looking for ...
       Could you please help on the same ?
    Thanks,

    Hi Shravan,
    Normally system throws up an error when it reaches the threshold point. Normally the threshold / critical points are arrived at by considering the SAP recommended values and what is the sytem configuration you have got.
    In true project scenario because of budget constraints we might not be able to have ideal system configuration which SAP recommends , in that case we have to tune to the system perform at an optimum level considering various aspects
    In yr case memory parameters should have been set at level , but for yr job it needed more memory which it could not allocate and throwed an error.
    hope i have answered yr question .
    Regards
    Balaji

  • I have searched for solutions to the error 13019, but everyone with the problem doe'st manually manage their music like I do. I really don't want to have to sync and gothrough that mess. Help? solution for manually managing videos and music!!

    I have searched for solutions to the error 13019, but everyone with the problem doesn't manually manage their music like I do. I really don't want to have to sync and go through that mess. Please Help! solution for manually managing videos and music!!

    - Make an appointment at the Genius Bar of an Apple store and hear what they hae to say. It is free.
    Apple Retail Store - Genius Bar                          
    you can turn on Assistive Touch it adds the Power and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch

  • Internal Error in Search for Candidate in Talent Pool in E-Recruitment

    Hi All,
    I've problem in Search in Candidates in Talent Pool in E-Recruitment in SAP E-Recruitment. When I search with text, it just gives internal error. I digged into the BSP Application as well. In the funtion call "SDOK_INDEX_COMBINED_SEARCH_XML" returns error "document area not specified" and raises an internal error. Anyone faced similar issue??? Please Help!!!
    Thx,
    Anand

    Well, obviously you never used any component of KPRO yet.
    Just upload an attachment onto the candidate's profile.
    An index category should automatically be created.
    Also generate search profiles and plan the periodical service RCF_PERIODICAL_SERVICES. You can find the documentation about this report and search profile via IMG.
    Also look if HR_KW is checked within transaction SKPR06.
    Message was edited by: Sebastian Menger

  • Searching for links across multiple pdf files

    We have thousands of pdf files that are being moved to a new website. Some of these pdf files have links within them (either as text or as a hyperlink). This number is unknown.
    The issue is how to programmatically search across multiple pdf files (numbering in the thousands) looking for links using a regular expression or part of a path. This will have to be able to search behind the text and search for the link url.
    We first need to identify the number of files with links and create a list of the files with links that need modifying. If the number is too great to modify manually, then we would need the ability to programmatically edit these links.
    The pdf files are stored in a database. Also, the pdf files are different versions and some are password protected.
    Is there an Adobe product that will perform this? If not, are there any 3rd party vendor products that will accomplish this?
    Thanks in advance for your help.

    I have no solution, but a thought: the database factor may seem to be
    a killer. But you could look for a solution designed to read PDF files
    from a web site (by spidering or from a list), which would presumably
    load them.
    Or could do a one off extraction of the files from the database into a
    directory and use that for your process. Probably a very good idea,
    since extracting all files from the database is likely to be costly
    and hammer the server (but can be scheduled at a sensible pace), while
    the search process will (if it is possible at all) doubtless need to
    be run countless times.
    Aandi Inston

  • Search for photos with multiple keywords

    I'm trying to figure out if it's possible to search for photos that have multiple keywords.   When selecting multiple keywords in a Bridge search the default behavior is to find photos that have any of the keywords rather than all of the keyword.  In other words I want to do an AND keyboard rather than an OR search.

    You should be able to do so in the find menu of Bridge (Edit/Find or cmd+F)
    With the plus sign you can add an extra (and) keyword to it.
    A shortcut may be to first find one keyword and then use the filter panel
    keyword section and select the other wished keywords by putting a checkmark
    in front, only the selected files will show in the content window.
    In other words I want to do an AND keyboard rather than an OR search.

  • Search Criteria - job search for candidate - TREX

    I need to add branches field to  selection criteria for job search function( candidate pages). in standard we have
    functional area,hirarchy level,country,Work contract type,Education level.
    i was able to add branches successful , but when i search which branches no results .
    what i have to configure to get the excepted results.
    thanks in advance

    When add new elements to a search mask, via customizing, you need to add that specific field also to the search profile.
    In a search mask, you have the infocategory and field stored. Assign those to the search profile you want to enhance. In case of a requisition it is ERC_REQ. In case of postings INT_POER and EXT_CAND.
    After doing this, you need to recreate search profiles. After indexing you will find it.

  • QT movies won't open, just search for clip, and then error 128

    I have filmed a lot of digital movies when I was an undergraduate studying film and I exported them all as quicktime movies to save in my computer; however, for some unknown reason, whenever I try to re-watch those movies, QT searches for "Clip 01" or whatever and says that it cannot open the movie without this clip, and then gives me "error (-128)." What is up with this? I thought once I exported the film as a QT .mov that would be the only file I needed. I don't understand why it needs to search for a clip. Thanks for anyones help, I'm trying to piece together a demo reel and now I don't have access to about 75% of my work.
    G4 Desktop   Mac OS X (10.4.4)   Dual Processor 1.25 & 2 GB of RAM

    When you "Save as" QuickTime Movie you get two choices... Reference movie and Self contained.
    Self contained creates a movie with all needed media (video and audio clips) within the .mov file.
    Reference movie creates a very small file that tells QuickTime where to find the clips to play and does not copy those clips into the mov file.

  • How can I search for files on multiple servers at one time?

    When I hit command+F, and use spotlight to search for files, I'm only given the opportunity to search for those files in three places: "This Mac", "Shared", and then the server or external HD that is mounted. However, in the past I was able to check a box for all mounted/connected servers/HDs, and then do a search in all of them at the same time. I CAN'T FIND THIS OPTION IN LEOPARD AND IT IS ANNOYING ME BIG TIME.
    Hopefully there is a simple solution that I've overlooked.
    Please help!

    no

  • E-Recruitment -- Assign Columns for candidate shortlist

    In the IMG, I try customize the IMG step, Assign Columns for Candidate shortlist".
    When I select the process, and try customize, I do not see any columns displayed at all. This same for all process. Do I do other customizing step prior to this.
    SAP Help has no information

    Hello,
    there should be a default customizing delivered for table T77RCF_CDCY_LIST which is the customizing table behind this IMG step.
    I could imagine 2 reasons for seeing no entries. If you have already applied your customer customizing for processes and activities you might not see entries if you have used your own process IDs which differ from the default delivery. This could be easily checkt by having a look into the table using SE11 / SE 16.
    If there are no entries in the table at all It might be that the content from the table was not transfered from client 000 into your work client during the client copy or after the upgrade / installation. So check the content of the table in client 000 or ask a basis guy if you have no access to this client.
    Kind Regards
    Roman

  • Illustrator Won't Open Searching for Server Error

    I have downloaded Illustrator, Photoshop, InDesign from the Creative Cloud. When I try to open the app, I get an error that tells me "Cannot find the server "NDC-DiskStation" (my server name)" I've contacted Adobe about 5 times they keep sending me to Apple, which always sends me back to Adobe. I can open my app when I am connected to my server at my office, but cannot open it when not connected. However, I downloaded the app while not connected to my MacBookPro lap top. Please Help Anyone! My server is a Synology Drive.

    Have you tried trashing the prefs? Simply sounds like some file path info got sticky...
    Mylenium

  • I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

    I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • Unable to download itunes 10.5 for windows 7. multiple errors

    I get multiple errors while downloading itunes 10.5
    during set up:
    1. apple mobile device failed to start. Verify you have sufficient privileges to start system services.
    2. An error occured during installation of assembly "Microsoft.VC80.CRT
    error when trying to open itunes:
    Apple application software not found.  please uninstall, then instal again. Error 2
    Ive already tried to uninstal and re install.  Any help would be great!

    I also have problems just like you, but in order.
    Fist .      An error occured during installation of assembly "Microsoft.VC80.CRT
    Second. Apple mobile device failed to start. Verify you have sufficient privileges to start system services.
    LOL Apple =)) .
    Now just wait for apple confirmed that bug, and fix it.

  • Exchange 2013 - Location for SMTP Receive Connector verbose logs

    So I'm trying to troubleshoot a relay failure:
    + 1415809433 51000008 Wed Nov 12 11:23:53 2014
    F:[email protected]
    T:[email protected]
    A:c:\v1\temp\200046.pdf
    S:Sales Order Number  200046
    ! Error in SMTP conversation:
      550 5.7.1 Unable to relay
      dbmailsend error 8 (Error in SMTP conversation).
    ! Command-line dump follows (delimited by colons):
      [0]:c:\v1\dbmail\bin\dbmailsend:
      [1]:-vv:
      [2]:-a:
      [3]:c:\v1\temp\200046.pdf:
      [4]:-s:
      [5]:Sales Order Number  200046:
      [6]:-t:
      [7]:[email protected]
      [8]:-r:
      [9]:[email protected]
      [10]:-h:
      [11]:C:\Users\sagert\AppData\Local\Temp\dbf72A3.tmp:
    ! Error in SMTP conversation:
      451 4.7.0 Temporary server error. Please try again later. PRX5
      dbmailsend error 8 (Error in SMTP conversation).
    ! Unable to send report to administrator.
    Note the SMTP Converstion error, I've done the steps in this forum article:
    https://social.technet.microsoft.com/Forums/fr-FR/fc26dac5-d4e2-49da-903d-361ea8b85388/451-470-temporary-server-error-please-try-again-later-prx5?forum=exchangesvrgeneral
    but the issue still exists... so I need to review my Exchange logs for this relay (I've enabled verbose logging on the specific receive connector this should be using)

    Fromhttp://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
    Set-ReceiveConnector
    The location of the Receive connector protocol logs for all Receive connectors configured in the Transport service on a Mailbox server or an Edge server is specified by using the Set-TransportService cmdlet with the ReceiveProtocolLogPath parameter.
    Run a get-transportservice|fl *logpath* and that should get you what you need.

  • Solution for sending/receiving multiple accounts via Mail and web Gmail

    I don't know why I haven't seen this before, especially since I've posted about this with no solutions, but I just discovered I can now do the following:
    I have multiple email accounts from multiple domain names, and can send and receive from all accounts through Apple Mail as well as only one Gmail web client.
    At the gmail.com web client, I go to Settings: Accounts and Import and click on Send mail from another address. I fill in the obvious info for each email account I want to add, choose 'Send through Gmail', and follow instructions to verify.
    At the Apple Mail client, after configuring my Gmail account (instructions on how to do this are all over the web), I go to Preferences: choose the Gmail account: Account Information: Email Address and add in all the email addresses I want to use separated by commas (ie [email protected], [email protected], [email protected])
    Now when I send to or from any of these emails, it sends and receives with the correct From: and To: emails, as well as replies to the correct emails.
    As for the iPhone, I just add accounts for each of the emails I want to send from and put in wrong info for the incoming mail (ignoring the initial 'can't connect' pop-ups). I receive all mail just fine and can send.
    Again, this didn't work a few months ago, but it does now. Maybe I'm missing something without realizing it yet.

    godaddy accounts sometimes like port 80 vs 587 as well.    just to piggy back on your thread.

Maybe you are looking for