E-Recruiting problem with EEO Questionnaire

Hello,
I am having a problem getting a new EEO questionnaire to attach to a Process Template. When I create a Process Template and add an Application Entry process, I then select Activity "Questionnaire in Application Form". When I search for the questionnaire, only the job related questionnaires that I created show up. I've read a few other posts relating to this, and can confirm that the Application Wizard container does include the "Application Wizard: Questionnaire" element, and the questions and questionnaire have a status of "released". Any help would be greatly appreciated.
We are running 3.0 SP 12 in a stand-alone environment.
Thank you,
Leeanna Travis

Hi Leeanna
Have u checked the node Assign Catogeries to Activity Types (Under Questionaires Node) (View: V77RCF_QACAT2ACT)
TYPE************NAME*****************************Category******************
7030*************Equal Employment Questionnaire** 1******* Equal Employment Information
have u checked the Application Wizard for the above entry
Regards,
Raghav

Similar Messages

Recruiting problem with the candidate search by trex with questionnaires

Hi Gurus,
I am trying to search candidates using trex in recruiting by candidate_questionnaires but the trex does not show any result. How can I solve it?
When candidates register theirselves on internet, they complete questionnaires that I have added in the apllication wizard.
But the problem starts when I want to search candidates by the answers that they have complete in this questionnaire. So I select the criteria search candidate questionnaire, then I select the questionnaire and then the answer and I run the searh. I know that the results shown are always about others requisitions and not the one that I am doing the search. But in my case candidates are assigned in other requisition with the same process template so I do not know where is the problem, because other sort of search works fine. This is the only one that it does not work.
In addition, I have run the report RCF_CHECK_SEARCH_SETTINGS but the result is that all the parameters are fine except that I have not implement the badi HRAHAP00_FOLLOW_UP_SES. May I have to implement?
Moreover I have seen that when I select the answer to search, any operator (element of selection mask) is assigned but I have read that it is correct because I am using the search profile "int_cand" with the category "candidate_document" that it use in the mask search candidate_questionnaire.
In conclusion, I don't know how I can solve this problem with trex? Any idea?
Thanks in advance,
Juanjo Garcin.

I've already done it.
Do you think this will help?
I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

E-Recruiting: Problems with search profile and serach templates

Hi Recruiting-Experts,
I´m facing problems with "Search Profiles" and "Search Templates"
(Customizing SPRO --> SAP-E-Recruiting --> Recruitment --> Talent Warehouse --> Candidate --> Candidate Search )
Out customers wants me to add a new search criterion to the talent search. It's a customer-field (type 'd' --> Date) belonging to infotype 5106.
Unfortunately, it doesn't work. The hit list is always empty.
What I did:
Customizing (see above)
Updated search profile (report RCF_RECREATE_SEARCH_PROFILES)
The result:
I can see and choose the new search criterion on talent warehouse search site (recruiters startpage)
I can find the data (internal format yyyymmdd) via transaction SKPR07 (see XML below, ZZEARLIEST_ENTRY 20090901)
By the way, the hit list is also empty when adding and searching for birthdate.
Has it got to do with the date stored in internal format?
Thanks for any comments / help.
Regards
CHRIS
=========================================================================

Hi Sebastian,
thanks for your quick answer.
That's why I didn't get it done for hours yesterday.
Thanks again,
Regards
CHRIS

E-recruiting - Problems with candidate search

Hi experts,
I'm trying to test some enhancements in E-recruiting and I'm facing problems with the candidate search. At firts I thought the problem was with Trex, but after run report RCF_RECREATE_SEARCH_PROFILES I've found the errors below:
Error in program CL_HRRCF_SPB_CANDIDATE========CM003 line51
Error in program CL_HRRCF_SP_BUILDER===========CM003 line115
Error in dinamic calling method for class CL_HRRCF_CEC_INFOTYPE
Error in program CL_HRRCF_CEC_INFOTYPE=========CM005 line 83
Error in program CL_HRRCF_CEC_INFOTYPE=========CM005 line 68
Does anybody know what these errors mean?
Thanks in advance for any kind of help!
Best regards,
Thais

Hi again,
Based on the reply I got for this thread I corrected an inconsistency I've found in the category of seach table, it was using a table as structure instead of an infotype. I've run report RCF_RECREATE_SEARCH_PROFILES again and the error is still the same.
As other trex searches such as advertise search is not working, I believe the problem is not only this, because this other seach uses another search profile that was not enhanced.
Does anybody has another suggestion?
Thanks in advance for any input!
Best regards,
Thais

E-Recruiting :Problem with BUPA_CENTRAL_CHANGE for HRALXSYNC

Dear Experts,
We have a problem with the function module BUPA_CENTRAL_CHANGE while executing the report HRALXSYNC & trying to repair the object P.
Please note that the sample implementations for the relevant BADIs are activated. Relevant entries are maintained in T77S0.The business partner details are also maintained.
In the report HRALXSYNC, we do the following :
Select an object P for whom there is no BP or NA (No candidate exists). The Basic data column shows RED for this object P.
On clicking the 'Start Repair' function, the following happens.
The Basic data column become GREEN indicating that the data is synchronised & a new NA object is created. But we also get the following error message :
<Start of error messages>
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE============CM002 line 573
Serious error; see log
The error occurred in program CL_HRRCF_ADDRESS_SERVICE======CM001 line 39
Serious error; see log
The error occurred in program CL_HRRCF_ADDRESS_SERVICE======CM00I line 257
Errors occurred during call of function module BUPA_CENTRAL_CHANGE
The error occurred in program CL_HRRCF_ADDRESS_SERVICE======CM00I line 137
Errors occurred during call of function module BUPA_CENTRAL_CHANGE
<End of error message>
The long text for the error mesasge for BUPA_CENTRAL_CHANGE shows this :
<start of message>
Errors occurred during call of function module BUPA_CENTRAL_CHANGE
Message no. R11335
Diagnosis
The business partner BAPIs were called up incorrectly. The indicator IV_X_SAVE was given differing settings when the modules were called.
Within a LUW, the indicator must be consistently set or not set.
System Response
The indicator IV_X_SAVE should be set or not set once off. Up to COMMIT WORK the content of the field may not be changed, as problems will otherwise occur with the internal memory, thus leading to runtime errors.
<end of message>
Can any of you please shed some light on this?
What is the significance of the Parameter IV_X_SAVE ? Should this be blank or 'X'?
What customizations or BP settings are we missing here? Infact, any lead would be helpful
Many thanks,
Sowmya

Hi Sebastian,
The problem is solved with the application of this note. Thanks a lot for your input.
Best Regards,
Sowmya

E Recruiting : Race/Gender (EEO Questionnaire) link to candidate profile

Hi All,
When a candidate (external/internal) fills out the EEO questionnaire (Race/Gender) for the first time it should get stored/linked to his profile so that it should not ask him again when he is filling out another job application
Currently there is no such linkage. When the existing candidate comes back to fill another job application the EEO questionnaire comes up blank again for him to fill.
This should not happen, it should show him the existing selections he made earlier and he should be able to change them if required.
Any clue as to how this could be achieved. Appreciate any kind of input.
Thanks.

Well,
the only feasible is a workflow or periodical service which sends out the e-mail.
Adding to the profile is not that easy. The questionnaire step in the application wizard is connected to the process template or questionnaire step in the requisition. So there is some place where you can define the questionnaire for the wizard.
For the profile there is nothing like a process template. So what you would have to do is programming a custom roadmap step which reads the specific EEO questionnaire from a customizing table or a simple application where you define the "profile specific EEO questionnaire".
So that's some kind of requirement which is not just an easy to do out of the box option. It is possible, but a little bit of effort!
The customizing table or application for assigning the EEO template for profile maintenance is needed as well, if you just do the workflow
Best regards
Sebastian

Recruitment: Problem with Program Symbols

Dear friends,
I am facing a big problem in creating a standard text.
I create a new infotype named "Interview infomation" - IT9011.In this infotype has filed BETRG is used to record expect salary.
After that , I create a standard text in So10. IIn this text, want to include field PB9011-BETRG . I don't know how to do that. My friend advised that I should creat a program. My program is as follow:
TABLES: PB9011.
But, in SO10, I include PB9011-BETRG, nothing happenned .
Let me khow, What have I do to use that field into my text.
Thanks so much.
Warm Regard,
Sushi_Intel

Hi Vidya
I copy standard table and chage like below. But I can't get data in PB9011. Please hepl me
TABLES: T500P, P0001, PB9011.
 FORM fill_customer_structure*
 This routine declares the customer structures which*
 will be used in WinWord letters.*
 Neccessary only if customer uses WinWord*
FORM FILL_CUSTOMER_STRUCTURE.
PERFORM ADD_CUSTOMER_STRUCTURE(RPAPRT05) USING 'T500P'.*
PERFORM ADD_CUSTOMER_STRUCTURE(RPAPRT05) USING 'PB9011'.*
ENDFORM.
 FORM fill_customer_data*
 This routine fills the customer data for use in applicant*
 letters.*
FORM FILL_CUSTOMER_DATA.
SELECT SINGLE * FROM T500P*
 WHERE PERSA = P0001-WERKS .*
IF SY-SUBRC NE 0.
ENDIF.*
ENDFORM.
 FORM check_customer_exception*
 This routine determines if a MailMergeField*
 is mandantory or optional*
---> $field_name technical name of the 'empty' field*
<--- $sw_optional_field switch to declare that field optional*
FORM CHECK_CUSTOMER_EXCEPTION USING $FIELD_NAME $SW_OPTIONAL_FIELD.
DATA YES VALUE '1'.
IF $FIELD_NAME = 't500p-pfach'.
$SW_OPTIONAL_FIELD = YES.
ENDIF.
ENDFORM.
Thanks so much for your reply.
Sushi_Intel

Changing values for EEO Questionnaire Information Fields in E-Recruiting

We are implementing E-Recruiting 6.0. I have changed entries for EEO values for Race Category via the IMG SAP E-Recruiting>Recruitment>Applicant Tracking>Questionnaires>Equal Employment Opportunities-->Assign Values to Information Fields. When I attempt to create an EEO questionnaire using the new values, the old values are retained. I have been able to determine that when an EEO questionnaire is created entries are created in the T77RCF_MBO_ATTR table linking the values with a VC object, but I haven't been able to figure out if there is a way to clear out/fix the entries in that table.
Any assistance with this problem would be appreciated.

Hello Cornelia, Hello Roman,
first of all: thank you for your very fast reply. I tried to delete the cache as mentioned above and invested some hours in investigation. Your answers gave me some new searchwords and it looks like I found the solution.
I found note 830251 where SAP said, that there is a difference between old and new way of implementing Corporate Desing to BSP-Applications.
The old method is the one I mentioned above, but this works only as long as SAP_BW 3.5 SP04 is not in the system. After SAP_BW 3.5 SP04 is used, there is a new way to change the design of BSP-Applications.
Here is the link to the note:
https://service.sap.com/sap/support/notes/830251
I will try it and - for the case somebody else will ever have the same problem - post the results.
Once again thank you for your great help
Kind regards
Michael

Problem with Restricted Recruiter Requisition Status Change Approval Proces

Hello,
Our company is having a problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter. The approval notification never appears in the Recruiters approval page. The Restricted Recruiter is able to submit the request without any problems.
I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
Thanks for your assistance.
Ryan

I have been doing some digging on this matter on E-Recruiting workflow and have discovered transaction SWI2_FREQ (Work Items per Task), very useful. Upon running this utility I found 8 pending approval request tasks. I double clicked on the task to show the workflow status of each task.
I double clicked on one of the request for status change tasks for a requisition which took me to the approval request for status change of Req ########. Here I clicked on the activities tab selected the activities tab, selected the activity Approval request for status change of Requisition ######## then clicked on the execute icon.
Doing this opened up a new web browser and prompted me to login. Using the correct login credentials for this environment I click the login button and promptly recieve the error message...
Error in Web service execution
E:SWF_HTTP:050 TS51807979
At this point I am unsure of where to go...
Any help would be appreciated.
Ryan

EEO Questionnaire -- SAP E-Recruiting

How you restrict the HM and recruiting from accessing the candidates responses to the EEO questionnaire. The EEO questionnaire is included in the application wizard

Hi Raja,
If you are using e-Recruiting: ehp4 - in Requirements tab, there are 3 blocks.
1.Education Requirements
2.Qualifications
3.Questionnaires.
In Questionnaires block you can attach a Questionnaire to the Requisition.
Hope this helps.
Thanks,
Anil

Problems with E-Recruiting Data Overview Smartforms

Hello,
We recently upgraded from E-Recruiting 3.0 sp12 to sp15. During this upgrade we have noticed that our custom Data Overview Smartforms have not being displayed. Instead the system is calling the original SAP delivered forms. The problem is that in table T77RCF_UI_PARAM we have the parameters set to display the correct forms. As strange as that sounds we were able to fix most of them by changing the case, i.e. from lower to upper or upper to lower, of the BSP application name. We are still however having problems with one particular BSP application:
Name Paramtyp Parameter
HRRCF_CAND_DOVR DISPLAY_PDF Z_ER_CANDIDATE_PREVIEW
HRRCF_CAND_DOVR SF_VIEW_CAND Z_ER_CANDIDATE_PREVIEW
The SAP delivered smartform is HRRCF_CANDIDATE_PREVIEW.
This one, regardless of what case the BSP application is in, continually displayes the SAP delivered smartform.
I have verified that the custom form is indeed active. And we also went as far as appying oss notes:
Note 1017662 - T77RCF_UI_PARAM: Application name is case-sensitive
Note 1037121 - T77RCF_UI_PARAM: Length of Input Field Parameters too short
Yet another twist to this is that when I log on as an Internal Candidate and click on the Data Overview link on the external candidate personnel page the custom form is displayed. However, when I log on as an External Candidate and click on the same link the SAP delivered form is displayed.
Could this have something to do with the type of roles assigned? Just incase I verified that the roles for the External Candidate were indeed SAP_RCF_EXTERNAL_CANDIDATE and the internal role was SAP_RCF_INTERNAL_CANDIDATE.
Any help would be appreciated!
Respectfully,
Ryan

Well the error you are facing, that the external candidate does not see the custom smartform depends on a new BSP application that is delivered with SP14.
You need to copy the customizing of hrrcf_cand_dovr to hrrcf_cdovr_ext.
Regards

Problem with tree view

Hello and good morning,
i´ve got a problem with a tree view in one of our web dynpro applications.
The tree view act´s as a menu. For example:
the highest element is: personal
If you open personal you see:
recruiting
payment
and so on...
Our Problem is...
You can open the tree element by clicking on the little box left from the tree-element text.But we want that the tree-element is also "line-sensitieve". This means, the next elements should not only appear by clicking the box, also by clicking simply the line.
Is this possible.
PS: Sorry for this bad application, but i don´t know how to explain it better

method ONACTIONTOGGLE .
data:
    Elem_Context                        type ref to If_Wd_Context_Element,
    Stru_Context                        type If_Menu_Tree=>Element_Context ,
    Item_IS_OPEN                        like Stru_Context-IS_OPEN.
data parent_key type string.
    data children_loaded type wdy_boolean.
data x_node type ref to IF_WD_CONTEXT_NODE.
* get context via lead selection
Elem_Context = wd_Context->get_Element( ).
* get single attribute
Elem_Context->get_Attribute(
    exporting
      Name = `IS_OPEN`
    importing
      Value = Item_Is_Open ).
if Item_Is_Open = abap_true.
    Item_Is_Open = abap_false.
else.
    Item_Is_Open = abap_true.
endif.
Elem_Context->set_Attribute(
exporting
    Name = `IS_OPEN`
    Value = Item_Is_Open ).
endmethod.

Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps.

This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
Or is there something else you would recommend?
What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think).

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

E-Recruiting problem with EEO Questionnaire

Similar Messages

Maybe you are looking for